Mechanical components by mail order 4 / 5 2013 Gears and sprockets Standa rd Pr ecis ion Tel. +33(0) 37 496 496 www.hpceurope.com Index photos 1/3 Stainless steel spur gear stainl steel ess p.204 Moulded plastic spur gear Steel spur gear p.208 Parallel axis helical gear Steel rack stainl steel ess p.316 Stainless steel rack Flexible rack p.189 Double gear p.216 p.210 Crossed axis helical gear p.184 p.172 Spur round rack Brass spur gear p.304 p.238 Internal gear Plastic spur gear p.185 Moulded nylon rack p.192 Anti-backlash spur gear p.162 MADE TO MEASURE Contact us Plastic rack p.196 p.198 Pinion shaft p.168 p.166 Worm and wheel with shaft or bore Anti-backlash wormwheel p.138 Detachable V belts p.158 p.14 2/3 Discounts : maximum discount on price list 2012 Stock : depending on availability New : new product HTD type tooth bar stockw Timing pulley Timing belt Connecting plate for RPP type until -30% p.18 Toothed bar machined to order p.20 T typer tooth bar stock p.29 p.38 T type moulded nylon timing pulley T type timing pulley until p.42 T type timing belt -30% p.44 T type timing belt per metre p.47 Connecting plate for T type timing belt p.48 AT type tooth bar stock until p.57 AT type timing pulley p.62 AT type timing belt p.66 Chain procket p.78 p.91 Chain link stainle l ss stee AT type timing belt per metre Single chain supplied by the metre less stai t n eel s p.96 Belt tension roller New p.99 p.63 p.102 -30% p.64 Chain sprocket p.80 Chain link p.86 Single chain supplied by the metre inox p.97 Fixed tensioner plate p.104 p.98 Turn the page please Image index 3/3 Roll-Ring® self- adjusting chain tensioner Idler chain sprocket p.106 Universal tension arm p.108 Universal tension arm stainle l ss stee p.110 New p.111 Ne Steel bevel gear economy range (1:1 to 4:1) w p.116 Steel bevel gear Stainless steel bevel gear Moulded plastic bevel gear stainle l ss stee p.122 p.128 Range of PRECISION p.354-p.481 Delrin and PEEK worm and wheel p.372 Machined plastic worm and wheel p.424 Rack p.130 Bevel gear p.360 p.356 p.386 p.448 p.133 Steel worm and wheel Pinion shaft Ground spur gear Machined plastic bevel gear Spur gear p.390 Parallel axis helical gear p.396 Crossed axis helical gear p.460 p.472 Range of precision prEcision range (Quality Grade 7e25) MoDulE crossed helical gear 2.0 Pre-treated or case hardened steel - Quality grade 7e25 Din 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% Quality 25 grade 7e .options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. Part number Z Standard Hardened Teeth PXHG2.0-15R PXHG2.0-15RH 15 PXHG2.0-16R PXHG2.0-16RH 16 PXHG2.0-17R PXHG2.0-17RH 17 PXHG2.0-18R PXHG2.0-18RH 18 PXHG2.0-19R PXHG2.0-19RH 19 PXHG2.0-20R PXHG2.0-20RH 20 PXHG2.0-21R PXHG2.0-21RH 21 PXHG2.0-22R PXHG2.0-22RH 22 PXHG2.0-23R PXHG2.0-23RH 23 PXHG2.0-24R PXHG2.0-24RH 24 PXHG2.0-25R PXHG2.0-25RH 25 PXHG2.0-26R PXHG2.0-26RH 26 PXHG2.0-27R PXHG2.0-27RH 27 Dimensions in mm ØP ØD Pitch External 42,43 46,43 45,25 49,25 48,08 52,08 50,91 54,91 53,74 57,74 56,57 60,57 59,40 63,40 62,23 66,23 65,05 69,05 67,88 71,88 70,71 74,71 73,54 77,54 76,37 80,37 478 4 Volume  4 2013 ØA Bore 10 10 10 10 10 10 12 12 12 12 12 12 12 HPC ØM Boss 35 35 35 35 35 35 45 45 45 45 45 45 45 DiscounTs Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,190 - 0,065 1,12 4,09 0,346 58,92 F 97,25 F 0,190 - 0,065 1,19 4,37 0,376 60,14 F 99,27 F 0,190 - 0,065 1,16 4,26 0,408 64,91 F 107,13 F 0,250 - 0,089 1,23 4,51 0,442 67,00 F 110,52 F 0,250 - 0,089 1,30 4,76 0,478 69,39 F 114,46 F 0,250 - 0,089 1,37 5,01 0,517 70,86 F 116,95 F 0,250 - 0,089 1,44 5,27 0,703 74,22 F 122,53 F 0,250 - 0,089 1,50 5,52 0,745 80,65 F 133,08 F 0,250 - 0,089 1,57 5,77 0,789 82,24 F 135,72 F 0,250 - 0,089 1,64 6,02 0,835 86,16 F 142,17 F 0,250 - 0,089 1,61 5,90 0,883 94,04 F 155,14 F 0,250 - 0,089 1,67 6,14 0,933 95,22 F 157,20 F 0,250 - 0,089 1,74 6,37 0,985 100,00 F 165,04 F www.hpceurope.com - +33(0)4 37 496 496 bands! y e r g e th Look for 24/48h delivery* for articles in stock +33(0)4 37 496 496 - www.hpceurope.com *Contact us for full details Table of contents Image index .............................................................................................................................................................. p.1 3 Commercials informations .............................................................................................................................. p.6 8 Index icons . ........................................................................................................................................................................ p.11 Products pages .............................................................................................................................................. p.12 491 Pulleys and timing belts .......................................................................................................... p.12 39 Timing pulleys and belts ........................................................................................................ p.40 83 Chains and sprockets . .............................................................................................................. p.84 99 Chain and belt tensioners . ................................................................................................ p.100 113 Bevel gear . .................................................................................................................................... p.114 135 Worms and wheels ................................................................................................................. p.136 159 Miscellaneaous gears ............................................................................................................ p.160 181 Racks . ............................................................................................................................................... p.182 199 Spur gears .................................................................................................................................... p.200 301 Parallel axis helical gears .................................................................................................. p.302 314 Crossed axis helical gears . ............................................................................................... p.315 353 Precision bevel gears .......................................................................................................... p.354 357 Precision worms and wheels . ....................................................................................... p.358 383 Precision racks ......................................................................................................................... p.384 387 Precision spur gears . ........................................................................................................... p.388 437 Ground spur gears . ............................................................................................................... p.438 457 Precision helical gears ......................................................................................................... p.458 491 General terms and conditions of sale ....................................................................................... p.492 495 Name index ................................................................................................................................................... p.496 501 Part number index . .................................................................................................................................. p.502 510 Customer account n°: Sales contact: Internet password : ..................................... +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 5 Services available from EASY ORDERING • Personalised advice from our technical and sales teams is available by telephone from Monday to Friday from 08.00 to 12.20 and 13.40 to 18.00, just call +33 (0) 4 37 496 496 • We can also be contacted by fax, email or post. PERSONALISED SOLUTIONS • 7000 standard parts available from stock • Custom parts can be machined to order from samples or drawings • Items not listed in catalogue can also be supplied • Medium and large production runs available on request ONLINE ORDERING AVAILABLE 24/24 • www.hpceurope.com references 29,000 parts • Instant online quote generation • Datasheets in PDF format and 3D models can be downloaded free of charge from the site 6 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 SAFE PAYMENT Credit Cheque Bank Card Transfer Our bank details : BNP PARIBAS 18 Chemin de Gargantua 69570 Dardilly de compte : 00010041122 Bank draft FAST DELIVERY • Any order for articles in stock received before 15.00 will be delivered before 18.00 the following day* • Free delivery for all orders over 50€* GENERAL INFORMATION Engrenages HPC SARL, share capital 76 224E Company registration N°382 911 907 RCS Lyon French SIC code : APE 4669B VAT FR 41 382 911 907 58, Chemin de la Bruyère 69570 Dardilly Lyon France Email : cial2@hpceurope.com Website : www.hpceurope.com Tel +33(0)4 37 496 496 Fax +33(0)4 37 490 055 *Some restrictions apply. For deliveries to French mainland only. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 7 Ordering from A guide FIND YOUR PRODUCT Picture index on p.1 RCX TAC LWL PTA Part index on p.496 A C D B Alphabetical index on p.502 SAVING TIME Prepare the following information will speed up the ordering process : Your HPC account number (if you have one) Your name and that of your company Delivery and invoice addresses Your official order number The number of any quotation received Part numbers and quantities required Required delivery date If ordering from outside France, we will need your VAT 8 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Technical support ces For all your questions and requests for quotation To ler an ) ul d a ( orm F Advi = mz ce www.hpceurope.com - +33(0)4 37 496 496 Your parts made to measure Bore, keyway, standard modification... Machined to drawings or from samples... Send us your requests to cial2@hpceurope.com +33(0)4 37 496 496 - www.hpceurope.com Index icons Internal bore Angles Modifiable Non-modifiable Load Axial load Radial load Heavy duty Max load 1 tonne Delivery time 1T In hours or weeks Method of fabrication Moulded Machined Compatibility Robotic industry Food industry Maintenance Maintenance free No lubrication Applicable Industrial Manual Standards Material Steel Stainless steel Aluminium Brass Bronze Nylon Copper Plastic Delrin Peek DIN ISO Origin Japan Switzerland Quality from 1 to 8 Others Cast iron Bi-directional Precision Low temperatures High temperatures Duo Bearings Corrosion Shock Light No fixing Miniature size Low cost range High speed of rotation Resistant to Special HPC Custom-made In stock Modulable In imperial Easy assembly +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 11 nd ts a ey bel l l Pu ing p.39 tim p.14- Detachable V belts HTD type tooth bar stock UNTIL p.14 -30% p.18 Timing belts p.20 Heavy duty timing belt p.29 Connecting plate p.38 Detachable V belts Available to suit SPA, STL SPB and SPZ pulleys - S  P compatible SuperTLink belts offer the same performance as original SP belts but with a many additional benefits. - A  longer lasting V shaped belt. SuperTLink detachable V belts are made from a polyester/polyurethane composite. This combination ensures a longer belt life even in the harshest conditions up to 20 times longer in some applications. High resistance to extreme temperatures (-40° to +100°C) High resistance to abrasive materials High resistance to water, steam, oil and most chemicals - Q  uick and easy mounting The link style construction means that belts can be fitted easily and quickly even on difficult to access drives. Belts can be joined around the shafts without dismantling the drive. - C  an be assembled to any length, reduces the number of belts in stock. With SuperTLink detachable V belts, there is no need to hold stocks of every belt length. Make to length on site simply by adding or removing links. - M  inimal maintenance “Fit and Forget” High quality materials ensure that the belt displays minimal stretch even over long periods. Almost no re-tensioning required. - R  educed belt vibration and noise The link design means that these belts can reduce transmitted vibration and belt noise by up to 50%. DISCOUNTS Typical applications Type of section Part number STL-SPZ SPZ STL-SPA SPA STL-SPB SPB Depending on avaibility - Dimensions in mm 14 4 Volume  4 2013 HPC Length (mm) 1000 1000 1000 20+ Qty. 1+ 5+ 10+ 15+ Disc. List. -5% -10% -15% On request Stock* 4 4 4 Price each 1 to 4 90,62 F 90,62 F 100,35 F www.hpceurope.com - +33(0)4 37 496 496 Detachable V belts For V shaped pulleys PTP PowerTwist Plus V belts are designed to excel in applications where conventional belts will not work or are difficult to install. PowerTwist Plus offers many advantages. - Quick and easy installation. Downtime is no longer measured in hours but in minutes. PowerTwist Plus is hand assembled on site to the length required. Equipment does not have to be stripped down and no special tools or welding is required. - Long operating life PowerTwist Plus is capable of high performance even in the most difficult conditions. The belts resists high temperatures (greater than 100°C), abrasion and exposure to oil, grease, water, steam and solvents/chemicals. - Reduced maintenance. No re-tensioning or lubrication is required. - Reduced noise. The design of PowerTwist Plus means that noise is reduced by up to 50% - Greater lengths available PowerTwist Plus can be assembled to the length required and allows greater spacing between pulleys - Reduced stock With PowerTwist Plus there is no longer need to hold stocks of every belt length. - No marking/scuffing PowerTwist Plus will ever leave any marks on the product being transported Typical applications Type of Part number section PTP-Z/10 Z/10 PTP-A/13 A/13 PTP-B/17 B/17 Depending on avaibility - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com DISCOUNTS 20+ Qty. 1+ 5+ 10+ 15+ Disc. List. -5% -10% -15% On request Length Price each Stock* (mm) 1 to 4 2000 4 98,07 F 2000 4 99,91 F 2000 4 116,01 F HPC Volume 4 2013 4 15 Detachable V belts Installation instructions STL PTP .I - How to measure the length. 1 - P  ull the belt tight around the pulleys to check hand tight length, overlapping the last two holes on the end with the corresponding studs in the opposite end to determine the initial length. (See Fig. 1.) 2 - Count the total number of links and remove the appropriate number of links to obtain the necessary pre-tension. For Z, A and B sections remove 1 in 11 links, for C sections remove 1 in 13, for SPZ, SPA and SPB sections remove 1 in 15 and for SPC remove 1 in 17. On multi-belt drives ensure that each belt has the same number of links. 1 .II - Dismantling. 1 - T  o unfasten, turn 2 adjacent stud heads 90°(See Fig 2). 2 - Insert tool and twist (See Fig. 3). 2 3 16 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 STL PTP .III - Installation. 1 - T  he belt will run equally well in either direction. For multiple belt drives install all belts to run in the same direction. 2 -  Join the two ends of the belt, around the pulley shafts if necessary, by inserting the stud heads of the last links into the corresponding holes and turning the heads 90°. 3 - F  it belt into nearest groove of the smallest pulley and roll belt onto the larger pulley by hand turning the drive slowly. Fig. 4. The belt may seem very tight, this is normal. DO NOT DISTURB THE MOTOR. 4 - F  or close ratio drives additional links may need to be added to ease installation. (NOTE: This does not apply if using the Alternative Installation Method.) 4 .IV - Alternative Installation Method. 1 2 3 4 5 - - - - - S  et motor to mid-position of adjustment range and mark the base clearly. Determine required belt length as in I. Push motor forward to minimum centre distance. Install belts as in III. Pull motor back to previously marked mid-position. .V - Re-tensioning. Like all high performance V belts, SuperTLink require the correct drive tension to be maintained to operate efficiently. Experience indicates that drive tension should be checked after 20 30 minutes running at full load. Re-tensioning may be necessary after 24 hours depending on the how hard the drive has been driven. Any initial belt stretch should then be taken up. Subsequently, belt tension should be checked periodically and adjusted as and when necessary. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 17 HTD type tooth bar stock Aluminium HTD5M-BAR - B  ar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodising - Finish : Supplied not anodised -30%** .Info.. Ø D - W  e are unable to modify this product L D DISCOUNTS L T Part number 12HTD5M-BAR 13HTD5M-BAR 14HTD5M-BAR 15HTD5M-BAR 16HTD5M-BAR 17HTD5M-BAR 18HTD5M-BAR 19HTD5M-BAR 20HTD5M-BAR 21HTD5M-BAR 22HTD5M-BAR 23HTD5M-BAR 24HTD5M-BAR 25HTD5M-BAR 26HTD5M-BAR 27HTD5M-BAR 28HTD5M-BAR 30HTD5M-BAR 32HTD5M-BAR 34HTD5M-BAR 36HTD5M-BAR 38HTD5M-BAR 40HTD5M-BAR 42HTD5M-BAR 44HTD5M-BAR 45HTD5M-BAR 48HTD5M-BAR 50HTD5M-BAR 60HTD5M-BAR 72HTD5M-BAR Dimensions in mm 18 4 Z Teeth 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 34 36 38 40 42 44 45 48 50 60 72 Volume  4 2013 ØD External 17,96 19,55 21,14 22,73 24,33 25,92 27,51 29,10 30,69 32,28 33,88 35,47 37,06 38,65 40,24 41,83 43,42 46,61 49,79 52,97 56,16 59,34 62,52 65,71 68,89 70,48 75,26 78,44 94,36 113,45 HPC Length of teeth L D 150 150 175 175 175 175 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request Price each Total length 1 to 5 L T 160 8,52 F 160 9,31 F 200 11,85 F 200 13,02 F 200 14,16 F 200 14,23 F 200 16,92 F 200 18,49 F 200 19,95 F 200 20,80 F 200 21,66 F 200 23,30 F 200 25,02 F 200 26,84 F 200 29,63 F 200 29,77 F 200 32,84 F 200 35,08 F 200 37,44 F 200 41,12 F 200 47,36 F 200 50,29 F 200 54,65 F 200 59,14 F 200 70,04 F 200 71,32 F 200 78,46 F 200 87,46 F 200 118,62 F 200 167,10 F www.hpceurope.com - +33(0)4 37 496 496 HTD type tooth bar stock Steel HTD8M-BAR - Bar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Steel C40 .Info.. - We are unable to modify this product -30%** Ø D L D L T DISCOUNTS Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request Part number 18HTD8M-BAR 19HTD8M-BAR 20HTD8M-BAR 21HTD8M-BAR 22HTD8M-BAR 23HTD8M-BAR 24HTD8M-BAR 25HTD8M-BAR 26HTD8M-BAR 28HTD8M-BAR 30HTD8M-BAR 32HTD8M-BAR 34HTD8M-BAR 35HTD8M-BAR 36HTD8M-BAR 38HTD8M-BAR 40HTD8M-BAR 44HTD8M-BAR 48HTD8M-BAR Dimensions in mm Z Teeth 18 19 20 21 22 23 24 25 26 28 30 32 34 35 36 38 40 44 48 ØD External 44,47 47,01 49,56 52,11 54,65 57,20 59,75 62,29 64,84 69,93 75,03 80,12 85,21 87,76 90,30 95,40 100,49 110,67 120,86 +33(0)4 37 490 055 - cial2@hpceurope.com Length of teeth L D 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 HPC Total length L T 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Price each 1 to 5 40,51 F 43,29 F 45,65 F 47,51 F 49,83 F 52,15 F 54,47 F 55,86 F 60,54 F 66,61 F 75,89 F 88,10 F 95,92 F 106,27 F 111,45 F 124,45 F 136,33 F 161,75 F 189,24 F Volume 4 2013 4 19 Heavy duty timing pulley Aluminium PITCH 3mm Belt width 9mm - For use with RPP3 belt - Pitch: 3mm - Material: aluminium Belt 9mm .Accessories. - Belts RPP3 - Belt idler roller RE F .Info.. - P  re-bore dimension is a guide only -To be finished to size customer - We are unable to modify these parts. ØE L ØD ed Suppli ed r o b - e pr ØA ØM DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request No. of Part number teeth 10HTD3M-09F 10 12HTD3M-09F 12 14HTD3M-09F 14 15HTD3M-09F 15 16HTD3M-09F 16 18HTD3M-09F 18 20HTD3M-09F 20 21HTD3M-09F 21 22HTD3M-09F 22 24HTD3M-09F 24 26HTD3M-09F 26 28HTD3M-09F 28 30HTD3M-09F 30 32HTD3M-09F 32 36HTD3M-09F 36 40HTD3M-09F 40 44HTD3M-09F 44 48HTD3M-09 48 60HTD3M-09 60 72HTD3M-09 72 PCD Ø 9,55 11,46 13,37 14,32 15,28 17,19 19,10 20,05 21,01 22,92 24,83 26,74 28,65 30,56 34,38 38,20 42,02 45,84 57,30 68,75 External Flange ØD ØE 8,79 13,0 10,70 15,0 12,61 16,0 13,56 17,5 14,52 17,5 16,43 20,0 18,34 23,0 19,29 25,0 20,25 25,0 22,16 25,0 24,07 28,0 25,98 32,0 27,89 32,0 29,80 36,0 33,62 39,0 37,44 42,0 41,26 48,0 45,08 - 56,54 - 67,99 - *Depending on availability - Dimensions in mm 20 4 Volume  4 2013 HPC ØM 13,0 15,0 16,0 17,5 10,0 11,0 13,0 14,0 14,0 14,0 16,0 18,0 20,0 22,0 26,0 28,0 33,0 33,0 33,0 33,0 F 10,2 10,2 10,2 10,2 12,8 12,8 12,8 12,8 12,8 12,8 12,8 12,8 12,8 12,8 13,4 13,4 13,4 13,4 13,4 13,4 L 17,5 17,5 17,5 17,5 20,6 20,6 20,6 20,6 20,6 20,6 20,6 20,6 20,6 20,6 22,2 22,2 22,2 22,2 22,2 22,2 Prebore Price each Stock* 1 to 5 ØA Solid 4 5,46 F Solid 4 5,46 F Solid 4 5,56 F Solid 4 5,56 F 4 4 5,95 F 6 4 6,05 F 6 4 6,10 F 6 4 6,28 F 6 4 6,49 F 6 4 6,90 F 6 4 7,03 F 6 4 7,14 F 6 4 7,30 F 6 4 7,76 F 6 4 8,25 F 6 4 9,08 F 6 4 10,47 F 8 4 11,34 F 8 4 12,70 F 8 4 14,57 F www.hpceurope.com - +33(0)4 37 496 496 Heavy duty timing pulley Steel or aluminium PITCH 5mm Belt width 9mm - For use with RPP5 belt - Pitch: 5mm - Material: aluminium or phosphated steel depending on size .Accessories. - Belts RPP5 - Belt idler roller RE F ed Suppli ed pre-bor Belt 9mm L .Info.. - Pre-bore dimension is a guide only - To be finished to size by customer - We are unable ØE to modify these parts. ØD ØDi ØA ØM DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request ØDi - - - - - - - - - - - - - - - 54 61 80 100 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Aluminium Steel No. of PCD Ø ØD ØM Part number Material teeth external flange ØE 12HTD5M-09F 12 19,10 17,96 23,0 13,0 14HTD5M-09F 14 22,28 21,14 25,0 13,0 15HTD5M-09F 15 23,87 22,73 28,0 16,0 16HTD5M-09F 16 25,46 24,32 28,0 16,5 18HTD5M-09F 18 28,65 27,51 32,0 20,0 20HTD5M-09F 20 31,83 30,69 36,0 23,0 21HTD5M-09F 21 33,42 32,28 38,0 24,0 22HTD5M-09F 22 35,01 33,87 39,0 25,5 24HTD5M-09F 24 38,20 37,06 42,0 27,0 26HTD5M-09F 26 41,38 40,24 44,0 30,0 28HTD5M-09F 28 44,56 43,42 48,0 30,5 30HTD5M-09F 30 47,75 46,60 51,0 35,0 32HTD5M-09F 32 50,93 49,79 54,0 38,0 36HTD5M-09F 36 57,30 56,16 60,0 38,0 40HTD5M-09F 40 63,66 62,52 71,0 38,0 44 70,03 68,89 - 38,0 44HTD5M-09 48 76,39 75,25 - 45,0 48HTD5M-09 60 95,49 94,35 - 45,0 60HTD5M-09 72 114,59 113,45 - 45,0 72HTD5M-09 *Depending on availability - Dimensions in mm F 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 L 20,0 20,0 20,0 20,0 20,0 22,5 22,5 22,5 22,5 22,5 22,5 22,5 22,5 22,5 22,5 25,5 25,5 25,5 25,5 Pre-bore Price each ØA Stock* 1 to 5 4 4 4,91 F 6 4 5,31 F 6 4 5,56 F 6 4 5,89 F 6 4 6,49 F 6 4 6,90 F 6 4 7,14 F 6 4 7,43 F 6 4 7,89 F 6 4 8,25 F 6 4 8,60 F 6 4 8,94 F 8 4 10,08 F 8 4 10,52 F 8 4 10,91 F 8 - 16,72 F 8 4 18,45 F 8 4 27,01 F 8 4 38,20 F Volume 4 2013 4 21 Heavy duty timing pulley Steel or aluminium PITCH 5mm Belt width 15mm - For use with RPP5 belt - Pitch: 5mm - Material: Aluminium or phosphated steel depending on size F Belt 15mm L ed Suppli ed r o b - e r p .Accessories. - Belts RPP5 - Belt idler roller RE .Info.. ØE - P  re-bore dimension is a guide only - To be finished to size customer - We are unable to modify these parts. Aluminium Steel Part number Material 12HTD5M-15F 14HTD5M-15F 15HTD5M-15F 16HTD5M-15F 18HTD5M-15F 20HTD5M-15F 21HTD5M-15F 22HTD5M-15F 24HTD5M-15F 26HTD5M-15F 28HTD5M-15F 30HTD5M-15F 32HTD5M-15F 36HTD5M-15F 40HTD5M-15F 44HTD5M-15 48HTD5M-15 60HTD5M-15 72HTD5M-15 DISCOUNTS No. of PCD Ø ØD teeth external flange 12 19,10 14 22,28 15 23,87 16 25,46 18 28,65 20 31,83 21 33,42 22 35,01 24 38,20 26 41,38 28 44,56 30 47,75 32 50,93 36 57,30 40 63,66 44 70,03 48 76,39 60 95,49 72 114,59 ØDi ØA ØM ØD 17,96 21,14 22,73 24,32 27,51 30,69 32,28 33,87 37,06 40,24 43,42 46,60 49,79 56,16 62,52 68,89 75,25 94,35 113,45 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request ØE 23,0 25,0 28,0 28,0 32,0 36,0 38,0 39,0 42,0 44,0 48,0 51,0 54,0 60,0 71,0 - - - - *Depending on availability - Dimensions in mm 22 4 Volume  4 2013 HPC ØM 13,0 13,0 16,0 16,5 20,0 23,0 24,0 25,5 27,0 30,0 30,5 35,0 38,0 38,0 38,0 38,0 38,0 50,0 50,0 ØDi - - - - - - - - - - - - - - - 054 061 080 100 F 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 20,5 Pre-bore Price each Stock* 1 to 5 26,0 Solid 4 5,75 F 26,0 6 4 6,10 F 26,0 6 4 6,49 F 26,0 6 4 6,59 F 26,0 6 4 7,14 F 26,0 6 4 7,56 F 26,0 6 - 7,89 F 26,0 6 4 8,25 F 28,0 6 4 8,87 F 28,0 6 4 9,36 F 28,0 6 4 10,08 F 28,0 6 4 10,91 F 28,0 8 4 11,44 F 28,0 8 4 12,09 F 28,0 8 4 13,02 F 30,0 8 4 19,56 F 30,0 8 4 21,59 F 30,0 8 4 32,01 F 30,0 8 4 43,41 F L ØA www.hpceurope.com - +33(0)4 37 496 496 Heavy duty timing pulley Steel or aluminium PITCH 5mm Belt width 25mm ed Suppli ed r o b - pre - For use with RPP5 belt - Pitch: 5mm - Material: Aluminium or phosphated steel depending on size .Accessories. - Belts RPP5 - Belt idler roller RE F Belt 25mm L .Info.. - Pre-bore dimension is a guide only - To be finished to size by customer - We are unable ØE to modify these parts. ØD ØDi ØA ØM DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Aluminium Steel No. of PCD Ø flange Part number Material teeth external ØD ØE ØM ØDi 12HTD5M-25F 12 19,10 17,96 23,0 13,0 - 14HTD5M-25F 14 22,28 21,14 25,0 13,0 - 15HTD5M-25F 15 23,87 22,73 28,0 16,0 - 16HTD5M-25F 16 25,46 24,32 28,0 16,5 - 18HTD5M-25F 18 28,65 27,51 32,0 20,0 - 20HTD5M-25F 20 31,83 30,69 36,0 23,0 - 21HTD5M-25F 21 33,42 32,28 38,0 24,0 - 22HTD5M-25F 22 35,01 33,87 39,0 25,5 - 24HTD5M-25F 24 38,20 37,06 42,0 27,0 - 26HTD5M-25F 26 41,38 40,24 44,0 30,0 - 28HTD5M-25F 28 44,56 43,42 48,0 30,5 - 30HTD5M-25F 30 47,75 46,60 51,0 35,0 - 32HTD5M-25F 32 50,93 49,79 54,0 38,0 - 36HTD5M-25F 36 57,30 56,16 60,0 38,0 - 40HTD5M-25F 40 63,66 62,52 71,0 38,0 - 44HTD5M-25 44 70,03 68,89 - 38,0 - 48HTD5M-25 48 76,39 75,25 - 38,0 061 60HTD5M-25 60 95,49 94,35 - 50,0 080 72HTD5M-25 72 114,59 113,45 - 50,0 100 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Pre-bore ØA - 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 Price each 1 to 5 7,03 F 7,56 F 7,89 F 8,25 F 8,60 F 9,36 F 9,65 F 10,31 F 11,34 F 11,98 F 12,95 F 14,07 F 14,93 F 15,65 F 17,98 F 25,09 F 29,16 F 39,71 F 55,74 F Volume 4 2013 4 23 F 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 30,5 L 36 36 36 36 36 36 38 38 38 38 38 38 38 38 38 40 40 40 40 Heavy duty timing pulley Steel or cast iron PITCH 8mm Belt width 20mm - For use with RPP8 belt - Pitch: 8mm - Material: Cast iron or phosphated steel depending on size F L Belt 20mm ed Suppli ed r o b - e pr .Accessories. - B  elts RPP8 - Belt idler roller RE .Info.. ØE - P  re-bore dimension is a guide only - To be finished to size by customer - We are unable to modify these parts. ØDi ØA ØM ØD DISCOUNTS Cast Steel No. of PCD external flange Ø ØD ØE Part number Material teeth 22HTD8M-20F 22 56,02 54,65 60,0 24HTD8M-20F 24 61,12 59,75 66,0 26HTD8M-20F 26 66,21 64,85 70,0 28HTD8M-20F 28 71,30 70,08 75,0 30HTD8M-20F 30 76,39 75,13 82,5 32HTD8M-20F 32 81,49 80,16 87,0 34HTD8M-20F 34 86,58 85,22 91,0 36HTD8M-20F 36 91,67 90,30 97,0 38HTD8M-20F 38 96,77 95,39 102,0 40HTD8M-20F 40 101,86 100,49 106,0 44HTD8M-20F 44 112,05 110,67 120,0 48HTD8M-20F 48 122,23 120,86 128,0 56HTD8M-20F 56 142,60 141,23 150,0 64HTD8M-20F 64 162,97 161,60 168,0 72HTD8M-20F 72 183,35 181,97 192,0 80HTD8M-20 80 203,72 202,35 - 90HTD8M-20 90 229,18 227,81 - *Depending on availability - Dimensions in mm 24 4 Volume  4 2013 HPC Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request ØM 43 45 48 50 55 60 66 70 75 75 75 75 80 80 80 90 90 ØDi - - - - - - - - - - - - 116 137 158 180 204 F 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 L 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 Pre-bore Price each ØA Stock* 1 to 5 12 4 11,19 F 12 4 12,42 F 12 4 13,26 F 15 4 14,70 F 15 4 16,86 F 15 4 18,61 F 15 4 20,70 F 15 4 22,86 F 15 - 25,09 F 15 - 27,08 F 15 4 32,26 F 15 4 37,20 F 15 4 47,56 F 15 4 58,41 F 15 4 70,20 F 15 - 66,79 F 15 - 76,05 F www.hpceurope.com - +33(0)4 37 496 496 Heavy duty timing pulley Steel or cast iron PITCH 8mm Belt width 30mm - For use with RPP8 belt - Pitch: 8mm - Material: Cast iron or phosphated steel depending on size ed Suppli ed pre-bor .Accessories. - B  elts RPP8 - Belt idler roller RE F .Info.. Belt 30mm L - P  re-bore dimension is a guide only - To be finished to size by customer - We are unable to modify these parts. ØE ØDi ØA ØM ØD DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Cast Steel No. of PCD Part number Material teeth Ø 22HTD8M-30F 22 56,02 24HTD8M-30F 24 61,12 26HTD8M-30F 26 66,21 28HTD8M-30F 28 71,30 30HTD8M-30F 30 76,39 32HTD8M-30F 32 81,49 34HTD8M-30F 34 86,58 36HTD8M-30F 36 91,67 38HTD8M-30F 38 96,77 40HTD8M-30F 40 101,86 44HTD8M-30F 44 112,05 48HTD8M-30F 48 122,23 56HTD8M-30F 56 142,60 64HTD8M-30F 64 162,97 72HTD8M-30F 72 183,35 80HTD8M-30 80 203,72 90HTD8M-30 90 229,18 external ØD 54,65 59,75 64,85 70,08 75,13 80,16 85,22 90,30 95,39 100,49 110,67 120,86 141,23 161,60 181,97 202,35 227,81 flange ØE ØM 60,0 43 66,0 45 70,0 48 75,0 50 82,5 55 87,0 60 91,0 66 97,0 70 102,0 75 106,0 75 120,0 75 128,0 75 150,0 90 168,0 90 192,0 95 - 100 - 100 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com ØDi - - - - - - - - - - - - 116 137 158 180 204 F 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 HPC L 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 Pre-bore ØA 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Stock* 4 4 4 - 4 - - 4 - 4 - 4 4 - - - - Volume 4 2013 Price each 1 to 5 12,52 F 14,32 F 16,21 F 17,98 F 20,63 F 22,86 F 25,31 F 27,95 F 30,74 F 33,30 F 39,67 F 45,88 F 63,89 F 78,95 F 92,69 F 82,70 F 90,13 F 4 25 Heavy duty timing pulley Steel or cast iron PITCH 8mm Belt width 50mm ed Suppli ed r o b - pre Belt 50mm - F  or use with RPP8 belt - Pitch: 8mm - Material: Cast iron or phosphated steel depending on size F .Accessories. L F - B  elts RPP8 - Belt idler roller RE ØDi ØDi .Info.. - P  re-bore dimension is ØE ØD a guide only - To be finished to size by customer - We are unable to modify these parts. ØA ØM up to 48 teeth ØM ØA ØE ØD DISCOUNTS more than 56 teeth Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Cast Steel Part number Material 22HTD8M-50F 24HTD8M-50F 26HTD8M-50F 28HTD8M-50F 30HTD8M-50F 32HTD8M-50F 34HTD8M-50F 36HTD8M-50F 38HTD8M-50F 40HTD8M-50F 44HTD8M-50F 48HTD8M-50F 56HTD8M-50F 64HTD8M-50F 72HTD8M-50F 80HTD8M-50 90HTD8M-50 Dimensions in mm 26 4 No. of teeth 22 24 26 28 30 32 34 36 38 40 44 48 56 64 72 80 90 PCD Ø ØD external flange 56,02 54,65 61,12 59,75 66,21 64,85 71,30 70,08 76,39 75,13 81,49 80,16 86,58 85,22 91,67 90,30 96,77 95,39 101,86 100,49 112,05 110,67 122,23 120,86 142,60 141,23 162,97 161,60 183,35 181,97 203,72 202,35 229,18 227,81 Volume  4 2013 HPC ØE 60,0 66,0 70,0 75,0 82,5 87,0 91,0 97,0 102,0 106,0 120,0 128,0 150,0 168,0 192,0 - - ØM 43 45 48 50 55 60 66 70 75 75 75 80 90 100 100 110 110 ØDi - - - - - - - - - - - - 116 137 158 180 204 F 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 L 70 70 70 70 70 70 70 70 70 70 70 70 60 60 60 60 60 Pre-bore Price each ØA - - - - - - - - - - - 18 18 18 18 18 1 to 5 17,11 F 19,73 F 22,35 F 25,22 F 28,80 F 31,92 F 35,52 F 39,17 F 43,02 F 46,75 F 55,68 F 65,00 F 79,93 F 100,49 F 123,61 F 111,78 F 125,27 F www.hpceurope.com - +33(0)4 37 496 496 Heavy duty timing pulley Heavy duty timing pulley PITCH 14mm Steel or cast iron - F  or use with RPP14 belt - Pitch: 14mm - Material: Cast iron or phosphated steel depending on size Belt width 55mm ed Suppli ed pre-bor .Accessories. - B  elts RPP14 - Belt idler roller RE Belt 55mm .Info.. - Pre-bore dimension is a guide only - To be finished to size by customer - We are unable to modify these parts. F L F ØDi ØE ØA ØD up to 44 teeth ØM ØA ØE ØD ØM DISCOUNTS more than 48 teeth Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Cast Steel Part number Material 28HTD14M-55F 29HTD14M-55F 30HTD14M-55F 32HTD14M-55F 34HTD14M-55F 36HTD14M-55F 38HTD14M-55F 40HTD14M-55F 44HTD14M-55F 48HTD14M-55F 56HTD14M-55F 64HTD14M-55F Dimensions in mm No. of PCD Ø flange teeth external ØD ØE 28 124,78 122,12 29 129,23 126,57 30 133,69 130,99 32 142,60 139,88 34 151,52 148,79 36 160,43 157,68 38 169,34 166,60 40 178,25 175,49 44 196,08 193,28 48 213,90 211,11 56 249,55 246,76 64 285,21 282,41 ØM 128 138 138 154 160 168 183 188 211 226 256 296 +33(0)4 37 490 055 - cial2@hpceurope.com ØDi 100 100 100 100 100 100 120 120 120 135 135 135 HPC Pre-bore ØA 24 24 24 24 24 24 24 24 24 24 28 28 Price each 1 to 5 76,73 F 102,31 F 95,23 F 107,77 F 122,01 F 136,43 F 143,38 F 160,68 F 195,51 F 182,02 F 227,10 F 231,55 F Volume 4 2013 4 27 - - - - - - - - - 170 207 240 F 70 70 70 70 70 70 70 70 70 70 70 70 L 85 85 85 85 85 85 85 85 85 70 70 70 Heavy duty timing pulley Steel or cast iron PITCH 14mm Belt width 85mm Belt 85mm - For use with RPP14 belt - Pitch: 14mm - Material: Cast iron or phosphated steel depending on size .Accessories. F - B  elts RPP14 - B  elt idler roller RE ed Suppli ed pre-bor L F .Info.. - P  re-bore dimension is a guide only - To be finished to size by ØE customer - We are unable to modify these parts. ØDi ØA ØD ØM ØA ØE ØD ØM up to 48 teeth more than 56 teeth DISCOUNTS Cast Steel Part number Material 28HTD14M-85F 30HTD14M-85F 32HTD14M-85F 34HTD14M-85F 36HTD14M-85F 38HTD14M-85F 40HTD14M-85F 44HTD14M-85F 48HTD14M-85F 56HTD14M-85F 64HTD14M-85F Dimensions in mm 28 4 No. of teeth 28 30 32 34 36 38 40 44 48 56 64 PCD Ø external 124,78 133,69 142,60 151,52 160,43 169,34 178,25 196,08 213,90 249,55 285,21 Volume  4 2013 ØD flange 122,12 130,99 139,88 148,79 157,68 166,60 175,49 193,28 211,11 246,76 282,41 HPC Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request ØE 128 138 154 160 168 183 188 211 226 256 296 ØM ØDi 100 - 100 - 100 - 100 - 100 - 120 - 135 - 135 - 150 - 150 207 150 240 F 102 102 102 102 102 102 102 102 102 102 102 L 117 117 117 117 117 117 117 117 117 102 102 Pre-bore Price each ØA - - - - - - - - - 32 32 1 to 5 103,60 F 128,06 F 145,14 F 164,27 F 185,13 F 193,60 F 217,34 F 264,77 F 255,59 F 314,71 F 324,27 F www.hpceurope.com - +33(0)4 37 496 496 RPP-heavy duty timing belt Chloroprene rubber belt Pitch with glass fibre tension members - To be used with HTD3M-09F pulley - Pitch 3mm - Output up to 98% - Materials: chloroprene rubber reinforced with glass fibres nylon protective film RPP3 .Advantages. - Shock-resistant - The RPP parabolic tooth profile gives a higher torque capability and greater resistance to tooth jump 3 2,40 1,15 .Accessories. - Pulleys HTD3M-09F - Belt idler rollers RE discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Part number RPP3/90 RPP3/105 RPP3/129 RPP3/141 RPP3/144 RPP3/147 RPP3/150 RPP3/159 RPP3/168 RPP3/174 RPP3/177 RPP3/180 RPP3/186 RPP3/195 RPP3/201 RPP3/204 RPP3/210 RPP3/213 RPP3/225 RPP3/231 RPP3/240 RPP3/243 RPP3/246 RPP3/249 RPP3/252 Length 90 105 129 141 144 147 150 159 168 174 177 180 186 195 201 204 210 213 225 231 240 243 246 249 252 No. of teeth 30 35 43 47 48 49 50 53 56 58 59 60 62 65 67 68 70 71 75 77 80 81 82 83 84 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Stock* 4 4 4 - 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Price each 1 to 5 for 9mm width 5,33 F 5,51 F 5,69 F 5,87 F 5,87 F 5,87 F 5,87 F 5,87 F 5,87 F 6,04 F 6,04 F 6,04 F 6,04 F 6,04 F 6,20 F 6,20 F 6,20 F 6,20 F 6,20 F 6,20 F 6,40 F 6,40 F 6,40 F 6,40 F 6,40 F Volume 4 2013 4 29 Part number RPP/255 RPP3/261 RPP3/264 RPP3/267 RPP3/270 RPP3/276 RPP3/285 RPP3/288 RPP3/291 RPP3/297 RPP3/300 RPP3/312 RPP3/318 RPP3/327 RPP3/330 RPP3/333 RPP3/336 RPP3/339 RPP3/345 RPP3/357 RPP3/363 RPP3/375 RPP3/384 RPP3/390 RPP3/393 RPP3/405 RPP3/420 RPP3/432 RPP3/447 RPP3/474 RPP3/480 RPP3/486 RPP3/489 RPP3/501 RPP3/510 RPP3/513 RPP3/522 RPP3/531 RPP3/537 RPP3/564 RPP3/570 RPP3/576 RPP3/579 RPP3/597 RPP3/600 RPP3/633 RPP3/648 RPP3/669 Length 255 261 264 267 270 276 285 288 291 297 300 312 318 327 330 333 336 339 345 357 363 375 384 390 393 405 420 432 447 474 480 486 489 501 510 513 522 531 537 564 570 576 579 597 600 633 648 669 No. of teeth 85 87 88 89 90 92 95 96 97 99 100 104 106 109 110 111 112 113 115 119 121 125 128 130 131 135 140 144 149 158 160 162 163 167 170 171 174 177 179 188 190 192 193 199 200 211 216 223 *Depending on availability - Dimensions in mm 30 4 Volume  4 2013 HPC Stock* 4 4 4 - 4 4 4 4 4 4 4 4 4 - 4 4 - 4 4 4 - - 4 - 4 4 4 4 4 4 - - - - - - 4 - - - 4 - - 4 4 4 - 4 Price each 1 to 5 for 9mm width 6,40 F 6,40 F 6,40 F 6,40 F 6,40 F 6,40 F 6,40 F 6,55 F 6,55 F 6,55 F 6,55 F 6,88 F 6,88 F 6,88 F 6,88 F 6,88 F 6,88 F 6,88 F 6,88 F 6,88 F 7,05 F 7,05 F 7,05 F 7,29 F 7,29 F 7,29 F 7,29 F 7,42 F 7,42 F 7,60 F 7,60 F 7,78 F 7,78 F 7,78 F 7,78 F 7,78 F 7,92 F 7,92 F 7,92 F 8,14 F 8,27 F 8,27 F 8,27 F 8,47 F 8,47 F 8,47 F 8,63 F 8,79 F www.hpceurope.com - +33(0)4 37 496 496 RPP-heavy duty timing belt Chloroprene rubber belt Pitch with glass fibre tension members - - - - To be used with HTD3M-09F pulley Pitch 3mm Output up to 98% Materials: Chloroprene rubber reinforced with glass fibres nylon protective film RPP3 .Advantages. - Shock-resistant - The RPP parabolic tooth profile gives a higher torque capability and greater resistance to tooth jump .Accessories. - Pulleys HTD3M-09F - Belt idler rollers RE 3 2,40 1,15 discounts Part number RPP3/711 RPP3/735 RPP3/738 RPP3/756 RPP3/804 RPP3/882 RPP3/945 RPP3/1062 RPP3/1125 RPP3/1245 RPP3/1263 RPP3/1500 RPP3/1530 RPP3/1863 Dimensions in mm Length 711 735 738 756 804 882 945 1062 1125 1245 1263 1500 1530 1863 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Price each 1 to 5 No. of teeth for 9mm width 237 8,99 F 245 9,32 F 246 9,51 F 252 9,65 F 268 10,01 F 294 10,18 F 315 10,37 F 354 10,56 F 373 10,91 F 415 11,59 F 421 11,59 F 500 13,13 F 510 13,13 F 621 14,55 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 31 RPP-heavy duty timing belt Chloroprene rubber belt Pitch RPP5 with glass fibre tension members - To be used with HTD5M pulley - Pitch 5mm - Output up to 98% - Materials: Chloroprene rubber reinforced with glass fibres nylon protective film .Advantages. 5 - Shock-resistant - The RPP parabolic tooth profile gives a higher torque capability and greater resistance to tooth jump 3,80 2,00 .Accessories. - Pulleys HTD5M-09F - Belt idler rollers RE Part number RPP5/180 RPP5/225 RPP5/235 RPP5/245 RPP5/255 RPP5/265 RPP5/270 RPP5/280 RPP5/285 RPP5/295 RPP5/300 RPP5/305 RPP5/325 RPP5/345 RPP5/350 RPP5/375 RPP5/400 RPP5/420 RPP5/425 RPP5/450 RPP5/455 RPP5/460 RPP5/465 RPP5/475 RPP5/500 discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Length N°. of teeth 180 225 235 245 255 265 270 280 285 295 300 305 325 345 350 375 400 420 425 450 455 460 465 475 500 36 45 47 49 51 53 54 56 57 59 60 61 65 69 70 75 80 84 85 90 91 92 93 95 100 Stock* 9mm 4 4 4 4 4 - 4 4 4 4 4 4 4 4 4 4 4 4 - 4 4 - - - 4 *Depending on availability - Dimensions in mm 32 4 Volume  4 2013 HPC Price each 1 to 5 for a width of 15mm 25mm 15mm 9mm - 4 6,74 F 11,05 F - 4 6,88 F 11,05 F - 6,88 F 11,24 F 16,10 F - 7,05 F 11,24 F 16,10 F 4 7,29 F 11,41 F 16,95 F - 7,29 F 11,41 F 17,45 F - 4 7,29 F 11,59 F 4 7,42 F 11,59 F 17,63 F - 7,42 F 11,59 F 17,63 F 4 7,42 F 11,59 F 17,63 F 4 7,60 F 11,59 F 17,82 F 4 7,60 F 11,74 F 17,82 F - 4 7,60 F 11,95 F 4 7,78 F 12,46 F 18,68 F 4 7,78 F 12,46 F 18,68 F 4 7,92 F 12,82 F 19,18 F 4 8,27 F 12,97 F 19,72 F 4 8,27 F 13,13 F 19,91 F - 8,47 F 13,50 F 20,41 F 4 8,63 F 13,82 F 20,76 F 4 8,63 F 13,82 F 20,76 F - 4 8,63 F 13,82 F 4 8,63 F 14,00 F 20,95 F 4 8,79 F 14,00 F 21,14 F 4 8,99 F 14,55 F 21,63 F Stock* www.hpceurope.com - +33(0)4 37 496 496 Part number RPP5/525 RPP5/535 RPP5/565 RPP5/575 RPP5/580 RPP5/600 RPP5/610 RPP5/615 RPP5/635 RPP5/640 RPP5/670 RPP5/675 RPP5/700 RPP5/705 RPP5/710 RPP5/725 RPP5/740 RPP5/750 RPP5/755 RPP5/800 RPP5/835 RPP5/850 RPP5/890 RPP5/900 RPP5/935 RPP5/940 RPP5/950 RPP5/980 RPP5/1000 RPP5/1025 RPP5/1050 RPP5/1100 RPP5/1125 RPP5/1135 RPP5/1195 RPP5/1200 RPP5/1240 RPP5/1270 RPP5/1420 RPP5/1595 RPP5/1690 RPP5/1790 RPP5/1800 RPP5/1870 RPP5/1895 RPP5/1945 RPP5/2000 RPP5/2250 RPP5/2525 Length 525 535 565 575 580 600 610 615 635 640 670 675 700 705 710 725 740 750 755 800 835 850 890 900 935 940 950 980 1000 1025 1050 1100 1125 1135 1195 1200 1240 1270 1420 1595 1690 1790 1800 1870 1895 1945 2000 2250 2525 N°. of teeth 105 107 113 115 116 120 122 123 127 128 134 135 140 141 142 145 148 150 151 160 167 170 178 180 187 188 190 196 200 205 210 220 225 227 239 240 248 254 284 319 338 358 360 374 379 389 400 450 505 Stock* 9mm - - - 4 - - - - - - 4 - - - - - - - 4 - 4 4 - - - - - - 4 4 - - 4 - 4 - - 4 4 - 4 - - - - - 4 4 4 *Depending on availability - Dimensions in mm Price each 1 to 5 for a width of 15mm 25mm 15mm 9mm 4 9,15 F 14,71 F 21,98 F 4 9,51 F 14,88 F 22,35 F 4 9,51 F 15,23 F 23,22 F 4 9,65 F 15,23 F 23,22 F - 4 9,65 F 15,41 F - 9,86 F 15,73 F 23,72 F 4 10,01 F 15,90 F 24,08 F - - 10,18 F 16,10 F - 10,18 F 16,10 F 24,58 F - 10,37 F 16,59 F 24,77 F - 10,56 F 16,78 F 25,26 F - 10,56 F 16,78 F 25,26 F - 10,91 F 17,31 F 26,14 F - - 10,91 F 17,31 F - 10,91 F 17,45 F 26,14 F - 11,05 F 17,66 F 26,48 F - 11,24 F 17,82 F 26,68 F 4 11,24 F 17,82 F 26,86 F - 11,24 F 17,82 F 26,86 F 4 11,59 F 18,51 F 27,86 F 4 11,74 F 18,87 F 28,40 F 4 12,09 F 19,18 F 28,93 F - 12,46 F 19,72 F 29,80 F - 12,46 F 19,91 F 29,94 F 4 12,82 F 20,26 F 30,50 F - 12,82 F 20,41 F 30,98 F - 12,97 F 20,59 F 31,18 F - 13,13 F 20,95 F 31,52 F - 13,50 F 21,46 F 32,21 F - - 13,82 F 21,63 F - 14,00 F 21,98 F 33,26 F - 14,36 F 22,54 F 34,48 F 4 14,71 F 23,01 F 35,16 F - 14,79 F 23,54 F 35,84 F - - 14,88 F 24,22 F 4 15,23 F 24,58 F 36,72 F 4 37,25 F 15,41 F 24,77 F - 15,73 F 24,77 F 37,77 F 4 16,95 F 27,03 F 40,88 F - 18,51 F 29,44 F 44,51 F 4 19,05 F 30,50 F 45,74 F 4 20,26 F 32,03 F 48,51 F 4 20,41 F 32,21 F 48,51 F - - 20,95 F 33,07 F - 21,26 F 33,61 F 50,60 F - - 21,46 F 33,94 F - 21,98 F 34,97 F 52,83 F 4 24,58 F 38,62 F 62,74 F 4 26,68 F 42,07 F 63,59 F Stock* +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 33 RPP-heavy duty timing belt Chloroprene rubber belt Pitch with glass fibre tension members RPP8 - To be used with HTD8M pulley - Pitch 8mm - Output up to 98% - Materials: Chloroprene rubber reinforced with glass fibres nylon protective film .Advantages. - Shock-resistant - The RPP parabolic tooth profile gives a higher torque capability and greater resistance to tooth jump .Accessories. - Pulleys HTD8 - Belt idler rollers RE discounts Part number RPP8/288 RPP8/320 RPP8/352 RPP8/360 RPP8/384 RPP8/408 RPP8/456 RPP8/480 RPP8/536 RPP8/544 RPP8/560 RPP8/600 RPP8/608 RPP8/632 RPP8/640 RPP8/680 RPP8/720 RPP8/800 RPP8/840 RPP8/880 RPP8/896 RPP8/920 RPP8/960 Dimensions in mm 34 4 Length 288 320 352 360 384 408 456 480 536 544 560 600 608 632 640 680 720 800 840 880 896 920 960 Volume  4 2013 N°. of teeth 36 40 44 45 48 51 57 60 67 68 70 75 76 79 80 85 90 100 105 110 112 115 120 HPC Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Price each 1 to 5 for a width of 20mm 30mm 50mm 9,51 F 14,71 F 24,94 F 10,18 F 15,90 F 26,48 F 10,91 F 16,95 F 28,54 F 11,24 F 17,31 F 29,44 F 11,95 F 18,51 F 31,31 F 12,82 F 19,72 F 33,40 F 14,55 F 22,32 F 37,77 F 15,23 F 23,54 F 39,84 F 16,45 F 25,09 F 42,07 F 17,31 F 26,31 F 45,19 F 17,45 F 26,68 F 46,24 F 18,17 F 27,35 F 46,93 F 18,32 F 27,71 F 47,79 F 18,51 F 27,86 F 48,83 F 19,05 F 28,76 F 50,07 F 19,42 F 29,44 F 52,83 F 20,59 F 31,18 F 56,83 F 21,78 F 33,40 F 58,41 F 22,67 F 34,48 F 59,59 F 23,22 F 35,34 F 59,59 F 23,36 F 35,53 F 60,46 F 24,05 F 36,53 F 62,03 F 24,94 F 37,77 F 64,09 F www.hpceurope.com - +33(0)4 37 496 496 Pitch RPP8 8 5,40 3,20 discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Part number RPP8/1000 RPP8/1040 RPP8/1080 RPP8/1120 RPP8/1200 RPP8/1224 RPP8/1280 RPP8/1352 RPP8/1424 RPP8/1440 RPP8/1464 RPP8/1600 RPP8/1680 RPP8/1760 RPP8/1800 RPP8/2000 RPP8/2200 RPP8/2272 RPP8/2400 RPP8/2520 RPP8/2600 RPP8/2800 RPP8/3048 RPP8/3280 RPP8/3600 RPP8/4400 Dimensions in mm Length 1000 1040 1080 1120 1200 1224 1280 1352 1424 1440 1464 1600 1680 1760 1800 2000 2200 2272 2400 2520 2600 2800 3048 3280 3600 4400 N°. of teeth 125 130 135 140 150 153 160 169 178 180 183 200 210 220 225 250 275 284 300 315 325 350 381 410 450 550 +33(0)4 37 490 055 - cial2@hpceurope.com Price each 1 to 5 for a width of 20mm 30mm 50mm 25,80 F 38,79 F 66,01 F 26,81 F 40,35 F 68,60 F 27,52 F 41,57 F 70,85 F 28,21 F 42,94 F 72,91 F 29,94 F 45,19 F 76,59 F 30,50 F 46,08 F 78,16 F 31,52 F 47,79 F 80,72 F 32,03 F 48,69 F 82,47 F 33,64 F 51,74 F 86,08 F 34,12 F 51,96 F 88,02 F 35,66 F 54,23 F 91,49 F 37,25 F 56,15 F 95,48 F 38,62 F 58,55 F 99,29 F 40,02 F 61,01 F 103,09 F 40,88 F 62,03 F 105,37 F 45,19 F 68,44 F 115,58 F 49,02 F 74,16 F 125,62 F 50,64 F 75,83 F 128,70 F 53,01 F 80,21 F 135,67 F 54,41 F 82,47 F 139,66 F 56,15 F 85,07 F 144,20 F 60,64 F 91,49 F 155,28 F 70,85 F 107,95 F 181,26 F 76,22 F 115,95 F 194,61 F 83,70 F 127,04 F 214,40 F 102,10 F 155,28 F 262,23 F HPC Volume 4 2013 4 35 RPP-heavy duty timing belt Chloroprene rubber belt Pitch RPP14 with glass fibre tension members - To be used with HTD14M pulley - Pitch 14mm - Output up to 98% - Materials: chloroprene rubber reinforced 9,70 6 with glass fibres nylon protective film 14 .Advantages. - Shock-resistant - The RPP parabolic tooth profile gives a higher torque capability and greater resistance to tooth jump discounts .Accessories. Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request - Pulleys HTD14M - Belt idler rollers RE Part number RPP14/966 RPP14/994 RPP14/1092 RPP14/1106 RPP14/1190 RPP14/1260 RPP14/1288 RPP14/1344 RPP14/1400 RPP14/1442 RPP14/1568 RPP14/1610 RPP14/1764 RPP14/1778 RPP14/1848 RPP14/1890 RPP14/1904 RPP14/1960 RPP14/2100 RPP14/2240 RPP14/2310 RPP14/2380 RPP14/2450 RPP14/2590 RPP14/2660 RPP14/2800 RPP14/2968 RPP14/3150 RPP14/3360 RPP14/3500 RPP14/3850 RPP14/3920 RPP14/4326 RPP14/4578 RPP14/4956 Dimensions in mm 36 4 Price each 1 to 5 for a width of N°. of teeth 55mm 85mm 69 166,55 F 272,45 F 71 167,59 F 274,55 F 78 168,45 F 276,76 F 79 170,72 F 280,43 F 85 179,54 F 281,48 F 90 180,40 F 282,67 F 92 182,31 F 285,80 F 96 188,58 F 298,27 F 100 196,33 F 307,63 F 103 202,25 F 316,83 F 112 208,83 F 324,81 F 115 214,40 F 333,48 F 126 228,40 F 351,48 F 127 231,03 F 354,27 F 132 234,47 F 358,59 F 135 239,67 F 366,73 F 136 241,44 F 369,54 F 140 242,98 F 371,22 F 150 256,50 F 397,62 F 160 264,13 F 401,24 F 165 272,45 F 413,73 F 170 275,22 F 427,08 F 175 281,48 F 439,53 F 185 289,30 F 452,03 F 190 297,06 F 474,76 F 200 312,68 F 499,70 F 212 324,92 F 506,03 F 225 337,12 F 512,32 F 240 359,28 F 546,14 F 250 362,40 F 563,82 F 275 393,26 F 611,15 F 280 394,65 F 622,23 F 309 435,57 F 670,60 F 327 456,19 F 703,74 F 354 487,58 F 757,78 F Length 966 994 1092 1106 1190 1260 1288 1344 1400 1442 1568 1610 1764 1778 1848 1890 1904 1960 2100 2240 2310 2380 2450 2590 2660 2800 2968 3150 3360 3500 3850 3920 4326 4578 4956 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 RPP type belt by the metre Polyurethane with steel core Pitch - 5mm, 8mm and 14mm pitches - For linear movements - Fixed using rigid connecting plate RPP5 RPP8 RPP14 ar For line ng i n positio .Applications. - Reciprocating movements .Accessories. - RPPP.../P connecting plates - HTD pulleys .Info.. - Minimum length 1000mm - Supplied in multiples of 1 metre - When ordering, add the length (L) and width (l)to the part number (RPP5M/L/l) E.g. : RPP5M/1000/15 RPP5M 5 3,80 2,00 RPP8M 8 5,40 3,20 RPP14M Typical application 9,70 14 6 DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Price each 1 to 5 per metre for widths of 15mm 20mm 25mm 30mm 50mm 55mm 85mm Part number Pitch RPP5M RPP5 - - - - - 14,06 F 25,78 F RPP8M RPP8 - - - 22,51 F 29,90 F 35,70 F RPP14M RPP14 - - - - - 62,80 F 103,83 F Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 37 Connecting plate For open belts RPP5M, RPP8M pitch and RPP14M RPP5 RPP8 RPP14 - 5mm,8mm and 14mm pitches - For linear movements - Rigid connecting plates - Material : aluminium .Applications. - For closing an open belt - To attach an open belt to a structure A .Accessories. 7P - RPP../P belts - HTD pulleys d B P S F C F 5P Typical application Part number RPP5/15P RPP5/25P RPP8/20P RPP8/30P RPP8/50P RPP14/55P RPP14/85P Pitch RPP5 RPP5 RPP8 RPP8 RPP8 RPP14 RPP14 Dimensions in mm 38 4 F 6 6 8 8 8 10 10 Volume  4 2013 d 5,5 5,5 9,0 9,0 9,0 11,0 11,0 P+B DISCOUNTS Qty. 1+ 6+ 20+ Disc. List -10% On request B 3,25 3,25 5,00 5,00 5,00 9,00 9,00 HPC A 41,5 41,5 66,0 66,0 66,0 116,0 116,0 S 8 8 15 15 15 22 22 C 34 44 45 55 75 86 116 Belt width 15 25 20 30 50 55 85 Price each 1 to 5 10,82 F 13,21 F 36,26 F 41,68 F 55,34 F 141,06 F 185,51 F www.hpceurope.com - +33(0)4 37 496 496 Portal Free access from our website X Z Y + than 1000 different product ranges available for download www.hpceurope.com - +33(0)4 37 496 496 lley u p ng belts i Tim and .83 -p 2 4 p. T type Toothed bar until -30% p.44 T type timing pulley Tooth bar p.42 Moulded plastic T-type timing pulley p.47 T type timing belt p.48 p.57 T type timing belt by the metre p.62 p.63 AT-type Toothed bar until -30% Connecting plate for T type timing belts p.64 AT-type closed timing belt p.78 AT-type timing pulley p.66 AT-type timing belt by the metre p.80 Toothed bar machined to order Aluminium or brass AAG ABG - Bar stock with teeth machined to your requirements - All types of tooth form Spur or helical gear module 0.4 to module 2 Pulley pitch 2.5mm to 5mm - Bar diameter 20mm to 100mm - Precision class 9 .Option. - Stainless steel 303, TUFNOL .Info.. your Choose orm f tooth ØD Ø20mm to Ø100mm - *  When ordering toothed bars in helical form, face width will be 115mm - ** Dimensions ØA and L are not guaranteed and are given as a guide only - These bars are not kept in stock but are manufactured on demand ØA ANY TYPE OF TOOTH 130* L TL discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ALUMINIUM 6082 Part number AAG2 AAG3 AAG4 AAG5 AAG6 ØD between L** TL 20 and 30 30 160 31 and 40 30 160 41 and 50 40 170 51 and 60 40 170 61 and 100 40 170 ØD GREATER THAN 100mm ON REQUEST BRASS CZ121 Part number ABG2 ABG3 ABG4 ABG5 ABG6 Dimensions in mm 42 4 ØD between L TL 20 and 30 30 160 31 and 40 30 160 41 and 50 40 170 51 and 60 40 170 61 and 100 40 170 ØD GREATER THAN 100mm ON REQUEST Volume  4 2013 HPC Boss ØA** 12 15 20 25 25 Price each 1 to 5 86,90 F 97,69 F 173,91 F 196,99 F 350,54 F Boss ØA 12 15 20 25 25 Price each 1 to 5 100,32 F 122,15 F 208,61 F 250,38 F 394,70 F www.hpceurope.com - +33(0)4 37 496 496 Toothed bar machined to order Steel or Delrin ASG ADG - Bar stock with teeth machined to your requirements - All types of tooth form Spur or helical gear module 0.4 to module 2 Pulley pitch 2.5mm to 5mm - Bar diameter 20mm to 100mm - Precision class 9 .Option. - Stainless steel 303, TUFNOL your Choose orm tooth f ØD Ø20mm to Ø100mm .Info.. - *  When ordering toothed bars in helical form, face width will be 115mm - ** Dimensions ØA and L are not guaranteed and are given as a guide only - These bars are not kept in stock but are manufactured on demand ØA ANY TYPE OF TOOTH 130* L TL discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL 34C10 Part number ASG2 ASG3 ASG4 ASG5 ASG6 delrin Part number ADG2 ADG3 ADG4 ADG5 ADG6 Dimensions in mm ØD between 20 et 30 31 et 40 41 et 50 51 et 60 61 et 100 ØD between 20 et 30 31 et 40 41 et 50 51 et 60 61 et 100 L** TL 30 160 30 160 40 170 40 170 40 170 ØD GREATER THAN 100mm ON REQUEST L TL 30 160 30 160 40 170 40 170 40 170 ØD SUPERIEUR A 100mm On request +33(0)4 37 490 055 - cial2@hpceurope.com HPC Boss ØA** 12 15 20 25 25 Price each 1 to 5 67,14 F 87,92 F 145,52 F 191,10 F 341,93 F Boss ØA 12 15 20 25 25 Price each 1 to 5 65,89 F 85,49 F 113,70 F 170,73 F 322,78 F Volume 4 2013 4 43 T type tooth bar stock Aluminium T2.5-BAR - B  ar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodic oxidation - Finish : Supplied not-treated Ø D .Info.. - W  e are unable to modify this product Part number 10T2.5-BAR 12T2.5-BAR 13T2.5-BAR 14T2.5-BAR 15T2.5-BAR 16T2.5-BAR 17T2.5-BAR 18T2.5-BAR 19T2.5-BAR 20T2.5-BAR 21T2.5-BAR 22T2.5-BAR 24T2.5-BAR 26T2.5-BAR 27T2.5-BAR 28T2.5-BAR 29T2.5-BAR 30T2.5-BAR 32T2.5-BAR 34T2.5-BAR 35T2.5-BAR 36T2.5-BAR 38T2.5-BAR 40T2.5-BAR 42T2.5-BAR 44T2.5-BAR 45T2.5-BAR 48T2.5-BAR 50T2.5-BAR 60T2.5-BAR 65T2.5-BAR 70T2.5-BAR 72T2.5-BAR 90T2.5-BAR 100T2.5-BAR Dimensioni in mm 44 4 -30% Z Teeth 10 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32 34 35 36 38 40 42 44 45 48 50 60 65 70 72 90 100 Volume  4 2013 L D L T ØD External 7,45 9,00 9,80 10,60 11,40 12,20 13,00 13,80 14,60 15,40 16,20 17,00 18,55 20,15 20,95 21,75 22,55 23,35 24,95 26,55 27,35 28,10 29,70 31,30 32,90 34,50 35,30 37,70 39,29 47,25 51,20 55,20 56,80 71,12 79,08 HPC Length of teeth L D 50 50 50 50 50 50 50 50 90 90 90 125 125 125 125 125 125 125 125 125 132 132 140 140 140 140 140 140 160 160 160 160 160 160 160 DISCOUNTS Qty 1+ 6+ 20+ 40+ disc. List -12% -25% On request Price each Total length L T 1 to 5 75 2,35 F 75 2,42 F 75 2,52 F 75 2,67 F 75 2,85 F 75 2,92 F 75 2,99 F 75 3,10 F 120 5,64 F 120 5,88 F 120 6,42 F 140 8,35 F 140 9,06 F 140 9,92 F 140 10,02 F 140 10,28 F 140 10,88 F 140 10,95 F 140 11,85 F 140 12,45 F 140 13,23 F 140 14,20 F 140 14,45 F 140 15,59 F 140 17,35 F 140 19,27 F 140 19,66 F 140 20,80 F 160 25,27 F 160 32,77 F 160 37,87 F 160 41,44 F 160 43,72 F 160 63,43 F 160 84,82 F www.hpceurope.com - +33(0)4 37 496 496 T type tooth bar stock Aluminium T5-BAR -30% - Bar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodic oxidation - Finish : Supplied not-treated Ø D .Info.. - W  e are unable to modify this product Part number 10T5-BAR 11T5-BAR 12T5-BAR 13T5-BAR 14T5-BAR 15T5-BAR 16T5-BAR 17T5-BAR 18T5-BAR 19T5-BAR 20T5-BAR 21T5-BAR 22T5-BAR 23T5-BAR 24T5-BAR 25T5-BAR 26T5-BAR 27T5-BAR 28T5-BAR 29T5-BAR 30T5-BAR 32T5-BAR 34T5-BAR 35T5-BAR 36T5-BAR 37T5-BAR 38T5-BAR 40T5-BAR 42T5-BAR 44T5-BAR 45T5-BAR 46T5-BAR 48T5-BAR 50T5-BAR 60T5-BAR 72T5-BAR 80T5-BAR 90T5-BAR 100T5-BAR Z Teeth 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 35 36 37 38 40 42 44 45 46 48 50 60 72 80 90 100 L D L T ØD External 15,05 16,65 18,25 19,85 21,45 23,05 24,60 26,20 27,00 29,40 31,00 32,70 34,15 35,85 37,40 38,95 40,60 42,20 43,75 45,35 46,95 50,10 53,25 54,85 56,45 58,06 59,65 62,85 66,00 69,20 70,80 72,40 75,55 78,75 94,65 113,75 126,48 142,40 158,31 +33(0)4 37 490 055 - cial2@hpceurope.com Length of teeth L D 125 125 125 125 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 HPC DISCOUNTS Qty 1+ 6+ 20+ 40+ disc. List -12% -25% On request Total length L T 140 140 140 140 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 Price each 1 to 5 6,81 F 7,38 F 8,06 F 8,09 F 9,45 F 10,24 F 11,49 F 12,02 F 13,35 F 14,49 F 16,66 F 17,38 F 19,34 F 19,52 F 20,95 F 22,49 F 24,80 F 24,99 F 27,51 F 27,63 F 29,44 F 34,20 F 37,37 F 37,62 F 39,72 F 41,94 F 42,15 F 45,83 F 49,72 F 58,22 F 58,61 F 59,14 F 65,47 F 73,00 F 98,49 F 138,44 F 161,53 F 212,62 F 274,81 F Volume 4 2013 4 45 T type tooth bar stock Aluminium T10-BAR - B  ar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodic oxidation - Finish : Supplied not-treated ØD .Info.. - W  e are unable to modify this product L D -30% L T DISCOUNTS Part number 10T10-BAR 11T10-BAR 12T10-BAR 13T10-BAR 14T10-BAR 15T10-BAR 16T10-BAR 17T10-BAR 18T10-BAR 19T10-BAR 20T10-BAR 21T10-BAR 22T10-BAR 23T10-BAR 24T10-BAR 26T10-BAR 28T10-BAR 30T10-BAR 32T10-BAR 34T10-BAR 36T10-BAR 38T10-BAR 40T10-BAR 45T10-BAR 48T10-BAR 60T10-BAR 72T10-BAR Dimensioni in mm 46 4 Z Teeth 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 28 30 32 34 36 38 40 45 48 60 72 Volume  4 2013 ØD External 29,98 33,16 36,35 39,55 42,70 45,90 49,10 52,25 55,45 58,65 61,80 65,00 68,15 71,35 74,55 80,90 87,25 93,65 100,00 106,40 112,75 119,10 125,45 141,40 150,95 189,15 227,29 HPC Length of teeth L D 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 Qty 1+ 6+ 20+ 40+ disc. List -12% -25% On request Total length L T 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 Price each 1 to 5 12,81 F 14,99 F 17,42 F 18,77 F 23,63 F 26,20 F 29,80 F 32,70 F 35,80 F 40,08 F 43,55 F 47,29 F 55,90 F 56,40 F 62,97 F 70,64 F 78,64 F 95,34 F 104,67 F 114,45 F 127,23 F 145,75 F 157,29 F 207,80 F 222,12 F 365,92 F 523,43 F www.hpceurope.com - +33(0)4 37 496 496 T-type moulded nylon timing pulley Nylon PA6 PITCH T2.5 Belt width 6mm - Pitch 2.5mm (T2,5) - Material: Moulded PA6 nylon reinforced with 30% glass fibre - HPC are unable to modify these parts 19 y range Econom ØA ØE ØM ØD hole e-bored ØA: Pr be finished must 9,5 17,5 DISCOUNTS 1 flange Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request Pre-bore Price each ØA ØE Z ØD ØM Stock* Part number 1 to 5 (mm) (mm) teeth (mm) (mm) 10T2.5-10-N1F 10 7,40 12 3 12 4 4,57 F 11T2.5-10-N1F 11 8,20 12 3 12 - 4,57 F 12T2.5-10-N1F 12 9,00 12 3 12 4 4,57 F 13T2.5-10-N1F 13 9,80 12 3 12 - 4,98 F 14T2.5-10-N1F 14 10,60 12 3 15 - 4,98 F 15T2.5-10-N1F 15 11,40 12 3 15 4 5,57 F 16T2.5-10-N1F 16 12,18 12 3 16 4 5,57 F 22T2.5-10-N1F 22 17,00 14 3 22 4 6,76 F 23T2.5-10-N1F 23 17,75 14 3 22 - 6,76 F 24T2.5-10-N1F 24 18,55 14 3 24 4 6,76 F 25T2.5-10-N1F 25 19,35 14 3 24 4 7,16 F 26T2.5-10-N1F 26 20,14 16 4 26 4 7,16 F 28T2.5-10-N1F 28 21,75 16 4 28 - 7,16 F 29T2.5-10-N1F 29 22,52 16 4 28 - 7,16 F 30T2.5-10-N1F 30 23,35 18 5 30 4 7,55 F 31T2.5-10-N1F 31 24,10 18 5 30 - 7,55 F 32T2.5-10-N1F 32 24,95 18 5 32 4 7,55 F 33T2.5-10-N1F 33 25,70 18 5 32 4 7,55 F *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 47 T-type timing pulley Aluminium Pitch T2.5 T Belt width 4mm - Pitch 2.5mm - Materials: Pulley: Aluminium 6082 Flanges: Aluminum for pulleys with up to 84 teeth, steel for 85 teeth or more - All pulleys have flanges Flange reference ØM ØD 8 15 .Options. PT (optional) ØE ØA H8 Belt 4mm 8 Hole for M3 grubscrew -  Choose from 10 to 230 teeth DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 230T2,5-8 230 ØD ØM (mm) (mm) 7,40 13 9,00 13 10,60 18 11,40 18 12,20 18 13,80 18 14,60 20 15,40 20 16,20 20 17,00 20 18,55 13 19,35 13 20,15 13 23,35 20 24,15 20 24,95 20 31,30 24 34,50 24 37,70 24 40,85 24 44,85 24 47,25 24 63,16 24 66,35 24 ØA (mm) 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 6 6 Flange ref. 10 X,Y 10 X,Y 16 X,Y 16 X,Y 16 X,Y 31 X,Y 32 X,Y 32 X,Y 32 X,Y 32 X,Y 12 XL 12 XL 12 XL 16 XL 18 XL 18 XL 21XL 21XL 24XL 24XL 28XL 30XL 17H 18H ØE (mm) 13,00 13,00 18,00 18,00 18,00 18,00 20,00 20,00 20,00 20,00 25,15 25,15 25,15 31,74 34,80 34,80 39,68 39,68 44,70 44,70 51,05 54,36 74,61 79,38 Stock* Stock* 4 4 4 4 4 4 4 4 - 4 - 4 4 - - 4 4 - 4 - - 4 4 - Pulleys available up to this size dimensions : contact us Price each 1 to 5 T PT On request PCD (mm) 7,96 9,55 11,14 11,94 12,73 14,32 15,12 15,92 16,71 17,51 19,10 19,89 20,69 23,87 24,67 25,46 31,83 35,01 38,20 41,38 45,36 47,75 63,66 66,85 On request Z Part number Teeth 10T2.5-8 10 12T2.5-8 12 14T2.5-8 14 15T2.5-8 15 16T2.5-8 16 18T2.5-8 18 19T2.5-8 19 20T2.5-8 20 21T2.5-8 21 22T2.5-8 22 24T2.5-8 24 25T2.5-8 25 26T2.5-8 26 30T2.5-8 30 31T2.5-8 31 32T2.5-8 32 40T2.5-8 40 44T2.5-8 44 48T2.5-8 48 52T2.5-8 52 57T2.5-8 57 60T2.5-8 60 80T2.5-8 80 84T2.5-8 84 *Depending on availabiliity - Dimensions in mm 48 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 T-type timing pulley Aluminium PAS - Pitch 2.5mm - Matierials: Pulley: Aluminium 6082 Flanges: Aluminum for pulleys with up to 84 teeth, steel for 85 teeth or more - All pulleys have flanges T2,5 T Belt width 6mm Flange reference PT (optional) ØM ØD .Options. ØE ØA H8 -  Choose from 10 to 230 teeth 10 17 Hole for M3 grubscrew Belt 6mm 10 DISCOUNTS 230T2,5-10 230 ØD ØM (mm) (mm) 7,40 13 9,00 13 10,60 18 11,40 18 12,20 18 13,80 18 14,60 20 15,40 20 16,20 20 17,00 20 18,55 13 19,35 13 20,15 13 23,35 20 24,15 20 24,95 20 31,30 24 34,50 24 37,70 24 40,85 24 44,85 24 47,25 24 63,16 24 66,35 24 ØA (mm) 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 6 6 Flange ref. 10 X,Y 10 X,Y 16 X,Y 16 X,Y 16 X,Y 31 X,Y 32 X,Y 32 X,Y 32 X,Y 32 X,Y 12 XL 12 XL 12 XL 16 XL 18 XL 18 XL 21XL 21XL 24XL 24XL 28XL 30XL 17H 18H ØE Price each 1 to 5 (mm) Stock* * T PT 13,00 4 13,00 4 18,00 4 18,00 4 18,00 4 18,00 4 20,00 - 20,00 - 20,00 - 20,00 4 25,15 4 25,15 - 25,15 4 31,74 - 34,80 - 34,80 4 39,68 4 39,68 - 44,70 - 44,70 - 51,05 - 54,36 - 74,61 4 79,38 - Stock Pulleys available up to this size dimensions : contact us *Depending on availabiliity - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request PCD (mm) 7,96 9,55 11,14 11,94 12,73 14,32 15,12 15,92 16,71 17,51 19,10 19,89 20,69 23,87 24,67 25,46 31,83 35,01 38,20 41,38 45,36 47,75 63,66 66,85 On request Z Part number Teeth 10T2.5-10 10 12T2.5-10 12 14T2.5-10 14 15T2.5-10 15 16T2.5-10 16 18T2.5-10 18 19T2.5-10 19 20T2.5-10 20 21T2.5-10 21 22T2.5-10 22 24T2.5-10 24 25T2.5-10 25 26T2.5-10 26 30T2.5-10 30 31T2.5-10 31 32T2.5-10 32 40T2.5-10 40 44T2.5-10 44 48T2.5-10 48 52T2.5-10 52 57T2.5-10 57 60T2.5-10 60 80T2.5-10 80 84T2.5-10 84 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Volume 4 2013 4 49 T-type timing pulley Aluminium PITCH T5 T Belt width 6mm - P  itch 5mm - Materials: Pulley: Aluminium 6082 Flanges: Aluminum for pulleys with up to 46 teeth, steel for 47 teeth or more - All pulleys have flanges PT (optional) ØM ØD ØE ØA H8 11 20 .Options. Flange reference Hole for M4 grubscrew Belt 6mm 11 -  Choose from 10 to 150 teeth DISCOUNTS 150T5-11 150 PCD ØD (mm) (mm) 15,92 15,05 19,10 18,25 22,28 21,45 23,87 23,05 25,46 24,60 27,06 26,20 28,65 27,80 30,24 29,40 31,83 31,00 38,20 37,80 39,79 39,00 47,75 46,95 50,93 50,10 57,30 56,45 58,89 58,05 63,66 62,85 71,62 70,80 76,39 75,55 79,58 78,75 89,13 88,30 95,49 94,65 111,41 110,60 127,32 126,50 133,69 132,85 ØA (mm) 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 Flange ØE Price each 1 to 5 ref. (mm) T PT 11XL 23,62 12XL 25,15 14XL 28,44 14XL 28,44 14XL 28,44 16XL 31,74 18XL 34,80 18XL 34,80 20XL 38,10 24XL 44,70 24XL 44,70 28XL 51,05 16L 55,56 14H 61,91 15H 66,68 16H 69,85 18H 79,38 19H 82,55 20H 85,73 22H 95,25 24H 103,19 28H 119,06 32H 134,94 33H 139,70 Pulleys available up to this size Dimensions in mm 50 4 ØM (mm) 12 13 16 16 16 16 20 20 20 25 25 30 30 30 40 40 40 40 60 60 60 60 60 60 Volume  4 2013 dimensions : contact us HPC On request Z Teeth 10 12 14 15 16 17 18 19 20 24 25 30 32 36 37 40 45 48 50 56 60 70 80 84 On request Part number 10T5-11 12T5-11 14T5-11 15T5-11 16T5-11 17T5-11 18T5-11 19T5-11 20T5-11 24T5-11 25T5-11 30T5-11 32T5-11 36T5-11 37T5-11 40T5-11 45T5-11 48T5-11 50T5-11 56T5-11 60T5-11 70T5-11 80T5-11 84T5-11 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request www.hpceurope.com - +33(0)4 37 496 496 T-type timing pulley Aluminium PITCH - P  itch 5mm - Materials: Pulley: Aluminium 6082 Flanges: Aluminum for pulleys with up to 46 teeth, steel for 47 teeth or more - All pulleys have flanges T5 T Belt width 10mm Flange reference PT ØM ØD .Options. ØE ØA H8 -  Choose from 10 to 150 teeth 15 24 Hole for M4 grubscrew Belt 10mm 15 DISCOUNTS 150T5-11 150 Dimensions in mm Flange ref. 11XL 12XL 14XL 14XL 14XL 16XL 18XL 18XL 20XL 24XL 24XL 28XL 16L 14H 15H 16H 18H 19H 20H 22H 24H 28H 32H 33H ØE Price each 1 to 5 (mm) Stock* T PT 23,62 4 25,15 - 28,44 4 28,44 4 28,44 4 31,74 - 34,80 4 34,80 4 38,10 4 44,70 - 44,70 4 51,05 4 55,56 4 61,91 4 66,68 - 69,85 4 79,38 - 82,55 4 85,73 4 95,25 - 103,19 4 119,06 - 134,94 - 139,70 - Pulleys available up to this size dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request ØA (mm) 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 On request Z PCD ØD ØM Part number Teeth (mm) (mm) (mm) 10T5-15 10 15,92 15,05 12 12T5-15 12 19,10 18,25 13 14T5-15 14 22,28 21,45 16 15T5-15 15 23,87 23,05 16 16T5-15 16 25,46 24,60 16 17T5-15 17 27,06 26,20 16 18T5-15 18 28,65 27,80 20 19T5-15 19 30,24 29,40 20 20T5-15 20 31,83 31,00 20 24T5-15 24 38,20 37,35 25 25T5-15 25 39,79 39,00 25 30T5-15 30 47,75 46,95 30 32T5-15 32 50,93 50,10 30 36T5-15 36 57,30 56,45 30 37T5-15 37 58,89 58,05 40 40T5-15 40 63,66 62,85 40 45T5-15 45 71,62 70,80 40 48T5-15 48 76,39 75,55 40 50T5-15 50 79,58 78,75 60 56T5-15 56 89,13 88,30 60 60T5-15 60 95,49 94,65 60 70T5-15 70 111,41 110,60 60 80T5-15 80 127,32 126,50 60 84T5-15 84 133,69 132,85 60 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Volume 4 2013 4 51 T-type timing pulley Aluminium PITCH T5 Flange reference T Belt width 16mm - P  itch 5mm - Materials: Pulley: Aluminium 6082 Flanges: Aluminum for pulleys with up to 46 teeth, steel for 47 teeth or more - All pulleys have flanges ØM ØD ØA H8 21 30 .Options. PT (optional) Hole for M4 grubscrew ØE Belt 16mm 21 -  Choose from 10 to 150 teeth DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 150T5-21 150 PCD (mm) 15,92 19,10 22,28 23,87 25,46 27,06 28,65 30,24 31,83 38,20 39,79 47,75 50,93 57,30 58,89 63,66 71,62 76,39 79,58 89,13 95,49 111,41 127,32 133,69 ØD ØM (mm) (mm) 15,05 12 18,25 13 21,45 16 23,05 16 24,60 16 26,20 16 27,80 20 29,40 20 31,00 20 37,35 25 39,00 25 46,95 30 50,10 30 56,45 30 58,05 40 62,85 40 70,80 40 75,55 40 78,75 60 88,30 60 94,65 60 110,60 60 126,50 60 132,85 60 Pulleys available up to this size Dimensions in mm 52 4 ØA Flange ØE Price each 1 to 5 (mm) ref. (mm) Stock* T PT 5 11XL 23,62 4 5 12XL 25,15 - 5 14XL 28,44 4 6 14XL 28,44 - 6 14XL 28,44 - 6 16XL 31,74 - 6 18XL 34,80 4 6 18XL 34,80 - 6 20XL 38,10 - 6 24XL 44,70 - 6 24XL 44,70 4 8 28XL 51,05 4 8 16L 55,56 - 8 14H 61,91 - 8 15H 66,68 - 8 16H 69,85 4 8 18H 79,38 - 8 19H 82,55 4 10 20H 85,73 4 10 22H 95,25 4 10 24H 103,19 4 10 28H 119,06 - 10 32H 134,94 - 10 33H 134,94 4 Volume  4 2013 dimensions : contact us HPC On request Z Teeth 10 12 14 15 16 17 18 19 20 24 25 30 32 36 37 40 45 48 50 56 60 70 80 84 On request Part number 10T5-21 12T5-21 14T5-21 15T5-21 16T5-21 17T5-21 18T5-21 19T5-21 20T5-21 24T5-21 25T5-21 30T5-21 32T5-21 36T5-21 37T5-21 40T5-21 45T5-21 48T5-21 50T5-21 56T5-21 60T5-21 70T5-21 80T5-21 84T5-21 www.hpceurope.com - +33(0)4 37 496 496 Nylon T-type timing pulley Nylon PA6 moulded PITCH T10 Belt width 16mm - Pitch 10mm (T10) - Material: Moulded PA6 nylon reinforced with 30% glass fibre - HPC are unable to modify these parts e-bored ØA: Pr ust be m hole d finishe 34 34 ØA ØD ØE ØM 22 1 Flange 32 ØE ØM ØA 2 Flanges ØD 22 32 y range Econom DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request Price each Pre-bore Part number 1 to 5 Z ØD ØM ØA ØE teeth (mm) (mm) (mm) (mm) 1 flange 2 flanges 1 flange 2 flanges - 18T10-21-N2F 18 55,45 40 13 60 - 8,88 F 20T10-21-N2F 20 61,80 40 12 67 - - 9,93 F 22T10-21-N2F 22 68,20 40 14 75 - - 10,82 F 24T10-21-N2F 24 74,75 40 13 83 - - 11,89 F 30T10-21-N1F - 30 93,65 50 14 99 - 16,63 F 32T10-21-N1F - 32 100,00 50 14 105 20,04 F - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 53 T-type timing pulley Aluminium Pitch T10 Belt width 16mm - Pitch 10mm - Materials: Pulley: aluminium Flanges: steel .Info.. y Econom range - HPC are unable to modify these parts ØE ØA ØM Dp ØD 21 31 discounts Belt width 16mm Part number 12T10-21-AL 14T10-21-AL 15T10-21-AL 16T10-21-AL 18T10-21-AL 19T10-21-AL 20T10-21-AL 22T10-21-AL 24T10-21-AL 25T10-21-AL 26T10-21-AL 27T10-21-AL 28T10-21-AL 30T10-21-AL 32T10-21-AL 36T10-21-AL 40T10-21-AL Z teeth 12 14 15 16 18 19 20 22 24 25 26 27 28 30 32 36 40 PCD (mm) 38,35 44,70 47,90 51,10 57,45 60,65 63,80 70,20 76,55 79,75 82,90 86,10 89,25 95,65 102,00 114,75 127,45 ØD (mm) 36,35 42,70 45,90 49,10 55,45 58,65 61,80 68,20 74,55 77,75 80,90 84,10 87,25 93,65 100,00 112,75 125,45 ØE (mm) 42 48 51 54 60 66 66 75 83 83 87 91 93 102 106 119 131 HPC www.hpceurope.com - +33(0)4 37 496 496 *Depending on availability - Dimensions in mm 54 4 Volume  4 2013 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request ØA ØM each Stock* Price (mm) (mm) 1 to 5 28 6 4 13,59 F 32 8 4 15,03 F 32 8 4 15,81 F 35 8 4 16,59 F 40 8 4 20,79 F 44 8 - 21,58 F 46 8 4 22,80 F 52 8 - 23,57 F 58 8 4 26,38 F 60 8 - 29,04 F 60 8 - 30,29 F 60 8 - 31,73 F 60 8 - 33,68 F 60 8 - 35,11 F 65 10 - 42,27 F 70 10 4 48,53 F 80 10 - 58,12 F T-type timing pulley Aluminium Pitch T10 - Pitch 10mm - Materials: Pulley: aluminium Flanges: steel Belt width 25mm .Info.. - HPC are unable to modify these parts ØE ØA ØM Dp ØD Belt width 25mm y Econom range 30 discounts 40 Part number 12T10-30-AL 14T10-30-AL 15T10-30-AL 16T10-30-AL 18T10-30-AL 19T10-30-AL 20T10-30-AL 22T10-30-AL 24T10-30-AL 25T10-30-AL 26T10-30-AL 27T10-30-AL 28T10-30-AL 30T10-30-AL 32T10-30-AL 36T10-30-AL 40T10-30-AL Z teeth 12 14 15 16 18 19 20 22 24 25 26 27 28 30 32 36 40 PCD (mm) 38,35 44,70 47,90 51,10 57,45 60,65 63,80 70,20 76,55 79,75 82,90 86,10 89,25 95,65 102,00 114,75 127,45 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request ØD (mm) 36,35 42,70 45,90 49,10 55,45 58,65 61,80 68,20 74,55 77,75 80,90 84,10 87,25 93,65 100,00 112,75 125,45 *Depending on availability - Dimensions in mm ØE (mm) 42 48 51 54 60 66 66 75 83 83 87 91 93 102 106 119 131 +33(0)4 37 490 055 - cial2@hpceurope.com ØM (mm) 28 32 32 35 40 44 46 52 58 60 60 60 60 60 65 70 80 HPC ØA (mm) 6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 Stock* 4 - 4 4 4 4 4 4 4 - - 4 4 4 4 4 4 Volume 4 2013 Price each 1 to 5 15,51 F 18,31 F 19,27 F 19,82 F 23,57 F 25,02 F 26,38 F 27,69 F 30,90 F 32,76 F 34,86 F 36,42 F 38,31 F 40,89 F 48,83 F 54,13 F 66,89 F 4 55 Timing belt lenght Each belt has a fixed length, therefore when designing your system include a mechanism for altering the distance between the pulleys so that the belt can be tensioned correctly. Please see our ranges of belt idlers (TRE, TPX, MIX or AH) and rollers (RE or XRP). Please feel free to contact us if you need assistance when dimensioning your system. B ß = Contact angle D1 = Pitch diameter of large pulley D2 = Pitch diameter of small pulley a = Axle distance BC = Length of unattached belt CD = Length of contact with small pulley AB = Length of contact with large pulley L = Total belt length EF = Elevation EF D1 ß D2 ß D A a D2 EF = D1 - D2 2 SIN ß = EF a BC = EF TAN ß D1 AB = π x D1 [(2 x ß) + 180] 360 CD = π x D2 (90 - ß) 180 L = D 1 + D 2 + (2 x a) 0,6366 L = (2 x BC) + AB + CD No. of = teeth 56 4 a If the difference in the number of teeth for the two pulleys is not greater than 5, the belt length can be calculated as shown: L p Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 T-type timing belt Steel cored polyurethane Pitch - - - - SINGLE SIDED  itch 2.5mm P Working temp. -30°C to +80°C Max. speed 40m/s Output up to 98% T2.5 Din 7721 .Options. - Belt by the metre T2.5M - Alternative lengths/widths T2,5 .Accessories. - A  H arm and RE roller belt idler 2,5 0,6 40 0,7 .Info.. 1 T 2,5/120 T 2,5/145 T 2,5/160 T 2,5/177 T 2,5/180 T 2,5/182 T 2,5/200 T 2,5/230 T 2,5/245 T 2,5/265 T 2,5/285 T 2,5/290 T 2,5/317 T 2,5/330 T 2,5/380 T 2,5/420 T 2,5/480 T 2,5/500 T 2,5/600 T 2,5/620 T 2,5/650 T 2,5/780 T 2,5/950 Length 120,00 145,00 160,00 177,50 180,00 182,50 200,00 230,00 245,00 265,00 285,00 290,00 317,50 330,00 380,00 420,00 480,00 500,00 600,00 620,00 650,00 780,00 950,00 Compatible with T2.5 pulley No. of teeth 48 58 64 71 72 73 80 92 98 106 114 116 127 132 152 168 192 200 240 248 260 312 380 Stock* 4mm 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 - 4 4 4 - - 4 4 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Stock* 6mm 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 - HPC Price each 1 to 5 for widths 4mm 6mm 10mm 9,07 F 10,07 F 9,19 F 10,17 F 9,22 F 10,22 F 9,42 F 10,46 F 9,42 F 10,46 F 9,42 F 10,46 F 9,42 F 10,46 F 10,08 F 11,24 F 10,00 F 11,12 F 10,09 F 11,25 F 10,15 F 11,29 F 10,57 F 11,77 F 10,53 F 11,71 F 10,66 F 11,83 F 11,25 F 12,50 F 14,35 F 12,47 F 11,66 F 12,94 F 11,83 F 13,13 F 16,19 F 17,99 F 16,81 F 18,70 F 16,46 F 18,25 F 18,97 F 21,11 F 20,96 F 23,31 F On request - W  hen ordering, add the width to the part number Eg: T2.5/120/4 Part number o Volume 4 2013 4 57 T-type timing belts Steel cored polyurethane Pitch T5 - - - - SINGLE SIDED  itch 5mm P Working temp. -30°C to +80°C Max. speed 40m/s Output up to 98% Din 7721 .Options. - Belt by the metre T5M - Alternative lengths/widths Compatible with T5 pulley .Accessories. - AH arm and RE roller belt idler .Info.. - W  hen ordering. add the width to the part number Eg: T5/120/4 T5 5 1 40 1,2 o 1,8 DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Teeth 30 37 40 42 43 44 45 49 50 51 52 54 56 59 Stock* 6mm 4 4 4 - - - 4 4 - - 4 4 4 - Stock* 10mm - 4 4 4 - - 4 4 4 4 - 4 4 4 *Depending on availability - Dimensions in mm 58 4 Volume  4 2013 HPC Stock* 16mm - 4 4 - - - 4 - - - - 4 - 4 Price each 1 to 5 for widths 6mm 10mm 16mm 25mm 10,90 F 14,14 F 20,53 F 11,09 F 14,59 F 21,02 F 11,12 F 14,62 F 21,14 F 11,55 F 15,23 F 21,93 F 11,22 F 14,84 F 21,35 F 11,22 F 14,84 F 21,35 F 11,25 F 14,92 F 21,49 F 11,36 F 15,14 F 21,76 F 11,77 F 15,61 F 22,41 F 11,41 F 11,41 F 21,86 F 11,41 F 15,14 F 21,86 F 11,46 F 15,24 F 21,95 F 11,51 F 15,34 F 22,11 F 11,61 F 15,54 F 22,33 F On request Part number Length T 5/150 150 T 5/185 185 T 5/200 200 T 5/210 210 T 5/215 215 T 5/220 220 T 5/225 225 T 5/245 245 T 5/250 250 T 5/255 25 5 T 5/260 260 T 5/270 270 T 5/280 280 T 5/295 295 www.hpceurope.com - +33(0)4 37 496 496 Pitch T5 DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Teeth 61 66 68 71 73 78 80 82 84 91 92 96 100 102 105 109 110 112 115 118 122 124 126 130 138 144 150 153 156 163 168 180 198 215 220 232 243 263 276 Stock* 6mm 4 - 4 4 4 4 4 - 4 4 - 4 4 4 - - 4 4 4 - 4 4 4 - - 4 - - - - - - - - - - - - - Stock* 10mm 4 4 4 4 4 4 4 4 4 4 - 4 4 - 4 4 4 4 4 4 4 - 4 - 4 - 4 - - 4 - 4 - - - - 4 - - *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com Stock* 16mm 4 4 - 4 4 - - 4 4 4 - 4 4 - 4 4 4 4 4 - 4 - - 4 4 4 4 - 4 - - - - - - - 4 - 4 Price each 1 to 5 for widths 6mm 10mm 16mm 25mm 11,71 F 15,64 F 22,51 F 11,80 F 15,85 F 22,85 F 11,80 F 15,92 F 22,95 F 11,93 F 16,17 F 23,25 F 11,97 F 16,19 F 23,42 F 11,99 F 16,43 F 27,35 F 12,10 F 16,51 F 23,76 F 12,14 F 16,56 F 24,01 F 12,21 F 16,64 F 24,10 F 12,35 F 16,99 F 24,97 F 12,78 F 17,57 F 25,76 F 12,43 F 17,36 F 25,47 F 12,56 F 17,55 F 25,95 F 12,58 F 17,70 F 26,20 F 12,80 F 17,97 F 26,70 F 13,06 F 18,18 F 27,20 F 13,06 F 18,18 F 27,20 F 13,13 F 18,34 F 27,42 F 13,35 F 18,67 F 27,94 F 13,80 F 19,44 F 29,33 F 13,69 F 19,11 F 28,89 F 13,78 F 19,25 F 29,18 F 13,92 F 19,31 F 29,73 F 14,69 F 20,33 F 31,07 F 14,77 F 20,47 F 31,38 F 15,14 F 21,02 F 32,37 F 15,54 F 21,58 F 33,34 F 16,44 F 22,68 F 34,92 F 16,04 F 22,18 F 34,14 F 16,56 F 23,13 F 35,27 F 16,81 F 23,57 F 36,00 F 17,70 F 24,97 F 37,76 F 18,93 F 26,86 F 40,56 F 20,19 F 27,96 F 43,81 F 20,47 F 29,12 F 44,22 F 22,27 F 31,30 F 47,56 F 22,70 F 31,48 F 48,27 F 25,80 F 34,92 F 52,80 F 26,33 F 35,23 F 53,15 F HPC On request Part number Length T 5/305 305 T 5/330 330 T 5/340 340 T 5/355 355 T 5/365 365 T 5/390 390 T 5/400 400 T 5/410 410 T 5/420 420 T 5/455 455 T 5/460 460 T 5/480 480 T 5/500 500 T 5/510 510 T 5/525 525 T 5/545 545 T 5/550 550 T 5/560 560 T 5/575 575 T 5/590 590 T 5/610 610 T 5/620 620 T 5/630 630 T 5/650 650 T 5/690 690 T 5/720 720 T 5/750 750 T 5/765 765 T 5/780 780 T 5/815 815 T 5/840 840 T 5/900 900 T 5/990 990 T 5/1075 1075 T 5/1100 1100 T 5/1160 1160 T 5/1215 1215 T 5/1315 1315 T 5/1380 1380 Volume 4 2013 4 59 T-type belt Polyurethane with steel core Pitch T10 - Pitch 10mm - Working temp. -30°C to +80°C - Max. speed 40m/s - Output up to 98% .Options. - Belt by the metre T10M - Alternative lengths/widths .Accessories. - AH arm and RE roller belt idler .Info.. - W  hen ordering. add the width to the part number. Eg: T10/120/4 0 pulley Compatible with T1 discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Dimensions in mm 60 4 No. of teeth 26 37 41 50 53 56 60 61 63 66 68 69 70 72 73 75 Volume  4 2013 HPC 16mm 25,34 F 27,41 F 28,40 F 30,69 F 31,40 F 32,65 F 33,58 F 33,70 F 34,70 F 35,71 F 31,91 F 36,72 F 38,17 F 37,96 F 36,37 F 40,08 F Price each 1 to 5 for widths 25mm 32mm 35,16 F 38,27 F 39,48 F 41,98 F 43,04 F 44,51 F 46,05 F 47,03 F 48,54 F 53,70 F 50,10 F 45,42 F 45,42 F 51,84 F 56,73 F 58,04 F 50mm On request Length 260 370 410 500 530 560 600 610 630 660 680 690 700 720 730 750 On request Part number T 10/260 T 10/370 T 10/410 T 10/500 T 10/530 T 10/560 T 10/600 T 10/610 T 10/630 T 10/660 T 10/680 T 10/690 T 10/700 T 10/720 T 10/730 T 10/750 www.hpceurope.com - +33(0)4 37 496 496 Pitch T10 SINGLE-SIDED Din 7721 T10 2 2,5 10 40 o 3,5 discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Dimensions in mm No. of teeth 78 81 84 88 89 92 96 97 98 101 108 111 114 115 121 124 125 130 132 135 139 140 142 146 150 156 161 175 178 188 196 225 16mm 40,25 F 41,49 F 42,78 F 44,25 F 44,75 F 46,05 F 47,54 F 48,06 F 48,54 F 50,10 F 52,85 F 54,53 F 55,63 F 55,86 F 58,67 F 60,21 F 60,38 F 62,89 F 63,69 F 64,98 F 66,96 F 67,47 F 68,24 F 70,00 F on request 73,03 F 76,81 F 83,60 F 85,10 F 90,14 F 95,69 F 118,11 F +33(0)4 37 490 055 - cial2@hpceurope.com Price each 1 to 5 for widths 25mm 32mm 55,10 F 56,84 F 58,67 F 61,17 F 62,19 F 64,18 F 67,18 F 68,01 F 68,70 F 70,75 F 75,27 F 83,86 F 79,35 F 79,79 F 84,09 F 85,81 F 86,63 F 89,94 F 91,15 F 93,17 F 95,98 F 96,44 F 97,67 F 100,26 F 111,37 F 106,27 F 110,05 F 120,65 F 122,88 F 130,47 F 138,02 F 173,42 F HPC Volume 4 2013 50mm On request Length 780 810 840 880 890 920 960 970 980 1010 1080 1110 1140 1150 1210 1240 1250 1300 1320 1350 1390 1400 1420 1460 1500 1560 1610 1750 1780 1880 1960 2250 On request Part number T 10/780 T 10/810 T 10/840 T 10/880 T 10/890 T 10/920 T 10/960 T 10/970 T 10/980 T 10/1010 T 10/1080 T 10/1110 T 10/1140 T 10/1150 T 10/1210 T 10/1240 T 10/1250 T 10/1300 T 10/1320 T 10/1350 T 10/1390 T 10/1400 T 10/1420 T 10/1460 T 10/1500 T 10/1560 T 10/1610 T 10/1750 T 10/1780 T 10/1880 T 10/1960 T 10/2250 4 61 T-type timing belt per metre Steel cored polyurethane Pitch T5 T10 SINGLE-SIDED Din 7721 - Pitches: 2.5, 5 and 10mm - For reciprocating movements - Fixing via rigid connection plates - Working temp. -20°C to +80°C - Max. speed 40m/s - Tolerance over length ±0.8mm/1000mm - Ouput up to 98% .Uses. - Alternating back-and-forth movements ar For line g in position .Accessories. - Connecting plate T.../P .Info.. - Min. length: 1000mm - Supplied in multiples of 1 metre - When ordering. add the length (L)and the width (l) to the part number (T5M/L/l). E.g.: T5M/1000/16 T5M 1 1,2 5 40 o 1,8 T10M 2,5 2 10 40 o 3,5 discounts Typical application Part number Pitch T5M T5 T10M T10 Dimensions in mm 62 4 6mm 16,39 F - Volume  4 2013 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Price 1 to 5, per metre for widths 10mm 16mm 25mm 32mm - 21,35 F 25,27 F 47,64 F - 29,97 F 40,76 F 52,62 F HPC 50mm - 57,95 F www.hpceurope.com - +33(0)4 37 496 496 Connecting plate for T type timing belts For T5M and T10M timing belts Pitch T5 T10 - For linear movements - Rigid connecting plate - Pitch: 5 or 10mm - For use with T5M and T10M belts supplied by the metre - Material: Aluminium .Uses. - F  or closing a belt or attaching one end of a belt to a frame L A d H F B F E G discounts Typical application Part number T5/25P T10/25P T10/32P T10/50P Pitch T5 T10 T10 T10 Dimensions in mm B 44 50 57 75 L 41,5 80,0 80,0 80,0 H 8 15 15 15 E 25 50 50 50 +33(0)4 37 490 055 - cial2@hpceurope.com F 6 8 8 8 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request A Price each Belt 1 to 5 G d width 8,25 5,5 3,25 25 52,41 F 15,00 9,0 5,00 25 56,94 F 15,00 9,0 5,00 32 60,10 F 15,00 9,0 5,00 50 64,64 F HPC Volume 4 2013 4 63 AT type tooth bar stock Aluminium AT5-BAR - B  ar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodic oxidation - Finish : Supplied not-treated .Info.. L D DISCOUNTS Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request L T Part number 12AT5-BAR 13AT5-BAR 14AT5-BAR 15AT5-BAR 16AT5-BAR 18AT5-BAR 19AT5-BAR 20AT5-BAR 21AT5-BAR 22AT5-BAR 23AT5-BAR 24AT5-BAR 25AT5-BAR 26AT5-BAR 28AT5-BAR 30AT5-BAR 32AT5-BAR 34AT5-BAR 36AT5-BAR 38AT5-BAR 40AT5-BAR 42AT5-BAR 44AT5-BAR 46AT5-BAR 48AT5-BAR 52AT5-BAR 56AT5-BAR 60AT5-BAR 64AT5-BAR 72AT5-BAR Dimensions in mm 64 4 Z Teeth 12 13 14 15 16 18 19 20 21 22 23 24 25 26 28 30 32 34 36 38 40 42 44 46 48 52 56 60 64 72 Volume  4 2013 -30%** Ø D - W  e are unable to modify this product ØD External 17,85 19,45 21,05 22,65 24,20 27,40 29,00 30,60 32,30 33,85 35,45 37,00 38,55 40,20 43,25 46,55 49,70 52,85 56,05 59,25 62,45 65,60 68,80 72,00 75,15 81,55 87,90 94,25 100,65 113,35 HPC Length of teeth L D 140 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 Total length L T 140 140 140 140 140 140 140 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 Price each 1 to 5 17,67 F 17,95 F 19,96 F 21,07 F 22,44 F 26,63 F 28,49 F 30,77 F 31,99 F 34,54 F 35,34 F 37,06 F 41,16 F 44,44 F 46,87 F 52,39 F 57,64 F 64,84 F 67,96 F 75,68 F 79,86 F 88,38 F 97,07 F 99,66 F 107,39 F 114,88 F 114,88 F 161,20 F 161,20 F 226,24 F www.hpceurope.com - +33(0)4 37 496 496 AT type tooth bar stock Aluminium AT10-BAR - Bar stock to be cut to length by the customer - The overall length is the same as the maximum length - Material : Aluminium suitable for hard anodic oxidation - Finish : Supplied not-treated .Info.. - W  e are unable to modify this product Ø D -30%** L D DISCOUNTS L T Part number 15AT10-BAR 16AT10-BAR 18AT10-BAR 19AT10-BAR 20AT10-BAR 21AT10-BAR 22AT10-BAR 23AT10-BAR 24AT10-BAR 25AT10-BAR 26AT10-BAR 28AT10-BAR 30AT10-BAR 32AT10-BAR 34AT10-BAR 36AT10-BAR 38AT10-BAR 40AT10-BAR 42AT10-BAR 44AT10-BAR 46AT10-BAR 48AT10-BAR 52AT10-BAR 56AT10-BAR 60AT10-BAR Dimensions in mm Z Teeth 15 16 18 19 20 21 22 23 24 25 26 28 30 32 34 36 38 40 42 44 46 48 52 56 60 ØD External 45,90 49,14 55,45 58,65 61,80 65,00 68,20 71,35 74,55 77,75 80,90 87,25 93,65 100,00 106,40 112,75 119,10 125,45 131,85 138,20 144,55 150,95 163,65 176,40 189,15 +33(0)4 37 490 055 - cial2@hpceurope.com Length of teeth L D 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 HPC Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -12% -25% -33% -37% On request Price each Total length L T 1 to 5 160 46,03 F 160 51,78 F 160 63,19 F 160 68,82 F 160 71,92 F 160 84,02 F 160 91,36 F 160 95,16 F 160 104,75 F 160 104,75 F 160 117,47 F 160 130,45 F 160 154,87 F 160 178,17 F 160 197,23 F 160 220,45 F 160 252,27 F 160 264,38 F 160 264,38 F 160 264,38 F 160 336,11 F 160 379,76 F 160 379,76 F 160 379,76 F 160 609,56 F Volume 4 2013 4 65 AT-type timing pulley Aluminium 6082 PITCH AT5 Belt width 10mm Belt width 10mm - 2 nd generation metric profile - Transmits a greater torque - More precise - Pitch 5mm - Materials: Pulley: aluminium 6082 Flanges: aluminium for pulleys with AT up to 46 teeth, steel for 47 teeth or more - A  ll pulleys have flanges - Secured by a grub screw .Options. ØM - Choose from 20 to 84 teeth - For use with belt AT5/... PAT (Optional) Flange reference ØD ØE ØA H8 15 24 Hole for M4 grubscrew 15 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Dimensions in mm 66 4 Volume  4 2013 ØD (mm) 30,60 32,20 33,75 35,35 36,95 38,55 40,15 41,75 43,35 44,90 46,50 48,10 49,70 51,30 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 20 6 38,10 20XL 20 6 38,10 20XL 20 6 39,68 21XL 20 6 41,28 22XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 49,25 26XL 25 6 49,25 26XL 25 6 51,05 28XL 30 8 51,05 28XL 30 8 54,36 30XL 30 8 55,56 16L 30 8 57,15 17L Price each 1 to 5 AT PAT On request 20AT5-10 21AT5-10 22AT5-10 23AT5-10 24AT5-10 25AT5-10 26AT5-10 27AT5-10 28AT5-10 29AT5-10 30AT5-10 31AT5-10 32AT5-10 33AT5-10 PCD (mm) 31,84 33,44 34,99 36,59 38,19 39,79 41,39 42,99 44,59 46,14 47,74 49,34 50,94 52,54 On request Z Part number Teeth www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Price each 1 to 5 AT PAT On request Z PCD ØD ØM ØA ØE Flange Part number Teeth (mm) (mm) (mm) (mm) (mm) ref. 34AT5-10 34 54,14 52,90 30 8 61,91 14H 35AT5-10 35 55,69 54,45 30 8 61,91 14H 36AT5-10 36 57,29 56,05 30 8 61,91 14H 37AT5-10 37 58,89 57,65 40 8 66,68 15H 38AT5-10 38 60,49 59,25 40 8 66,68 15H 39AT5-10 39 62,09 60,85 40 8 69,85 16H 40AT5-10 40 63,69 62,41 40 8 69,85 16H 41AT5-10 41 65,24 64,00 40 8 74,61 17H 42AT5-10 42 66,84 65,60 40 8 74,61 17H 43AT5-10 43 68,44 67,20 40 8 74,61 17H 44AT5-10 44 70,04 68,80 40 8 79,38 18H 45AT5-10 45 71,64 70,40 40 8 79,38 18H 46AT5-10 46 73,24 72,00 40 8 79,38 18H 47AT5-10 47 74,79 73,55 40 8 82,55 19H 48AT5-10 48 76,39 75,15 40 8 82,55 19H 49AT5-10 49 77,99 76,75 40 8 82,55 19H 50AT5-10 50 79,59 78,35 60 10 86,73 20H 51AT5-10 51 81,19 79,95 60 10 90,49 21H 52AT5-10 52 82,79 81,55 60 10 90,49 21H 53AT5-10 53 84,39 83,15 60 10 90,49 21H 54AT5-10 54 85,94 84,70 60 10 95,25 22H 55AT5-10 55 87,54 86,30 60 10 95,25 22H 56AT5-10 56 89,14 87,90 60 10 95,25 22H 57AT5-10 57 90,74 89,50 60 10 98,43 23H 58AT5-10 58 92,34 91,10 60 10 98,43 23H 59AT5-10 59 93,94 92,70 60 10 103,19 24H 60AT5-10 60 95,49 94,25 60 10 103,19 24H 61AT5-10 61 97,09 95,85 60 10 103,19 24H 62AT5-10 62 98,69 97,45 60 10 106,36 25H 63AT5-10 63 100,29 99,05 60 10 106,36 25H 64AT5-10 64 101,89 100,65 60 10 111,13 26H 65AT5-10 65 103,49 102,25 60 10 111,13 26H 66AT5-10 66 105,04 103,80 60 10 111,13 26H 67AT5-10 67 106,64 105,40 60 10 111,13 26H 68AT5-10 68 109,84 107,00 60 10 114,30 27H 69AT5-10 69 109,84 108,60 60 10 114,30 27H 70AT5-10 70 111,44 110,20 60 10 119,06 28H 71AT5-10 71 113,04 111,80 60 10 119,06 28H 72AT5-10 72 114,59 113,35 60 10 119,06 28H 73AT5-10 73 116,19 114,95 60 10 127,00 30H 74AT5-10 74 117,79 116,55 60 10 127,00 30H 75AT5-10 75 119,39 118,15 60 10 127,00 30H 76AT5-10 76 120,99 119,75 60 10 127,00 30H 77AT5-10 77 122,59 121,35 60 10 131,76 31H 78AT5-10 78 124,19 122,95 60 10 131,76 31H 79AT5-10 79 125,74 124,50 60 10 131,76 31H 80AT5-10 80 127,34 126,10 60 10 134,94 32H 81AT5-10 81 128,94 127,70 60 10 134,94 32H 82AT5-10 82 130,54 129,30 60 10 139,70 33H 83AT5-10 83 132,14 130,90 60 10 139,70 33H Pulleys available up to this size 84AT5-10 84 133,74 132,50 60 10 139,70 33H On request Volume 4 2013 4 67 AT-type timing pulley Aluminium 6082 PITCH AT5 Belt width 16mm Belt width 16mm - 2 nd generation metric profile - Transmits a greater torque - Pitch 5mm - Materials: Pulley: Aluminium 6082 Flanges: aluminium for pulleys with up to 46 teeth, steel for 47 teeth or more - A  ll pulleys have flanges - Secured by a grub screw AT Flange reference .Options. - Choose from 20 to 84 teeth - For use with belt AT5/... ØM 21 30 PAT (Optional) ØD ØA H8 Hole for grubscrew ØE 21 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Dimensions in mm 68 4 Volume  4 2013 ØD (mm) 30,60 32,20 33,75 35,35 36,95 38,55 40,15 41,75 43,35 44,90 46,50 48,10 49,70 51,30 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 20 6 38,10 20XL 20 6 38,10 20XL 20 6 39,48 21XL 20 6 41,28 22XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 49,25 26XL 25 6 49,25 26XL 25 6 51,05 28XL 30 8 51,05 28XL 30 8 54,36 30XL 30 8 55,56 16L 30 8 57,15 17L Price each 1 to 5 AT PAT On request PCD (mm) 31,84 33,44 34,99 36,59 38,19 39,79 41,39 42,99 44,59 46,14 47,74 49,34 50,94 52,54 On request Z Part number Teeth 20AT5-16 20 21AT5-16 21 22AT5-16 22 23AT5-16 23 24AT5-16 24 25AT5-16 25 26AT5-16 26 27AT5-16 27 28AT5-16 28 29AT5-16 29 30AT5-16 30 31AT5-16 31 32AT5-16 32 33AT5-16 33 www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Price each 1 to 5 AT PAT On request Z PCD ØD ØM ØA ØE Flange Part number Teeth (mm) (mm) (mm) (mm) (mm) ref. 34AT5-16 34 54,14 52,90 30 8 61,91 14H 35AT5-16 35 55,69 54,45 30 8 61,91 14H 36AT5-16 36 57,29 56,05 30 8 61,91 14H 37AT5-16 37 58,89 57,65 40 8 66,68 15H 38AT5-16 38 60,49 59,25 40 8 66,68 15H 39AT5-16 39 62,09 60,85 40 8 69,85 16H 40AT5-16 40 63,69 62,41 40 8 69,85 16H 41AT5-16 41 65,24 64,00 40 8 74,61 17H 42AT5-16 42 66,84 65,60 40 8 74,61 17H 43AT5-16 43 68,44 67,20 40 8 74,61 17H 44AT5-16 44 70,04 68,80 40 8 79,38 18H 45AT5-16 45 71,64 70,40 40 8 79,38 18H 46AT5-16 46 73,24 72,00 40 8 79,38 18H 47AT5-16 47 74,79 73,55 40 8 82,55 19H 48AT5-16 48 76,39 75,15 40 8 82,55 19H 49AT5-16 49 77,99 76,75 40 8 82,55 19H 50AT5-16 50 79,59 78,35 60 10 85,73 20H 51AT5-16 51 81,19 79,95 60 10 90,49 21H 52AT5-16 52 82,79 81,55 60 10 90,49 21H 53AT5-16 53 84,39 83,15 60 10 90,49 21H 54AT5-16 54 85,94 84,70 60 10 95,25 22H 55AT5-16 55 87,54 86,30 60 10 95,25 22H 56AT5-16 56 89,14 87,90 60 10 95,25 22H 57AT5-16 57 90,74 89,50 60 10 98,23 23H 58AT5-16 58 92,34 91,10 60 10 98,23 23H 59AT5-16 59 93,94 92,70 60 10 103,19 24H 60AT5-16 60 95,49 94,25 60 10 103,19 24H 61AT5-16 61 97,09 95,85 60 10 103,19 24H 62AT5-16 62 98,69 97,45 60 10 106,36 25H 63AT5-16 63 100,29 99,05 60 10 106,36 25H 64AT5-16 64 101,89 100,65 60 10 111,13 26H 65AT5-16 65 103,49 102,25 60 10 111,13 26H 66AT5-16 66 105,04 103,80 60 10 111,13 26H 67AT5-16 67 106,64 105,40 60 10 111,13 26H 68AT5-16 68 108,24 107,00 60 10 114,30 27H 69AT5-16 69 109,84 108,60 60 10 114,30 27H 70AT5-16 70 111,44 110,20 60 10 119,06 28H 71AT5-16 71 113,04 111,80 60 10 119,06 28H 72AT5-16 72 114,59 113,35 60 10 119,06 28H 73AT5-16 73 116,19 114,95 60 10 127,00 30H 74AT5-16 74 117,79 116,55 60 10 127,00 30H 75AT5-16 75 119,39 118,15 60 10 127,00 30H 76AT5-16 76 120,99 119,75 60 10 127,00 30H 77AT5-16 77 122,59 121,35 60 10 131,76 31H 78AT5-16 78 124,19 122,95 60 10 131,76 31H 79AT5-16 79 125,74 124,50 60 10 131,76 31H 80AT5-16 80 127,34 126,10 60 10 134,94 32H 81AT5-16 81 128,94 127,70 60 10 134,94 32H 82AT5-16 82 130,54 129,30 60 10 139,70 33H 83AT5-16 83 132,14 130,90 60 10 139,70 33H Pulleys available up to this size 84AT5-16 84 133,74 132,50 60 10 139,70 33H on request Volume 4 2013 4 69 AT-type timing pulley Aluminium 6082 PITCH AT5 Belt width 25mm Belt width 25mm - 2 nd generation metric profile - Transmits a greater torque - Pitch 5mm - Materials: Pulley: aluminium 6082 Flanges: aluminium for pulleys with up to 46 teeth, steel for 47 teeth or more - A  ll pulleys have flanges - Secured by a grub screw AT PAT (Optional) Flange reference .Options. - Choose from 20 to 84 teeth - For use with belt AT5/... ØM ØD ØA H8 30 40 Hole for grubscrew ØE 30 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Dimensions in mm 70 4 Volume  4 2013 ØD (mm) 30,60 32,20 33,75 35,35 36,95 38,55 40,15 41,75 43,35 44,90 46,50 48,10 49,70 51,30 52,90 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 20 6 38,10 20XL 20 6 38,10 20XL 20 6 39,68 21XL 20 6 41,28 22XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 44,70 24XL 25 6 49,25 26XL 25 6 49,25 26XL 25 6 51,05 28XL 30 8 51,05 28XL 30 8 54,36 30XL 30 8 55,56 16L 30 8 57,15 17L 30 8 61,91 14H Price each 1 to 5 AT PAT On request PCD (mm) 31,84 33,44 34,99 36,59 38,19 39,79 41,39 42,99 44,59 46,14 47,74 49,34 50,94 52,54 54,14 On request Z Part number Teeth 20AT5-25 20 21AT5-25 21 22AT5-25 22 23AT5-25 23 24AT5-25 24 25AT5-25 25 26AT5-25 26 27AT5-25 27 28AT5-25 28 29AT5-25 29 30AT5-25 30 31AT5-25 31 32AT5-25 32 33AT5-25 33 34AT5-25 34 www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Price each 1 to 5 AT PAT On request Z PCD ØD ØM ØA ØE Flange Part number Teeth (mm) (mm) (mm) (mm) (mm) ref. 35AT5-25 35 55,69 54,45 30 8 61,91 14H 36AT5-25 36 57,29 56,05 30 8 61,91 14H 37AT5-25 37 58,89 57,65 40 8 66,08 15H 38AT5-25 38 60,49 59,25 40 8 66,08 15H 39AT5-25 39 62,09 60,85 40 8 69,85 16H 40AT5-25 40 63,69 62,45 40 8 69,85 16H 41AT5-25 41 65,24 64,00 40 8 74,61 17H 42AT5-25 42 66,84 65,60 40 8 74,61 17H 43AT5-25 43 68,44 67,20 40 8 74,61 17H 44AT5-25 44 70,04 68,80 40 8 79,38 18H 45AT5-25 45 71,64 70,40 40 8 79,38 18H 46AT5-25 46 73,24 72,00 40 8 79,38 18H 47AT5-25 47 74,79 73,55 40 8 82,55 19H 48AT5-25 48 76,39 75,15 40 8 82,55 19H 49AT5-25 49 77,99 76,75 40 8 82,55 19H 50AT5-25 50 79,59 78,35 60 10 85,73 20H 51AT5-25 51 81,19 79,95 60 10 90,49 21H 52AT5-25 52 82,79 81,55 60 10 90,49 21H 53AT5-25 53 84,39 83,15 60 10 90,49 21H 54AT5-25 54 85,94 84,70 60 10 95,25 22H 55AT5-25 55 87,54 86,30 60 10 95,25 22H 56AT5-25 56 89,14 87,90 60 10 95,25 22H 57AT5-25 57 90,74 89,50 60 10 98,43 23H 58AT5-25 58 92,34 91,10 60 10 98,43 23H 59AT5-25 59 93,94 92,70 60 10 103,19 24H 60AT5-25 60 95,49 94,25 60 10 103,19 24H 61AT5-25 61 97,09 95,85 60 10 103,19 24H 62AT5-25 62 98,69 97,45 60 10 106,36 25H 63AT5-25 63 100,29 99,05 60 10 106,36 25H 64AT5-25 64 101,89 100,65 60 10 111,13 26H 65AT5-25 65 103,49 102,25 60 10 111,13 26H 66AT5-25 66 105,04 103,80 60 10 111,13 26H 67AT5-25 67 106,64 105,40 60 10 111,13 26H 68AT5-25 68 108,24 107,00 60 10 114,30 27H 69AT5-25 69 109,84 108,60 60 10 114,30 27H 70AT5-25 70 111,44 110,20 60 10 119,06 28H 71AT5-25 71 113,04 111,80 60 10 119,06 28H 72AT5-25 72 114,59 113,35 60 10 119,06 28H 73AT5-25 73 116,19 114,95 60 10 127,00 30H 74AT5-25 74 117,79 116,55 60 10 127,00 30H 75AT5-25 75 119,39 118,15 60 10 127,00 30H 76AT5-25 76 120,99 119,75 60 10 127,00 30H 77AT5-25 77 122,59 121,35 60 10 131,76 31H 78AT5-25 78 124,19 122,95 60 10 131,76 31H 79AT5-25 79 125,74 124,50 60 10 131,76 31H 80AT5-25 80 127,34 126,10 60 10 134,94 32H 81AT5-25 81 128,94 127,70 60 10 134,94 32H 82AT5-25 82 130,54 129,30 60 10 139,70 33H 83AT5-25 83 132,14 130,90 60 10 139,70 33H Pulleys available up to this size 10 139,70 33H 84AT5-25 84 133,74 132,50 60 On request Volume 4 2013 4 71 AT-type timing pulley Steel PAS AT10 Belt width 25mm Belt width 25mm - 2 nd generation metric profile - Transmits a greater torque - Pitch 10mm - Materials: Pulley: steel 34C10 Flanges: steel - A  ll pulleys have flanges - Secured by a grub screw .Options. AT PAT (Optional) Flange reference - Choose from 15 to 130 teeth - For use with belt AT10/... ØM ØD ØE ØA H8 30 45 Hole for grubscrew 30 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Dimensions in mm 72 4 Volume  4 2013 ØD (mm) 45,90 49,10 52,25 55,45 58,65 61,80 65,00 68,20 71,35 74,55 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 35 10 56.56 16L 35 10 55,56 16L 40 10 61,91 14H 40 10 61,91 14H 40 10 66,68 15H 40 10 69,85 16H 40 12 74,61 17H 50 12 74,61 17H 50 12 79,38 18H 50 12 82,55 19H Price each 1 to 5 AT PAT On request PCD (mm) 47,75 50,93 54,11 57,30 60,48 63,66 66,85 70,03 73,21 76,39 On request Z number Teeth Part 15AT10-25 15 16AT10-25 16 17AT10-25 17 18AT10-25 18 19AT10-25 19 20AT10-25 20 21AT10-25 21 22AT10-25 22 23AT10-25 23 24AT10-25 24 www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Price each 1 to 5 AT PAT On request Z PCD ØD ØM ØA ØE Flange Part number Teeth (mm) (mm) (mm) (mm) (mm) ref. 25AT10-25 25 79,58 77,75 50 12 85,73 20H 26AT10-25 26 82,76 80,90 50 12 90,49 21H 27AT10-25 27 85,94 84,10 50 12 90,49 21H 28AT10-25 28 89,13 87,25 50 12 95,25 22H 29AT10-25 29 92,31 90,45 50 12 98,43 23H 30AT10-25 30 95,49 93,65 50 12 103,19 24H 31AT10-25 31 98,68 96,80 50 12 103,19 24H 32AT10-25 32 101,86 100,00 60 12 106,36 25H 33AT10-25 33 105,04 103,20 60 12 111,13 26H 34AT10-25 34 108,23 106,35 60 12 111,13 26H 35AT10-25 35 111,41 109,55 60 12 114,30 27H 36AT10-25 36 114,59 112,75 60 12 119,06 28H 37AT10-25 37 117,77 115,90 60 15 127,00 30H 38AT10-25 38 120,96 119,10 60 15 127,00 30H 39AT10-25 39 124,14 122,30 60 15 131,76 31H 40AT10-25 40 127,32 125,45 75 15 131,76 31H 41AT10-25 41 130,51 128,65 75 15 134,94 32H 42AT10-25 42 133,69 131,85 75 15 139,70 33H 43AT10-25 43 136,87 135,00 75 15 142,88 34H 44AT10-25 44 140,06 138,20 75 15 150,81 36H 45AT10-25 45 143,24 141,40 75 15 150,81 36H 46AT10-25 46 146,42 144,45 75 15 150,81 36H 47AT10-25 47 149,61 147,75 75 15 158,75 38H 48AT10-25 48 152,79 150,95 75 15 158,75 38H 49AT10-25 49 155,97 154,10 75 15 168,28 40H 50AT10-25 50 159,15 157,30 75 15 168,28 40H 51AT10-25 51 162,34 160,50 100 15 176,21 42H 52AT10-25 52 165,52 163,65 100 15 176,21 42H 53AT10-25 53 168,70 166,85 100 15 184,15 44H 54AT10-25 54 171,89 170,05 100 15 184,15 44H 55AT10-25 55 175,07 173,20 100 15 184,15 44H Pulleys available up to this size 130AT10-25 130 Dimensions : contacte us On request Volume 4 2013 4 73 AT-type timing pulley Steel PAS AT10 Belt width 32mm Belt width 32mm - 2 nd generation metric profile - Transmits a greater torque - Pitch 10mm - Materials: Pulley: steel 34C10 Flanges: steel - A  ll pulleys have flanges - Secured by a grub screw AT .Options. Flange reference PAT (Optional) - Choose from 15 to 130 teeth - For use with belt AT10/... ØM ØD ØA H8 37 52 Hole for M4 grubscrew ØE 37 discounts Dimensions in mm 74 4 Volume  4 2013 ØD (mm) 45,90 49,10 52,25 55,45 58,65 61,80 65,00 68,20 71,35 74,55 77,75 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 35 10 55,56 16L 35 10 55,56 16L 40 10 61,91 14H 40 10 61,91 14H 40 10 66,68 15H 40 10 69,85 16H 40 12 74,61 17H 50 12 74,61 17H 50 12 79,38 18H 50 12 82,55 19H 50 12 85,73 20H Price each 1 to 5 AT PAT On request PCD (mm) 47,75 50,93 54,11 57,30 60,48 63,66 66,85 70,03 73,21 76,39 79,58 On request Z Part number Teeth 15AT10-32 15 16AT10-32 16 17AT10-32 17 18AT10-32 18 19AT10-32 19 20AT10-32 20 21AT10-32 21 22AT10-32 22 23AT10-32 23 24AT10-32 24 25AT10-32 25 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Price each 1 to 5 AT PAT On request Z PCD ØD ØM ØA ØE Flange number Teeth (mm) Part (mm) (mm) (mm) (mm) ref. 26AT10-32 26 82,76 80,90 50 12 90,49 21H 27AT10-32 27 85,94 84,10 50 12 90,49 21H 28AT10-32 28 89,13 87,25 50 12 95,25 22H 29AT10-32 29 92,31 90,45 50 12 98,43 23H 30AT10-32 30 95,49 93,65 50 12 103,19 24H 31AT10-32 31 98,68 96,80 50 12 103,19 24H 32AT10-32 32 101,86 100,00 60 12 106,36 25H 33AT10-32 33 105,04 103,20 60 12 111,13 26H 34AT10-32 34 108,23 106,35 60 12 111,13 26H 35AT10-32 35 111,41 109,55 60 12 114,30 27H 36AT10-32 36 114,59 112,75 60 12 119,06 28H 37AT10-32 37 117,77 115,90 60 15 127,00 30H 38AT10-32 38 120,96 119,10 60 15 127,00 30H 39AT10-32 39 124,14 122,30 60 15 131,76 31H 40AT10-32 40 127,32 125,45 75 15 131,76 31H 41AT10-32 41 130,51 128,65 75 15 134,94 32H 42AT10-32 42 133,69 131,85 75 15 139,70 33H 43AT10-32 43 136,87 135,00 75 15 142,88 34H 44AT10-32 44 140,06 138,20 75 15 150,81 36H 45AT10-32 45 143,24 141,40 75 15 150,81 36H 46AT10-32 46 146,42 144,45 75 15 150,81 36H 47AT10-32 47 149,61 147,75 75 15 158,75 38H 48AT10-32 48 152,79 150,95 75 15 158,75 38H 49AT10-32 49 155,97 154,10 75 15 168,28 40H 50AT10-32 50 159,15 157,30 75 15 168,28 40H 51AT10-32 51 162,34 160,50 100 15 176,21 42H 52AT10-32 52 165,52 163,65 100 15 176,21 42H 53AT10-32 53 168,70 166,85 100 15 184,15 44H 54AT10-32 54 171,89 170,05 100 15 184,15 44H 55AT10-32 55 175,07 173,20 100 15 184,15 44H Pulleys available up to this size 130AT10-32 130 Dimensions : contact us On request Volume 4 2013 4 75 AT-type timing pulley Steel PAS AT10 Belt width 50mm Belt width 50mm - 2 nd generation metric profile - Transmits a greater torque - Pitch 10mm - Materials: Pulley: steel 34C10 Flanges: steel - A  ll pulleys have flanges - Secured by a grub screw .Options. AT - Choose from 15 to 130 teeth - For use with belt AT10/... Flange reference ØM PAT (Optional) ØD ØE ØA H8 56 72 Hole for grubscrew 56 discounts Dimensions in mm 76 4 Volume  4 2013 ØD (mm) 45,90 49,10 52,25 55,45 58,65 61,80 65,00 68,20 71,35 74,55 HPC ØM ØA ØE Flange (mm) (mm) (mm) ref. 35 10 55,56 16L 35 10 55,56 16L 40 10 61,91 14H 40 10 61,91 14H 40 10 66,68 15H 40 10 69,85 16H 40 12 74,61 17H 40 12 74,61 17H 50 12 79,38 18H 50 12 82,55 19H Price each 1 to 5 AT PAT On request PCD (mm) 47,75 50,93 54,11 57,30 60,48 63,66 66,85 70,03 73,21 76,39 On request Z Part number Teeth 15AT10-50 15 16AT10-50 16 17AT10-50 17 18AT10-50 18 19AT10-50 19 20AT10-50 20 21AT10-50 21 22AT10-50 22 23AT10-50 23 24AT10-50 24 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm ØM ØA ØE Flange (mm) (mm) (mm) ref. 50 12 85,73 20H 50 12 90,49 21H 50 12 90,49 21H 50 12 95,25 22H 50 12 98,43 23H 50 12 103,19 24H 50 12 103,19 24H 60 12 106,36 25H 60 12 111,13 26H 60 12 111,13 26H 60 12 114,30 27H 60 12 119,06 28H 60 15 127,00 30H 60 15 127,00 30H 60 15 131,76 31H 75 15 131,76 31H 75 15 134,94 32H 75 15 139,70 33H 75 15 142,88 34H 75 15 150,81 36H 75 15 150,81 36H 75 15 150,81 36H 75 15 158,75 38H 75 15 158,75 38H 75 15 168,28 40H 75 15 168,28 40H 100 15 176,21 42H 100 15 176,21 42H 100 15 184,15 44H 100 15 184,15 44H 100 15 184,15 44H available up to this size Dimensions : contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 AT PAT On request ØD (mm) 77,75 80,90 84,10 87,25 90,45 93,65 96,80 100,00 103,20 106,35 109,55 112,75 115,90 119,10 122,30 125,45 128,65 131,85 135,00 138,20 141,40 144,55 147,75 150,95 154,10 157,30 160,50 163,65 166,85 170,05 173,20 On request Z PCD Part number Teeth (mm) 25AT10-50 25 79,58 26AT10-50 26 82,76 27AT10-50 27 85,94 28AT10-50 28 89,13 29AT10-50 29 92,31 30AT10-50 30 95,49 31AT10-50 31 98,68 32AT10-50 32 101,86 33AT10-50 33 105,04 34AT10-50 34 108,23 35AT10-50 35 111,41 36AT10-50 36 114,59 37AT10-50 37 117,77 38AT10-50 38 120,96 39AT10-50 39 124,14 40AT10-50 40 127,32 41AT10-50 41 130,51 42AT10-50 42 133,69 43AT10-50 43 136,87 44AT10-50 44 140,06 45AT10-50 45 143,24 46AT10-50 46 146,42 47AT10-50 47 149,61 48AT10-50 48 152,79 49AT10-50 49 155,97 50AT10-50 50 159,15 51AT10-50 51 162,34 52AT10-50 52 165,52 53AT10-50 53 168,70 54AT10-50 54 171,89 55AT10-50 55 175,07 Pulleys 130AT10-50 130 on request Volume 4 2013 4 77 AT-type timing belt Steel cored polyurethane pitch AT5 SIMPLE FACE - 2 nd generation metric profile - Transmits a greater torque - Pitch 5mm - Working temp. -30°C to +80°C - Max. speed 40m/s - Output up to 98% - Oil-resistant - Low noise - Resists stretching Din 7721 5 1,5 2,7 50 o 2,5 .Info.. - W  hen ordering. add the width to the part number. E.g.: AT5/525/25 discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Part number AT5/225 AT5/255 AT5/280 AT5/300 AT5/330 AT5/340 AT5/375 AT5/390 AT5/420 AT5/450 AT5/455 AT5/500 AT5/525 AT5/545 AT5/600 AT5/610 AT5/660 AT5/710 AT5/720 AT5/750 AT5/780 AT5/825 AT5/860 AT5/975 AT5/1050 AT5/1125 AT5/1500 AT5/2000 Dimensions en mm 78 4 Length 225 255 280 300 330 340 375 390 420 450 455 500 525 545 600 610 660 710 720 750 780 825 860 975 1050 1125 1500 2000 Volume  4 2013 No. of teeth 45 51 56 60 66 68 75 78 84 90 91 100 105 109 120 122 132 142 144 150 156 165 172 195 210 225 300 400 HPC Price each 1 to 5 for widths 10mm 16mm 25mm 16,78 F 24,98 F 34,15 F 17,21 F 25,28 F 34,38 F 17,42 F 25,49 F 34,67 F 17,62 F 25,63 F 34,91 F 17,72 F 25,95 F 35,54 F 17,75 F 26,10 F 35,54 F 18,07 F 26,53 F 36,33 F 18,17 F 26,82 F 36,68 F 18,44 F 27,18 F 37,23 F 18,77 F 27,89 F 37,84 F 18,85 F 28,01 F 38,10 F 19,80 F 29,53 F 40,96 F 20,73 F 31,22 F 43,36 F 21,34 F 32,42 F 45,36 F 22,86 F 34,91 F 48,53 F 23,20 F 35,28 F 49,32 F 23,83 F 36,33 F 50,91 F 24,98 F 37,84 F 52,92 F 25,19 F 38,10 F 53,32 F 25,49 F 38,92 F 54,10 F 26,26 F 40,15 F 56,09 F 27,08 F 41,76 F 58,09 F 27,73 F 42,96 F 60,11 F 30,07 F 46,95 F 66,09 F 32,24 F 50,13 F 70,43 F 33,51 F 52,49 F 74,42 F 40,15 F 64,07 F 92,36 F 56,09 F 86,79 F 122,64 F www.hpceurope.com - +33(0)4 37 496 496 AT-type timing belt Steel cored polyurethane PITCH AT10 - 2 nd generation metric profile - Transmits a greater torque - Pitch 10mm - Working temp. -30°C to +80°C - Max. speed 40m/s - Output up to 98% - Oil-resistant - Low noise - Resists stretching 10 5 2,5 50 o 5 SIMPLE FACE .Info.. - W  hen ordering. add the width to the part number E.g.: AT5/525/25 Part number AT10/500 AT10/560 AT10/600 AT10/610 AT10/660 AT10/700 AT10/730 AT10/780 AT10/800 AT10/840 AT10/890 AT10/920 AT10/960 AT10/980 AT10/1000 AT10/1010 AT10/1050 AT10/1080 AT10/1100 AT10/1150 AT10/1200 AT10/1210 AT10/1250 AT10/1280 AT10/1300 AT10/1320 AT10/1350 AT10/1360 AT10/1400 AT10/1480 AT10/1500 AT10/1600 AT10/1700 AT10/1720 AT10/1800 AT10/1860 AT10/1940 Dimensions in mm Length 500 560 600 610 660 700 730 780 800 840 890 920 960 980 1000 1010 1050 1080 1100 1150 1200 1210 1250 1280 1300 1320 1350 1360 1400 1480 1500 1600 1700 1720 1800 1860 1940 discounts Din 7721 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request No. of teeth 50 56 60 61 60 70 73 78 80 84 89 92 96 98 100 101 105 108 110 115 120 121 125 128 130 132 135 136 140 148 150 160 170 172 180 186 194 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 for widths 25mm 32mm 50mm 51,72 F 65,26 F 95,97 F - 54,51 F 102,34 F 56,09 F 71,63 F 104,73 F 56,50 F 72,05 F 105,49 F 60,11 F 76,82 F 112,29 F 62,47 F 80,40 F 117,05 F 64,45 F 83,59 F 120,64 F 67,66 F 87,19 F 127,42 F 69,63 F 88,78 F 129,03 F 72,85 F 93,15 F 135,80 F 78,03 F 100,31 F 146,17 F 81,20 F 105,11 F 153,34 F 86,40 F 112,29 F 162,10 F 89,15 F 113,49 F 170,46 F 91,15 F 116,67 F 173,25 F 91,95 F 117,05 F 174,43 F 93,56 F 120,27 F 178,03 F 94,75 F 121,84 F 179,63 F 96,75 F 123,84 F 183,21 F 99,12 F 127,42 F 188,77 F 101,51 F 130,98 F 193,57 F 101,94 F 131,79 F 194,76 F 104,73 F 134,60 F 198,76 F 105,49 F 136,60 F 201,13 F 107,10 F 138,18 F 203,52 F 108,70 F 140,18 F 207,10 F 111,09 F 142,95 F 211,89 F 112,29 F 144,16 F 213,90 F 115,47 F 149,74 F 220,68 F 121,84 F 158,48 F 233,82 F 123,04 F 160,50 F 236,60 F 130,98 F 171,23 F 252,56 F 139,38 F 181,61 F 268,88 F 141,37 F 183,21 F 271,64 F 147,35 F 192,36 F 284,41 F 152,14 F 198,35 F 292,78 F 159,30 F 209,12 F 309,54 F Volume 4 2013 4 79 AT-type timing belt per metre Steel cored polyurethane Pitch AT5 AT10 SINGLE-SIDED Din 7721 - 2nd generation metric profile - Transmits a greater load - Pitch 5 or 10mm - For linear movements - Fixed using rigid connecting plates - Working temp. -20°C to +80°C - Max. speed 40m/s - Tolerance over length ±0.8mm/1000mm - Ouput up to 98% - Oil-resistant - Low noise - Resists stretching ar For line g in n positio .Uses. - For reciprocating movements AT5M .Accessories. - Connecting plate AT.../P .Info.. - Min. length: 1000mm - Supplied in multiples of 1 metre - When ordering. add the length (L) and the width (l) to the part number (AT5M/L/l). E.g.: AT5M/1000/16 5 1,5 2,7 50 AT10M 5 2,5 o 2,5 10 50 o 5 discounts Typical application Part number AT5M AT10M Pitch AT5 AT10 Dimensions in mm 80 4 Volume  4 2013 10mm 25,67 F - HPC Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request Price 1 to 5, per metre for widths 16mm 25mm 32mm - 30,50 F 57,16 F - 49,29 F 62,91 F 50mm - 69,90 F www.hpceurope.com - +33(0)4 37 496 496 Connecting plate for AT type timing belts For AT5M and AT10M timing belts Pitch AT5 AT10 - For linear movements - Rigid connecting plate - Pitches: 5 and 10mm - For use with AT5M and AT10M belts supplied by the metre - Material: Aluminium .Uses. - F  or closing a belt or attaching one end of a belt to a frame L A d H F B F E discounts Typical application Part number AT5/25P AT10/25P AT10/32P AT10/50P Pitch AT5 AT10 AT10 AT10 Dimensions in mm B 44 50 57 75 L 41,5 80,0 80,0 80,0 G Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -7% -14% -20% -24% On request H 8 15 15 15 E 25 50 50 50 +33(0)4 37 490 055 - cial2@hpceurope.com F 6 8 8 8 G 8,25 15,00 15,00 15,00 HPC d 5,5 9,0 9,0 9,0 A 3,25 5,00 5,00 5,00 Belt width 25 25 32 50 Price each 1 to 5 53,10 F 57,68 F 60,88 F 65,49 F Volume 4 2013 4 81 Drawing to be completed for a non standard timing pulley Flange Tapped hole Please add your dimensions to the boxes above Description of the timing pulley Pitch Number of teeth Ø PCD Outside Ø Number of flanges Quantity Material Heat Treatment Keyway Tapped hole Other HPC standard tolerances will apply (see technical pages) 82 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Drawing to be completed for a non standard chain sprocket Please add your dimensions to the boxes above Description of the chain sprocket Pitch Pitch according to which Standard Number of Teeth Ø PCD Outside Ø Quantity Material Treatment Keyway Tapped Hole Other HPC standard tolerances will apply (see technical pages) +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 83 nd a s ets n i a k Ch proc -p.99 s .86 p Sprocket p.86 Stainless steel sprocket inless sta teel s p.91 Steel chain per meter p.96 Steel chain link p.97 Stainless steel chain per metre ss stai t n e l e e l s p.98 Stainless steel chain link inless sta teel s p.99 Chain sprocket Stainless steel Pitch 4mm S AS Undercut ØP ØD ØM ØA H8 - Pitch 4mm - Roller diameter 2.5mm - Material: stainless steel (303) Z10CNF 18.09 s .Accessory. 4 4 10 t size Smalles Z Part number Teeth S 4-10 10 S 4-11 11 S 4-12 12 S 4-13 13 S 4-14 14 S 4-15 15 S 4-16 16 S 4-17 17 S 4-18 18 S 4-19 19 S 4-20 20 S 4-21 21 S 4-23 23 S 4-25 25 S 4-27 27 S 4-30 30 S 4-33 33 S 4-35 35 S 4-36 36 S 4-38 38 S 4-40 40 S 4-42 42 S 4-44 44 S 4-48 48 S 4-50 50 S 4-60 60 S 4-80 80 Dimensions in mm 86 4 ØP 12,94 14,20 15,45 16,71 17,97 19,23 20,50 21,76 23,06 24,29 25,57 26,83 29,37 31,91 34,45 38,26 42,08 44,62 45,89 48,43 50,98 53,52 56,07 61,12 63,66 76,39 101,86 Volume  4 2013 ØD 14,71 16,02 17,32 18,62 19,92 21,21 22,50 23,79 25,08 26,37 27,65 28,94 31,50 34,06 36,62 40,45 44,29 46,84 48,12 50,67 53,22 55,77 58,32 63,42 65,98 78,72 104,20 HPC s stain e le st el 2,5 2,5 - SUA-4 chain ØM 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 ØA 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Undercut Ø x width 8,00 x 2,5 8,00 x 2,5 8,00 x 2,5 9,05 x 2,5 10,33 x 2,5 11,60 x 2,5 - - - - - - - - - - - - - - - - - - - - - Price each 1 to 5 S AS 9,30 F 7,42 F 9,88 F 7,86 F 10,38 F 8,26 F 10,90 F 8,69 F 11,82 F 9,43 F 12,12 F 9,66 F 12,85 F 10,24 F 13,93 F 11,10 F 14,54 F 11,62 F 15,18 F 12,37 F 15,89 F 12,67 F 16,55 F 13,19 F 17,25 F 13,75 F 17,92 F 14,31 F 19,55 F 15,63 F 21,80 F 17,42 F 22,98 F 18,37 F 23,64 F 19,31 F 24,29 F 19,08 F 24,45 F 19,56 F 24,64 F 19,67 F 24,73 F 19,77 F 24,96 F 19,98 F 25,19 F 20,16 F 25,43 F 20,32 F 26,42 F 21,13 F 81,85 F 79,69 F www.hpceurope.com - +33(0)4 37 496 496 Chain sprocket DIN 04-1 Stainless steel Pitch S - Pitch 6mm (DIN 04-1) - Roller diameter 3.95mm - Material: stainless steel (303) Z10CNF 18.09 .Accessory. 6mm AS Undercut ØD ØM ØA H8 ØP - SUA-4 chain 4 ss stain e le st el 2,6 2,6 4 13 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Z Part number Teeth S 6-10 10 S 6-11 11 S 6-12 12 S 6-13 13 S 6-14 14 S 6-15 15 S 6-16 16 S 6-17 17 S 6-18 18 S 6-19 19 S 6-20 20 S 6-21 21 S 6-23 23 S 6-25 25 S 6-27 27 S 6-30 30 S 6-33 33 S 6-35 35 S 6-36 36 S 6-38 38 S 6-40 40 S 6-42 42 S 6-44 44 S 6-48 48 S 6-50 50 S 6-56 56 S 6-60 60 Dimensions in mm ØP 19,42 21,29 23,18 25,07 26,96 28,85 30,75 32,65 34,55 36,45 38,35 40,25 44,06 47,87 51,68 57,40 63,12 66,93 68,84 72,65 76,47 80,28 84,10 91,73 95,55 107,00 114,64 ØD 22,06 24,03 25,99 27,94 29,88 31,82 33,76 35,69 37,62 39,55 41,48 43,41 47,25 51,09 54,93 60,68 66,43 70,26 72,18 76,00 79,83 83,66 87,49 95,14 98,97 110,44 118,08 ØM 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 30 +33(0)4 37 490 055 - cial2@hpceurope.com ØA 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 HPC Undercut Ø x width 10 x 2,5 14 x 2,5 14 x 2,5 - - - - - - - - - - - - - - - - - - - - - - - - Price each 1 to 5 S AS 10,86 F 8,55 F 11,63 F 9,30 F 12,77 F 10,15 F 13,10 F 10,46 F 13,45 F 10,75 F 13,78 F 11,01 F 15,01 F 12,01 F 16,43 F 13,10 F 16,96 F 13,55 F 18,29 F 14,60 F 19,76 F 15,79 F 20,02 F 16,00 F 20,25 F 16,15 F 20,52 F 16,43 F 20,76 F 16,60 F 21,02 F 16,77 F 21,32 F 17,06 F 21,02 F 18,65 F 21,98 F 17,57 F 22,69 F 18,08 F 23,29 F 18,65 F 24,28 F 18,94 F 24,16 F 19,31 F 24,60 F 19,65 F 25,71 F 20,56 F 81,85 F 79,69 F 86,14 F 83,99 F Volume 4 2013 4 87 Chain sprocket DIN 05B-1 Steel Pitch 8mm S AS Undercut - P  itch 8mm (DIN 05B-1) - Roller diameter 5mm - Material: Steel 34C10 .Accessories. - SBR-8 or SBS-8 chains ØD ØM ØA H8 ØP 2,8 3,2 2,8 16 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Z Part number Teeth S 8-8 8 S 8-9 9 S 8-10 10 S 8-11 11 S 8-12 12 S 8-13 13 S 8-14 14 S 8-15 15 S 8-16 16 S 8-17 17 S 8-18 18 S 8-19 19 S 8-20 20 S 8-21 21 S 8-23 23 S 8-25 25 S 8-27 27 S 8-30 30 S 8-33 33 S 8-35 35 S 8-36 36 S 8-38 38 S 8-40 40 S 8-42 42 S 8-44 44 S 8-48 48 S 8-50 50 Dimensions in mm 88 4 ØP 20,90 23,39 25,89 28,40 30,90 33,42 35,95 38,48 41,00 43,53 46,07 48,61 51,14 53,67 58,75 63,82 68,91 76,53 84,16 89,24 91,78 96,87 101,96 107,05 112,14 122,31 127,40 Volume  4 2013 ØD 24,11 26,78 29,42 32,04 34,65 37,25 39,84 42,48 45,00 47,53 50,16 52,74 55,31 57,88 63,00 68,12 73,24 80,91 88,58 93,68 96,24 101,34 106,44 111,55 116,65 126,85 131,96 HPC ØM 14 14 17 18 20 20 20 28 30 30 30 30 30 30 30 35 35 40 40 40 40 40 40 40 40 40 40 ØA 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 12 Undercut Ø x width 11,37 x 3 - - - - - - - - - - - - - - - - - - - - - - - - - - Price each 1 to 5 S AS 10,09 F 8,50 F 10,29 F 8,59 F 10,75 F 8,99 F 10,73 F 8,99 F 10,73 F 8,99 F 10,86 F 9,10 F 10,93 F 9,18 F 11,11 F 9,35 F 11,37 F 9,54 F 11,69 F 9,85 F 12,11 F 10,12 F 12,43 F 10,43 F 12,81 F 10,75 F 13,55 F 11,40 F 13,86 F 11,62 F 13,90 F 12,43 F 18,75 F 15,75 F 20,17 F 16,92 F 21,64 F 18,12 F 22,07 F 18,57 F 22,92 F 19,23 F 24,17 F 20,25 F 25,71 F 21,59 F 26,30 F 22,07 F 29,07 F 24,40 F 33,93 F 28,48 F 36,57 F 30,68 F www.hpceurope.com - +33(0)4 37 496 496 Chain sprocket Pitch Steel AS S - Pitch 1/4” (6.35mm) - Roller diameter 3.30mm - Material: Steel 34C10 ØA H8 ØM ØP 1/4’’ ØD .Accessory. -  SUA-250 (Nb.25) chain 2,79 2,79 15.88 (8-30 teeth) or 19.05 (31-72 teeth) 3,18 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Part number S 25 - 8 S 25 - 9 S 25 - 10 S 25 - 11 S 25 - 12 S 25 - 13 S 25 - 14 S 25 - 15 S 25 - 16 S 25 - 17 S 25 - 18 S 25 - 19 S 25 - 20 S 25 - 21 S 25 - 25 S 25 - 28 S 25 - 30 S 25 - 35 S 25 - 36 S 25 - 40 S 25 - 42 S 25 - 44 S 25 - 48 S 25 - 50 S 25 - 54 S 25 - 60 S 25 - 72 Dimensions in mm Z Teeth 8 9 10 11 12 13 14 15 16 17 18 19 20 21 25 28 30 35 36 40 42 44 48 50 54 60 72 ØP 16,17 18,19 20,21 22,23 24,26 26,28 28,30 30,32 34,34 34,36 36,38 38,40 40,43 42,45 50,53 56,60 60,64 70,74 72,77 80,85 84,89 88,94 97,02 101,60 109,15 121,28 145,53 ØD 19,35 21,34 23,39 25,41 27,44 29,46 31,48 33,50 35,52 37,54 39,56 41,58 43,61 45,63 53,71 59,78 63,82 73,92 75,95 84,03 88,07 92,12 100,20 104,24 112,33 124,46 148,71 +33(0)4 37 490 055 - cial2@hpceurope.com ØM 13 13 16 16 20 22 25 25 25 25 25 32 32 32 32 32 38 38 38 38 45 45 45 45 45 50 50 HPC ØA 6,35 6,35 7,94 7,94 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 9,52 Price each 1 to 5 S AS 10,15 F 10,15 F 10,15 F 10,15 F 10,52 F 10,52 F 10,81 F 10,81 F 11,02 F 11,02 F 11,26 F 11,26 F 12,38 F 12,38 F 12,45 F 12,45 F 12,77 F 12,77 F 13,10 F 13,10 F 13,48 F 13,48 F 14,14 F 14,14 F 14,45 F 14,45 F 14,95 F 14,95 F 17,44 F 17,44 F 17,54 F 17,54 F 17,86 F 17,86 F 19,46 F 19,46 F 20,92 F 20,92 F 22,57 F 22,57 F 23,89 F 23,89 F 24,88 F 24,88 F 26,81 F 26,81 F 27,41 F 27,41 F 28,68 F 28,68 F 34,78 F 34,78 F 48,54 F 48,54 F Volume 4 2013 4 89 Chain sprocket DIN 06B-1 Steel PITCH 3/8" PCS - P  itch 3/8” (9.525mm) (DIN 06B-1) - Roller diameter 6.35mm - Material: Steel C43 - HPC are unable to modify these parts ØP ØM ØA ØD .Options. - A  merican pitch (ASA) on request - The prebore dimensions are given as a guide only and are subject to change -  Custom made versions available .Accessories. - SBR-375 and SBS-375 chains Part number PCS37-8 PCS37-9 PCS37-10 PCS37-12 PCS37-13 PCS37-14 PCS37-15 PCS37-16 PCS37-17 PCS37-18 PCS37-20 PCS37-21 PCS37-22 PCS37-23 PCS37-24 PCS37-25 PCS37-26 PCS37-27 PCS37-28 PCS37-29 PCS37-30 PCS37-32 PCS37-33 PCS37-34 PCS37-35 PCS37-36 PCS37-38 PCS37-40 Z Teeth 8 9 10 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 38 40 E y range DISCOUNTS Econom ØP 24,89 27,85 30,82 36,80 39,80 42,80 45,81 48,82 51,83 54,85 60,89 63,91 66,93 69,95 72,97 76,00 79,02 82,04 85,07 88,09 91,12 97,17 100,20 103,23 106,26 109,29 115,34 121,40 ØD 28,0 31,0 34,0 40,0 43,0 46,3 49,3 52,3 55,3 58,3 64,3 68,0 71,0 73,5 77,0 80,0 83,0 86,0 89,0 92,0 94,7 101,3 104,3 107,3 110,4 113,4 119,5 125,5 *Depending on availability - Dimensions in mm 90 4 5,3 Volume  4 2013 HPC ØM 15 18 20 25 28 31 34 37 40 43 46 48 50 52 54 57 60 60 60 60 60 65 65 65 65 70 70 70 40+ Qty 1+ 6+ 20+ Disc. List -12% -25% On request ØA 8 8 8 8 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 E 22 22 22 25 25 25 25 28 28 28 28 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 Stock* 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 - 4 4 4 - 4 4 - 4 - - - 4 Price each 1 to 5 1,29 F 1,38 F 1,41 F 2,24 F 2,51 F 2,81 F 2,90 F 2,56 F 3,96 F 4,45 F 4,74 F 5,28 F 5,89 F 6,25 F 6,49 F 6,76 F 7,56 F 7,70 F 7,92 F 8,31 F 8,69 F 10,24 F 10,72 F 10,75 F 11,49 F 11,97 F 12,37 F 13,16 F www.hpceurope.com - +33(0)4 37 496 496 Chain sprocket DIN 06B-1 Stainless steel Pitch 3/8" - Pitch 3/8” (9.525mm) (DIN 06B-1) - Roller diameter 6.35mm - Material: stainless steel AISI 304 -  We are unable to modify these parts .Options. ss stainle l e ste - American pitch (ASA) on request - The prebore dimensions are given as a guide only and are suject to change -  Special versions available to order .Accessories. - SBS-375 chain ØP ØM ØA ØD 5,3 DISCOUNTS E Part number PCS37-12/SS PCS37-13/SS PCS37-15/SS PCS37-16/SS PCS37-17/SS PCS37-18/SS PCS37-19/SS PCS37-20/SS PCS37-21/SS PCS37-23/SS PCS37-25/SS PCS37-30/SS Z Teeth 12 13 15 16 17 18 19 20 21 23 25 30 Dimensions in mm ØP 36,80 39,80 45,81 48,82 51,83 54,85 57,87 60,89 63,91 69,95 76,00 91,12 ØD 40,0 43,0 49,3 52,3 55,3 58,3 61,3 64,3 68,0 73,5 80,0 94,7 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request E 25 25 25 28 28 28 28 28 28 28 28 30 Price each. 1 to 5 18,76 F 26,91 F 33,79 F 35,53 F 37,84 F 39,53 F 41,15 F 42,93 F 44,50 F 49,55 F 52,75 F 64,58 F ØM 25 28 34 37 40 43 46 46 48 52 57 60 ØA 8 10 10 10 10 10 10 10 12 12 12 12 HPC Volume 4 2013 4 91 Chain sprocket DIN 08B-1 Steel PITCH 1/2" - P  itch 1/2” (12.7mm) (DIN 08B-1) - Roller diameter 8.51mm - Material: Steel C43 -  HPC are unable to modify these parts .Options. PCS ØP .Accessories. - S  BR-500 and SBS-500 chains Part number PCS50-8 PCS50-9 PCS50-10 PCS50-12 PCS50-15 PCS50-16 PCS50-18 PCS50-20 PCS50-21 PCS50-22 PCS50-23 PCS50-24 PCS50-25 PCS50-26 PCS50-27 PCS50-28 PCS50-29 PCS50-30 PCS50-31 PCS50-32 PCS50-33 PCS50-34 PCS50-35 PCS50-36 PCS50-37 PCS50-38 PCS50-39 PCS50-40 nge nomy ra 7,2 ØD E DISCOUNTS Eco Z Teeth 8 9 10 12 15 16 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ØP 33,18 37,13 41,10 49,07 61,09 65,10 73,14 81,19 85,22 89,24 93,27 97,29 101,33 105,36 109,40 113,42 117,46 121,50 125,54 129,56 133,60 137,64 141,68 145,72 149,76 153,80 157,83 161,87 ØD 37,2 41,0 45,2 53,0 65,5 69,5 77,8 85,8 89,7 93,8 98,2 101,8 105,8 110,0 114,0 118,0 122,0 126,1 130,2 134,3 138,4 142,6 146,7 151,0 154,6 158,6 162,7 166,8 *Depending on availability - Dimensions in mm 92 4 ØM ØA - A  merican pitch (ASA) on request - The prebore dimensions are given as a guide only and are sujebct to change -  Custom made versions available Volume  4 2013 HPC 40+ Qty 1+ 6+ 20+ Disc. List -12% -25% On request ØM 20 24 26 33 45 50 56 64 68 70 70 70 70 70 70 70 80 80 90 90 90 90 90 90 90 90 90 90 ØA 10 10 10 10 10 12 12 12 14 14 14 14 14 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 E 25 25 25 28 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 Stock* 4 4 4 4 4 4 4 4 4 4 - 4 4 4 4 4 4 4 - 4 - - 4 4 - 4 - 4 Price each 1 to 5 1,59 F 2,24 F 2,90 F 3,96 F 5,37 F 5,70 F 6,99 F 9,44 F 9,95 F 10,24 F 10,75 F 10,94 F 11,57 F 12,29 F 12,46 F 12,79 F 14,58 F 16,12 F 17,14 F 17,35 F 17,87 F 19,57 F 20,11 F 22,26 F 22,95 F 23,15 F 24,25 F 24,75 F www.hpceurope.com - +33(0)4 37 496 496 Chain sprocket DIN 08B-1 Stainless steel Pitch 1/2” - Pitch 1/2” (12.7mm) (DIN 08B-1) - Roller diameter 8.51mm - Material: stainless steel AISI 304 -  We are unable to modify these parts .Options. - A  merican pitch (ASA) on request - The prebore dimensions are given as a guide only and are suject to change -  Special versions available to order .Accessories. - SBS-500 chain ss stainle l e ste ØP ØM ØA ØD DISCOUNTS 7,2 Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request E Part number PCS50-12/SS PCS50-13/SS PCS50-15/SS PCS50-16/SS PCS50-17/SS PCS50-18/SS PCS50-19/SS PCS50-20/SS PCS50-21/SS PCS50-23/SS PCS50-25/SS PCS50-30/SS Z Teeth 12 13 15 16 17 18 19 20 21 23 25 30 Dimensions in mm ØP 49,07 53,06 61,09 65,10 69,11 73,14 77,16 81,19 85,22 93,27 101,33 121,50 ØD 53,0 57,4 65,5 69,5 73,6 77,8 81,7 85,8 89,7 98,2 105,8 126,1 +33(0)4 37 490 055 - cial2@hpceurope.com E 28 28 28 28 28 28 28 28 28 28 28 30 Price each. 1 to 5 36,31 F 39,53 F 44,50 F 47,81 F 51,03 F 54,53 F 59,05 F 62,52 F 66,06 F 69,04 F 72,55 F 107,13 F ØM 33 37 45 50 52 56 60 64 68 70 70 80 ØA 10 10 10 12 12 12 12 12 14 14 14 16 HPC Volume 4 2013 4 93 Chain sprocket DIN 10B-1 Steel PITCH 5/8” PCS - P  itch 5/8” (15.875 mm) (DIN 10B-1) - Roller diameter 10.16mm - Material: Steel C43 -  We are unable to modify these parts ØP ØM ØA ØD .Options. - A  merican pitch (ASA) on request - The prebore dimensions are given as a guide only and are subject to change -  Custom made versions available .Accessories. - SBR-625 and SBS-265 chains E y range Econom Z Part number Teeth ØP ØD PCS62-8 8 41,48 47,0 PCS62-9 9 46,42 52,6 PCS62-10 10 51,37 57,5 PCS62-13 13 66,32 73,0 PCS62-15 15 76,36 83,0 PCS62-16 16 81,37 88,0 PCS62-17 17 86,39 93,0 PCS62-18 18 91,42 98,3 PCS62-20 20 101,49 108,4 PCS62-21 21 106,52 113,4 PCS62-22 22 111,55 118,0 PCS62-23 23 116,58 123,4 PCS62-24 24 121,62 128,3 PCS62-25 25 126,66 134,0 PCS62-26 26 131,70 139,0 PCS62-27 27 136,75 144,0 PCS62-28 28 141,78 148,7 PCS62-29 29 146,83 153,8 PCS62-30 30 151,87 158,8 PCS62-31 31 156,92 163,9 PCS62-32 32 161,95 168,9 PCS62-33 33 167,00 174,5 PCS62-34 34 172,05 179,0 PCS62-35 35 177,10 184,1 PCS62-38 38 192,24 199,2 PCS62-39 39 197,29 204,2 PCS62-40 40 202,34 209,3 *Depending on availability - Dimensions in mm 94 4 9,1 Volume  4 2013 HPC ØM 25 30 35 47 57 60 60 70 75 75 80 80 80 80 85 85 90 90 90 95 95 95 95 95 100 100 100 DISCOUNTS 40+ Qty 1+ 6+ 20+ Disc. List -12% -25% On request ØA 10 10 10 12 12 14 14 14 14 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 E 25 25 25 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 35 Stock* 4 - 4 4 4 4 4 4 4 4 - - - - - - - - 4 - - - - - - - 4 Price each 1 to 5 2,56 F 3,51 F 3,51 F 6,49 F 8,02 F 8,95 F 9,62 F 10,75 F 12,46 F 13,43 F 14,70 F 15,42 F 16,12 F 16,73 F 19,99 F 21,65 F 22,65 F 23,98 F 24,68 F 26,62 F 27,61 F 28,73 F 29,63 F 30,69 F 34,90 F 36,27 F 37,45 F www.hpceurope.com - +33(0)4 37 496 496 Chain sprocket DIN 10B-1 Stainless steel - Pitch 5/8” (15.875mm) (DIN 10B-1) - Roller diameter 10.16mm - Material: strainless steel AISI 304 -  We are unable to modify these parts Pitch 5/8” .Options. - A  merican pitch(ASA)  on request - The prebore dimensions are given as a guide only and are suject to change -  Special versions available to order ss stainle l e e t s .Accessories. - SBS-625 chain ØP ØM ØA ØD 9,1 DISCOUNTS E Part number PCS62-12/SS PCS62-13/SS PCS62-15/SS PCS62-16/SS PCS62-17/SS PCS62-18/SS PCS62-19/SS PCS62-20/SS PCS62-21/SS PCS62-23/SS PCS62-25/SS PCS62-30/SS Z Teeth 12 13 15 16 17 18 19 20 21 23 25 30 Dimensions in mm ØP 61,34 66,32 76,36 81,37 86,39 91,42 96,45 101,49 106,52 116,58 126,66 151,87 ØD 68,0 73,0 83,0 88,0 93,0 98,3 103,3 108,4 113,4 123,4 134,0 158,8 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request E 30 30 30 30 30 30 30 30 30 30 30 35 Price each. 1 to 5 38,52 F 53,01 F 57,52 F 61,06 F 67,56 F 72,55 F 77,54 F 82,07 F 90,57 F 98,61 F 105,08 F 152,18 F ØM 42 47 57 60 60 70 70 75 75 80 80 90 ØA 12 12 12 14 14 14 14 14 16 16 16 20 HPC Volume 4 2013 4 95 Single chain supplied by the metre Steel Pitch 4.0 mm to 19.05 mm - DIN 8187 (European Standard) - ISO 606 - Compatible with standard HPC sprockets - Supplied in multiples of either 1 or 5 metre lengths depending on part .Accessories. - TRE arm and PTR sprocket idler - Roll-Ring® RLR idler .Option. - A  merican pitch (ASA) available on request P P P P P P H F B S ØD discounts Part number SUA-4 SUA-6/M SUA-250/M SBR-8/M SBR-375/M SBR-500/M SBR-625/M SBR-750/M DIN - 04-1 - 05B-1 06B-1 08B-1 10B-1 12B-1 Pitch P B (mm) (mm) 4,00 2,70 6,00 2,80 6,35 3,30 8,00 3,00 9,53 5,72 12,70 7,75 15,88 9,65 19,05 11,68 Roller ØD F (mm) (mm) 2,50 6,8 4,00 7,8 3,30 8,0 5,00 8,9 6,35 14,1 8,51 18,2 10,16 20,9 12,07 24,2 *Depending on availability - Dimensions in mm 96 4 Volume  4 2013 HPC No. metres 1+ 10+ 25+ 45+ Discounts List -5% -10% On request H (mm) 4,1 5,0 6,0 7,1 8,2 11,8 14,7 16,0 Breaking Sold in Price per S strength multiples Stock* metre (mm) (N) of - 1800 1 metre 4 157,12 F 0,60 3000 5 metres 4 10,75 F - 4000 5 metres 4 13,18 F 0,80 5000 5 metres 4 8,94 F 1,30 9000 5 metres 4 6,90 F 1,60 18000 5 metres 4 6,66 F 1,70 22400 5 metres 4 8,30 F 1,85 29000 5 metres 4 10,67 F www.hpceurope.com - +33(0)4 37 496 496 Chain link Pitch Steel 4.0 mm to 19.05 mm - Connecting link: e.g.: SUA-4/L Offset link: from pitch of 9,52mm, e.g.: SBR-375/LC - Not sold individually, please contact us for details .Accessories. - Compatible with SUA and SBR chains Connecting link Offset link discounts Part number Connecting Offset link link SUA-4/L - SUA-6/L - SUA-250/L - SBR-375/L - SBR-500/L SBR-375/LC SBR-625/L SBR-500/LC SBR-750/L SBR-625/LC SBR-8/L SBR-750/LC DIN - 04-1 - 05B-1 06B-1 08B-1 10B-1 12B-1 Pitch P (mm) 4,00 6,00 6,35 8,00 9,53 12,70 15,88 19,05 *Depending on availability - Dimensions in mm For chain SUA-4 SUA-6 SUA-250 SBR-8 SBR-375 SBR-500 SBR-625 SBR-750 +33(0)4 37 490 055 - cial2@hpceurope.com Stock* Connecting link 4 4 4 4 4 4 4 4 HPC Qty. 1+ 10+ 25+ 45+ Disc. List -5% -10% On request Stock* Price each 1 to 9 Offset Connecting Offset link link link - - - - 4 4 4 4 9,23 F 0,80 F 0,92 F 0,66 F 0,93 F 0,66 F 0,99 F 0,80 F Volume 4 2013 - - - - 1,27 F 1,27 F 1,54 F 1,97 F 4 97 Single chain supplied by the metre Stainless steel Pitch 9.52 mm to 19.05 mm - DIN 8187 (European Standard) - ISO 606 - Compatible with standard HPC sprockets - Supplied in multiples of 5 metres s s Stainle steel .Accessories. - TPX arm and XZK idler - Roll-Ring® RLR idler P P P P P P H F B S ØD discounts Part number DIN SBS-375/M 06B-1 SBS-500/M 08B-1 SBS-625/M 10B-1 SBS-750/M 12B-1 Pitch P (mm) 9,52 12,70 15,88 19,05 B (mm) 5,72 7,75 9,65 11,68 Roller ØD (mm) 6,35 8,51 10,16 12,07 F (mm) 14,0 18,7 21,1 24,5 *Depending on availability - Dimensions in mm 98 4 Volume  4 2013 HPC H (mm) 8,3 11,8 14,7 16,1 Breaking S strength (mm) (N) 1,25 6200 1,65 12000 1,70 14500 1,85 18500 No. metres 1+ 50+ Discounts List On request Price Sold in multiples Stock* per metre of 5 mètres 4 28,69 F 5 mètres 4 33,10 F 5 mètres 4 45,36 F 5 mètres - 52,96 F www.hpceurope.com - +33(0)4 37 496 496 Chain link Pitch Stainless steel 9.52 mm to 19.05 mm - Connecting link: e.g. SBS-375/L Offset link: e.g. SBS-375/LC - Not sold individually, please contact us for details .Accessorie. - C  ompatible with SBS stainless steel chains ss Stainle l e e t s s s Stainle teel s Offset link Connecting link discounts Qty. 1+ 50+ Disc. List On request Part number Connecting Offset link link SBS-375/L SBS-375/LC SBS-500/L SBS-500/LC SBS-625/L SBS-625/LC SBS-750/L SBS-750/LC DIN 06B-1 08B-1 10B-1 12B-1 Pitch P (mm) 9,52 12,70 15,88 19,05 *Depending on availability - Dimensions in mm Stock* For Connecting chain link SBS-375 4 SBS-500 4 SBS-625 4 SBS-750 - +33(0)4 37 490 055 - cial2@hpceurope.com HPC Stock* Price each 1 to 9 Offset link 4 4 4 - Connecting link 1,65 F 2,26 F 2,19 F 1,89 F Volume 4 2013 Offset link 2,38 F 2,62 F 2,79 F 3,72 F 4 99 elt b nd ers a in sion .112 a Ch ten 2-p 0 p.1 Belt tension rollers New p.102 Fixe tensioner plate p.104 Roll-Ring® self- adjusting chain tensioner Idler chain sprocket p.108 p.106 Universal tension arm p.110 Stainless steel universal tension arm s Stainl e e l s ste New p.111 Belt tensioner For standard applications GTC - B  elt tensioner for use with BTE tender arm or fixed TMR and TFR tensioners - Bearing incorporated - Greased for life - Materials : Nut, screw and spacer : Galvanised steel Roller : Polyamide - Max working temp : 70°C ! NEW ØD ØM A B C e Good pric ratio quality/ Typical application : used with GTC tender arm Typical application : used with TFR tensioner Part number A B C ØD ØM GTC-2 GTC-3/4 GTC-5 GTC-6 GTC-7 35 45 60 90 135 3,0 6,0 7,5 9,0 7,0 51 67 89 127 169 30 40 60 80 90 M8 M10 M12 M20 M20 *Depending on avaibility - Dimensions in mm 102 4 Volume  4 2013 HPC Max speed (rpm) 8000 8000 6000 5000 4500 DISCOUNTS Qty 1+ 10+ 25+ 50+ Disc. List -5% -10% On request Weight (kg) 0,08 0,17 0,40 1,20 1,70 Arm ref Stock* BTE2 BTE3-BTE4 BTE5 BTE6-BTE7 BTE7 4 4 4 - - Price each 1 to 9 23,04 F 27,13 F 48,53 F 82,50 F 162,72 F www.hpceurope.com - +33(0)4 37 496 496 Belt tensioner Corrosion resistant GTCss - Belt tensioner - Sealing caps not fitted - Bearings incorporated - Max working temp : 70°C - Materials : Nut, screw and spacer : Galvanised steel Roller : Polyamide ! NEW E B C ØD ØM e For hostil ents m n o ir v n e A DISCOUNTS Qty 1+ 10+ 25+ 50+ Disc. List -5% -10% On request Max Price Arm speed each Part number A B C ØD E ØM ref (rpm) Stock* 1 to 9 GTC-2/SS 38 35 GTC-3/4/SS 51 45 GTC-5/SS 67,5 60 3 6 7,5 30 40 60 13 16 21,5 *Depending on avaibility - Dimensions in mm M8 M10 M12 +33(0)4 37 490 055 - cial2@hpceurope.com BTE2 BTE3-BTE4 BTE5 HPC 8000 8000 6000 4 4 - 30,48 F 42,05 F 85,86 F Volume 4 2013 4 103 Rigid manual tensioner Ideal for belts TMR - S  uitable for mounting and positioning GTC belt rollers and PTR sprockets - Material: Plated XC38 steel 304L stainless steel 52 46 M6 ØF 12 Typical application using GTC belt roller 6 22 M8 65 42 20 11 11 Ø12,5 11 Typical application using PTR sprocket 8,5 8,5 15 15 11 DISCOUNTS Qty 1+ 10+ 25+ 50+ Disc. List -5% -10% On request Part number TMR-8 TMR-10 TMR-8/SS TMR-10/SS Matière Steel Steel Stainless steel Stainless steel *Depending on avaibility - Dimensions in mm 104 4 Volume  4 2013 HPC ØF M8 M10 M8 M10 Stock* 4 4 - - Price each 1 to 9 21,64 F 21,64 F 27,86 F 27,86 F www.hpceurope.com - +33(0)4 37 496 496 Rigid manual tensioner Ideal for belts TFR - Suitable for mounting and positioning GTC belt rollers and PTR sprockets in a variety of positions - Material: E Plated XC38 steel ØM 304L stainless steel M5 - *Anti-rotation system A Typical application using GTC belt roller B ØM A C R L B L R B ØD ØD Typical application using PTR sprocket A A G F DISCOUNTS Qty 1+ 10+ 25+ 50+ Disc. List -5% -10% On request TFR125 and TFR150 TFR83 Part number A B Steel version TFR83-8 28 27,5 TFR83-10 28 27,5 TFR125-8 28 27,5 TFR125-10 28 27,5 TFR125-12 28 27,5 TFR150-10 33,5 33,5 TFR150-12 33,5 33,5 TFR150-16 33,5 33,5 Stainless version TFR83-8/SS 28 27,5 TFR83-10/SS 28 27,5 TFR125-8/SS 28 27,5 TFR125-10/SS 28 27,5 TFR125-12/SS 28 27,5 TFR150-10/SS 33,5 33,5 TFR150-12/SS 33,5 33,5 TFR150-16/SS 33,5 33,5 F G J J Price each R Stock* 1 to 9 C ØD E F G J L ØM - - 14 14 14 16 16 16 8,5 8,5 10,5 10,5 10,5 12,5 12,5 12,5 8 8 8 8 8 8 8 8 10 10 10 10 10 15 15 15 24 24 24 24 24 29 29 29 30 30 30 30 30 35 35 35 83,5 83,5 125 125 125 150 150 150 M8 M10 M8 M10 M12 M10 M12 M16 10,5 10,5 10,5 10,5 10,5 12,5 12,5 12,5 4 4 4 4 4 4 4 - 12,31 F 12,68 F 13,18 F 13,68 F 14,43 F 20,65 F 21,15 F 21,89 F - - 14 14 14 16 16 16 8,5 8,5 10,5 10,5 10,5 12,5 12,5 12,5 8 8 8 8 8 8 8 8 10 10 10 10 10 15 15 15 24 24 24 24 24 29 29 29 30 30 30 30 30 35 35 35 83,5 83,5 125 125 125 150 150 150 M8 M10 M8 M10 M12 M10 M12 M16 10,5 10,5 10,5 10,5 10,5 12,5 12,5 12,5 - - - - - - - - 19,41 F 20,15 F 24,38 F 25,13 F 26,87 F 37,57 F 38,07 F 39,32 F *Depending on avaibility - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 105 Roll-Ring® chain tensioner Self-adjusting RLR - Easily installed - Uses the space between two drive sprockets - Self positioning - Dampens vibration - Self lubricating - Working temperature: -20°C to +70°C - Normal resistance to UV radiation - Material: polymer .Use. - M  ultiple tensioners can be used in series on long chains or in parallel on multiple chains - On triple chains, tensioners are only needed on inner and outer strands s .Advantages. - W  orks equally as well on vertically or diagonally mounted chains - Does not require fixing or special installation di Very easy to use do A discounts Qty. 1+ 6+ 21+ Disc. List -5% On request No. of Part number teeth RLR05-030 30 RLR06-030 30 RLR06-036 36 RLR08-026 26 RLR08-030 30 RLR08-034 34 RLR10-026 26 RLR10-030 30 RLR10-034 34 RLR12-026 26 RLR12-030 30 Ref. ISO 05B 06B 06B 08B 08B 08B 10B 10B 10B 12B 12B Pitch (mm) 8,00 9,52 9,52 12,70 12,70 12,70 15,88 15,88 15,88 19,05 19,05 do 76,5 91,1 109,0 102,1 121,5 137,5 128,4 148,0 170,0 155,0 182,2 Static force Max. Price Internal Max. of max. chain each diameter deviation expansion speed di S A (N) (m/s) Stock* 1 to 5 65,0 20 104,0 2,9 5,0 - 97,81 F 73,0 25 122,0 15,2 5,2 4 84,76 F 89,5 25 143,0 28,5 5,2 4 95,95 F 84,5 24 135,8 15,7 7,5 4 78,87 F 98,0 28 161,6 22,0 8,6 4 91,04 F 114,4 30 165,0 22,0 8,8 4 103,18 F 105,0 28 153,0 28,2 4,2 4 96,16 F 124,6 33 177,0 23,0 8,8 - 110,63 F 141,0 38 217,0 45,1 8,8 - 125,58 F 127,6 35 209,5 39,2 5,4 - 116,25 F 145,0 40 241,7 65,0 6,2 - 134,23 F *Depending on availability - Dimensions in mm 106 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 .Installation. Roll-Ring® chain tensioners do not require any maintenance and can be installed on practically all chain drive systems. Their installation takes virtually no time and is inexpensive. The only conditions that must be met to be able to use them are: - The gap between the chain strands must be sufficiently large. - The distance between the chain sprockets must be sufficiently large. We recommend that you position the tensioner between two chain strands so that there is at least the equivalent of one chain pitch between the Roll-Ring® and the smallest sprocket. The Roll-Ring® can also be mounted in an alternative but efficient manner to that previously described, simply verify that the pre-load is sufficiently high. We do however; recommend that you carry out tests if this is done. Roll-Ring® chain tensioners can be used in series on the same chain strand. They can also be used in parallel on each strand of a multiple strand chain. For example, a triple strand chain requires two Roll-Ring® tensioners on the outside strands. 1 2 3 .Advantages. Typical Roll-Ring© applications Reduced installation time Reduced noise Vibrations on a non tensioned chain No additional machining required Easy installation Maintenance free The Roll-Ring© tensions and dampens the chain +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 107 Idler chain sprocket For normal applications PTR - Chain sprocket for use with the BTE universal tension arm - With ball bearings - Greased for life - M  aterial: nut, screw, and sprocket in bichromate steel - Max speed: 70 rpm - of use: -30°C to +80°C ce Good pri ratio quality/ .Accessories. - BTE tension arm S G K G A E Ring B Ø Ext Ø Prim ØD ØdM ØdM ØD F F C S B A L Part number Pitch No. of teeth Z S PTR-04B1 6,000 PTR-06B1 9,525 PTR-08B1 12,700 PTR-10B1 15,800 PTR-12B1 19,050 15 17 17 16 14 2,6 5,3 7,2 9,1 11,1 Part number Pitch No. of teeth Z Single chain Double chain S S discounts Qty. 1+ 10+ 30+ 100+ Disc. List -5% -10% On request Ring ØdM ØD A B C E F M6 M10 M12 M12 M12 7 12 15 15 15 15 22 26 26 26 4 7 9 9 9 6 10 12 12 12 6 10 12 12 12 ØD A B ØdM 6 12 17 17 17 G F L Price Arm each size Stock* 1 to 9 28 BTE2 4 22,97 F 44 BTE3 4 14,60 F 53 BTE4/BTE5 4 16,12 F 53 BTE4/BTE5 4 20,91 F 53 BTE4/BTE5 4 24,02 F L Price Arm each size Stock* 1 to 9 PTR-06B2 9,525 17 PTR-08B2 12,700 17 PTR-10B2 15,800 16 PTR-12B2 19,050 14 M12 M18 M20 M20 12 17 17 17 12 15 15 15 35 45 45 45 10,24 12 13,92 18,5 16,59 20 19,46 20 35 44 46 49 BTE4 BTE5 BTE6 BTE6 - - - - 35,48 F 41,73 F 60,52 F 68,86 F PTR-06B3 9,525 PTR-08B3 12,700 PTR-10B3 15,800 M12 M18 M20 12 17 17 12 15 15 35 45 45 10,24 12 13,92 18,5 16,59 20 45 58 64 BTE4 BTE5 BTE6 - - - 48,01 F 62,61 F 89,74 F Triple chain 17 17 16 *Depending on availability - Dimensions in mm 108 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Idler chain sprocket For hostile environments ptr ss s steel - I  dler chain sprocket for use with BTE/SS universal tension arm - Fitted with sealed stainless steel bearings - Max speed : 70 rpm - Material :Axle and gear : Stainless steel 304L Nuts : Stainless steel A2 stainles L .Accessories. L B B - BTE/SS tension arm ØM ØE ØM ØP e For hostil ents environm A A W EW! W N DISCOUNTS Qty 1+ Disc. Lis of teeth Part number Pitch Z W ØM A B L ØP ØE Simple 10+ 25+ 50+ -5% -10% On request Price Size each of arm 1 to 9 PTR-06B1/SS 9,525 PTR-08B1/SS 12,700 PTR-10B1/SS 15,800 PTR-12B1/SS 19,050 15 15 15 15 5,3 7,2 9,1 11,1 M10 M10 M12 M12 9 9 12 12 - - - - 55 55 80 80 45,81 61,09 76,36 91,63 49,3 BTE3/BTE4 35,58 F 65,5 BTE4 43,79 F 83,0 BTE5 56,24 F 99,8 BTE5 83,61 F PTR-06B2/SS 9,525 PTR-08B2/SS 12,700 PTR-10B2/SS 15,800 PTR-12B2/SS 19,050 15 15 15 15 5,3 7,2 9,1 11,1 M10 M10 M12 M12 9 9 12 12 10,24 13,92 16,59 19,46 55 60 80 80 45,81 61,09 76,36 91,63 49,3 65,5 83,0 99,8 BTE4 BTE4 BTE5 BTE5 65,45 F 81,87 F 105,77 F 161,01 F PTR-06B3/SS 9,525 PTR-08B3/SS 12,700 PTR-10B3/SS 15,800 PTR-10B3/SS 19,050 15 15 15 15 5,3 7,2 9,1 11,1 M10 M12 M12 M20 9 9 12 15 10,24 13,92 16,59 19,46 60 80 80 120 45,81 61,09 76,36 91,63 49,3 65,5 83,0 99,8 BTE4 BTE5 BTE5 BTE6 79,50 F 114,10 F 144,84 F 144,84 F Double Triple Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 109 Universal tension arm For common applications BTE - U  niversal tension arm for use with PTR tension sprockets - Angle of rotation +/- 32° - Can be installation in any position - Working temperature range: -42° to80°C - Materiel: Body: steel (except BTE6 and BTE7 which are cast iron) Arm: steel C ØD J New design ØD 32º 32º A2 A1 H K G E F B DISCOUNTS 50+ Qty 1+ 10+ 25+ Disc. List -5% -10% On request Tightening Force (N) Price torque Weight each Part number A1 A2 B C ØD E F G H J K ØM (Nm) A1 A2 (kg) Stock* 1 to 9 BTE2-M6 80 60 52 20 8,5 38 8 16 90,0 5 7 M6 10 0-90 0-110 0,200 4 23,84 F BTE3-M8 100 80 63 25 10,5 48 8,5 21 122,5 5 10 M8 25 0-140 0,170 0,360 4 30,21 F BTE4-M10 100 80 78 30 10,5 59 8,5 25 115,0 6 12 M10 49 0-320 0-430 0,590 4 36,55 F BTE5-M12 130 100 108 50 12,5 76 10,5 32 155,0 8 15 M12 86 0-820 0,1050 1,640 4 66,74 F BTE6-M16 175 140 140 60 20,5 92 12,5 41 205,0 10 17 M16 210 0-1500 0-1880 3,330 - 114,41 F BTE7-M20 220 175 198 70 20,5 112 12,5 51 255,0 12 18 M20 410 0-2500 0-3200 6,220 - 162,06 F 0-32° *Depending on avaibility - Dimensions in mm 110 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Universal stainless steel arm for tensioner For hostile environments bte ss - Universal tensioner arm for applications in hostile environments - Angle of rotation +/- 32° - Can be mounted in any position - Used with PTR/SS chain tensioners - Working temp range -42 to +50°C - Materials : Body stainless steel XSC N18-10 Arm : stainless steel 304L Screw : stainless steel A2 C e For hostil ts n e m n o ir env J ØD 32º 32º A2 A1 H K ØM G F E B DISCOUNTS 50+ Qty 1+ 10+ 25+ Disc. Price -5% -10% On request Tightening Force (N) force Weight Price each Part number A1 A2 B C ØD E F G H J K ØM (Nm) A1 A2 (kg) 1 to 9 BTE2-M6/SS 80 60 52 20 8,5 38 8 16 90,0 5 7 M6 10 0-90 0-110 0,210 44,49 F BTE3-M8/SS 100 80 63 25 10,5 48 8,5 21 112,5 5 10 M8 24 0-140 0,170 0,380 57,19 F BTE4-M10/SS 100 80 78 30 10,5 59 8,5 25 115,0 6 12 M10 48 0-320 0-430 0,620 88,97 F BTE5-M12/SS 130 100 108 50 12,5 76 10,5 34 155,0 8 15 M12 82 0-820 0-1050 1,700 158,90 F BTE6-M16/SS 175 140 140 60 20,5 92 12,5 41 205,0 10 17 M16 199 0-1500 0-1880 3,420 238,34 F 0-32° Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 111 Timing belt lenght Each belt has a fixed length, therefore when designing your system include a mechanism for altering the distance between the pulleys so that the belt can be tensioned correctly. Please see our ranges of belt idlers (TRE, TPX, MIX or AH) and rollers (RE or XRP). Please feel free to contact us if you need assistance when dimensioning your system. B ß = Contact angle D1 = Pitch diameter of large pulley D2 = Pitch diameter of small pulley a = Axle distance BC = Length of unattached belt CD = Length of contact with small pulley AB = Length of contact with large pulley L = Total belt length EF = Elevation EF D1 ß D2 ß D A a D2 EF = D1 - D2 2 SIN ß = EF a BC = EF TAN ß D1 AB = π x D1 [(2 x ß) + 180] 360 CD = π x D2 (90 - ß) 180 L = D 1 + D 2 + (2 x a) 0,6366 L = (2 x BC) + AB + CD No. of = teeth a If the difference in the number of teeth for the two pulleys is not greater than 5, the belt length can be calculated as shown; L p 112 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 24/48h delivery* for articles in stock www.hpceurope.com - +33(0)4 37 496 496 *Contact us for full details rs a ge .135 l ve p Be 116- p. Budget range ECO bevel gear (1:1 à 4:1) p.116 Steel bevel gear p.122 Stainless steel bevel gear Stain stee l l ess p.128 Moulded plastic bevel gear p.130 Machined plastic bevel gear p.133 Steel bevel gear RAtio 1:1 - - - - Steel C43  odule 1.5 to 5 M Pressure angle: 20° Material: steel C43 A pair requires 2 gears discounts Teeth Part number Z mod B1.5-16/ECO 16 B1.5-20/ECO 20 1,5 B1.5-25/ECO 25 B1.5-30/ECO 30 B2-16/ECO 16 B2-20/ECO 20 2 B2-25/ECO 25 B2-30/ECO 30 B2.5-16/ECO 16 B2.5-20/ECO 20 2,5 B2.5-25/ECO 25 B2.5-30/ECO 30 B3-16/ECO 16 B3-20/ECO 20 3 B3-25/ECO 25 B3-30/ECO 30 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request ØD p 24,0 30,0 37,0 45,0 32,0 40,0 50,0 60,0 40,0 50,0 62,5 75,0 48,0 60,0 75,0 90,0 ØD e 26,12 32,12 39,62 47,12 34,83 42,83 52,82 62,83 43,53 53,53 66,00 78,53 52,25 64,24 79,24 94,24 F 6,0 10,0 10,0 12,0 8,0 12,0 14,0 16,0 10,0 12,0 15,0 18,0 12,0 18,0 20,0 22,0 *Depending of avaibility - Dimensions in mm 116 4 Volume  4 2013 HPC L 18,9 20,0 23,0 25,0 23,5 25,0 28,0 30,0 28,1 30,5 33,5 35,5 31,7 35,0 38,0 40,0 ØD m 20,3 22,0 28,0 30,0 25,3 32,0 40,0 50,0 30,3 40,0 50,0 55,0 40,3 45,0 55,0 60,0 ØA V 8 7,10 10 7,40 10 11,09 12 13,35 8 9,50 10 10,78 12 14,28 12 17,78 12 11,90 12 15,43 15 19,48 15 23,63 12 14,30 15 16,00 15 22,00 20 28,00 S - 2,0 2,0 2,5 - 3,0 3,0 3,0 - 3,5 3,5 3,5 - 4,0 4,0 4,0 Price each Lm Stock* 1 to 5 12,0 4 15,06 F 8,5 4 18,20 F 12,0 - 21,70 F 12,0 - 26,24 F 14,0 4 17,81 F 12,0 4 22,16 F 12,3 4 35,45 F 12,8 4 42,64 F 15,0 4 27,06 F 16,0 - 35,45 F 16,0 - 43,18 F 16,0 - 50,97 F 18,0 - 31,69 F 13,6 - 39,37 F 16,0 - 47,52 F 17,0 - 57,44 F www.hpceurope.com - +33(0)4 37 496 496 F ØDm ØDp ØA V ØDe S L Lm discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Teeth Part number Z mod ØD p ØD e B3.5-16/ECO 16 56,0 60,95 B3.5-20/ECO 20 70,0 74,95 3,5 B3.5-25/ECO 25 87,5 92,45 B3.5-30/ECO 30 105,0 109,95 B4-16/ECO 16 64,0 69,65 B4-20/ECO 20 80,0 85,65 4 B4-25/ECO 25 100,0 105,65 B4-30/ECO 30 120,0 125,65 B4.5-16/ECO 16 72,0 78,38 B4.5-20/ECO 20 90,0 96,38 4,5 B4.5-25/ECO 25 112,5 118,80 B4.5-30/ECO 30 135,0 141,38 B5-16/ECO 16 80,0 87,07 B5-20/ECO 20 100,0 107,07 5 B5-25/ECO 25 125,0 132,07 B5-30/ECO 30 150,0 157,07 Dimensions in mm F 14,0 22,0 26,0 30,0 15,0 25,0 28,0 32,0 17,5 28,0 32,0 35,0 18,0 30,0 34,0 38,0 L ØD m 36,4 45,3 40,5 55,0 43,5 65,0 48,0 70,0 44,3 50,3 43,0 60,0 45,0 70,0 48,0 80,0 46,3 55,3 48,0 65,0 50,0 75,0 53,0 90,0 48,9 60,3 50,5 70,0 53,5 90,0 56,5 110,0 +33(0)4 37 490 055 - cial2@hpceurope.com ØA 16 15 20 20 16 18 20 20 20 20 20 20 20 20 20 20 HPC V 16,60 18,13 23,97 30,02 19,70 20,74 28,50 35,67 21,70 23,41 31,76 40,82 25,10 26,86 36,36 45,97 S - 4,5 4,5 4,5 - 5,0 5,0 5,0 - 6,0 6,0 6,0 - 6,5 6,5 6,17 Lm 20,0 17,0 18,0 19,0 25,0 18,0 18,0 16,0 25,0 18,0 18,0 17,0 25,0 18,5 18,0 18,0 Price each 1 to 5 35,41 F 43,13 F 60,51 F 70,57 F 41,53 F 51,65 F 65,24 F 84,34 F 45,93 F 73,16 F 88,92 F 107,81 F 50,08 F 75,17 F 96,73 F 121,58 F Volume 4 2013 4 117 Steel bevel gear RAtio 2:1 - - - - Steel C43  odule 1.5 to 5 M Pressure angle: 20° Material: steel C43 A pair requires 2 gears ØDp ØDm ØA F ØDe V S Lm L discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Teeth Part number Z DB1.5-16/ECO 16 DB1.5-32/ECO 32 DB2-16/ECO 16 DB2-32/ECO 32 DB2.5-16/ECO 16 DB2.5-32/ECO 32 DB3-16/ECO 16 DB3-32/ECO 32 DB3.5-16/ECO 16 DB3.5-32/ECO 32 DB4-16/ECO 16 DB4-32/ECO 32 DB4.5-16/ECO 16 DB4.5-32/ECO 32 DB5-16/ECO 16 DB5-32/ECO 32 mod ØD p 24 1,5 48 32 2 64 40 2,5 80 48 3 96 56 3,5 112 64 4 128 72 4,5 144 80 5 160 ØD e 26,68 49,34 35,57 65,78 44,47 82,23 53,36 98,68 62,26 115,12 71,15 131,57 80,05 148,00 88,94 164,46 F 8 8 10 10 12 12 15 15 18 18 20 20 22 22 25 25 *Depending of avaibility - Dimensions in mm 118 4 Volume  4 2013 HPC L 19,5 20,0 23,0 25,0 27,5 25,0 28,0 30,0 33,5 31,0 36,0 32,0 39,5 36,0 50,0 38,0 ØD m 21 32 26 40 34 50 40 60 48 70 50 80 60 90 60 100 ØA 10 12 10 12 12 15 15 15 15 20 15 20 20 20 20 20 V 16,33 7,45 22,41 10,21 28,38 12,97 33,64 15,31 38,83 17,77 44,81 20,42 51,00 23,21 56,06 25,52 S 1,5 3,0 2,0 4,0 2,5 5,0 3,0 6,0 3,5 7,0 4,0 80, 4,5 9,0 5,0 10,0 Price each Lm Stock* 1 to 5 11,3 4 15,66 F 10,0 4 24,86 F 11,9 4 19,85 F 10,0 4 45,61 F 14,4 - 27,92 F 10,0 - 51,19 F 11,6 - 34,24 F 10,0 - 64,58 F 14,4 - 37,53 F 10,0 - 76,45 F 13,4 - 46,82 F 10,0 - 80,41 F 15,4 - 51,04 F 10,0 - 105,90 F 55,72 F 21,1 - 10,0 - 127,46 F www.hpceurope.com - +33(0)4 37 496 496 Steel C43 - - - - Steel bevel gear RAtio 3:1  odule 1.5 to 5 M Pressure angle: 20° Material: steel C43 A pair requires 2 gears ØDm ØA ØDp F ØDe V S Lm L discounts Teeth Part number Z mod ØD p ØD F e TB1.5-16/ECO 16 24 26,82 12 1,5 TB1.5-48/ECO 48 72 72,95 12 TB2-16/ECO 16 32 35,80 15 2 TB2-48/ECO 48 96 97,26 15 TB2.5-16/ECO 16 40 44,74 18 2,5 TB2.5-48/ECO 48 120 121,58 18 TB3-16/ECO 16 48 53,69 18 3 TB3-48/ECO 48 144 145,90 18 TB3.5-16/ECO 16 56 62,64 22 3,5 TB3.5-48/ECO 48 168 170,21 22 TB4-16/ECO 16 64 71,59 25 4 TB4-48/ECO 48 192 194,53 25 TB4.5-16/ECO 16 72 80,53 28 4,5 TB4.5-48/ECO 48 216 218,84 28 TB5-16/ECO 16 80 89,48 35 5 TB5-48/ECO 48 240 243,16 35 Dimensions in mm Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request L ØD m ØA V 24,0 20 10 24,42 20,0 50 12 7,27 28,5 26 12 33,26 23,0 60 15 9,90 32,0 32 12 42,41 26,0 70 20 12,60 32,0 40 15 54,25 29,0 80 20 16,20 38,0 48 15 62,29 31,0 90 20 18,48 41,5 55 20 71,23 33,0 100 20 21,20 53,0 60 20 80,27 49,0 100 20 23,93 60,0 60 20 85,61 50,0 150 20 25,45 +33(0)4 37 490 055 - cial2@hpceurope.com HPC S 1,0 3,0 1,5 4,0 1,5 5,0 2,0 6,0 2,5 7,0 3,0 8,0 3,0 9,0 3,0 10,0 Lm 11,7 10,0 12,4 10,0 13,0 10,0 12,1 10,0 15,0 10,0 15,2 10,0 23,4 18,0 22,5 20,0 Price each 1 to 5 17,42 F 53,63 F 20,63 F 67,28 F 31,07 F 78,46 F 34,98 F 94,79 F 44,47 F 125,50 F 50,08 F 209,18 F 57,40 F 379,16 F 62,85 F 451,05 F Volume 4 2013 4 119 Steel bevel gear RAtio 4:1 - - - - Steel C43  odule 1.5 to 5 M Pressure angle: 20° Material: steel C43 A pair requires 2 gears ØDm ØA ØDp F ØDe V S Lm L discounts Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Teeth Part number Z mod ØD p FB1.5-16/ECO 16 24 1,5 FB1.5-64/ECO 64 96 FB2-16/ECO 16 32 2 FB2-64/ECO 64 128 FB2.5-16/ECO 16 40 2,5 FB2.5-64/ECO 64 160 FB3-16/ECO 16 48 3 FB3-64/ECO 64 192 FB3.5-16/ECO 16 56 3,5 FB3.5-64/ECO 64 224 FB4-16/ECO 16 64 4 FB4-64/ECO 64 256 FB4.5-16/ECO 16 72 4,5 FB4.5-64/ECO 64 288 FB5-16/ECO 16 80 5 FB5-64/ECO 64 320 Dimensions in mm ØD e F L 26,91 12 25,0 96,73 12 22,0 35,88 15 24,0 128,97 15 24,0 44,85 18 30,5 161,21 18 29,0 53,82 22 34,0 193,45 22 30,0 62,80 25 45,0 225,70 25 50,0 71,76 30 50,0 257,94 30 50,0 80,73 32 53,0 290,18 32 53,0 89,70 35 58,0 322,42 35 58,0 120 4 Volume  4 2013 HPC ØD m ØA V 18 10 36,02 70 15 8,53 25 12 49,07 80 20 11,79 30 12 61,99 90 20 13,77 40 15 74,05 100 20 16,41 48 15 87,13 100 20 19,32 50 20 98,21 120 20 21,72 55 20 112,08 130 20 24,83 60 20 125,06 150 20 27,65 S Lm 1,0 12,2 3,0 10,0 1,0 8,2 4,0 10,0 1,5 11,7 5,0 10,0 2,0 11,0 6,0 10,0 2,0 19,1 7,0 22,0 2,0 18,5 8,0 20,0 2,5 19,0 9,0 23,0 2,5 20,6 10,0 25,0 Price each 1 to 5 17,07 F 75,17 F 21,07 F 101,93 F 32,16 F 121,58 F 39,26 F 235,36 F 45,72 F 360,85 F 53,63 F 439,29 F 59,25 F 683,81 F 67,28 F 847,25 F www.hpceurope.com - +33(0)4 37 496 496 Technical support ces For all your questions and requests for quotation To ler an ) ul d a ( orm F Advi = mz ce www.hpceurope.com - +33(0)4 37 496 496 Steel bevel gear Ratio Steel 60C40 1:1 - - - - - E F  odule 0.8 to 2.5 M Pressure angle 20° Teeth Gleason Material: Steel 60C40 Two gears are required to make a pair G Tapped hole ØR T ØA ØM 45° 45° H Centre drill ØP ØD N.B. Torque ratings can be doubled by heat treatment TORQUE AND POWER INDICATION Torque (Nm) Power (kW) 2.5 MOD 4.30 0.455 For 20 teeth 2.0 1.5 MOD MOD 2.20 0.94 0.231 0.097 Teeth Part number Z MOD ØP B0.8-16 16 12,80 B0.8-20 20 16,00 0,8 B0.8-25 25 20,00 B0.8-30 30 24,00 B1-20 20 20,00 B1-25 25 1,0 25,00 B1-30 30 30,00 B1.25-20 20 25,00 B1.25-25 25 1,25 31,25 B1.25-30 30 37,50 B1.5-20 20 30,00 B1.5-25 25 1,5 37,50 B1.5-30 30 45,00 B2-20 20 40,00 B2-25 25 2,0 50,00 B2-30 30 60,00 B2.5-16 16 40,00 B2.5-20 20 2,5 50,00 B2.5-25 25 62,50 E 20 20 20 20 25 25 25 23 28 36 35 35 35 42 42 42 50 50 50 at 1000 1.25 MOD 0.71 0.08 ØD 13,93 17,13 21,13 25,13 21,41 26,41 31,41 26,70 33,00 39,30 32,12 39,62 47,12 43,00 52,83 63,00 43,50 54,00 66,00 ØA 6 6 6 6 8 8 8 8 8 10 10 10 10 12 12 12 15 15 15 *Depending on availability - Dimensions in mm 122 4 Volume  4 2013 HPC rpm 1.0 MOD 0.57 0.03 ØM 10 13 16 20 18 22 26 22 25 30 26 32 38 34 40 50 35 40 55 0.8 MOD 0.14 0.015 F 16,00 14,76 13,35 11,96 18,45 16,68 14,95 15,27 17,87 23,47 25,17 22,57 19,92 29,00 25,52 21,87 36,80 33,50 30,50 G 12,2 10,5 8,0 6,0 14,0 10,8 8,0 9,0 9,2 13,5 18,0 13,5 9,0 19,0 12,0 7,0 27,5 20,0 15,0 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request H 3,00 3,40 4,24 5,09 4,24 5,28 6,35 6,00 7,00 8,00 6,35 8,00 9,50 8,50 10,60 12,70 8,00 10,60 15,00 Screw R M3 M3 M3 M3 M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 M5 M5 Price each T Stock* 1 to 5 7 4 23,57 F 6 4 24,65 F 5 - 25,57 F 4 - 27,64 F 8 4 28,15 F 6 4 30,04 F 5 4 32,03 F 3 4 29,56 F 3 4 33,28 F 5 - 33,53 F 10 4 30,50 F 7 - 35,42 F 5 4 37,56 F 10 4 35,72 F 7 4 39,87 F 4 4 44,74 F 15 4 36,52 F 12 4 45,51 F 8 4 51,73 F www.hpceurope.com - +33(0)4 37 496 496 Steel bevel gear RATIO Steel 60C40 E - Module 3 to 6 - Pressure angle 20° - Teeth Gleason - Material: Steel 60C40 - Two gears are required to make a pair F G 1:1 Tapped hole ØR T ØA ØM 45° H 45° Centre drill ØP ØD N.B. Torque ratings can be doubled by heat treatment For 20 teeth at 1000 rpm TORQUE AND POWER 3.0 4.0 5.0 6.0 INDICATION MOD MOD MOD MOD Torque (Nm) 6.00 8.83 16 25 Power (kW) 0.63 0.93 1.7 2.6 Teeth MOD ØP E ØD Part number Z B3-16 16 48 44,0 52,24 B3-19 19 57 49,0 61,24 3 B3-26 26 78 65,0 82,24 B3-30 30 90 68,5 94,24 B4-16 16 64 55,5 69,66 B4-19 19 76 65,0 81,66 4 B4-26 26 104 82,0 109,66 B4-30 30 120 90,0 125,66 B5-16 16 80 70,0 87,10 B5-20 20 100 80,0 107,10 5 B5-25 25 125 100,0 132,10 B5-30 30 150 114,0 157,10 B6-16 16 96 80,0 104,52 B6-20 20 120 90,0 128,52 6 B6-25 25 150 115,0 158,52 B6-30 30 180 130,0 188,52 Dimensions in mm ØA 15 16 18 20 15 18 22 25 18 20 25 30 25 30 35 35 discounts ØM 40,0 50,0 64,0 76,0 50,0 62,5 85,0 102,0 60,0 80,0 80,0 100,0 75,0 96,0 100,0 120,0 +33(0)4 37 490 055 - cial2@hpceurope.com F 29,08 31,01 40,03 39,65 35,81 41,43 48,69 51,51 46,13 49,04 59,47 65,87 50,10 52,32 67,29 72,24 HPC G 16,00 17,02 19,03 16,51 16,49 20,24 20,50 21,00 20,00 21,50 24,00 26,00 22,00 18,50 24,00 28,00 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Screw Price each H R T 1 to 5 11 M5 8 61,37 F 13 M5 9 77,84 F 18 M6 10 104,39 F 21 M6 8 112,89 F 15 M5 8 87,78 F 18 M6 10 109,47 F 24 M6 10 123,88 F 28 M8 11 135,17 F 20 M8 11 142,24 F 24 M8 12 151,19 F 28 M10 14 160,06 F 35 M10 15 168,29 F 22 M10 12 174,72 F 28 M10 12 182,73 F 35 M10 14 190,86 F 42 M10 16 202,78 F Volume 4 2013 4 123 Steel bevel gear Ratio Steel 60C40 2:1 - - - - -  odule 0.8 to 6 M Pressure angle 20° Teeth Gleason Material: Steel 60C40 Two gears are required to make a pair E H F ØM ØP ØD G T Tapped hole ØR Trou taraudé Centre de drill repère "R" ØA Point N.B. Torque ratings can be doubled by heat treatment TORQUE AND POWER INDICATION 6 MOD Torque (Nm) 51.00 Power (kW) 5.35 5 MOD 32.00 3.35 4 MOD 16.40 1.72 For 20 3 MOD 7.70 0.81 teeth at 2.5 MOD 4.30 0.455 1000 rpm 2 1.5 MOD MOD 2.20 0.94 0.231 0.097 1.25 MOD 0.71 0.08 1 MOD 0.57 0.03 0.8 MOD 0.14 0.015 discounts 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request Teeth Z DB0.8-15 15 DB0.8-30 30 DB1-15 15 DB1-30 30 DB1.5-15 15 DB1.5-30 30 DB2-15 15 DB2-30 30 DB2.5-15 15 DB2.5-30 30 DB3-15 15 DB3-30 30 DB4-15 15 DB4-30 30 DB5-15 15 DB5-30 30 DB6-15 15 DB6-30 30 Part number Price Mod ØP E 0,8 12,00 20,0 24,00 14,0 1,0 15,00 24,0 30,00 18,0 1,5 22,50 35,0 45,00 27,0 2,0 30,00 45,0 60,00 35,0 37,50 54,0 2,5 75,00 41,5 45,00 65,0 3,0 90,00 50,0 60,00 85,0 4,0 120,00 67,0 75,00 100,0 5,0 150,00 75,0 90,00 115,0 6,0 180,00 86,0 ØD 13,93 24,64 17,42 30,58 26,12 45,87 34,83 61,16 43,54 76,45 52,25 91,74 69,67 122,32 87,09 152,90 104,51 183,48 ØA 6 8 8 10 10 10 12 12 15 15 18 20 20 25 20 30 25 35 *Depending on availability - Dimensions in mm 124 4 Volume  4 2013 HPC ØM 10 20 14 25 21 30 28 40 32 50 36 55 48 70 60 100 75 120 F 11,90 10,08 13,87 13,11 19,84 19,66 24,76 25,21 29,51 29,31 36,26 36,08 46,11 48,16 51,81 51,66 57,52 58,15 G 7,50 5,50 8,76 7,00 12,13 11,00 14,86 14,00 16,51 13,31 18,00 18,00 22,01 25,00 21,00 22,00 21,00 24,00 H 4,02 4,02 5,03 5,03 7,55 7,55 10,06 10,06 13,53 13,53 17,00 17,00 22,00 22,00 28,00 28,00 34,00 34,00 ØR M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M6 M6 M6 M8 M8 M10 M10 M10 each T Stock* 1 to 5 3,5 4 25,26 F 3,5 4 29,79 F 4,0 4 28,64 F 4,0 4 35,19 F 5,0 4 31,21 F 5,0 4 39,98 F 7,5 4 34,54 F 8,0 4 47,91 F 8,0 4 47,24 F 7,0 4 59,67 F 12,0 - 63,70 F 12,0 - 117,42 F 15,0 - 90,96 F 15,0 - 137,85 F 15,0 - 132,74 F 15,0 - 192,05 F 15,0 - 183,37 F 15,0 - 222,52 F www.hpceurope.com - +33(0)4 37 496 496 Steel bevel gear RAtio Steel 60C40 3:1 - Module 0.8 to 6 - Pressure angle 20° - Teeth Gleason - Material: Steel 60C40 - Two gears are required to make a pair E H F ØM ØP ØD G T Centre de drill repère Tapped taraudé hole ØR "R" ØA Point Trou N.B. Torque ratings can be doubled by heat treatment TORQUE AND POWER 6 INDICATION MOD Torque (Nm) 51.00 Power (kW) 5.35 5 MOD 32.00 3.35 4 MOD 16.40 1.72 For 20 3 MOD 7.70 0.81 teeth at 2.5 MOD 4.30 0.455 1000 rpm 2 1.5 MOD MOD 2.20 0.94 0.231 0.097 1.25 MOD 0.71 0.08 1 MOD 0.57 0.03 0.8 MOD 0.14 0.015 discounts Dimensions in mm ØP E ØD ØA 12,0 28 14,14 6 36,0 20 36,30 8 15,0 32 17,67 8 45,0 24 45,37 10 22,5 45 26,51 10 67,5 32 68,06 15 30,0 62 35,37 12 90,0 42 90,74 18 37,5 75 44,21 18 112,5 50 113,43 20 45,0 88 53,05 18 135,0 58 136,11 23 60,0 115 70,74 20 180,0 75 181,48 30 75,0 138 88,42 20 225,0 86 226,85 35 90,0 160 106,11 25 270,0 95 272,22 40 ØM 10 28 13 40 18 50 24 48 30 55 36 65 48 85 60 120 72 140 +33(0)4 37 490 055 - cial2@hpceurope.com F 15,63 16,07 16,54 19,09 21,80 24,63 31,77 32,39 36,52 37,77 42,20 43,45 54,55 55,77 64,75 62,68 69,31 66,17 HPC G 9,67 8,00 9,18 10,00 10,51 12,00 16,00 18,00 18,00 22,00 19,00 24,00 23,00 30,00 23,00 28,00 22,00 28,00 H 5,69 5,69 7,12 7,12 10,67 10,67 15,00 15,00 18,00 18,00 22,00 22,00 30,00 30,00 40,00 40,00 45,00 45,00 ØR M3 M3 M4 M4 M4 M4 M5 M5 M6 M6 M6 M6 M8 M8 M8 M10 M10 M10 T 5,0 4,0 4,5 5,0 5,0 6,0 10,0 10,0 12,0 12,0 12,0 12,0 15,0 15,0 15,0 15,0 15,0 15,0 Price each 1 to 5 22,35 F 33,67 F 24,31 F 36,04 F 24,93 F 40,90 F On request Teeth Mod Part number Z TB0.8-15 15 0,8 TB0.8-45 45 TB1-15 15 1,0 TB1-45 45 TB1.5-15 15 1,5 TB1.5-45 45 TB2-15 15 2,0 TB2-45 45 TB2.5-15 15 2,5 TB2.5-45 45 TB3-15 15 TB3-45 45 3,0 TB4-15 15 TB4-45 45 4,0 TB5-15 15 TB5-45 45 5,0 TB6-15 15 TB6-45 45 6,0 Qty. 1+ 6+ 20+ 40+ 60+ 100+ Disc. List -5% -10% -15% -20% On request Volume 4 2013 4 125 Steel bevel gear RAtio Steel 60C40 4:1 - Module 0.8 to 6 - Pressure angle 20° - Teeth Gleason - Material: Steel 60C40 - Two gears are required to make a pair E H ØM ØP ØD F G T Centre de drill repère hole "R" ØR ØA Point Trou Tapped taraudé N.B. Torque ratings can be doubled by heat treatment TORQUE AND POWER INDICATION 6 MOD Torque (Nm) 51.00 Power (kW) 5.35 5 MOD 32.00 3.35 4 MOD 16.40 1.72 For 20 3 MOD 7.70 0.81 teeth at 2.5 MOD 4.30 0.455 1000 rpm 2 1.5 MOD MOD 2.20 0.94 0.231 0.097 1.25 MOD 0.71 0.08 1 MOD 0.57 0.03 0.8 MOD 0.14 0.015 discounts Dimensions in mm ØP 12,0 48,0 15,0 60,0 22,5 90,0 30,0 120,0 37,5 150,0 45,0 180,0 60,0 240,0 75,0 300,0 90,0 360,0 E 35,0 20,0 45,0 30,0 60,0 35,0 76,1 45,0 94,0 55,0 112,0 65,0 146,0 82,0 175,0 90,0 205,0 96,0 126 4 Volume  4 2013 ØD 14,23 48,22 17,79 60,27 26,69 90,41 35,57 120,55 44,46 150,69 53,55 180,82 71,14 241,10 88,92 301,37 106,70 361,64 HPC ØA 6 8 8 10 10 15 12 18 15 20 18 25 20 30 20 35 25 40 ØM 10 30 13 40 18 50 24 60 30 75 36 90 48 120 60 160 75 180 F 18,07 15,98 24,22 25,08 28,82 27,61 33,05 34,81 39,95 42,20 47,90 49,83 59,90 61,61 64,98 64,00 70,12 64,16 G 10,58 8,00 14,73 12,00 12,08 12,00 15,36 19,00 17,00 23,00 21,00 27,00 25,00 35,00 23,00 28,00 23,00 28,00 H 7,10 7,10 9,28 9,28 13,91 13,91 17,00 17,00 21,00 21,00 26,00 26,00 34,00 34,00 40,00 40,00 45,00 45,00 ØR M3 M3 M4 M4 M4 M4 M5 M5 M6 M6 M6 M6 M8 M8 M8 M10 M10 M10 T 5 4 7 6 6 6 10 10 12 12 12 12 15 15 15 15 15 15 Price each 1 to 5 23,87 F 36,27 F 26,69 F 38,72 F 27,90 F 43,18 F On request Teeth Mod Part number Z FB0.8-15 15 0,8 FB0.8-60 60 FB1-15 15 1,0 FB1-60 60 FB1.5-15 15 1,5 FB1.5-60 60 FB2-15 15 2,0 FB2-60 60 FB2.5-15 15 2,5 FB2.5-60 60 FB3-15 15 3,0 FB3-60 60 FB4-15 15 4,0 FB4-60 60 FB5-15 15 5,0 FB5-60 60 FB6-15 15 FB6-60 60 6,0 40+ Qty. 1+ 6+ 20+ Disc. List -5% -10% On request www.hpceurope.com - +33(0)4 37 496 496 bevel gears PRINCIPLE Bevel gears are used to change the direction of transfer in a power transfer system. Unlike straight spur gears, bevel gears with the same module are not interchangeable, a pinion can only be used with the wheel for which it was designed and manufactured ASSEMBLY When assembling a pair of gears, the two cones should be mated together. As this can can result in axial and result offset, it may be necessary to use stops, bearings or housings. USES Pairs of bevel gears are often used to transmit power or movement through 90°. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 127 Stainless steel bevel gear Stainless steel 304L RAtio 1:1 - Module 0.8 to 2.5 - Pressure angle 20° - Teeth Gleason - Material: stainless steel 304L - Two gears must be ordered to make a pair E G Trou Tapped taraudé hole T "R" ØR s steel stainles ØA ØM 45° 45° H F Point de repère Centre Drill ØP ØD TORQUE AND POWER 2.5 INDICATION MOD Torque (Nm) 4.30 Power (kW) 0.455 Teeth Part number Z Module SSB0.8-16 16 SSB0.8-25 25 0,8 SSB0.8-30 30 SSB1-20 20 1 SSB1-30 30 SSB1.25-20 20 1,25 SSB1.25-30 30 SSB1.5-20 20 1,5 SSB1.5-30 30 SSB2-20 20 2 SSB2-30 30 SSB2.5-16 16 2,5 SSB2.5-25 25 Dimensions in mm For 20 teeth 2.0 1.5 MOD MOD 2.20 0.94 0.231 0.097 ØP 12,80 20,00 24,00 20,00 30,00 25,00 37,50 30,00 45,00 40,00 60,00 40,00 62,50 128 4 Volume  4 2013 E 20 20 20 25 25 23 36 35 35 42 42 50 50 at 1000 rpm 1.25 1.0 0.8 MOD MOD MOD 0.71 0.57 0.14 0.08 0.03 0.015 ØD ØA 13,93 6 21,13 6 25,13 6 21,41 8 31,41 8 26,70 8 39,30 10 32,12 10 47,12 10 43,00 12 63,00 12 43,50 15 66,00 15 HPC ØM 10 16 20 18 26 22 30 26 38 34 50 35 55 F 16,00 13,35 11,96 18,45 14,95 15,27 23,47 25,17 19,92 29,00 21,87 36,80 30,50 discounts Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request G 12,21 8,00 6,00 14,00 8,00 9,00 13,50 18,00 9,00 19,00 7,00 27,50 15,00 H 3,00 4,24 5,09 4,24 6,35 6,00 8,00 6,35 9,50 8,50 12,70 8,00 15,00 Price each ØR T 1 to 5 M3 7,00 39,74 F M3 5,00 43,13 F M3 4,00 46,62 F M4 8,00 47,47 F M4 5,00 53,97 F M4 3,50 49,87 F M4 5,00 56,50 F M4 10,00 51,48 F M4 5,00 63,35 F M5 10,00 60,22 F M5 4,00 75,44 F M5 15,00 61,57 F M5 8,00 87,36 F www.hpceurope.com - +33(0)4 37 496 496 Stainless steel bevel gear Stainless steel 304L RAtio 2:1 3:1 4:1 - Module 0.8 to 2.5 - Teeth Gleason - Material: stainless steel 304L - Pressure angle 20° E H G T s steel stainles repère Centre de drill Trou taraudé "R" ØA Point Tapped hole For 20 teeth at 1000 rpm TORQUE AND POWER 2.5 2.0 1.5 1.25 1.0 0.8 INDICATION MOD MOD MOD MOD MOD MOD Torque (Nm) 4.30 2.20 0.94 0.71 0.57 0.14 Power (kW) 0.455 0.231 0.097 0.08 0.03 0.015 Part number SSDB0.8-15 SSDB0.8-30 SSDB1-15 SSDB1-30 SSDB1.5-15 SSDB1.5-30 SSDB2-15 SSDB2-30 SSDB2.5-15 SSDB2.5-30 SSTB0,8-15 SSTB0.8-45 SSTB1-15 SSTB1-45 SSTB1.5-15 SSTB1.5-45 SSFB0.8-15 SSFB0.8-60 SSFB1-15 SSFB1-60 SSFB1,5-15 SSFB1,5-60 Teeth Z Module ØP 15 12,00 0,8 30 24,00 15,00 15 1 30,00 30 15 22,50 1,5 30 45,00 30,00 15 2 60,00 30 15 37,50 2,5 30 75,00 15 12,00 0,8 36,00 45 15,00 15 1 45,00 45 22,50 15 1,5 67,50 45 12,00 15 0,8 48,00 60 15,00 15 1 60,00 60 22,50 15 1,5 60,00 60 2:1 3:1 4:1 Dimensions in mm E 20,00 14,00 24,00 18,00 35,00 27,00 45,00 35,00 54,00 41,50 28,00 20,00 32,00 24,00 45,00 32,00 35,00 20,00 45,00 30,00 60,00 35,00 ØD 13,93 24,64 17,42 30,58 26,12 45,87 34,83 61,16 43,54 76,45 14,14 36,30 17,67 45,37 26,51 68,06 14,23 48,22 17,79 60,27 26,69 90,41 ØA 6 8 8 10 10 10 12 12 15 15 6 8 8 10 10 15 6 8 8 10 10 15 ØM 10 20 14 25 21 30 28 40 32 30 10 28 13 40 18 50 10 30 13 40 18 50 +33(0)4 37 490 055 - cial2@hpceurope.com F 11,90 10,08 13,87 13,11 19,84 19,66 24,76 25,21 29,51 29,31 15,63 16,07 16,54 19,09 21,80 24,63 18,07 15,98 24,22 25,08 28,82 27,61 discounts Qty. 1+ 6+ 20+ 40+ Disc. List -12% -25% On request G 7,50 5,50 8,76 7,00 12,13 11,00 14,86 14,00 16,51 13,31 9,67 8,00 9,18 10,00 10,51 12,00 10,58 8,00 14,73 12,00 12,08 12,00 HPC H 4,02 4,02 5,03 5,03 7,55 7,55 10,06 10,06 13,53 13,53 5,69 5,69 7,12 7,12 10,67 10,67 7,10 7,10 9,28 9,28 13,91 13,91 Screw R M3 M3 M4 M4 M4 M4 M5 M5 M5 M5 M3 M3 M4 M4 M4 M4 M3 M3 M4 M4 M4 M4 T 3,50 3,50 4,00 4,00 5,00 5,00 7,50 8,00 8,00 7,00 5,00 4,00 4,50 5,00 5,00 6,00 5,00 4,00 7,00 6,00 6,00 6,00 Price each 1 to 5 41,75 F 49,23 F 47,35 F 58,22 F 51,54 F 66,17 F 57,14 F 79,21 F 78,06 F 108,44 F On request F ØM ØP ØD Volume 4 2013 4 129 Moulded plastic bevel gear Nylon 6 moulded RAtio 1:1 e-bored ØA: Pr ust be m hole d finishe - Module 1 to 3.5 - Moulded parts - Material: Nylon 6 reinforced with 30% glass fibre .Options. - HPC are unable to modify these parts Please refer to the ZDB.. or ZTB.. ranges for parts that can be modified Lm B dm .Info.. - T  wo identical gears must be ordered to make a pair ØDp ØA F ange L y r Econom ØDn ØDe discounts Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request Part number MEB1-16 MEB1.5-16 MEB1.5-20 MEB1.5-30 MEB2-16 MEB2-20 MEB2-30 MEB2.5-16 MEB2.5-20 MEB2.5-30 MEB3-16 MEB3-20 MEB3-30 MEB3.5-20 Teeth Z Module ØDe 16 1,0 17,8 16 1,5 25,0 20 1,5 32,1 30 1,5 47,1 16 2,0 34,8 20 2,0 42,8 30 2,0 62,8 16 2,5 43,5 20 2,5 53,5 30 2,5 78,5 16 3,0 52,2 20 3,0 64,2 30 3,0 94,2 20 3,5 74,9 Dimensions in mm 130 4 Volume  4 2013 ØDp 16,0 24,0 30,0 45,0 32,0 40,0 60,0 40,0 50,0 75,0 48,0 60,0 90,0 70,0 B 14,0 18,0 20,0 25,0 20,0 27,0 30,0 27,0 30,0 35,0 30,0 35,0 40,0 40,5 HPC F 4 6 8 10 9 12 16 10 12 18 12 18 22 22 ØDn 13 20 22 35 25 32 50 30 38 50 38 44 60 56 ØA 5 8 6 12 10 8 12 12 12 14 11 14 20 14 dm 18,59 25,10 28,70 39,70 28,80 35,70 47,80 37,30 45,90 59,10 44,20 51,10 68,10 58,60 L 14,0 17,0 18,0 22,5 17,0 22,0 27,0 22,0 27,0 32,0 26,0 31,0 36,0 36,0 Lm 9,0 8,9 9,0 12,0 9,3 12,0 12,8 13,3 16,0 16,0 16,2 13,6 19,0 19,0 Price each 1 to 9 4,39 F 5,32 F 6,25 F 9,21 F 7,54 F 10,68 F 12,20 F 9,59 F 11,42 F 16,08 F 14,03 F 15,15 F 19,79 F 17,57 F www.hpceurope.com - +33(0)4 37 496 496 Moulded plastic bevel gear Nylon 6 ratio B Lm - Module 1.5 to 3 - Moulded parts - Material: Nylon 6 reinforced with 30% glass fibre 2:1 3:1 dm ØDp ØA F L .Options. - HPC are unable to modify these parts -bored -  Please refer to the ZDB.. ØA: Pre t be us or ZTB.. ranges for parts hole m ed finish that can be modified ØDn Ratio 2:1 B Lm .Info.. ØDe dm F ØDp ØA - T  wo identical gears must be ordered to make a pair L range conomy Ratio 3:1 E ØDn ØDe discounts Part number Ratio 2:1 Teeth Z Module ØDe Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request ØDp B F ØDn ØA dm L Lm Price each 1 to 9 MDB1.5-16 MDB1.5-32 MDB2-16 MDB2-32 MDB2.5-16 MDB2.5-32 MDB3-16 MDB3-32 16 32 16 32 16 32 16 32 1,5 1,5 2,0 2,0 2,5 2,5 3,0 3,0 26,7 49,3 35,6 65,8 44,4 82,2 53,4 98,7 24 48 32 64 40 80 48 96 18,5 20,0 23,0 25,0 27,5 30,0 28,0 33,0 8 8 10 10 12 12 15 15 18 32 24 40 30 50 40 60 8 12 10 12 12 15 14 15 34,9 27,5 45,4 35,2 56,0 43,5 61,6 50,4 17,0 17,5 21,0 22,0 25,0 26,5 25,0 30,5 10,3 10,0 12,2 10,0 14,4 10,0 11,6 15,0 6,58 F 12,20 F 8,10 F 18,08 F 10,14 F 23,14 F 18,34 F 38,36 F MTB1.5-16 MTB1.5-48 MTB2.5-16 MTB2.5-48 MTB3-16 MTB3-48 16 48 16 48 16 48 1,5 1,5 2,5 2,5 3,0 3,0 26,9 24 72,9 72 44,7 40 121,6 120 53,7 48 145,9 144 22,0 21,0 28,0 32,0 30,0 38,0 12 12 18 18 18 18 20 42 34 60 35 50 8 15 14 20 10 20 46,3 29,2 70,4 44,6 84,2 54,1 21,0 19,0 26,0 27,0 28,0 32,0 9,7 12,0 9,2 16,0 11,2 19,0 8,10 F 17,37 F 13,30 F 26,13 F 20,71 F 38,36 F Ratio 3:1 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 131 Moulded plastic bevel gear Nylon 6 moulded RAtio 1.5:1 4:1 - Module 2 to 3 - Moulded parts - Material: Nylon 6 reinforced with 30% glass fibre -bored ØA: Pre ust be hole m hed finis .Options. - HPC are unable to modify these parts - Please refer to the ZDB.. or ZTB.. ranges for parts that can be modified dm B Lm Ratio 4:1 ØDp ØA .Info.. F - T  wo identical gears must be ordered to make a pair L y range ØDn Econom Lm B ØDe dm Ratio 1.5:1 ØDp ØA F L discounts Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request ØDn ØDe Part number Teeth Z Module ØDe MFB2.5-16 MFB2.5-64 MFB3-16 MFB3-64 16 64 16 64 2,5 2,5 3,0 3,0 44,9 161,2 53,8 193,5 40 160 48 192 30,5 35,0 32,0 42,0 18 18 20 20 32 80 35 60 15 20 10 19 92,6 48,8 108,0 58,8 MHB2-20 20 MHB2-30 30 2,0 2,0 43,3 62,2 40 60 23,0 27,0 10 10 30 50 8 11 43,3 40,6 Ratio 4:1 Ratio 1,5:1 132 4 Volume  4 2013 ØDp B HPC F ØDn ØA dm Lm Price each 1 to 9 29,0 30,0 30,0 36,0 11,7 16,0 11,1 22,0 12,39 F 55,24 F 23,14 F 61,38 F 23,0 27,5 10,2 12,54 F 15,2 18,34 F L www.hpceurope.com - +33(0)4 37 496 496 Machined plastic bevel gear Delrin RATIO E - Module 0.8 to 2.5 - Machined parts - Pressure angle 20° - Teeth Gleason - Material: Delrin plastic - Working temp -50° to +80°C - Two identical gears must be ordered to make a pair 45ϒ H F G T Tapped Trou hole taraudé ØR "R" 1:1 ØA ØM 45ϒ Centre de drill Point repère ØP ØD TORQUE AND POWER INDICATION Torque (Nm) Power (kW) 2.5 MOD 0.91 0.09 For 20 teeth 2.0 1.5 MOD MOD 0.46 0.20 0.05 0.02 Teeth Part number Z Module ØP ZB0.8-16 16 12,80 ZB0.8-20 20 16,00 0,8 ZB0.8-25 25 20,00 ZB0.8-30 30 24,00 ZB1-20 20 20,00 ZB1-25 25 1,0 25,00 ZB1-30 30 30,00 ZB1.25-20 20 25,00 ZB1.25-25 25 1,25 31,25 ZB1.25-30 30 37,50 ZB1.5-20 20 30,00 ZB1.5-25 25 1,5 37,50 ZB1.5-30 30 45,00 ZB2-20 20 40,00 ZB2-25 25 2,0 50,00 ZB2-30 30 60,00 ZB2.5-16 16 40,00 ZB2.5-20 20 2,5 50,00 ZB2.5-25 25 62,50 Dimensions in mm E 20 20 20 20 25 25 25 23 28 36 35 35 35 42 42 42 50 50 50 at 1000 rpm 1.25 1.0 MOD MOD 0.15 0.12 0.016 0.013 ØD ØA 13,93 6 17,13 6 21,13 6 25,13 6 21,41 8 26,41 8 31,41 8 26,70 8 33,00 8 39,30 10 32,12 10 39,62 10 47,12 10 43,00 12 52,83 12 63,00 12 43,50 15 54,00 15 66,00 15 +33(0)4 37 490 055 - cial2@hpceurope.com 0.8 MOD 0.03 0.003 ØM 10 13 16 20 18 22 26 22 25 30 26 32 38 34 40 50 35 40 55 F 16,00 14,76 13,36 11,96 18,45 16,68 14,95 15,27 17,87 23,47 25,17 22,57 19,92 29,00 25,52 21,87 36,80 33,50 30,50 HPC discounts G 12,21 10,51 8,00 6,00 14,00 10,80 8,00 9,00 9,20 13,50 18,00 13,50 9,00 19,00 12,00 7,00 27,50 20,00 15,00 Qty. 1+ 6+ 30+ Disc. List -22% On request Price each H ØR T 1 to 5 3,00 M3 3,00 8,78 F 3,40 M3 3,40 11,44 F 4,24 M3 4,24 15,88 F 5,09 M3 5,09 17,15 F 4,24 M4 4,24 17,52 F 5,28 M4 5,28 18,67 F 6,35 M4 6,35 19,91 F 6,00 M4 6,00 17,80 F 7,00 M4 7,00 on request 8,00 M4 8,00 22,78 F 6,35 M4 6,35 18,94 F 8,00 M4 8,00 22,03 F 9,50 M4 9,50 23,31 F 8,50 M5 8,50 22,19 F 10,60 M5 10,60 24,73 F 12,70 M5 12,70 27,80 F 8,00 M5 8,00 22,69 F 10,60 M5 10,60 28,30 F 15,00 M5 15,00 32,20 F Volume 4 2013 4 133 Machined plastic bevel gear Delrin RAtio 1:1 E - Module 3 to 6 - Machined parts - Pressure angle 20° - Teeth Gleason - Material: Delrin plastic - Working temp -50° to +80°C - Two identical gears must be ordered to make a pair H F G ØA ØM 45° 45° Tapped Trou hole taraudé ØR T "R" Point de repère Centre drill ØP ØD For 20 teeth at 1000 3.0 4.0 5.0 MOD MOD MOD 1.93 2.84 5 0.20 0.83 0.54 Teeth Part number Z Module ØP ZB3-16 16 48 57 ZB3-19 19 3 78 ZB3-26 26 90 ZB3-30 30 64 ZB4-16 16 76 ZB4-19 19 4 104 ZB4-26 26 120 ZB4-30 30 80 ZB5-16 16 100 ZB5-20 20 5 125 ZB5-25 25 150 ZB5-30 30 96 ZB6-16 16 120 ZB6-20 20 6 150 ZB6-25 25 180 ZB6-30 30 Dimensions in mm E 44,0 49,0 65,0 68,5 55,5 65,0 82,0 90,0 70,0 80,0 100,0 114,0 80,0 90,0 115,0 130,0 134 4 Volume  4 2013 rpm 6.0 MOD 8 0.85 discounts ØD ØA 52,24 15 61,24 16 82,24 18 94,24 20 69,66 15 81,66 18 109,66 22 125,66 25 87,10 18 107,10 20 132,10 25 157,10 30 104,52 25 128,52 30 158,52 35 188,52 35 HPC ØM 40,0 50,0 64,0 76,0 50,0 62,5 85,0 102,0 60,0 80,0 80,0 100,0 75,0 96,0 100,0 120,0 F 29,08 31,01 40,03 39,65 35,81 41,43 48,69 51,51 46,13 49,04 59,47 65,87 50,10 52,32 67,29 72,24 G 16,00 17,02 19,03 16,51 16,49 20,24 20,50 21,00 20,00 21,50 24,00 26,00 22,00 18,50 24,00 28,00 Qty. 1+ 6+ 30+ Disc. List -22% On request Price each H ØR T 1 to 5 11 M5 8 13 M5 9 18 M6 10 21 M6 8 15 M5 8 18 M6 10 24 M6 10 28 M8 11 20 M8 11 24 M8 12 28 M10 14 35 M10 15 22 M10 12 28 M10 12 35 M10 14 42 M10 16 On request TORQUE AND POWER INDICATION Torque (Nm) Power (kW) www.hpceurope.com - +33(0)4 37 496 496 Machined plastic bevel gear Delrin RAtio - Module 0.8 to 2.5 - Machined parts - Pressure angle 20° - Teeth Gleason - Material: Delrin plastic - Working temp. -50° to +80°C E H ØM ØP ØD 2:1 3:1 4:1 F G T Point de drill repère Tapped hole ØR "R" ØA Centre Trou taraudé Part number ZDB0.8-15 ZDB0.8-30 ZDB1-15 ZDB1-30 ZDB1.5-15 ZDB1.5-30 ZDB2-15 ZDB2-30 ZDB2.5-15 ZDB2.5-30 ZTB0.8-15 ZTB0.8-45 ZTB1-15 ZTB1-45 ZTB1.5-15 ZTB1.5-45 ZFB0.8-15 ZFB0.8-60 ZFB1-15 ZFB1-60 ZFB1.5-15 ZFB1.5-60 For 20 teeth 2.0 1.5 MOD MOD 0.46 0.20 0.05 0.02 Teeth Z Module ØP 15 12,00 0,8 24,00 30 15,00 15 1 30,00 30 15 22,50 1,5 30 45,00 30,00 15 2 60,00 30 37,50 15 2,5 75,00 30 12,00 15 0,8 45 36,00 15 15,00 1 45 45,00 15 22,50 1,5 45 67,50 15 12,00 0,8 60 48,00 15 15,00 1 60 60,00 15 22,50 1,5 60 60,00 2:1 3:1 4:1 Dimensions in mm E 20,00 14,00 24,00 18,00 35,00 27,00 45,00 35,00 54,00 41,50 28,00 20,00 32,00 24,00 45,00 32,00 35,00 20,00 45,00 30,00 60,00 35,00 at 1000 rpm 1.25 1.0 MOD MOD 0.15 0.12 0.016 0.013 ØD ØA 13,93 6 24,64 8 17,42 8 30,58 10 26,12 10 45,87 10 34,83 12 61,16 12 43,54 15 76,45 15 14,14 6 36,30 8 17,67 8 45,37 10 26,51 10 68,06 15 14,23 6 48,22 8 17,79 8 60,27 10 26,69 10 90,41 15 +33(0)4 37 490 055 - cial2@hpceurope.com 0.8 MOD 0.03 0.003 ØM 10 20 14 25 21 30 28 40 32 50 10 28 13 40 18 50 10 30 13 40 18 50 F 11,90 10,08 13,87 13,11 19,84 19,66 24,76 25,21 29,51 29,31 15,63 16,07 16,54 19,09 21,80 24,63 18,07 15,98 24,22 25,08 28,82 27,61 HPC discounts G 7,50 5,50 8,76 7,00 12,13 11,00 14,86 14,00 16,51 13,31 9,67 8,00 9,18 10,00 10,51 12,00 10,58 8,00 14,73 12,00 12,08 12,00 Qty. 1+ 6+ 30+ Disc. List -22% On request Price each H ØR T 1 to 5 4,02 M3 3,50 15,19 F 4,02 M3 3,50 17,96 F 5,03 M4 4,00 17,24 F 5,03 M4 4,00 21,18 F 7,55 M4 5,00 23,90 F 7,55 M4 5,00 24,04 F 10,06 M5 7,50 20,77 F 10,06 M5 8,00 28,90 F 13,53 M5 8,00 28,42 F 13,53 M5 7,00 35,94 F 5,69 M3 5,00 5,69 M3 4,00 7,12 M4 4,50 7,12 M4 5,00 10,67 M4 5,00 10,67 M4 6,00 7,10 M3 5,00 7,10 M3 4,00 9,28 M4 7,00 9,28 M4 6,00 13,91 M4 6,00 13,91 M4 6,00 On request TORQUE AND POWER 2.5 INDICATION MOD Torque (Nm) 0.91 Power (kW) 0.09 Volume 4 2013 4 135 nd a s ls m r ee 159 o h W w -p 38 1 . p Shaft type or bored type worm and wheel p.138 Shaft type or bored type worm and wheel p.138 Anti-backlash wormwheel p.158 Worm and wheel set MODULE 0.4 Worm in steel or machined plastic Pitch 1.257mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: Bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 20 to 348 teeth Ø8,00 Ø9,8 + 0 - 0,02 M3 Ø9 Ø9 Ø9,8 25 25 75 25 18 Steel worm with shaft (SW) Ø8,00 Ø9,8 +0 8 Ø9 25 +0,02 -0,02 25 75 Ø8,00 -0,1 Plastic ZW0.4-1 ZW0.4-2 ZW0.4-3 ZW0.4-4 Dimensions in mm ZSW0.4-1 ZSW0.4-2 ZSW0.4-3 ZSW0.4-4 138 4 Volume  4 2013 Ø4 H8 Pin hole Ø1,5 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 25 DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft Unhardened steel W0.4-1 SW0.4-1 W0.4-2 SW0.4-2 W0.4-3 SW0.4-3 W0.4-4 SW0.4-4 Unhardened steel WH0.4-1 SWH0.4-1 WH0.4-2 SWH0.4-2 WH0.4-3 SWH0.4-3 WH0.4-4 SWH0.4-4 25 3,5 No. of starts Lead angle 1 2 3 4 2°32’ 5°04’ 7°35’ 10°40’ 22,53 F 22,85 F 24,00 F 25,84 F 41,19 F 44,09 F 46,60 F 48,02 F 1 2 3 4 2°32’ 5°04’ 7°35’ 10°40’ 31,31 F 32,47 F 33,58 F 36,69 F 58,58 F 62,67 F 66,17 F 68,28 F 1 2 3 4 2°32’ 5°04’ 7°35’ 10°40’ 15,49 F 16,15 F 16,89 F 18,18 F 29,12 F 31,11 F 32,89 F 33,94 F HPC Price each 1 to 5 Worm with bore Worm with shaft www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 0.4 PAS 1.257mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 0.57 (0.0012) Steel Hardened steel 1.00 (0.0021) - Delrin Delrin Nm (kW) 0.36 (0.00075) - 0.14 (0.00030) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W0.4-1. wheel M0.4-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 4 6 10 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic M0.4-20/1 ZM0.4-20/1 M0.4-24/1 ZM0.4-24/1 M0.4-28/1 ZM0.4-28/1 M0.4-30/1 ZM0.4-30/1 M0.4-34/1 ZM0.4-34/1 M0.4-36/1 ZM0.4-36/1 M0.4-40/1 ZM0.4-40/1 M0.4-45/1 ZM0.4-45/1 M0.4-48/1 ZM0.4-48/1 M0.4-50/1 ZM0.4-50/1 M0.4-62/1 ZM0.4-62/1 M0.4-72/1 ZM0.4-72/1 M0.4-75/1 ZM0.4-75/1 M0.4-84/1 ZM0.4-84/1 M0.4-100/1 ZM0.4-100/1 M0.4-120/1 ZM0.4-120/1 M0.4-130/1 ZM0.4-130/1 M0.4-140/1 ZM0.4-140/1 M0.4-200/1 ZM0.4-200/1 M0.4-300/1 ZM0.4-300/1 M0.4-348 ZM0,4-348 Z Teeth ØP 20 8,00 24 9,60 28 11,20 30 12,00 34 13,60 36 14,40 40 16,00 45 18,00 48 19,20 50 20,00 62 24,80 72 28,80 75 30,00 84 33,60 100 40,00 120 48,00 130 52,00 140 56,00 200 80,00 300 120,00 Qty. 1+ 6+ 30+ Disc. List -22% On request Centres 8,50 9,30 10,10 10,50 11,30 11,70 12,50 13,50 14,10 14,50 16,90 18,90 19,50 21,30 24,50 28,50 30,50 32,50 44,50 64,50 ØC 8,80 10,40 12,00 12,80 14,40 15,20 16,80 18,80 20,00 20,80 25,60 29,60 30,80 34,40 40,80 48,80 52,80 56,80 80,80 120,80 ØE 9,20 10,80 12,40 13,20 14,80 15,60 17,20 19,20 20,40 21,20 26,00 30,00 31,20 34,80 41,20 49,20 53,20 57,20 81,20 121,20 ØM 8,80 10,40 10,40 8,00 8,00 8,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 20,00 20,00 Wheels available up to this size 348 Dimensions : contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC ØA 3 3 3 3 3 3 4 4 4 4 4 5 5 5 5 5 5 5 6 6 Price each 1 to 5 Bronze Plastic 18,50 F 18,98 F 20,27 F 20,70 F 21,14 F 22,03 F 22,79 F 23,09 F 23,09 F 23,09 F 23,24 F 25,02 F 25,14 F 26,45 F 32,55 F 36,70 F 42,14 F 48,02 F 90,82 F 211,62 F 9,30 F 9,52 F 10,16 F 10,37 F 10,64 F 10,99 F 11,44 F 11,62 F 11,68 F 11,80 F 12,25 F 12,54 F 13,90 F 14,69 F 17,42 F 20,18 F 22,00 F 24,20 F 45,70 F 77,10 F On request On request Volume 4 2013 4 139 Worm and wheel set Worm in steel or machined plastic MODULE 0.5 Pitch 1.571mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: b  ronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 12 to 278 teeth Ø13 Ø8,00 + 0 - 0,02 Ø12 25 25 75 Ø13 25 Ø13 +0 8 Ø12 25 +0,02 -0,02 25 75 Ø12 18 Steel worm with shaft (SW) Ø8,00 M3 Ø8,00 -0,1 Unhardened steel Ø5 H8 Pin hole Ø1,5 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 25 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 25 3,5 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W0.5-1 W0.5-2 W0.5-3 W0.5-4 SW0.5-1 SW0.5-2 SW0.5-3 SW0.5-4 1 2 3 4 2°23’ 4°45’ 7°07’ 9°27’ 22,03 F 22,85 F 24,00 F 25,84 F 43,36 F 45,30 F 47,78 F 49,98 F WH0.5-1 WH0.5-2 WH0.5-3 WH0.5-4 SWH0.5-1 SWH0.5-2 SWH0.5-3 SWH0.5-4 1 2 3 4 2°23’ 4°45’ 7°07’ 9°27’ 31,31 F 32,47 F 34,13 F 36,69 F 61,64 F 64,32 F 67,90 F 71,10 F ZW0.5-1 ZW0.5-2 ZW0.5-3 ZW0.5-4 ZSW0.5-1 ZSW0.5-2 ZSW0.5-3 ZSW0.5-4 1 2 3 4 2°23’ 4°45’ 7°07’ 9°27’ 15,49 F 16,15 F 16,89 F 18,18 F 30,63 F 31,94 F 33,67 F 35,34 F Hardened steel Plastic Dimensions in mm 140 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 0.5 PITCH 1.571mm Torque and power indication for 50 teeth at 1000 rpm (imput) WHEEL material Bronze Nm (kW) WORM material 1.01 (0.0060) Steel Hardened steel 1.86 (0.0039) - Delrin Delrin Nm (kW) 0.65 (0.0040) - 0.25 (0.0005) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W0.5-1. wheel M0.5-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 5 5 10 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic M0.5-12 M0.5-15 M0.5-20 M0.5-25 M0.5-28 M0.5-30 M0.5-32 M0.5-40 M0.5-42 M0.5-48 M0.5-50 M0.5-60 M0.5-78 M0.5-80 M0.5-90 M0.5-100 M0.5-110 M0.5-150 M0.5-160 M0.5-200 ZM0.5-12 ZM0.5-15 ZM0.5-20 ZM0.5-25 ZM0.5-28 ZM0.5-30 ZM0.5-32 ZM0.5-40 ZM0.5-42 ZM0.5-48 ZM0.5-50 ZM0.5-60 ZM0.5-78 ZM0.5-80 ZM0.5-90 ZM0.5-100 ZM0.5-110 ZM0.5-150 ZM0.5-160 ZM0.5-200 Z Teeth ØP 12 6,00 15 7,50 20 10,00 25 12,50 28 14,00 30 15,00 32 16,00 40 20,00 42 21,00 48 24,00 50 25,00 60 30,00 78 39,00 80 40,00 90 45,00 100 50,00 110 55,00 150 75,00 160 80,00 200 100,00 Centres 9,00 9,75 11,00 12,25 13,00 13,50 14,00 16,00 16,50 18,00 18,50 21,00 25,50 26,00 28,50 31,00 33,50 43,50 46,00 56,00 ØC 7,00 8,50 11,00 13,50 15,00 16,00 17,00 21,00 22,00 25,00 26,00 31,00 40,00 41,00 46,00 51,00 56,00 76,00 81,00 101,00 ØE 7,50 9,00 11,50 14,00 15,50 16,50 17,50 21,50 22,50 25,50 26,50 31,50 40,50 41,50 46,50 51,50 56,50 76,50 81,50 101,50 ØM 5,00 6,50 8,50 10,00 10,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 13,00 ØA Wheels available up to this size M0,5-278 ZM0,5-278 278 Dimensions in mm Qty. 1+ 6+ 30+ Disc. List -22% On request Dimensions : contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 3 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Price each 1 to 5 Bronze Plastic 17,11 F 18,08 F 20,00 F 21,36 F 21,74 F 21,81 F 22,76 F 26,56 F 26,97 F 28,32 F 28,71 F 33,84 F 42,98 F 44,35 F 59,52 F 70,72 F 73,64 F 79,37 F 90,54 F 171,81 F 8,58 F 9,08 F 10,05 F 10,74 F 10,90 F 10,93 F 11,44 F 13,36 F 13,52 F 14,20 F 14,42 F 18,75 F 23,81 F 27,94 F 37,46 F 44,59 F 46,39 F 49,91 F 57,07 F 62,63 F On request On request Volume 4 2013 4 141 Worm and wheel set MODULE 0.8 Worm in steel or machined plastic Pitch 2.513mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: b  ronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 12 to 170 teeth Ø10,00 + - 0 0,02 Ø13,6 Ø12 M3 Ø13,6 Ø12 30 30 90 30 22 Steel worm with shaft (SW) Ø10,00 Ø13,6 Ø12 30 30 90 +0,02 -0,02 +0 Ø10,00 -0,1 10 Unhardened steel Ø6 H8 Pin hole Ø1,5 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 30 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 30 4 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W0.8-1 W0.8-2 W0.8-3 W0.8-4 SW0.8-1 SW0.8-2 SW0.8-3 SW0.8-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°55’ 25,19 F 26,30 F 28,50 F 30,89 F 43,36 F 45,62 F 47,78 F 49,98 F WH0.8-1 WH0.8-2 WH0.8-3 WH0.8-4 SWH0.8-1 SWH0.8-2 SWH0.8-3 SWH0.8-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°55’ 35,82 F 37,37 F 40,61 F 38,58 F 61,64 F 64,80 F 67,90 F 71,10 F ZW0.8-1 ZW0.8-2 ZW0.8-3 ZW0.8-4 ZSW0.8-1 ZSW0.8-2 ZSW0.8-3 ZSW0.8-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°55’ 17,75 F 18,50 F 20,05 F 21,74 F 30,55 F 32,06 F 33,58 F 35,17 F Hardened steel Plastic Dimensions in mm 142 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 0.8 PITCH 2.513mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 2.82 (0.006) Steel Hardened steel 5.26 (0.011) - Delrin Delrin Nm (kW) 1.84 (0.0039) - 0.70 (0.0015) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W0.8-1. wheel M0.8-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 6 6 12 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic M0.8-12 ZM0.8-12 M0.8-15 ZM0.8-15 M0.8-18 ZM0.8-18 M0.8-20 ZM0.8-20 M0.8-24 ZM0.8-24 M0.8-25 ZM0.8-25 M0.8-28 ZM0.8-28 M0.8-30 ZM0.8-30 M0.8-32 ZM0.8-32 M0.8-40 ZM0.8-40 M0.8-42 ZM0.8-42 M0.8-48 ZM0.8-48 M0.8-50 ZM0.8-50 M0.8-60 ZM0.8-60 M0.8-78 ZM0.8-78 M0.8-80 ZM0.8-80 M0.8-90 ZM0.8-90 M0.8-100 ZM0.8-100 M0.8-110 ZM0.8-110 M0.8-150 ZM0.8-150 Z Teeth 12 15 18 20 24 25 28 30 32 40 42 48 50 60 78 80 90 100 110 150 Qty. 1+ 6+ 30+ Disc. List -22% On request ØP 9,60 12,00 14,40 16,00 19,20 20,00 22,40 24,00 25,60 32,00 33,60 38,40 40,00 48,00 62,40 64,00 72,00 80,00 88,00 120,00 Price each 1 to 5 ØA Bronze Plastic 5 18,50 F 9,30 F 5 20,16 F 10,10 F 5 22,53 F 11,32 F 5 22,93 F 11,49 F 5 24,85 F 12,43 F 8 26,15 F 13,14 F 8 27,11 F 13,61 F 8 28,19 F 14,18 F 8 29,19 F 14,69 F 8 34,86 F 19,27 F 8 37,35 F 20,67 F 8 43,53 F 24,04 F 8 46,95 F 29,55 F 8 71,84 F 45,24 F 8 77,24 F 48,65 F 8 77,94 F 49,12 F 8 88,76 F 55,92 F 8 97,41 F 61,33 F 8 119,93 F 75,57 F 8 238,07 F 86,74 F Dimensions : contact us On request On request ØC 11,20 13,60 16,00 17,60 20,80 21,60 24,00 25,60 27,20 33,60 35,20 40,00 41,60 49,60 64,00 65,60 73,60 81,60 89,60 121,60 ØE 12,00 14,40 16,80 18,40 21,60 22,40 24,80 26,40 28,00 34,40 36,00 40,80 42,40 50,40 64,80 66,40 74,40 82,40 90,40 122,40 Wheels available up to this size M0,8-170 ZM0,8-170 170 Dimensions in mm ØM 8 10 10 12 12 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 Centres 10,80 12,00 13,20 14,00 15,60 16,00 17,20 18,00 18,80 22,00 22,80 25,20 26,00 30,00 37,20 38,00 42,00 46,00 50,00 66,00 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 143 Worm and wheel set MODULE 1.0 Worm in steel or machined plastic PITCH 3.142mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle + 0 - Wheel can have from 12 to 138 teeth Ø12,00 - 0,02 Ø17 Ø15 M4 Ø17 40 40 120 40 32 Steel worm with shaft (SW) Ø12,00 Ø17 Ø15 40 40 120 Ø15 +0,02 -0,02 +0 Ø12,00 -0,1 12 Unhardened steel Ø8 H8 Pin hole Ø2 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 40 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 40 4 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W1-1 W1-2 W1-3 W1-4 SW1-1 SW1-2 SW1-3 SW1-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°56’ 29,00 F 30,68 F 33,67 F 35,15 F 53,56 F 55,00 F 58,70 F 59,58 F WH1-1 WH1-2 WH1-3 WH1-4 SWH1-1 SWH1-2 SWH1-3 SWH1-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°56’’ 41,33 F 43,61 F 47,82 F 49,98 F 76,09 F 78,17 F 83,37 F 84,62 F ZW1-1 ZW1-2 ZW1-3 ZW1-4 ZSW1-1 ZSW1-2 ZSW1-3 ZSW1-4 1 2 3 4 3°48’ 7°35’ 11°18’ 14°56’ 20,51 F 21,64 F 23,76 F 24,76 F 37,81 F 38,77 F 41,39 F 42,02 F Hardened steel Plastic Dimensions in mm 144 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 1.0 PITCH 3.142mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Delrin Nm (kW) Nm (kW) WORM material 5.87 (0.012) 3.42 (0.0072) Steel - Hardened steel 10.06 (0.021) - 1.32 (0.0027) Delrin ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W1-1. wheel M1-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 8 7 15 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Plastic Bronze M1-12 M1-15 M1-18 M1-20 M1-24 M1-25 M1-28 M1-30 M1-32 M1-40 M1-42 M1-48 M1-50 M1-60 M1-78 M1-80 M1-90 M1-100 M1-110 ZM1-12 ZM1-15 ZM1-18 ZM1-20 ZM1-24 ZM1-25 ZM1-28 ZM1-30 ZM1-32 ZM1-40 ZM1-42 ZM1-48 ZM1-50 ZM1-60 ZM1-78 ZM1-80 ZM1-90 ZM1-100 ZM1-110 M1-138 ZM1-138 Dimensions in mm Z Teeth 12 15 18 20 24 25 28 30 32 40 42 48 50 60 78 80 90 100 110 Qty. 1+ 6+ 30+ Disc. List -22% On request ØP 12 15 18 20 24 25 28 30 32 40 42 48 50 60 78 80 90 100 110 Centres 13,50 15,00 16,50 17,50 19,50 20,00 21,50 22,50 23,50 27,50 28,50 31,50 32,50 37,50 46,50 47,50 52,50 57,50 62,50 ØC 14 17 20 22 26 27 30 32 34 42 44 50 52 62 80 82 92 102 112 ØE 15 18 21 23 27 28 31 33 35 43 45 51 53 63 81 83 93 103 113 ØM 14 15 15 15 20 20 20 25 25 25 25 25 25 25 25 25 25 25 30 ØA 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 Wheels available up to this size 138 Dimensions : contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 Bronze Plastic 29,19 F 30,21 F 31,47 F 31,78 F 33,44 F 34,93 F 36,22 F 37,37 F 39,29 F 53,04 F 54,22 F 65,76 F 70,78 F 77,96 F 101,71 F 115,71 F 143,83 F 225,51 F 225,51 F 14,69 F 15,16 F 15,79 F 15,96 F 16,89 F 17,52 F 18,18 F 20,71 F 21,79 F 33,37 F 34,13 F 41,39 F 44,59 F 49,12 F 64,06 F 72,88 F 90,62 F 82,22 F 82,22 F On request On request Volume 4 2013 4 145 Worm and wheel set MODULE 1.25 Worm in steel or machined plastic Pitch 3.927mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 12 to 110 teeth Ø18,5 + 0 0,02 Ø12,00 - Ø16 M4 Ø18,5 Ø16 40 40 120 40 32 Steel worm with shaft (SW) Ø12,00 Ø18,5 Ø16 40 40 120 +0,02 -0,02 +0 Ø12,00 -0,1 12 Unhardened steel Ø8 H8 Pin hole Ø2 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 40 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 40 4 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W1.25-1 W1.25-2 W1.25-3 W1.25-4 SW1.25-1 SW1.25-2 SW1.25-3 SW1.25-4 1 2 3 4 4°28’ 8°53’ 13°11’ 17°21’ 29,00 F 30,68 F 33,67 F 35,15 F 53,56 F 55,00 F 58,70 F 59,58 F WH1.25-1 WH1.25-2 WH1.25-3 WH1.25-4 SWH1.25-1 SWH1.25-2 SWH1.25-3 SWH1.25-4 1 2 3 4 4°28’ 8°53’ 13°11’ 17°21’ 41,33 F 43,61 F 47,82 F 49,98 F 76,09 F 78,17 F 83,37 F 84,62 F ZW1.25-1 ZW1.25-2 ZW1.25-3 ZW1.25-4 ZSW1.25-1 ZSW1.25-2 ZSW1.25-3 ZSW1.25-4 1 2 3 4 4°28’ 8°53’ 13°11’ 17°21’ 20,51 F 21,57 F 23,69 F 24,73 F 37,71 F 38,69 F 41,34 F 38,13 F Hardened steel Plastic Dimensions in mm 146 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 1.25 PITCH 3.927mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 11.41 (0.024) Steel Hardened steel 20.25 (0.042) - Delrin Delrin Nm (kW) 7.02 (0.015) - 2.75 (0.006) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W1.25-1. wheel M1.25-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 11 9 20 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic M1.25-12 M1.25-15 M1.25-20 M1.25-38 M1.25-45 M1.25-60 Z Teeth ZM1.25-12 ZM1.25-15 ZM1.25-20 ZM1.25-38 ZM1.25-45 ZM1.25-60 12 15 20 38 45 60 ØP 15,00 18,75 25,00 47,50 56,25 75,00 Centres 15,50 17,38 20,50 31,75 36,13 45,50 ØC 17,50 21,25 27,50 50,00 58,75 77,50 ØE 18,75 22,50 28,75 51,25 60,00 78,75 ØM 14,00 14,00 20,00 25,00 25,00 32,00 ØA 8 8 10 10 10 12 Wheels available up to this size M1,25-110 ZM1,25-110 110 Dimensions in mm Qty. 1+ 6+ 30+ Disc. List -22% On request Dimensions : contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 Bronze Plastic 31,71 F 33,35 F 32,37 F 59,11 F 75,68 F 125,76 F 15,96 F 16,74 F 18,75 F 37,20 F 47,72 F 79,20 F On request On request Volume 4 2013 4 147 Worm and wheel set MODULE 1.5 Worm in steel or machined plastic PITCH 4.712mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 12 to 90 teeth Ø23 + 0 0,02 Ø15,00 - Ø20 M5 Ø23 45 45 135 45 35 Steel worm with shaft (SW) Ø15,00 Ø23 Ø20 45 45 135 Ø20 +0,02 -0,02 +0 Ø15,00 -0,1 15 Unhardened steel Ø10 H8 Pin hole Ø3 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 45 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 45 5 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W1.5-1 W1.5-2 W1.5-3 W1.5-4 SW1.5-1 SW1.5-2 SW1.5-3 SW1.5-4 1 2 3 4 4°17’ 8°31’ 12°40’ 16°42’ 33,62 F 39,05 F 40,98 F 44,45 F 62,97 F 66,32 F 68,40 F 69,14 F WH1.5-1 WH1.5-2 WH1.5-3 WH1.5-4 SWH1.5-1 SWH1.5-2 SWH1.5-3 SWH1.5-4 1 2 3 4 4°17’ 8°31’ 12°40’ 16°42’ 47,78 F 55,44 F 58,22 F 63,09 F 89,45 F 94,18 F 97,07 F 98,23 F ZW1.5-1 ZW1.5-2 ZW1.5-3 ZW1.5-4 ZSW1.5-1 ZSW1.5-2 ZSW1.5-3 ZSW1.5-4 1 2 3 4 4°17’ 8°31’ 12°40’ 16°42’ 23,68 F 27,42 F 28,82 F 31,25 F 44,50 F 46,86 F 48,28 F 48,80 F Hardened steel Plastic Dimensions in mm 148 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 1.5 PITCH 4.712mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 16.80 (0.035) Steel Hardened steel 30.00 (0.063) - Delrin Delrin Nm (kW) 10.05 (0.021) - 3.97 (0.008) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W1.5-1. wheel M1.5-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 12 10 22 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Z Part number Bronze ØP Centres ØC ØE ØM Plastic Teeth M1.5-12 ZM1.5-12 12 18,00 19,00 21,00 22,50 15 M1.5-15 ZM1.5-15 15 22,50 21,25 25,50 27,00 18 M1.5-18 ZM1.5-18 18 27,00 23,50 30,00 31,50 18 M1.5-20 ZM1.5-20 20 30,00 25,00 33,00 34,50 20 M1.5-22 ZM1.5-22 22 33,00 26,50 36,00 37,50 20 M1.5-24 ZM1.5-24 24 36,00 28,00 39,00 40,50 20 M1.5-25 ZM1.5-25 25 37,50 28,75 40,50 42,00 25 M1.5-28 ZM1.5-28 28 42,00 31,00 45,00 46,50 25 M1.5-30 ZM1.5-30 30 45,00 32,50 48,00 49,50 30 M1.5-32 ZM1.5-32 32 48,00 34,00 51,00 52,50 30 M1.5-34 ZM1.5-34 34 51,00 35,50 54,00 55,50 30 M1.5-40 ZM1.5-40 40 60,00 40,00 63,00 64,50 30 M1.5-42 ZM1.5-42 42 63,00 41,50 66,00 67,50 30 M1.5-48 ZM1.5-48 48 72,00 46,00 75,00 76,50 30 M1.5-50 ZM1.5-50 50 75,00 47,50 78,00 79,50 30 M1.5-60 ZM1.5-60 60 90,00 55,00 93,00 94,50 30 M1.5-78 ZM1.5-78 78 117,00 68,50 120,00 121,50 30 M1.5-80 ZM1.5-80 80 120,00 70,00 123,00 124,50 30 Wheels available up to this size M1,5-90 ZM1,5-90 Dimensions in mm ØA 8 8 8 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 Price each 1 to 5 Bronze Plastic 35,00 F 43,18 F 46,16 F 47,62 F 49,12 F 50,74 F 52,27 F 54,91 F 57,51 F 59,46 F 66,31 F 89,14 F 98,54 F 125,19 F 134,72 F 187,91 F 370,35 F 370,35 F 17,61 F 21,68 F 23,24 F 26,31 F 27,23 F 28,06 F 28,98 F 34,54 F 36,26 F 37,46 F 41,76 F 56,18 F 62,06 F 78,87 F 84,87 F 118,34 F 134,93 F 134,93 F Dimensions: contact us 476,70 F 160,24 F HPC Volume 4 2013 4 149 +33(0)4 37 490 055 - cial2@hpceurope.com Worm and wheel set MODULE 2.0 Worm in steel or machined plastic PITCH 6.283mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 12 to 285 teeth Ø20,00 Ø29 + 0 - 0,02 Ø25 M5 Ø25 50 50 150 Ø29 50 38 Steel worm with shaft (SW) Ø8,00 Ø29 +0 20 Ø25 50 +0,02 -0,02 50 150 Ø8,00 -0,1 Unhardened steel Ø15 H8 Pin hole Ø5 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 50 DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 50 6 No. of starts Lead angle Price each 1 to 5 Worm with bore Worm with shaft W2-1 W2-2 W2-3 W2-4 SW2-1 SW2-2 SW2-3 SW2-4 1 2 3 4 4°34’ 9°05’ 13°29’ 17°45’ 58,53 F 62,74 F 67,34 F 74,24 F 88,74 F 94,16 F 96,15 F 101,00 F WH2-1 WH2-2 WH2-3 WH2-4 SWH2-1 SWH2-2 SWH2-3 SWH2-4 1 2 3 4 4°34’ 9°05’ 13°29’ 17°45’ 83,15 F 89,14 F 95,63 F 105,42 F 126,12 F 133,74 F 136,69 F 143,44 F ZW2-1 ZW2-2 ZW2-3 ZW2-4 ZSW2-1 ZSW2-2 ZSW2-3 ZSW2-4 1 2 3 4 4°34’ 9°05’ 13°29’ 17°45’ 41,13 F 44,13 F 47,36 F 52,22 F 62,48 F 66,32 F 67,73 F 71,05 F Hardened steel Plastic Dimensions in mm 150 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 2.0 PITCH 6.283mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 45 (0.094) Steel 79 (0.166) Hardened steel - Delrin Delrin Nm (kW) 28.3 (0.059) - 11.0 (0.023) ØE a ØM ØA .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W2-1. wheel M2-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØC throat 12 (10*) 32 (30*) 20 *for delrin wheels BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic M2-12 ZM2-12 M2-15 ZM2-15 M2-18 ZM2-18 M2-20 ZM2-20 M2-22 ZM2-22 M2-24 ZM2-24 M2-25 ZM2-25 M2-28 ZM2-28 M2-30 ZM2-30 M2-32 ZM2-32 M2-34 ZM2-34 M2-40 ZM2-40 M2-42 ZM2-42 M2-45 ZM2-45 M2-48 ZM2-48 M2-50 ZM2-50 M2-60 ZM2-60 M2-65 ZM2-65 M2-78 ZM2-78 M2-80 ZM2-80 M2-285 ZM2-285 Dimensions in mm Qty. 1+ 6+ 30+ Disc. List -22% On request Z Teeth 12 15 18 20 22 24 25 28 30 32 34 40 42 45 48 50 60 65 78 80 ØP 24 30 36 40 44 48 50 56 60 64 68 80 84 90 96 100 120 130 156 160 Centres 24,50 27,50 30,50 32,50 34,50 36,50 37,50 40,50 42,50 44,50 46,50 52,50 54,50 57,50 60,50 62,50 72,50 77,50 90,50 92,50 ØC 28 34 40 44 48 52 54 60 64 68 72 84 88 94 100 104 124 134 160 164 ØE 30 36 42 46 50 54 56 62 66 70 74 86 90 96 102 106 126 136 162 166 ØM 20 25 30 30 30 30 40 40 50 50 50 50 50 50 50 50 50 50 50 50 ØA 12 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Wheels available up to this size 285 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 Bronze Plastic 72,18 F 88,02 F 96,55 F 100,17 F 112,11 F 118,10 F 121,18 F 127,19 F 130,20 F 135,24 F 150,65 F 201,97 F 220,76 F 250,48 F 408,07 F 408,07 F 502,63 F On request On request On request 36,30 F 48,77 F 52,82 F 63,04 F 66,84 F 70,59 F 74,38 F 81,19 F 81,96 F 84,37 F 94,95 F 127,30 F 139,06 F 157,88 F 140,95 F 140,95 F 173,49 F 206,02 F On request On request On request On request Volume 4 2013 4 151 Worm and wheel set MODULE 2.5 Worm in steel or machined plastic PITCH 7.854mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 15 to 230 teeth Ø25,00 Ø35 + 0 - 0,02 M6 Ø30 Ø30 Ø35 60 60 180 60 45 Steel worm with shaft (SW) Ø25,00 Ø35 +0 25 Ø30 60 +0,02 -0,02 60 180 Ø25,00 -0,1 Unhardened steel Ø15 H8 Pin hole Ø5 Steel (W) or plastic (ZW) shaft with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 60 DELRIN discounts Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 60 6 No. of starts Lead angle Qty. 1+ 6+ 30+ Disc. List -22% On request Price each 1 to 5 Worm with bore Worm with shaft W2.5-1 W2.5-2 W2.5-3 W2.5-4 SW2.5-1 SW2.5-2 SW2.5-3 SW2.5-4 1 2 3 4 4°34’ 9°50’ 13°29’ 17°45’ 88,24 F 94,18 F 98,00 F 101,34 F 129,71 F 135,17 F 140,47 F 146,92 F WH2.5-1 WH2.5-2 WH2.5-3 WH2.5-4 SWH2.5-1 SWH2.5-2 SWH2.5-3 SWH2.5-4 1 2 3 4 4°34’ 9°50’ 13°29’ 17°45’ 119,28 F 126,24 F 128,16 F 131,56 F 187,18 F 193,76 F 197,92 F 202,73 F ZW2.5-1 ZW2.5-2 ZW2.5-3 ZW2.5-4 ZSW2.5-1 ZSW2.5-2 ZSW2.5-3 ZSW2.5-4 1 2 3 4 4°34’ 9°50’ 13°29’ 17°45’ 58,28 F 62,48 F 65,25 F 67,61 F 88,02 F 91,92 F 95,70 F 100,35 F Hardened steel Plastic Dimensions in mm 152 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 2.5 PITCH 7.854mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 81 (0.169) Steel Hardened steel 124 (0.258) - Delrin Delrin Nm (kW) 40 (0.085) - 18 (0.034) .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W2.5-1. wheel M2.5-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØE a ØP ØA ØC throat 22 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic Z Teeth PM2.5-15 PM2.5-20 PM2.5-25 PM2.5-30 PM2.5-40 PM2.5-50 PM2.5-55 PM2.5-100 ZPM2.5-15 15 ZPM2.5-20 20 ZPM2.5-25 25 ZPM2.5-30 30 ZPM2.5-40 40 ZPM2.5-50 50 ZPM2.5-55 55 ZPM2.5-100 100 M2,5-230 ZM2,5-230 Dimensions in mm Qty. 1+ 6+ 30+ Disc. List -22% On request ØP 37,50 50,00 62,50 75,00 100,00 125,00 137,50 250,00 Centres 33,75 40,00 46,25 52,50 65,00 77,50 83,75 140,00 ØC 42,50 55,00 67,50 80,00 105,00 130,00 142,50 255,00 ØE 45,00 57,50 70,00 82,50 107,50 132,50 145,00 257,50 ØA 15 20 20 20 20 20 20 20 Wheels available up to this size 230 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 Bronze Plastic 68,06 F 83,42 F 92,91 F 97,03 F 300,68 F 476,70 F 572,04 F On request 48,97 F 60,02 F 66,84 F 69,79 F 109,62 F 160,24 F 197,34 F On request On request On request Volume 4 2013 4 153 Worm and wheel set MODULE 3.0 Worm in steel or machined plastic PITCH 9.425mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 15 to 285 teeth Ø8,00 Ø41 + 0 - 0,02 Ø35 M8 Ø41 Ø35 80 80 240 80 55 Steel worm with shaft (SW) Ø30,00 Ø41 Ø35 80 80 240 +0,02 -0,02 +0 Ø30,00 -0,1 30 Unhardened steel Ø20 H8 Pin hole Ø6 Steel (W) or plastic (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 80 DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 70 7 No. of starts Lead angle Price each 1 to 5 Worm with bore Worm with shaft W3-1 W3-2 W3-3 W3-4 SW3-1 SW3-2 SW3-3 SW3-4 1 2 3 4 4°54’ 9°44’ 14°25’ 18°55’ 105,31 F 108,79 F 112,02 F 116,44 F 150,68 F 159,95 F 166,65 F 173,24 F WH3-1 WH3-2 WH3-3 WH3-4 SWH3-1 SWH3-2 SWH3-3 SWH3-4 1 2 3 4 4°54’ 9°44’ 14°25’ 18°55’ 135,17 F 138,76 F 145,73 F 151,57 F 206,26 F 200,46 F 203,70 F 213,87 F ZW3-1 ZW3-2 ZW3-3 ZW3-4 ZSW3-1 ZSW3-2 ZSW3-3 ZSW3-4 1 2 3 4 4°54’ 9°44’ 14°25’ 18°55’ 83,42 F 85,85 F 88,20 F 91,37 F 115,94 F 120,24 F 125,12 F 129,88 F Hardened steel Plastic Dimensions in mm 154 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 3.0 PITCH 9.425mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 139 (0.291) Steel Hardened steel 200 (0.422) - Delrin Delrin Nm (kW) 69 (0.145) - 27 (0.058) .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W3-1. wheel M3-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØE a ØP ØA ØC throat 25 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Part number Bronze Plastic PM3-15 PM3-20 PM3-25 PM3-30 PM3-40 PM3-50 PM3-55 ZPM3-15 ZPM3-20 ZPM3-25 ZPM3-30 ZPM3-40 ZPM3-50 ZPM3-55 PM3-285 ZPM3-285 Dimensions in mm Z Teeth ØP 15 20 25 30 40 50 55 45 60 75 90 120 150 165 Centres 40,00 47,50 55,00 62,50 77,50 92,50 100,00 ØC 51 66 81 96 126 156 171 ØE ØA 54 69 84 99 129 159 174 25 25 25 25 25 25 25 Wheels available up to this size 285 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 Bronze Plastic 72,88 F 92,11 F 110,90 F 159,74 F 410,04 F On request On request 52,42 F 66,27 F 79,78 F 114,96 F 149,38 F 265,18 F 308,13 F On request On request Volume 4 2013 4 155 Worm and wheel set MODULE 4.0 Worm in steel or machined plastic PITCH 12.566mm - Machined parts - Pressure angle 20° - Right handed lead angle - Materials: Worm: Steel 13MF4 or Delrin plastic Wheel: bronze CuAl10NiFe4 or Delrin plastic - Delrin: Working temp. -50°C to +80°C .Options. - Left handed lead angle - Wheel can have from 15 to 140 teeth Ø35,00 Ø58 + 0 - 0,02 M8 Ø50 Ø50 Ø58 90 90 270 90 60 Steel worm with shaft (SW) Ø25,00 Ø35 +0 25 Ø30 90 +0,02 -0,02 90 270 Ø25,00 -0,1 Unhardened steel Ø25 H8 Pin hole Ø8 Steel (W) or plastic* (ZW) worm with bore steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 90 DELRIN discounts Qty. 1+ 6+ 30+ Disc. List -22% On request Plastic worm with shaft (ZSW) Part number Worm with bore Worm with shaft 80 7 No. of starts Lead angle Price each 1 to 5 Worm with bore Worm with shaft W4-1 W4-2 W4-3 W4-4 SW4-1 SW4-2 SW4-3 SW4-4 1 2 3 4 4°34’ 9°50’ 13°30’ 17°45’ 128,16 F 134,72 F 141,69 F 150,54 F 172,36 F 181,43 F 191,58 F 204,47 F WH4-1 WH4-2 WH4-3 WH4-4 SWH4-1 SWH4-2 SWH4-3 SWH4-4 1 2 3 4 4°34’ 9°50’ 13°30’ 17°45’ 160,46 F 169,33 F 175,11 F 186,16 F 239,04 F 243,65 F 253,37 F 260,53 F ZW4-1 ZW4-2 ZW4-3 ZW4-4 ZSW4-1 ZSW4-2 ZSW4-3 ZSW4-4 1 2 3 4 4°34’ 9°50’ 13°30’ 17°45’ 86,91 F 102,29 F 96,67 F 102,89 F 121,93 F 128,08 F 135,77 F 142,83 F Hardened steel Plastic Dimensions in mm 156 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Worm and wheel set Wheel in bronze or machined plastic MODULE 4.0 PITCH 12.566mm Torque and power indication for 50 teeth at 1000 rpm (input) WHEEL material Bronze Nm (kW) WORM material 309 (0.647) Steel Hardened steel 417 (0.873) - Delrin Delrin Nm (kW) 61 (0.129) - 154 (0.324) .Info.. - T  o order. add the number of starts on the worm to the wheel’s part number. E.g: worm W4-1. wheel M4-20/1 - The use of a delrin worm with a delrin wheel is only recommended for occasional use. The use of a delrin worm with a steel wheel is preferred. ØE a ØP ØA ØC throat 35 BRONZE discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request DELRIN discounts Part number Bronze Plastic PM4-15 PM4-20 PM4-25 PM4-30 PM4-40 PM4-50 PM4-55 PM4-60 ZPM4-15 ZPM4-20 ZPM4-25 ZPM4-30 ZPM4-40 ZPM4-50 ZPM4-55 ZPM4-60 PM4-140 ZPM-140 Dimensions in mm Qty. 1+ 6+ 30+ Disc. List -22% On request Z Teeth 15 20 25 30 40 50 55 60 140 ØP 60 80 100 120 160 200 220 240 Centres 55 65 75 85 105 125 135 145 ØC 68 88 108 128 168 208 228 248 ØE ØA 72 92 112 132 172 212 232 252 25 25 35 35 35 35 35 35 Price each 1 to 5 Bronze Plastic 135,53 F 97,59 F 157,73 F 113,55 F 440,29 F 160,54 F 698,03 F 234,64 F On request On request On request On request On request On request On request On request Wheels available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request On request Volume 4 2013 4 157 Anti-backlash wormwheel Bronze MODULE 0.5 ØC throat tip TORQUE INDICATION For 50 teeth at 1000 rpm With a standard worm Torque (Nm) 0.10 0.0002 Power (kW) - Pressure angle 20° - Right handed lead angle - Material: bronze CuAl10NiFe4 - Used with single-thread worms W0.5-1. SW0.5-1 - B  acklash is only reduced in one direction ØE ØP a ØA H8 ØM 6 .Options. Part number ABM0.5-50 ABM0.5-52 ABM0.5-55 ABM0.5-58 ABM0.5-60 ABM0.5-62 ABM0.5-65 ABM0.5-68 ABM0.5-70 ABM0.5-72 ABM0.5-75 ABM0.5-78 ABM0.5-80 ABM0.5-82 ABM0.5-85 ABM0.5-88 ABM0.5-90 ABM0.5-92 ABM0.5-95 ABM0.5-96 ABM0.5-98 ABM0.5-100 ABM0.5-110 ABM0.5-120 ABM0.5-140 ABM0.5-150 ABM0.5-160 Z Teeth 50 52 55 58 60 62 65 68 70 72 75 78 80 82 85 88 90 92 95 96 98 100 110 120 140 150 160 Dimensions in mm Pitch ØP 25,00 26,00 27,50 29,00 30,00 31,00 32,50 34,00 35,00 36,00 37,50 39,00 40,00 41,00 42,50 44,00 45,00 46,00 47,50 48,00 49,00 50,00 55,00 60,00 70,00 75,00 80,00 158 4 Volume  4 2013 6 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request - Alternative number of teeth - Alternative modules (>2) 12 Centres 18,50 19,00 19,75 20,50 21,00 21,50 22,25 23,00 23,50 24,00 24,75 25,50 26,00 26,50 27,25 28,00 28,50 29,00 29,75 30,00 30,50 31,00 33,50 36,00 41,00 43,50 46,00 HPC Throat ØC 26,00 27,00 28,50 30,00 31,00 32,00 33,50 35,00 36,00 37,00 38,50 40,00 41,00 42,00 43,50 45,00 46,00 47,00 48,50 49,00 50,00 51,00 56,00 61,00 71,00 76,00 81,00 ØE 26,50 27,50 29,00 30,50 31,50 32,50 34,00 35,50 36,50 37,50 39,00 40,50 41,50 42,50 44,00 45,50 46,50 47,50 49,00 49,50 50,50 51,50 56,50 61,50 71,50 76,50 81,50 Boss ØM 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 Bore ØA 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Price each 1 to 5 63,71 F 64,67 F 65,72 F 66,66 F 67,73 F 68,69 F 69,76 F 70,58 F 72,10 F 73,66 F 75,17 F 76,72 F 78,30 F 79,36 F 80,47 F 81,48 F 82,57 F 83,57 F 84,65 F 85,66 F 86,74 F 96,85 F 106,95 F 117,04 F 127,10 F 134,19 F 141,24 F www.hpceurope.com - +33(0)4 37 496 496 Anti-backlash wormwheel Bronze MODULE 1.0 ØC throat tip TORQUE INDICATION For 50 teeth at 1000 rpm With a standard worm 0.584 Torque (Nm) 0.0012 Power (kW) - Pressure angle 20° - Right handed lead angle - Material: bronze CuAl10NiFe4 - Used with single-thread worms. W1-1. SW1-1 - Backlash is only reduced in one direction ØE ØP a ØA H8 ØM 10 .Options. 18 8 - Alternative number of teeth - Alternative modules (>2) DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number ABM1-48 ABM1-50 ABM1-52 ABM1-54 ABM1-55 ABM1-58 ABM1-60 ABM1-62 ABM1-64 ABM1-65 ABM1-68 ABM1-70 ABM1-72 ABM1-75 ABM1-78 ABM1-80 ABM1-82 ABM1-85 ABM1-88 ABM1-90 ABM1-94 ABM1-96 ABM1-100 ABM1-110 ABM1-120 Z Teeth 48 50 52 54 55 58 60 62 64 65 68 70 72 75 78 80 82 85 88 90 94 96 100 110 120 Dimensions in mm Pitch ØP Centres 48,00 31,50 50,00 32,50 52,00 33,50 54,00 34,50 55,00 35,00 58,00 36,50 60,00 37,50 62,00 38,50 64,00 39,50 65,00 40,00 68,00 41,50 70,00 42,50 72,00 43,50 75,00 45,00 78,00 46,50 80,00 47,50 82,00 48,50 85,00 50,00 88,00 51,50 90,00 52,50 94,00 54,50 96,00 55,50 100,00 57,50 110,00 62,50 120,00 67,50 Throat ØC 50,00 52,00 54,00 56,00 57,00 60,00 62,00 64,00 66,00 67,00 70,00 72,00 74,00 77,00 80,00 82,00 84,00 87,00 90,00 92,00 96,00 98,00 102,00 112,00 122,00 +33(0)4 37 490 055 - cial2@hpceurope.com ØE 51,00 53,00 55,00 57,00 58,00 61,00 63,00 65,00 67,00 68,00 71,00 73,00 75,00 78,00 81,00 83,00 85,00 88,00 91,00 93,00 97,00 99,00 103,00 113,00 123,00 HPC Boss ØM 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 Bore ØA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Price each 1 to 5 124,35 F 129,08 F 133,83 F 138,52 F 143,26 F 148,01 F 152,74 F 158,61 F 164,58 F 170,47 F 176,38 F 182,31 F 188,09 F 193,67 F 199,26 F 204,85 F 210,47 F 215,98 F 221,64 F 227,08 F 237,85 F 248,57 F 259,35 F 324,79 F 390,24 F Volume 4 2013 4 159 s u o ne a l el ars 81 c s Mi ge 2-p.1 6 p.1 Double spur gear p.162 Anti-backlash spur gear p.166 Pinion shaft p.168 Internal gear p.172 Double spur gear Module Stainless steel (303) Z10CNF18.09 0.4 - Pressure angle 20° - Material: Stainless steel (303) Z10CNF18.09 - U shaped groove between the two sets of teeth .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) - Alternative modules (>3) s steel stainles U-cut 2.5mm wide to Root diameter ØR ØPB ØA H8 ØR ØP ØP A A 3 5 4,50 15 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number DG0.4-16/32 DG0.4-16/48 DG0.4-16/80 DG0.4-20/30 DG0,4-30/150 Dimensions in mm Z a Teeth 16 16 16 20 30 PCD ØP a 6,80 6,80 6,80 8,00 Z b Teeth 32 48 80 30 PCD ØP b 12,80 19,20 32,00 12,00 Bore ØA 3,00 3,00 3,00 4,00 ØFoot ØR 5,13 5,13 5,13 6,43 Price each 1 to 5 35,55 F 37,68 F 39,18 F 37,68 F 12,00 150 60,00 5,00 10,75 On request Gears available up to this size 162 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Steel 34C10 Double spur gear MODULE 0.5 - Pressure angle 20° - Material: Steel 34C10 - U shaped groove between the two sets of teeth .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) - Alternative modules (>3) U-cut 2.5mm wide to Root diameter ØR ØPB ØA H8 ØR ØPA 5 6 6,50 20 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number DG0.5-16/48 DG0.5-24/60 DG0,5-24/144 Z a Teeth 16 24 Dimensions in mm 24 PCD ØP a 8,50 12,00 Z b Teeth 48 60 PCD ØP b 24,00 30,00 Bore ØA 4,00 6,00 ØFoot ØR 6,45 10,45 Price each 1 to 5 43,08 F 43,62 F 12,00 144 72,00 6,00 10,45 On request Gears available up to this size +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 163 Double spur gear MODULE 1.0 Steel 34C10 - Pressure angle 20° - Material: Steel 34C10 - U shaped groove between the two sets of teeth .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) - Alternative modules (>3) U-cut 2.5mm wide to Root diameter ØR ØPB ØA H8 ØR ØPA 8 10 7,50 28 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number DG1-15/30 DG1-15/45 DG1-15/60 DG1-15/70 Z a Teeth 15 15 15 15 DG1-20/70 20 Dimensions in mm PCD ØP a 16,00 16,00 16,00 16,00 Z b Teeth 30 45 60 70 PCD ØP b 30,00 45,00 60,00 70,00 Bore ØA 8,00 8,00 8,00 8,00 ØFoot ØR 12,05 12,05 12,05 12,05 Price each 1 to 5 45,36 F 47,46 F 49,38 F 51,03 F 20,00 70 70,00 10,00 17,05 on request Gears available up to this size 164 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Double spur gear Steel 34C10 MODULE 1.5-2 - Pressure angle 20° - Material: Steel 34C10 - U shaped groove between the two sets of teeth .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) - Alternative modules (>3) U-cut 4mm wide to Root diameter ØR 1,5 MOD 2 MOD ØA H8 ØA H8 ØR ØR ØPA ØA ØPB H8 ØA ØPA ØPB H8 13 15 20 25 32 49 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 1,5 Z a Teeth 16 20 PCD ØP a 24,00 30,00 Z b Teeth 48 100 PCD ØP b 72,00 150,00 Bore ØA 10 10 2 20 15 15 30,00 30,00 30,00 120 45 60 180,00 90,00 120,00 10 15 15 19,00 24,00 24,00 on request 137,52 F 249,69 F 20 40,00 120 240,00 15 34,00 on request Part number Module DG1.5-16/48 DG1.5-20/100 DG1,5-20/120 DG2-15/45 DG2-15/60 DG2-20/120 Dimensions in mm Gears available up to this size Gears available up to this size +33(0)4 37 490 055 - cial2@hpceurope.com HPC ØFoot Price each ØR 1 to 5 13,00 96,61 F 19,00 203,05 F Volume 4 2013 4 165 Anti-backlash spur gear Stainless steel MODULE 0.5 - 1 - Backlash is only reduced in one direction - Pressure angle 20° - Material: stainless steel (303) Z10CNF18,09 - Springs are placed in the Ø6 H8 gap between two gears of the same size axially secured with a circlip Screw M3 ØP Ø16 ØD s steel stainles .Assembly. - Offset the two discs by several degrees to compress the springs and reduce the backlash 3 8 8 Ø1.5 pin hole on 1 side 19 .Options. 50 TEETH x 1000 rpm TORQUE - A  lternative number AND POWER MODULE MODULE MODULE of teeth INDICATION 0.5 0.8 1 - A  lternative modules 0,0658 0,1482 0,2636 Torque (Nm) (>4) Power(kW) 0,0068 0,0156 0,0276 Part number ABS0.5-56 ABS0.5-60 ABS0.5-72 ABS0.5-84 ABS0.5-96 ABS0.5-108 ABS0.5-120 ABS0.5-132 ABS0.5-144 ABS0.8-48 ABS0.8-50 ABS0.8-64 ABS0.8-72 ABS0.8-80 ABS0.8-88 ABS0.8-96 ABS0.8-100 ABS1-48 ABS1-60 ABS1-72 ABS1-80 ABS1-84 MODULE 0,5 MODULE 0,8 MODULE 1 Dimensions in mm 166 4 Volume  4 2013 Z Teeth 56 60 72 84 96 108 120 132 144 48 50 64 72 80 88 96 100 48 60 72 80 84 HPC Pitch ØP 28,00 30,00 36,00 42,00 48,00 54,00 60,00 66,00 72,00 38,40 40,00 51,20 57,60 64,00 70,40 76,80 80,00 48,00 60,00 72,00 80,00 84,00 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request External ØD 29,00 31,00 37,00 43,00 49,00 55,00 61,00 67,00 73,00 40,00 41,60 52,80 59,20 65,60 72,00 78,40 81,60 50,00 62,00 74,00 82,00 86,00 Price each 1 to 5 77,61 F 83,21 F 88,30 F 88,87 F 93,90 F 98,98 F 104,01 F 109,08 F 114,25 F 87,02 F 88,87 F 93,34 F 99,08 F 103,00 F 106,79 F 108,77 F 112,68 F 110,11 F 114,45 F 116,64 F 120,54 F 126,07 F www.hpceurope.com - +33(0)4 37 496 496 Anti-backlash spur gear Steel MODULE 0.5 - 1 - The anti-backlash mechanism only works in one direction - Pressure angle 20° - Material: steel 34C10 - Springs are placed in the gap Ø6 H8 between two gears of the same size axially secured with a circlip Screw M3 ØP Ø16 ØD .Assembly. - Offset the two discs by several degrees to compress the springs and reduce the backlash .Options. - Alternative number of teeth - Alternative modules (>4) MODULE 0,5 MODULE 0,8 MODULE Dimensions in mm 1 8 8 Ø1.5 pin hole on 1 side 19 50 TEETH x 1000 rpm TORQUE AND POWER MODULE MODULE MODULE INDICATION 0,5 0,8 1 0,0658 0,1482 0,2636 Torque (Nm) Power(kW) 0,0068 0,0156 0,0276 Part number AB0.5-56 AB0.5-60 AB0.5-72 AB0.5-84 AB0.5-96 AB0.5-108 AB0.5-120 AB0.5-132 AB0.5-144 AB0.8-48 AB0.8-50 AB0.8-64 AB0.8-72 AB0.8-80 AB0.8-88 AB0.8-96 AB0.8-100 AB1-48 AB1-60 AB1-72 AB1-80 AB1-84 3 Z Teeth 56 60 72 84 96 108 120 132 144 48 50 64 72 80 88 96 100 48 60 72 80 84 +33(0)4 37 490 055 - cial2@hpceurope.com Pitch ØP 28,00 30,00 36,00 42,00 48,00 54,00 60,00 66,00 72,00 38,40 40,00 51,20 57,60 64,00 70,40 76,80 80,00 48,00 60,00 72,00 80,00 84,00 HPC DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request External ØD 29,00 31,00 37,00 43,00 49,00 55,00 61,00 67,00 73,00 40,00 41,60 52,80 59,20 65,60 72,00 78,40 81,60 50,00 62,00 74,00 82,00 86,00 Price each 1 to 5 59,07 F 59,59 F 60,22 F 60,73 F 61,15 F 62,03 F 63,20 F 64,80 F 65,36 F 60,40 F 61,66 F 62,29 F 62,89 F 63,94 F 64,98 F 65,57 F 66,41 F 63,53 F 68,49 F 70,99 F 74,20 F 76,34 F Volume 4 2013 4 167 Pinion shaft MODULE Steel 34C10 0.25-1.25 - Pressure angle 20° - Material: steel 34C10 .Options. - Alternative number of teeth - A  lternative materials (delrin, stainless steel..) - Other lengths and diameters ØD + 0,000 - 0,025mm ØP L W (2xL) - W DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number DT0.25-15 DT0.25-18 DT0.3-16 DT0.3-20 DT0.4-18 DT0.4-27 DT0.5-16 DT0.5-20 DT0.5-24 DT0.8-15 DT0.8-16 DT0.8-18 DT1-14 DT1-16 DT1-20 DT1.25-12 DT1.25-15 DT1.25-18 Module Z Teeth 0,25 0,25 0,3 0,3 0,4 0,4 0,5 0,5 0,5 0,8 0,8 0,8 1 1 1 1,25 1,25 1,25 15 18 16 20 18 27 16 20 24 15 16 18 14 16 20 12 15 18 Dimensions in mm 168 4 Volume  4 2013 ØP 3,75 4,50 4,80 6,00 7,20 10,80 8,00 10,00 12,00 12,00 12,80 14,40 14,00 16,00 20,00 15,00 18,75 22,50 HPC L 20 20 20 20 25 25 25 25 25 32 32 32 38 38 38 50 50 50 W 2,50 2,50 2,50 2,50 3,00 3,00 3,00 3,00 3,00 5,00 5,00 5,00 8,00 8,00 8,00 10,00 10,00 10,00 ØD 3 3 3 3 5 5 6 6 6 8 8 8 10 10 10 12 12 12 Price each 1 to 5 33,40 F 36,12 F 33,40 F 36,12 F 34,42 F 37,08 F 36,07 F 36,76 F 38,62 F 40,23 F 42,08 F 43,04 F 48,71 F 50,25 F 52,06 F 50,44 F 51,38 F 52,40 F www.hpceurope.com - +33(0)4 37 496 496 Pinion shaft MODULE Steel 34C10 1.5-4 - Pressure angle 20° - Material: Steel 34C10 .Options. - Different number of teeth - Other materials (delrin, stainless steel...) - Other lengths and diameters ØD + 0,000 - 0,025mm ØP W L (2xL) - W DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number Module DT1.5-13 1,5 DT1.5-16 1,5 DT1.5-20 1,5 DT2-13 2 DT2-16 2 DT2-18 2 DT2.5-12 2,5 DT2.5-15 2,5 DT2.5-18 2,5 DT3-12 3 DT3-14 3 DT3-16 3 DT4-12 4 DT4-15 4 DT4-18 4 Dimensions in mm Z Teeth 13 16 20 13 16 18 12 15 18 12 14 16 12 15 18 ØP 19,50 24,00 30,00 26,00 32,00 36,00 30,00 37,50 45,00 36,00 42,00 48,00 48,00 60,00 72,00 +33(0)4 37 490 055 - cial2@hpceurope.com L 76 76 76 76 76 76 100 100 100 108 108 108 115 115 115 HPC W 12 12 12 20 20 20 25 25 25 32 32 32 38 38 38 ØD 15 15 15 20 20 20 20 20 20 22 22 22 30 30 30 Price each 1 to 5 51,10 F 52,44 F 54,12 F 55,93 F 61,55 F 68,21 F 69,31 F 73,50 F 77,60 F 97,13 F 100,05 F 109,26 F 123,53 F 128,77 F 135,06 F Volume 4 2013 4 169 Pinion shaft MODULE 0.25-0.8 Stainless steel - Pressure angle 20° - Material: Stainless steel (303) Z10CNF18.09 .Options. s steel - Alternative number of teeth - A  lternative materials (delrin, stainless steel..) - Other lengths and diameters stainles ØD + 0,000 - 0,025mm ØP W L (2xL) - W DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number Module DST0.25-15 0,25 DST0.25-18 0,25 DST0.3-16 0,3 DST0.3-20 0,3 DST0.4-18 0,4 DST0.4-27 0,4 DST0.5-16 0,5 DST0.5-20 0,5 DST0.5-24 0,5 DST0.8-15 0,8 DST0.8-16 0,8 DST0.8-18 0,8 Dimensions in mm Z Teeth 15 18 16 20 18 27 16 20 24 15 16 18 170 4 Volume  4 2013 ØP 3,75 4,50 4,80 6,00 7,20 10,80 8,00 10,00 12,00 12,00 12,80 14,40 HPC L 20 20 20 20 25 25 25 25 25 32 32 32 W 2,50 2,50 2,50 2,50 3,00 3,00 3,00 3,00 3,00 5,00 5,00 5,00 ØD 3 3 3 3 5 5 6 6 6 8 8 8 Price each 1 to 5 49,62 F 51,11 F 49,62 F 51,11 F 51,32 F 51,93 F 53,97 F 55,41 F 57,57 F 60,07 F 60,31 F 64,21 F www.hpceurope.com - +33(0)4 37 496 496 Pinion shaft MODULE Stainless steel 1-2 - Pressure angle 20° - Material: Stainless steel (303) Z10CNF18.09 .Options. s steel - Alternative number of teeth - Alternative materials (delrin, stainless steel..) - Other lengths and diameters stainles ØD + 0,000 - 0,025mm ØP W L (2xL) - W DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Module Part number DST1-14 1 DST1-16 1 DST1-20 1 DST1.25-12 1,25 DST1.25-15 1,25 DST1.25-18 1,25 DST1.5-13 1,5 DST1.5-16 1,5 DST1.5-20 1,5 DST2-13 2 DST2-16 2 DST2-18 2 Dimensions in mm Z Teeth 14 16 20 12 15 18 13 16 20 13 16 18 ØP 14,00 16,00 20,00 15,00 18,75 22,50 19,50 24,00 30,00 26,00 32,00 36,00 +33(0)4 37 490 055 - cial2@hpceurope.com L 38 38 38 50 50 50 76 76 76 76 76 76 HPC W 8 8 8 10 10 10 12 12 12 20 20 20 ØD 10 10 10 12 12 12 15 15 15 20 20 20 Price each 1 to 5 72,80 F 74,33 F 77,55 F 98,67 F 99,88 F 108,56 F 115,88 F 117,47 F 119,74 F 122,52 F 130,80 F 140,80 F Volume 4 2013 4 171 Internal gear Steel or machined plastic Module 0.4 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. -  Alternative number of teeth (minimum 100 teeth) - A  lternative materials (stainless steel, brass..) IN: Steel ZIN: Plastic .Accessories. - S  pur gears with the same module eg G0.4.., ZG0.4.. ØM ØD ± 0,05 +0,00 -0,05 ØA ØP 3 2 5 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL IN IN0.4-100 IN0.4-120 IN0.4-150 IN0.4-200 PLASTIC ZIN ZIN0.4-100 ZIN0.4-120 ZIN0.4-150 ZIN0.4-200 Z Teeth 100 120 150 200 PCD ØP 40 48 60 80 IN0,4-400 ZIN0,4-400 400 160 Part number Internal ØA ØD 39,2 150 47,2 75 53,2 75 79,2 125 Gears available up to this size Dimensions in mm 172 4 Volume  4 2013 HPC 159,2 225 Qty. 1+ 6+ Disc. List -22% 30+ On request Boss ØM 55 70 70 100 Price each 1 to 5 STEEL IN PLASTIC ZIN 45,15 F 32,50 F 50,51 F 36,30 F 57,57 F 41,39 F 76,58 F 55,08 F 200 on request on request www.hpceurope.com - +33(0)4 37 496 496 Internal gear Steel or machined plastic Module 0.8 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - A  lternative number of teeth (minimum 75 teeth) - Alternative materials (stainless steel, brass..) IN: Steel .Accessories. ZIN: Plastic - S  pur gears with the same module eg G0.8.., ZG0.8.. ØM ØD ± 0,05 +0,00 -0,05 ØA ØP 6 9 steel discounts PLASTIc discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request 3 Qty. 1+ 6+ Disc. List -22% 30+ On request STEEL IN IN0.8-75 IN0.8-80 IN0.8-100 PLASTIC ZIN ZIN0.8-75 ZIN0.8-80 ZIN0.8-100 Z Teeth 75 80 100 number PCD Part Internal ØP ØA ØD 60 58,4 75 64 62,4 100 80 78,4 100 Boss ØM 70 74 94 Price each 1 to 5 PLASTIC ZIN 55,77 F 40,15 F 58,31 F 41,96 F 64,83 F 46,66 F IN0.8-250 ZIN0.8-250 250 200 225 on request on request Dimensions in mm   Gears available up to this size 198,4 +33(0)4 37 490 055 - cial2@hpceurope.com 250 HPC Volume 4 2013 4 173 Internal gear Steel or machined plastic MODULE 1.0 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - A  lternative number of teeth (minimum 58 teeth) - A  lternative materials (stainless steel, brass..) IN: Steel .Accessories. - S  pur gears with the same module eg G1.., ZG1.. ZIN: Plastic ØM ØD ± 0,05 +0,00 -0,05 ØA ØP 8 3 11 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Qty. 1+ 6+ Disc. List -22% 30+ On request STEEL IN IN1-58 IN1-60 IN1-100 PLASTIC ZIN ZIN1-58 ZIN1-60 ZIN1-100 Z Teeth 58 60 100 number PCD Part Internal ØP ØA ØD 58 56 100 60 58 100 100 98 150 Boss ØM 94 94 125 Price each 1 to 5 STEEL IN PLASTIC ZIN 60,97 F 43,90 F 61,75 F 44,45 F 105,97 F 76,29 F IN1-200 ZIN1-200 200 200 225 on request on request   Gears available up to this size Dimensions in mm 174 4 Volume  4 2013 HPC 198 250 www.hpceurope.com - +33(0)4 37 496 496 Internal gear Steel or machined plastic MODULE 1.25 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - A  lternative number of teeth (minimum 58 teeth) - Alternative materials (stainless steel, brass..) .Accessories. - S  pur gears with the same module eg G1.25.., ZG1.25.. IN: Steel ZIN: Plastic ØM ØD ± 0,05 +0,00 -0,05 ØA ØP 12 3 15 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Qty. 1+ 6+ Disc. List -22% 30+ On request PLASTIC ZIN STEEL IN IN1.25-51 ZIN1.25-51 IN1.25-60 ZIN1.25-60 IN1.25-100 ZIN1.25-100 Z Teeth 51 60 100 number PCD Part Internal ØP ØA ØD 63,75 61,75 100 75,00 72,50 100 125,00 122,50 175 Price each 1 to 5 Boss STEEL IN PLASTIC ZIN ØM 94 62,55 F 45,04 F 94 67,05 F 48,28 F 150 117,31 F 84,46 F IN1,25-160 ZIN1,25-160 160 200,00 197,50 225 Dimensions in mm Gears available up to this size +33(0)4 37 490 055 - cial2@hpceurope.com 250 HPC on request on request Volume 4 2013 4 175 Internal gear Steel or machined plastic MODULE 1.5 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - Alternative number of teeth - A  lternative materials (stainless steel, brass..) IN: Steel .Accessories. - S  pur gears with the same module eg G1.5.., ZG1.5.. ZIN: Plastic ØM ØD ± 0,05 +0,00 -0,05 ØA ØP 12 3 15 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Qty. 1+ 6+ Disc. List -22% 30+ On request STEEL IN IN1.5-41 IN1.5-60 IN1.5-100 PLASTIC ZIN ZIN1.5-41 ZIN1.5-60 ZIN1.5-100 Z Teeth 41 60 100 number PCD Part Internal ØP ØA ØD 61,5 58 100 90,0 87 150 150,0 147 200 Boss ØM 94 125 175 Price each 1 to 5 STEEL IN PLASTIC ZIN 69,58 F 50,02 F 106,97 F 76,93 F 181,05 F 139,57 F IN1,5-120 ZIN1,5-120 120 180,0 200 on request on request   Gears available up to this size Dimensions in mm 176 4 Volume  4 2013 HPC 177 250 www.hpceurope.com - +33(0)4 37 496 496 Internal gear Steel or machined plastic MODULE 2.0 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) IN: Steel .Accessories. ZIN: Plastic - S  pur gears with the same module eg G2.., ZG2.. ØM ØD +0,00 -0,05 +/- 0,05 ew! n ØA ØP 12 3 15 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Qty. 1+ 6+ Disc. List -22% 30+ On request STEEL IN IN2-40 IN2-60 IN2-80 IN2-100 PLASTIC ZIN ZIN2-40 ZIN2-60 ZIN2-80 ZIN2-100 Z Teeth 40 60 80 100 number PCD Part Internal ØP ØA 80 76 120 116 160 156 200 196 ØD 150 175 220 250 Boss ØM 125 150 200 220 Price each 1 to 5 STEEL IN PLASTIC ZIN 96,05 F 67,23 F 149,65 F 104,75 F 196,94 F 137,86 F 253,33 F 177,33 F IN2-110 ZIN2-110 110 220 280 250 295,14 F 206,60 F Dimensions in mm   Gears available up to this size 216 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 177 Internal gear Steel or machined plastic MODULE 2.5 ! new - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. IN: Steel - Alternative number of teeth - Alternative materials (stainless steel, brass..) ZIN: Plastic .Accessories. - S  pur gears with the same module eg G2,5.., ZG2,5.. ØM ØD +0,00 -0,05 +/- 0,05 ØA ØP 12 3 15 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL IN IN2.5-56 IN2.5-60 IN2.5-75 PLASTIC ZIN ZIN2.5-56 ZIN2.5-60 ZIN2.5-75 IN2,5-88 ZIN2,5-88 Z Teeth 56 60 75 Dimensions in mm 178 4 Volume  4 2013 30+ On request number PCD Part Internal ØP ØA ØD 140,0 135,0 200 150,0 145,0 200 187,5 182,5 250 Price each 1 to 5 Boss STEEL IN PLASTIC ZIN ØM 175 177,81 F 124,47 F 175 200,21 F 140,14 F 220 263,47 F 184,43 F 220,0 250   Gears available up to this size 88 Qty. 1+ 6+ Disc. List -22% HPC 215,0 280 301,24 F 210,87 F www.hpceurope.com - +33(0)4 37 496 496 Internal gear Steel or machined plastic MODULE 3.0 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. - Alternative number of teeth - Alternative materials (stainless steel, brass..) IN: Steel .Accessories. ZIN: Plastic - S  pur gears with the same module eg G3.., ZG3.. ØD ØM +/- 0,05 ! new +0,00 -0,05 ØA ØP 20 10 30 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL IN IN3-50 IN3-60 IN3-66 PLASTIC ZIN ZIN3-50 ZIN3-60 ZIN3-66 IN3-74 ZIN3-74 Dimensions in mm Z Teeth 50 60 66 Qty. 1+ 6+ Disc. List -22% number PCD Part Internal ØP ØA ØD 150 144 220 180 174 250 198 192 250 Price each 1 to 5 Boss STEEL IN PLASTIC ZIN ØM 200 204,48 F 143,13 F 220 230,24 F 161,17 F 220 302,99 F 212,09 F 222 250   Gears available up to this size 74 30+ On request 216 +33(0)4 37 490 055 - cial2@hpceurope.com 280 HPC 322,67 F 242,50 F Volume 4 2013 4 179 Internal gear Steel or machined plastic MODULE 4.0 - Pressure angle 20° - Materials: steel 34C10 or delrin plastic (machined parts) .Options. IN: Steel - Alternative number of teeth - A  lternative materials (stainless steel, brass..) ZIN: Plastic .Accessories. - S  pur gears with the same module eg G4.., ZG4.. ! new ØM ØD +0,00 -0,05 +/- 0,05 ØA ØP 20 30 PLASTIc discounts steel discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL IN IN4-40 IN4-45 IN4-50 PLASTIC ZIN ZIN4-40 ZIN4-45 ZIN4-50 IN4-55 ZIN4-55 Z Teeth 40 45 50 number PCD Part Internal ØP ØA ØD 160 152 230 180 172 250 200 192 280   Gears available up to this size Dimensions in mm 180 4 Volume  4 2013 10 55 220 HPC 212 280 Qty. 1+ 6+ Disc. List -22% 30+ On request Price each 1 to 5 Boss STEEL IN PLASTIC ZIN ØM 200 219,82 F 153,87 F 220 247,51 F 173,25 F 250 308,96 F 228,00 F 250 330,54 F 260,69 F www.hpceurope.com - +33(0)4 37 496 496 Technical information for racks Approximate size of rack teeth Pressure angle 20° Module 0.25 Module 0.3 Module 0.35 Module 0.4 Module 0.5 Module 0.6 Module 0.8 Module 1 Module 1.25 Module 1.5 Module 2 Module 2.5 Module 3 +33(0)4 37 490 055 - cial2@hpceurope.com Module 4 HPC Volume 4 2013 4 181 s 99 k c Ra -p.1 4 .18 p Steel spur rack p.184 Stainless steel spur rack s Stain e l e e l s st p.185 Spur round rack s Stain e l e e l s st p.189 Flexible racks p.192 Machined plastic spur rack p.198 Moulded plastic spur rack p.196 Narrow spur rack Module 0.25-2.0 Steel - Pressure angle 20° - Max length from 400 to 1800 depending on module - 1 metre lengths can be joined end to end - Materials: Module 0.25 to 0.7 mild steel Module 0.8 to 2.0 steel 60C40 - Max. pitch error up to module 0.7: 1mm/300mm Max. pitch error from module 0.8: 0.1mm/300mm ack Spur r .Option. - O  ther lengths available for quantities of 5 or more, please contact us H P L W discounts Qty. 1+ 6+ 20+ Disc. List -5% On request Part number Module R0.25-400 0,25 R0.4-400 0,4 R0.5-400 0,5 R0.7-400 0,7 R0.8-1000 0,8 R0.8-1800 0,8 R1-1000 1 R1-1800 1 R1.25-1000 1,25 R1.25-1800 1,25 RR1.5-1000 1,5 RR1.5-1800 1,5 RR1.75-1000 1,75 RR1.75-1800 1,75 RR2-1000 2 RR2-1800 2 RC1-400 1mm CP RC2-400 2mm CP P 8,75 11,60 11,50 11,30 11,20 11,20 14,00 14,00 13,75 13,75 16,50 16,50 16,25 16,25 16,00 16,00 11,67 11,36 W 4 6 6 6 6 6 8 8 8 8 18 18 18 18 18 18 6 6 *Depending on availability - Dimensions in mm 184 4 Volume  4 2013 HPC H 9 12 12 12 12 12 15 15 15 15 18 18 18 18 18 18 12 12 L 400 400 400 400 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 400 400 Stock* 4 4 4 - 4 - 4 4 4 4 4 4 - - 4 - - - Price each 1 to 5 42,92 F 44,37 F 56,28 F 47,39 F 124,00 F 200,61 F 128,16 F 209,76 F 137,93 F 225,83 F 141,87 F 232,21 F 151,00 F 247,17 F 152,05 F 254,94 F on request on request www.hpceurope.com - +33(0)4 37 496 496 Stainless steel narrow spur rack Stainless steel Module 0.25-2.0 - Pressure angle 20° - Max. pitch error 1mm/300mm - Material: Stainless steel Z10CNF18.09 (303) s stainle l s stee .Option. - Alternative lengths available ack Spur r H P L  W discounts Part number Module SR0,25 0,25 SR0,4 0,40 SR0,5 0,50 SR0,7 0,70 SR0,8 0,80 SR1 1,00 SR1,25 1,25 SR1,5 1,50 SR1,75 1,75 SR2 2,00 SRC1 1mm CP SRC2 2mm CP Dimensions in mm P 8,75 11,60 11,50 11,30 11,20 14,00 13,75 16,50 16,25 16,00 11,67 11,36 W 4,00 6,00 6,00 6,00 6,00 8,00 8,00 18,00 18,00 18,00 6,00 6,00 +33(0)4 37 490 055 - cial2@hpceurope.com H 9 12 12 12 12 15 15 18 18 18 12 12 HPC Qty. 1+ 6+ 20+ Disc. List -5% On request Price each Stock* L 1 to 5 400 4 93,89 F 400 - 115,78 F 400 4 119,77 F 400 - 123,61 F 400 4 127,41 F 400 4 136,60 F 400 - 141,68 F 400 - 162,20 F 400 - 164,05 F 400 4 169,34 F 400 on request - 400 on request - Volume 4 2013 4 185 Metric section rack Module 1.0-6.0 - - - - Steel  acks can joined end to end R Pressure angle 20° MR = square section MMR = rectangular section .Options. - O  ther lengths available for quantities of 10 or more, please contact us Spur rack H P L W DISCOUNTS Qty. 1+ 6+ 10+ 20+ 30+ 40+ Disc. List -10% -20% -30% -40% On request Part number Module MR1-1000 1 MR1.25-1000 1,25 MR1.25-2000 1,25 MR1.5-1000 1,5 MR1.5-2000 1,5 MR1.75-2000 1,75 MR2-1000 2 MR2-2000 2 MR2.5-1000 2,5 MR2.5-2000 2,5 MR3-1000 3 MR3-2000 3 MMR4-1000 4 MMR4-2000 4 MMR5-1000 5 MMR5-2000 5 MMR6-1000 6 MMR6-2000 6 W (mm) 10 15 15 15 15 15 20 20 25 25 30 30 40 40 50 50 60 60 H (mm) 10 15 15 15 15 15 20 20 25 25 30 30 25 25 30 30 40 40 *Depending on availability - Dimensions in mm 186 4 Volume  4 2013 HPC Primitive line P (mm) 9,00 13,75 13,75 13,50 13,50 13,25 18,00 18,00 22,50 22,50 27,00 27,00 21,00 21,00 25,00 25,00 34,00 34,00 Length L (mm) 999 1001 1997 997 1997 2002 999 1997 997 2002 999 1997 1005 2002 1005 2010 999 1997 Stock* 4 4 4 4 4 - 4 4 4 4 4 4 4 4 4 4 - - Price each 1 to 5 43,66 F 35,13 F 82,81 F 35,13 F 82,81 F 82,81 F 29,81 F 63,53 F 42,60 F 88,59 F 54,85 F 115,57 F 90,57 F 212,87 F 149,22 F 283,20 F 226,58 F 430,13 F www.hpceurope.com - +33(0)4 37 496 496 Stainless steel metric section rack Stainless steel Module 1.0-3.0 - Racks can be joined end to end - Pressure angle 20° - Material: drawn stainless steel 304 s stainle l s e ste .Option. - O  ther lengths available for quantities of 10 or more, please contact us ack Spur r H P L W discounts Part number Module MRS1-1000 1,0 MRS1.5-1000 1,5 MRS2-1000 2,0 MRS2.5-1000 2,5 MRS3-1000 3,0 W (mm) 10 15 20 25 30 H (mm) 10 15 20 25 30 *Depending on availability - Dimensions in mm Primitive line P (mm) 9,00 13,50 18,00 22,50 27,00 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 20+ Disc. List -12% On request Length L (mm) 999 999 999 999 999 Stock* Stock* 4 4 4 - 4 Price each 1 to 5 114,49 F 191,88 F 209,74 F 297,53 F 368,18 F Volume 4 2013 4 187 Imperial section rack Steel Module 0.8-5.0 - Pressure angle 20° - Maximum length 1800mm - 1 metre lengths can be joined end to end - Materials: steel 60C40 - Max. pitch error: 0.1mm/300mm .Options. ack Spur r - O  ther lengths available for quantities of 10 or more, please contact us P Allowable load on teeth assuming a 30 tooth gear used for 12 hours per day at 10 rpm L CR0,8 34 kg CR1 56 kg CR1,25 65 kg CR1,5 111 kg CR1,75 127 kg CR2 136 kg CR2,5 226 kg CR3 326 kg CR4 500 kg CR5 877 kg CCR6 1180 kg Part number Module CR0.8-1000 0,8 CR0.8-1800 0,8 CR1-1000 1 CR1-1800 1 CR1.25-1000 1,25 CR1.25-1800 1,25 CR1.5-1000 1,5 CR1.5-1800 1,5 CR1.75-1000 1,75 CR1.75-1800 1,75 CR2-1000 2 CR2-1800 2 CR2.5-1000 2,5 CR2.5-1800 2,5 CR3-1000 3 CR3-1800 3 CR4-1000 4 CR4-1800 4 CR5-1000 5 CR5-1800 5 H W DISCOUNTS Qty. 1+ 6+ 20+ 40+ Disc. List -5% -10% On request P 8,72 8,72 11,70 11,70 11,45 11,45 17,55 17,55 17,30 17,30 17,05 17,05 22,90 22,90 28,75 28,75 34,10 34,10 45,80 45,80 W 9,52 9,52 12,70 12,70 12,70 12,70 19,05 19,05 19,05 19,05 19,05 19,05 25,40 25,40 31,75 31,75 38,10 38,10 50,80 50,80 *Depending on availability - Dimensions in mm 188 4 Volume  4 2013 HPC H 9,52 9,52 12,70 12,70 12,70 12,70 19,05 19,05 19,05 19,05 19,05 19,05 25,40 25,40 31,75 31,75 38,10 38,10 50,80 50,80 L 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 1000 1828 Stock* 4 - 4 4 4 4 4 4 - - 4 - 4 4 4 - 4 - 4 - Price each 1 to 5 79,15 F 136,07 F 81,79 F 140,61 F 88,00 F 151,28 F 94,49 F 162,43 F 96,33 F 165,60 F 99,35 F 170,77 F 121,75 F 209,29 F 126,31 F 381,03 F 176,42 F 367,77 F 226,75 F 706,88 F www.hpceurope.com - +33(0)4 37 496 496 Spur round rack Stainless steel Module 0.25-1.5 - - - -  achined parts M Pressure angle 20° Max. pitch error 1mm/300mm Material: stainless steel (303) Z10 CNF 18.09 s steel stainles .Options. ack Spur r - Other lengths are available P L H +0 ØD -0,02 discounts Part number Module TR0,25 0,25 TR0,4 0,40 TR0,5 0,50 TR0,7 0,70 TR0,8 0,80 TR1 1,00 TR1,25 1,25 TR1,5 1,50 TRC1 1mm CP TRC2 2mm CP P (mm) 5,30 8,80 8,70 9,80 9,70 9,50 11,75 16,00 8,88 8,56 ØD (mm) 6,00 10,00 10,00 12,00 12,00 12,00 15,00 20,00 10,00 10,00 *Depending on availability - Dimensions in mm Qty. 1+ 6+ 20+ Disc. List -5% On request H (mm) 5,55 9,20 9,20 10,50 10,50 10,50 13,00 17,50 9,20 9,20 +33(0)4 37 490 055 - cial2@hpceurope.com L (mm) 400 400 400 400 400 400 400 400 400 400 HPC Stock* 4 - 4 4 4 4 4 4 - - Price each 1 to 5 58,61 F 60,65 F 62,69 F 64,68 F 66,68 F 73,26 F 79,78 F 171,77 F 58,61 F 59,89 F Volume 4 2013 4 189 Spur round rack Module 1.0-6.0 Steel - Pressure angle 20° - Diameter tolerance h11 - Material: drawn steel A60 ack Spur r h L ØD h11 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part number TRM1-1000 TRM1.5-1000 TRM2-1000 TRM2.5-1000 TRM3-1000 TRM4-1000 TRM5-1000 TRM6-1000 Module 1 1,5 2 2,5 3 4 5 6 h (mm) 9,00 13,50 18,00 22,50 27,00 36,00 45,00 54,00 *Depending on availability - Dimensions in mm 190 4 Volume  4 2013 HPC ØD (mm) 10 15 20 25 30 40 50 60 L (mm) 999 999 999 997 999 1005 1005 999 Stock* 4 4 4 4 4 4 - - Price each 1 to 5 92,20 F 135,34 F 132,36 F 168,07 F 170,29 F 211,94 F 265,54 F 357,79 F www.hpceurope.com - +33(0)4 37 496 496 Spur round rack Stainless steel Module 1.0-5.0 - Pressure angle 20° - Diameter tolerance h11 - Material: drawn stainless steel 304 s steel stainles ! New ack Spur r h L ØD h11 DISCOUNTS Qty 1+ 6+ 10+ 15+ 20+ Disc. List -15% -20% -25% On request Part number TRM1-1000/SS TRM1.5-1000/SS TRM2-1000/SS TRM2.5-1000/SS TRM3-1000/SS TRM4-1000/SS TRM5-1000/SS Module 1 1,5 2 2,5 3 4 5 h (mm) 9,00 13,50 18,00 22,50 27,00 36,00 45,00 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com ØD (mm) 10 15 20 25 30 40 50 HPC L (mm) 999 999 999 997 999 1005 1005 Price each 1 to 5 104,50 F 150,96 F 146,88 F 199,52 F 240,69 F 348,38 F 617,57 F Volume 4 2013 4 191 Plastic flexible rack Moulded Duracon DR -  The flexible rack should be used with a 20 tooth pinion from the same range (see ZGDR gears) - Length 2000mm (+/- 10mm) - Minimum radius of curvature: 150mm - Pressure angle 20° -  Datum reference: bottom surface .Accessories. - Rack clamp SRS - Rack guide rail ARL - Gear ZGDR .Info.. - P  lastic racks are less accurate than metal racks and should not be used where accurate positioning is required. B A E F D C G H discounts 30+ Qty. 1+ 6+ 10+ 20+ Disc. List -5% -10% -15% On request Part number Module DR0.8-2000 0,8 DR1-2000 1,0 DR1.5-2000 1,5 DR2-2000 2,0 Dimensions in mm Length (mm) A 2000 3 2000 4 2000 5 2000 6 192 4 Volume  4 2013 B 3,8 5,0 6,5 6,0 C 3,3 4,3 5,7 7,0 HPC D 2,5 3,3 4,2 5,0 E 1,5 2,0 2,3 2,5 Allowable bending Weight Price each F G H strength (N) kg 1 to 5 0,7 3,7 8 111,8 0,10 83,46 F 0,9 4,9 10 160,9 0,15 107,82 F 1,0 8,0 12 161,4 0,20 135,71 F 1,1 10,1 15 264,9 0,30 163,51 F www.hpceurope.com - +33(0)4 37 496 496 Plastic flexible rack Clamp and guide rail ARL SRS - Accessories for flexible rack - Material: Guide: aluminium A6063S-T5 Clamps: SS400 unichromic plating ARL A B E C F D SRS B Ø 4.2 D C E A discounts 30+ Qty. 1+ 6+ 10+ 20+ Disc. List -5% -10% -15% On request Rack guide rail Part number ARL-0.8 ARL-1 ARL-1.5 ARL-2 Length (mm) 1000 1000 1000 1000 Rack clamp A 10,3 12,3 14,3 17,3 Part number For rack SRS1/B DR0.8-2000 et DR1-2000 SRS2/B DR1.5-2000 et DR2-2000 Dimensions in mm B 4,4 5,6 7,2 8,8 A 10,2 11,4 C 4,7 5,2 5,5 6,2 B 8 8 +33(0)4 37 490 055 - cial2@hpceurope.com D 2,0 2,0 2,0 2,5 C 4,5 5,6 HPC E 1,7 2,2 2,5 2,7 D 2,7 3,9 F 8,3 10,3 12,3 15,3 E 1,2 1,4 Price each 1 to 5 30,32 F 34,71 F 38,86 F 51,48 F Qty per Price per packet batch 10 15,44 F 10 15,44 F Volume 4 2013 4 193 Thin spur gear To be used with rack DR ZGDR - - - - -  achined parts M Quality standard 9 Pressure angle 20° Material: Delrin Working temp. -50°C to +80°C iAdvantagesi - D  esigned specially to work with DR flexible racks. ØM ØA H8 B C 16 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Z Part number Teeth ØP PCD ZGDR0.8-20 ZGDR0.8-25 ZGDR0.8-30 ZGDR0.8-40 20 25 30 40 ZGDR1-20 ZGDR1-25 ZGDR1-30 ZGDR1-40 20 25 30 40 Module 0,8 Module 1 Dimensions in mm ØD Outside ØM Boss ØA Bore 16,00 20,00 24,00 32,00 17,60 21,60 25,60 33,60 14 14 15 15 4 4 5 5 20,00 25,00 30,00 40,00 22,00 27,00 32,00 42,00 18 18 18 18 6 6 6 6 194 4 Volume  4 2013 HPC C Price each 1 to 5 4 4 4 4 6 6 6 6 17,90 F 18,76 F 19,59 F 22,14 F 5 5 5 5 5 5 5 5 15,75 F 16,94 F 19,24 F 27,33 F B www.hpceurope.com - +33(0)4 37 496 496 Thin spur gear To be used with rack DR ZGDR - - - - -  achined parts M Quality standard 9 Pressure angle 20° Material: Delrin Working temp. -50°C to +80°C iAdvantagesi - D  esigned specially to work with DR flexible racks. ØM ØA H8 B C 16 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Part number Module 1.5 Z Teeth ØP PCD ØD Outside ØM Boss ØA Bore B C Price each 1 to 5 ZGDR1.5-20 ZGDR1.5-25 ZGDR1.5-30 ZGDR1.5-40 20 25 30 40 30,00 37,50 45,00 60,00 33,00 40,50 48,00 63,00 25 25 25 25 8 8 8 8 6 6 6 6 10 10 10 10 23,67 F 26,17 F 34,59 F 57,43 F ZGDR2-20 ZGDR2-25 ZGDR2-30 ZGDR2-40 20 25 30 40 40,00 50,00 60,00 80,00 44,00 54,00 64,00 84,00 35 35 35 35 12 12 12 12 8 8 8 8 8 8 8 8 33,25 F 53,47 F 69,25 F 100,65 F Module 2 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 195 Moulded nylon rack Module Nylon 6 reinforced with 30% glass fibre 0.5-4.0 - - - - S  pur rack  Moulded part Pressure angle 20° Material: Nylon 6 reinforced with 30% glass fibre Racks with modules 1.5-4 have steel centres Module 0.5 without steel centre STEEL CENTRE (from Module 1.5) A L B DISCOUNTS Qty. 1+ 10+ 50+ 100+ 400+ Disc. List -10% -25% -35% On request Part number REFERENCE Length ? L (mm) 8 8 0250 4 6,29 F 17 17 17 20 20 20 30 30 30 28 17 17 17 20 20 20 30 30 30 20 0250 0500 1000 0248 0496 0992 0250 0500 1000 1000 4 4 4 4 4 4 4 4 4 - 8,33 F 16,54 F 33,07 F 10,55 F 21,02 F 41,82 F 12,08 F 27,88 F 44,65 F 50,77 F A CRM0.5-250 0,5 CRM1.5-250 CRM1.5-500 CRM1.5-1000 CRM2-250 CRM2-500 CRM2-1000 CRM3-250 CRM3-500 CRM3-1000 CRM4-1000 1,5 1,5 1,5 2,0 2,0 2,0 3,0 3,0 3,0 4,0 Without steel centre With steel centre ? *Depending on availability - Dimensions in mm 196 4 Volume  4 2013 Price each Prix Uni. 1 1 to à ? 9 B ? Module HPC Stock* ? www.hpceurope.com - +33(0)4 37 496 496 Rack with moulded nylon sector Nylon 6 reinforced with 30% glass fibre Module 1.0 - R  ack with fixing base - Pressure angle 20° - Material: Nylon 6 reinforced with 30% glass fibre .Assembly. - R  acks will require mounting holes to be drilled N shape S shape C A B N shape L A B C DISCOUNTS Part number REFERENCE Module ? A CRM1-150N CRM1-250N 1 1 15 15 15,66 15,66 CRM1-150S CRM1-250S 1 1 15 15 15,66 15,66 N shape S shape Qty. 1+ 10+ 50+ 100+ 400+ Disc. List -10% -25% -35% On request S shape L ? B *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com Price each Prix Uni. 1 1 to à ? 9 Length L (mm) Stock* ? 26,00 26,00 150 248 4 4 3,70 F 4,60 F 26,66 26,66 150 248 - 4 3,70 F 4,60 F C ? HPC Volume 4 2013 4 197 Plastic rack Module 0.4-2.0 Machined Delrin - Machined parts - Pressure angle 20° - Max. length 400mm - Max. pitch error 1mm/300mm - Material: delrin plastic .Option. - O  ther lengths available for quantities of 10 or more(max length 400mm) H P L W discounts Qty. 1+ 6+ 20+ Disc. List -5% On request Part number ZR0,4 ZR0,5 ZR0,7 ZR0,8 ZR1 ZR1,25 ZRR1,5 ZRR2 ZRC1 ZRC2 Module 0,4 0,5 0,7 0,8 1,0 1,25 1,5 2,0 1mm CP 2mm CP P (mm) 11,60 11,50 11,30 11,20 14,00 13,75 16,50 18,00 11,67 11,36 W (mm) 6 6 6 6 8 10 12 15 6 6 *Depending on availability - Dimensions in mm 198 4 Volume  4 2013 HPC H (mm) 12 12 12 12 15 15 18 20 12 12 L (mm) 400 400 400 400 400 400 400 400 400 400 Stock* 4 4 - 4 4 4 4 4 - - Price each 1 to 5 40,24 F 41,02 F 43,18 F 43,73 F 45,22 F 48,56 F 51,02 F 56,89 F on request on request www.hpceurope.com - +33(0)4 37 496 496 Approximate size of gear teeth Pressure angle 20° Gears Module 0.25 Module 0.3 Module 0.4 Module 0.5 Module 0.6 Module 0.7 Module 0.75 Module 0.8 Module 0.9 Module 1 Module 1.25 Module 1.5 Module 1.75 Module 2 Module 2.5 Module 3 Module 5 Module 4 Module 6 +33(0)4 37 490 055 - cial2@hpceurope.com Module 8 HPC Volume 4 2013 4 199 rs a ge 301 r u p Sp 202- p. Stainless steel spur gear inox Steel spur gear p.208 p.204 Machined plastic spur gear p.210 Brass spur gear p.216 Moulded plastic spur gear p.238 Toothed bar machined to order Aluminium or brass AAG ABG - Bar stock with teeth machined to your requirements - All types of tooth form Spur or helical gear module 0.4 to module 2 Pulley pitch 2.5mm to 5mm - Bar diameter 20mm to 100mm - Precision class 9 .Option. - Stainless steel 303, TUFNOL .Info.. your Choose orm f tooth ØD Ø20mm to Ø100mm - *  When ordering toothed bars in helical form, face width will be 115mm - ** Dimensions ØA and L are not guaranteed and are given as a guide only - These bars are not kept in stock but are manufactured on demand ØA ANY TYPE OF TOOTH 130* L TL discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ALUMINIUM 6082 Part number AAG2 AAG3 AAG4 AAG5 AAG6 ØD between L** TL 20 and 30 30 160 31 and 40 30 160 41 and 50 40 170 51 and 60 40 170 61 and 100 40 170 ØD GREATER THAN 100mm ON REQUEST BRASS CZ121 Part number ABG2 ABG3 ABG4 ABG5 ABG6 Dimensions in mm ØD between L TL 20 and 30 30 160 31 and 40 30 160 41 and 50 40 170 51 and 60 40 170 61 and 100 40 170 ØD GREATER THAN 100mm ON REQUEST 202 4 Volume  4 2013 HPC Boss ØA** 12 15 20 25 25 Price each 1 to 5 86,90 F 97,69 F 173,91 F 196,99 F 350,54 F Boss ØA 12 15 20 25 25 Price each 1 to 5 100,32 F 122,15 F 208,61 F 250,38 F 394,70 F www.hpceurope.com - +33(0)4 37 496 496 Toothed bar machined to order Steel or Delrin ASG ADG - Bar stock with teeth machined to your requirements - All types of tooth form Spur or helical gear module 0.4 to module 2 Pulley pitch 2.5mm to 5mm - Bar diameter 20mm to 100mm - Precision class 9 .Option. - Stainless steel 303, TUFNOL your Choose orm tooth f ØD Ø20mm to Ø100mm .Info.. - *  When ordering toothed bars in helical form, face width will be 115mm - ** Dimensions ØA and L are not guaranteed and are given as a guide only - These bars are not kept in stock but are manufactured on demand ØA ANY TYPE OF TOOTH 130* L TL discounts 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request STEEL 34C10 Part number ASG2 ASG3 ASG4 ASG5 ASG6 delrin Part number ADG2 ADG3 ADG4 ADG5 ADG6 Dimensions in mm ØD between 20 et 30 31 et 40 41 et 50 51 et 60 61 et 100 ØD between 20 et 30 31 et 40 41 et 50 51 et 60 61 et 100 L** TL 30 160 30 160 40 170 40 170 40 170 ØD GREATER THAN 100mm ON REQUEST L TL 30 160 30 160 40 170 40 170 40 170 ØD GREATER THAN 100mm ON REQUEST +33(0)4 37 490 055 - cial2@hpceurope.com HPC Boss ØA** 12 15 20 25 25 Price each 1 to 5 67,14 F 87,92 F 145,52 F 191,10 F 341,93 F Boss ØA 12 15 20 25 25 Price each 1 to 5 65,89 F 85,49 F 113,70 F 170,73 F 322,78 F Volume 4 2013 4 203 Stainless steel spur gear Stainless steel 303 Module 0.25 - Quality standard 9 - Pressure angle 20° - Material: stainless steel (303) Z10CNF18.09 - Linear speed 300m/min G PG (optional) s ØM Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass Stainle l s stee ØA H8 Nm 0.050 0.230 0.024 0.019 kW 0.005 0.024 0.002 0.002 ØP 2,5 5,5 ØD 8 2,5 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request G0.25-20 G0.25-21 G0.25-22 G0.25-23 G0.25-24 G0.25-25 G0.25-26 G0.25-27 G0.25-28 G0.25-29 G0.25-30 G0.25-31 G0.25-32 G0.25-33 G0.25-34 G0.25-35 G0.25-36 G0.25-37 G0.25-38 G0.25-39 G0.25-40 G0.25-41 G0.25-42 Teeth Z 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Dimensions in mm PCD ØP 5,00 5,25 5,50 5,75 6,00 6,25 6,50 6,75 7,00 7,25 7,50 7,75 8,00 8,25 8,50 8,75 9,00 9,25 9,50 9,75 10,00 10,25 10,50 204 4 Volume  4 2013 Outside ØD 5,50 5,75 6,00 6,25 6,50 6,75 7,00 7,25 7,50 7,75 8,00 8,25 8,50 8,75 9,00 9,25 9,50 9,75 10,00 10,25 10,50 10,75 11,00 Boss ØM 5,50 5,75 6,00 6,25 6,50 6,75 7,00 7,25 7,50 7,75 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 8,00 HPC Bore ØA 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 Weight (kg) G 0,0004 0,0004 0,0005 0,0005 0,0005 0,0006 0,0006 0,0007 0,0007 0,0008 0,0008 0,0009 0,0010 0,0010 0,0011 0,0012 0,0012 0,0013 0,0014 0,0014 0,0015 0,0016 0,0017 PG 0,0003 0,0004 0,0004 0,0004 0,0005 0,0005 0,0006 0,0006 0,0007 0,0007 0,0007 0,0008 0,0008 0,0009 0,0010 0,0010 0,0011 0,0012 0,0012 0,0013 0,0014 0,0014 0,0015 Price each 1 to 5 G 18,33 F 18,51 F 18,62 F 23,23 F 18,97 F 23,67 F 19,25 F 24,01 F 24,14 F 24,39 F 24,62 F 24,77 F 24,96 F 25,20 F 25,39 F 25,65 F 25,88 F 26,07 F 21,27 F 21,39 F 21,57 F 26,85 F 27,08 F PG On request Part number www.hpceurope.com - +33(0)4 37 496 496 G0.25-558 Teeth Z 43 44 45 46 47 48 49 50 52 55 60 62 63 64 65 68 70 72 75 76 80 84 86 88 90 93 95 96 97 99 100 108 110 115 120 124 127 130 132 136 140 148 150 156 180 200 250 PCD ØP 10,75 11,00 11,25 11,50 11,75 12,00 12,25 12,50 13,00 13,75 15,00 15,50 15,75 16,00 16,25 17,00 17,50 18,00 18,75 19,00 20,00 21,00 21,50 22,00 22,50 23,25 23,75 24,00 24,25 24,75 25,00 27,00 27,50 28,75 30,00 31,00 31,75 32,50 33,00 34,00 35,00 37,00 37,50 39,00 45,00 50,00 62,50 Outside ØD 11,25 11,50 11,75 12,00 12,25 12,50 12,75 13,00 13,50 14,25 15,50 16,00 16,25 16,50 16,75 17,50 18,00 18,50 19,25 19,50 20,50 21,50 22,00 22,50 23,00 23,75 24,25 24,50 24,75 25,25 25,50 27,50 28,00 29,25 30,50 31,50 32,25 33,00 33,50 34,50 35,50 37,50 38,00 39,50 45,50 50,50 63,00 558 139,50 140,00 Boss ØM 8,00 8,00 8,00 8,00 8,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 20,00 Bore ØA 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 Weight (kg G PG 0,0017 0,0016 0,0018 0,0017 0,0019 0,0018 0,0020 0,0019 0,0021 0,0019 0,0022 0,0020 0,0023 0,0021 0,0023 0,0022 0,0025 0,0024 0,0028 0,0027 0,0034 0,0031 0,0036 0,0034 0,0037 0,0035 0,0038 0,0036 0,0040 0,0037 0,0043 0,0041 0,0046 0,0044 0,0049 0,0046 0,0053 0,0050 0,0054 0,0052 0,0060 0,0058 0,0066 0,0064 0,0069 0,0067 0,0073 0,0070 0,0076 0,0074 0,0081 0,0079 0,0085 0,0082 0,0087 0,0084 0,0088 0,0086 0,0092 0,0090 0,0094 0,0092 0,0110 0,0107 0,0114 0,0111 0,0124 0,0122 0,0135 0,0133 0,0144 0,0142 0,0151 0,0149 0,0159 0,0156 0,0164 0,0161 0,0174 0,0171 0,0184 0,0182 0,0206 0,0203 0,0211 0,0209 0,0229 0,0226 0,0304 0,0302 0,0376 0,0373 0,0587 0,0585 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 27,24 F 27,41 F 27,60 F 27,82 F 28,03 F 28,22 F 28,41 F 28,60 F 28,74 F 23,76 F 29,97 F 30,17 F 30,33 F 30,64 F 30,95 F 25,24 F 25,39 F 31,74 F 31,97 F 32,29 F 32,61 F 26,48 F 26,60 F 33,03 F 33,13 F 33,32 F 33,61 F 33,74 F 33,89 F 34,02 F 34,22 F 34,48 F 34,69 F 35,03 F 35,63 F 36,13 F 36,60 F 37,17 F 37,86 F 39,57 F 41,19 F 43,95 F 47,96 F 51,33 F 44,42 F 64,40 F 56,19 F On request Part number G0.25-43 G0.25-44 G0.25-45 G0.25-46 G0.25-47 G0.25-48 G0.25-49 G0.25-50 G0.25-52 G0.25-55 G0.25-60 G0.25-62 G0.25-63 G0.25-64 G0.25-65 G0.25-68 G0.25-70 G0.25-72 G0.25-75 G0.25-76 G0.25-80 G0.25-84 G0.25-86 G0.25-88 G0.25-90 G0.25-93 G0.25-95 G0.25-96 G0.25-97 G0.25-99 G0.25-100 G0.25-108 G0.25-110 G0.25-115 G0.25-120 G0.25-124 G0.25-127 G0.25-130 G0.25-132 G0.25-136 G0.25-140 G0.25-148 G0.25-150 G0.25-156 G0.25-180 G0.25-200 G0.25-250 On request Volume 4 2013 4 205 Stainless steel spur gear Stainless steel 303 MODULE 0.3 - Quality standard 9 - Pressure angle 20° - Material: stainless steel (303) Z10CNF18.09 - Linear speed 300m/min G Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass PG (optional) s Stainle l s stee ØM ØA H8 Nm 0.070 0.320 0.034 0.027 kW 0.008 0.031 0.003 0.003 ØP 2,5 5,5 8 ØD 2,5 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Dimensions in mm PCD ØP 6,00 6,30 6,60 6,90 7,20 7,50 7,80 8,10 8,40 8,70 9,00 9,30 9,60 9,90 10,20 10,50 10,80 11,10 11,40 11,70 12,00 12,30 12,60 206 4 Volume  4 2013 Outside ØD 6,60 6,90 7,20 7,50 7,80 8,10 8,40 8,70 9,00 9,30 9,60 9,90 10,20 10,50 10,80 11,10 11,40 11,70 12,00 12,30 12,60 12,90 13,20 Boss ØM 6,60 6,90 7,20 7,50 7,80 8,10 8,40 8,70 9,00 9,30 8,00 8,00 8,00 8,00 8,00 8,00 10,00 10,00 10,00 10,00 10,00 10,00 10,00 HPC Bore ØA 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Weight (kg) G PG 0,0018 0,0005 0,0020 0,0005 0,0022 0,0006 0,0024 0,0007 0,0026 0,0007 0,0028 0,0008 0,0028 0,0008 0,0031 0,0009 0,0033 0,0009 0,0036 0,0010 0,0038 0,0011 0,0039 0,0012 0,0041 0,0012 0,0042 0,0013 0,0043 0,0014 0,0044 0,0015 0,0046 0,0016 0,0047 0,0017 0,0048 0,0018 0,0049 0,0019 0,0050 0,0020 0,0051 0,0021 0,0053 0,0023 Price each 1 to 5 G PG 14,30 F 14,55 F 14,77 F 14,89 F 15,04 F 15,31 F 15,48 F 15,63 F 15,78 F 16,03 F 16,24 F 16,45 F 16,52 F 16,75 F 16,90 F 17,03 F 17,11 F 17,24 F 17,52 F 17,69 F 17,80 F 17,93 F 18,15 F On request Part number G0.3-20 G0.3-21 G0.3-22 G0.3-23 G0.3-24 G0.3-25 G0.3-26 G0.3-27 G0.3-28 G0.3-29 G0.3-30 G0.3-31 G0.3-32 G0.3-33 G0.3-34 G0.3-35 G0.3-36 G0.3-37 G0.3-38 G0.3-39 G0.3-40 G0.3-41 G0.3-42 www.hpceurope.com - +33(0)4 37 496 496 G0,3-464 464 Dimensions in mm PCD ØP 12,90 13,20 13,50 13,80 14,10 14,40 14,70 15,00 15,60 16,20 16,50 17,40 18,00 18,60 18,90 19,20 19,50 20,40 21,00 21,60 22,50 22,80 24,00 25,20 25,80 26,40 27,00 27,90 28,50 28,80 29,10 29,70 30,00 32,40 33,00 34,50 36,00 37,20 38,10 39,00 39,60 40,80 42,00 44,40 45,00 46,80 48,00 54,00 60,00 72,00 Outside ØD 13,50 13,80 14,10 14,40 14,70 15,00 15,30 15,60 16,20 16,80 17,10 18,00 18,60 19,20 19,50 19,80 20,10 21,00 21,60 22,20 23,10 23,40 24,60 25,80 26,40 27,00 27,60 28,50 29,10 29,40 29,70 30,30 30,60 33,00 33,60 35,10 36,60 37,80 38,70 39,60 40,20 41,40 42,60 45,00 45,60 47,40 48,60 54,60 60,60 72,60 Boss ØM 10,00 10,00 10,00 10,00 10,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 20,00 20,00 Bore ØA 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 8 Weight (kg) G PG 0,0054 0,0024 0,0055 0,0025 0,0056 0,0026 0,0057 0,0027 0,0059 0,0029 0,0060 0,0030 0,0061 0,0031 0,0063 0,0032 0,0065 0,0035 0,0068 0,0038 0,0081 0,0039 0,0085 0,0043 0,0089 0,0046 0,0092 0,0050 0,0094 0,0051 0,0095 0,0053 0,0097 0,0055 0,0102 0,0060 0,0106 0,0064 0,0110 0,0068 0,0116 0,0074 0,0018 0,0076 0,0126 0,0084 0,0135 0,0093 0,0140 0,0098 0,0145 0,0102 0,0149 0,0107 0,0157 0,0115 0,0162 0,0120 0,0165 0,0122 0,0167 0,0125 0,0172 0,0130 0,0175 0,0133 0,0198 0,0155 0,0204 0,0161 0,0219 0,0176 0,0235 0,0192 0,0248 0,0206 0,0258 0,0216 0,0268 0,0226 0,0276 0,0233 0,0290 0,0248 0,0305 0,0263 0,0336 0,0294 0,0344 0,0302 0,0369 0,0327 0,0386 0,0344 0,0478 0,0436 0,0581 0,0538 0,0819 0,0776 Gears available up to this size 139,20 139,80 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 18,29 F 18,45 F 18,56 F 18,78 F 18,96 F 19,07 F 19,21 F 19,41 F 19,54 F 19,73 F 19,80 F 20,03 F 20,30 F 20,56 F 20,88 F 21,11 F 21,34 F 21,62 F 21,91 F 22,14 F 22,38 F 22,67 F 22,83 F 22,99 F 23,13 F 23,25 F 23,47 F 23,66 F 23,76 F 23,87 F 24,04 F 24,31 F 24,45 F 24,64 F 24,74 F 24,86 F 25,00 F 25,09 F 25,17 F 25,27 F 25,36 F 26,16 F 26,74 F 28,87 F 29,71 F 31,44 F 40,08 F 46,26 F 47,39 F 51,35 F On request G0.3-43 G0.3-44 G0.3-45 G0.3-46 G0.3-47 G0.3-48 G0.3-49 G0.3-50 G0.3-52 G0.3-54 G0.3-55 G0.3-58 G0.3-60 G0.3-62 G0.3-63 G0.3-64 G0.3-65 G0.3-68 G0.3-70 G0.3-72 G0.3-75 G0.3-76 G0.3-80 G0.3-84 G0.3-86 G0.3-88 G0.3-90 G0.3-93 G0.3-95 G0.3-96 G0.3-97 G0.3-99 G0.3-100 G0.3-108 G0.3-110 G0.3-115 G0.3-120 G0.3-124 G0.3-127 G0.3-130 G0.3-132 G0.3-136 G0.3-140 G0.3-148 G0.3-150 G0.3-156 G0.3-160 G0.3-180 G0.3-200 G0.3-240 Teeth Z 43 44 45 46 47 48 49 50 52 54 55 58 60 62 63 64 65 68 70 72 75 76 80 84 86 88 90 93 95 96 97 99 100 108 110 115 120 124 127 130 132 136 140 148 150 156 160 180 200 240 Part number On request Volume 4 2013 4 207 Steel spur gear Module 0.4 Steel 34C10 G - Precision class 9 - Pressure angle 20° - Linear speed 300m/min PG (optional) ØM ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass Nm 0,147 0,698 0,073 0,058 kW 0,014 0,075 0,008 0,006 ØP 3 7 10 ØD 3 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Dimensions in mm PCD ØP 4,40 4,80 4,80 5,20 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 11,20 11,60 12,00 12,40 12,80 208 4 Volume  4 2013 Outside ØD 5,20 5,60 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 11,20 11,60 12,00 12,40 12,80 13,20 13,60 Boss ØM 5,20 5,60 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 8,00 8,00 8,00 8,00 8,00 8,00 8,00 HPC Bore ØA 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Weight (kg) G PG 0,0012 0,0003 0,0015 0,0003 0,0015 0,0003 0,0018 0,0004 0,0020 0,0005 0,0024 0,0006 0,0027 0,0007 0,0030 0,0008 0,0031 0,0008 0,0035 0,0009 0,0039 0,0010 0,0043 0,0011 0,0047 0,0012 0,0052 0,0014 0,0057 0,0015 0,0062 0,0016 0,0041 0,0018 0,0043 0,0019 0,0044 0,0021 0,0046 0,0023 0,0047 0,0024 0,0049 0,0026 0,0051 0,0028 Price each 1 to 5 G PG 14,60 F 14,60 F 14,60 F 14,60 F 14,77 F 14,77 F 14,77 F 14,77 F 14,77 F 14,77 F 14,77 F 14,77 F 14,55 F 14,60 F 14,67 F 14,73 F 14,77 F 14,81 F 14,87 F 14,89 F 14,97 F 14,98 F 15,04 F On request Part number G0.4-10 G0.4-11 G0.4-12 G0.4-13 G0.4-14 G0.4-15 G0.4-16 G0.4-17 G0.4-18 G0.4-19 G0.4-20 G0.4-21 G0.4-22 G0.4-23 G0.4-24 G0.4-25 G0.4-26 G0.4-27 G0.4-28 G0.4-29 G0.4-30 G0.4-31 G0.4-32 www.hpceurope.com - +33(0)4 37 496 496 G0.4-348 348 PCD ØP 13,20 13,60 14,00 14,40 14,80 15,20 15,60 16,00 16,40 16,80 17,20 17,60 18,00 18,40 18,80 19,20 19,60 20,00 20,40 20,80 21,20 21,60 22,00 22,40 22,80 23,20 23,60 24,00 24,40 24,80 25,20 25,60 26,00 27,20 28,00 28,80 30,00 30,80 32,00 33,60 34,40 35,20 36,00 38,40 40,00 48,00 56,00 60,00 72,00 Outside ØD 14,00 14,40 14,80 15,20 15,60 16,00 16,40 16,80 17,20 17,60 18,00 18,40 18,80 19,20 19,60 20,00 20,40 20,80 21,20 21,60 22,00 22,40 22,80 23,20 23,60 24,00 24,40 24,80 25,20 25,60 26,00 26,40 26,80 28,00 28,80 29,60 30,80 31,60 32,80 34,40 35,20 36,00 36,80 39,20 40,80 48,80 56,80 60,80 72,80 139,20 140,00 Boss ØM 8,00 8,00 8,00 8,00 8,00 8,00 8,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 15,00 Bore ØA 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 Weight (kg) G PG 0,0053 0,0030 0,0055 0,0032 0,0057 0,0034 0,0059 0,0036 0,0061 0,0038 0,0063 0,0040 0,0065 0,0042 0,0097 0,0043 0,0099 0,0046 0,0102 0,0048 0,0104 0,0050 0,0107 0,0053 0,0109 0,0056 0,0112 0,0058 0,0115 0,0061 0,0117 0,0064 0,0120 0,0066 0,0123 0,0069 0,0126 0,0072 0,0129 0,0075 0,0132 0,0078 0,0135 0,0081 0,0138 0,0084 0,0141 0,0088 0,0145 0,0091 0,0148 0,0094 0,0151 0,0098 0,0155 0,0101 0,0158 0,0104 0,0162 0,0108 0,0165 0,0112 0,0169 0,0115 0,0173 0,0119 0,0184 0,0131 0,0192 0,0138 0,0201 0,0147 0,0213 0,0159 0,0222 0,0168 0,0230 0,0180 0,0249 0,0199 0,0259 0,0209 0,0269 0,0219 0,0279 0,0229 0,0311 0,0261 0,0334 0,0284 0,0461 0,0411 0,0611 0,0561 0,0695 0,0645 0,1008 0,0928 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 15,04 F 15,18 F 15,26 F 15,26 F 15,35 F 15,44 F 15,51 F 15,62 F 15,73 F 15,81 F 15,97 F 16,08 F 16,14 F 16,24 F 16,33 F 16,45 F 16,52 F 16,73 F 16,84 F 16,90 F 17,00 F 17,10 F 17,11 F 17,26 F 17,48 F 17,59 F 17,77 F 17,93 F 18,07 F 18,26 F 18,40 F 18,52 F 18,78 F 18,96 F 19,07 F 19,18 F 19,25 F 19,41 F 19,58 F 19,98 F 20,31 F 20,68 F 21,11 F 21,52 F 21,84 F 22,22 F 24,14 F 28,68 F 34,97 F On request Part number Teeth Z G0.4-33 33 G0.4-34 34 G0.4-35 35 G0.4-36 36 G0.4-37 37 G0.4-38 38 G0.4-39 39 G0.4-40 40 G0.4-41 41 G0.4-42 42 G0.4-43 43 G0.4-44 44 G0.4-45 45 G0.4-46 46 G0.4-47 47 G0.4-48 48 G0.4-49 49 G0.4-50 50 G0.4-51 51 G0.4-52 52 G0.4-53 53 G0.4-54 54 G0.4-55 55 G0.4-56 56 G0.4-57 57 G0.4-58 58 G0.4-59 59 G0.4-60 60 G0.4-61 61 G0.4-62 62 G0.4-63 63 G0.4-64 64 G0.4-65 65 G0.4-68 68 G0.4-70 70 G0.4-72 72 G0.4-75 75 G0.4-77 77 G0.4-80 80 G0.4-84 84 G0.4-86 86 G0.4-88 88 G0.4-90 90 G0.4-96 96 G0.4-100 100 G0.4-120 120 G0.4-140 140 G0.4-150 150 G0.4-180 180 On request Volume 4 2013 4 209 Plastic spur gear Machined Delrin usiné Module 0.4 ZPG (optional) ZG - Machined parts - Quality standard 9 - Pressure angle 20° - Working temp.: -50°C to +80°C Torque indication For 50 teeth at 1000 rpm Delrin 0.04 Nm ØM ØA H8 ØP 3 4 ØD 7 3 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Dimensions in mm PCD ØP 4,40 4,80 4,80 5,20 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 11,20 11,60 12,00 12,40 12,80 210 4 Volume  4 2013 Outside ØD 5,20 5,60 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 11,20 11,60 12,00 12,40 12,80 13,20 13,60 Boss ØM 5,20 5,60 5,60 6,00 6,40 6,80 7,00 7,00 7,00 7,00 7,00 7,00 7,00 9,00 9,00 9,00 9,00 9,00 11,00 11,00 11,00 11,00 11,00 HPC Bore Weight (kg) Price each 1 to 5 ØA ZG ZPG ZG ZPG 1,50 0,0002 0,0001 6,46 F 1,50 0,0002 0,0001 6,47 F 1,50 0,0002 0,0001 6,48 F 1,50 0,0002 0,0001 6,50 F 2,00 0,0002 0,0001 6,52 F 2,00 0,0002 0,0001 6,55 F 2,00 0,0002 0,0001 6,57 F 2,00 0,0002 0,0001 6,60 F 2,00 0,0003 0,0001 7,36 F 2,00 0,0003 0,0002 7,36 F 2,00 0,0004 0,0002 7,36 F 2,00 0,0004 0,0002 7,36 F 2,00 0,0004 0,0002 7,29 F 2,00 0,0006 0,0002 7,29 F 2,00 0,0006 0,0003 7,29 F 2,00 0,0006 0,0003 7,36 F 2,00 0,0006 0,0003 7,36 F 2,00 0,0007 0,0003 7,44 F 3,00 0,0008 0,0004 7,44 F 3,00 0,0008 0,0004 7,44 F 3,00 0,0009 0,0004 7,44 F 3,00 0,0009 0,0004 7,48 F 3,00 0,0009 0,0005 7,48 F On request Part number ZG0.4-10 ZG0.4-11 ZG0.4-12 ZG0.4-13 ZG0.4-14 ZG0.4-15 ZG0.4-16 ZG0.4-17 ZG0.4-18 ZG0.4-19 ZG0.4-20 ZG0.4-21 ZG0.4-22 ZG0.4-23 ZG0.4-24 ZG0.4-25 ZG0.4-26 ZG0.4-27 ZG0.4-28 ZG0.4-29 ZG0.4-30 ZG0.4-31 ZG0.4-32 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 68 70 72 75 77 80 84 86 88 90 96 100 120 140 150 180 PCD ØP 13,20 13,60 14,00 14,40 14,80 15,20 15,60 16,00 16,40 16,80 17,20 17,60 18,00 18,40 18,80 19,20 19,60 20,00 20,40 20,80 21,20 21,60 22,00 22,40 22,80 23,20 23,60 24,00 24,40 24,80 25,20 25,60 26,00 27,20 28,00 28,80 30,00 30,80 32,00 33,60 34,40 35,20 36,00 38,40 40,00 48,00 56,00 60,00 72,00 Outside ØD 14,00 14,40 14,80 15,20 15,60 16,00 16,40 16,80 17,20 17,60 18,00 18,40 18,80 19,20 19,60 20,00 20,40 20,80 21,20 21,60 22,00 22,40 22,80 23,20 23,60 24,00 24,40 24,80 25,20 25,60 26,00 26,40 26,80 28,00 28,80 29,60 30,80 31,60 32,80 34,40 35,20 36,00 36,80 39,20 40,80 48,80 56,80 60,80 72,80 ZG0.4-348 348 139,20 140,00 Dimensions in mm Boss ØM 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 20 20 Bore ØA 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 3,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 6,00 6,00 Weight (kg) ZG ZPG 0,0010 0,0005 0,0010 0,0005 0,0010 0,0006 0,0011 0,0006 0,0011 0,0006 0,0011 0,0007 0,0012 0,0007 0,0012 0,0007 0,0012 0,0008 0,0013 0,0008 0,0013 0,0009 0,0014 0,0009 0,0014 0,0010 0,0015 0,0010 0,0015 0,0010 0,0015 0,0011 0,0018 0,0011 0,0019 0,0012 0,0019 0,0012 0,0020 0,0013 0,0020 0,0013 0,0021 0,0014 0,0021 0,0014 0,0022 0,0015 0,0023 0,0015 0,0023 0,0016 0,0024 0,0016 0,0024 0,0017 0,0025 0,0018 0,0025 0,0018 0,0026 0,0019 0,0027 0,0019 0,0027 0,0020 0,0029 0,0022 0,0031 0,0023 0,0032 0,0025 0,0034 0,0027 0,0036 0,0028 0,0038 0,0031 0,0041 0,0034 0,0043 0,0035 0,0044 0,0037 0,0046 0,0039 0,0051 0,0044 0,0055 0,0048 0,0077 0,0069 0,0102 0,0095 0,0116 0,0109 0,0164 0,0157 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 7,48 F 7,59 F 7,59 F 7,59 F 7,67 F 7,79 F 7,79 F 7,85 F 7,85 F 7,91 F 7,99 F 8,02 F 8,02 F 8,17 F 8,23 F 8,23 F 8,30 F 8,33 F 8,39 F 8,39 F 8,53 F 8,55 F 8,55 F 8,68 F 8,76 F 8,84 F 8,91 F 8,96 F 9,06 F 9,11 F 9,25 F 9,28 F 9,42 F 9,50 F 9,59 F 9,59 F 10,61 F 10,71 F 10,71 F 10,90 F 11,00 F 11,12 F 11,30 F 11,56 F 13,37 F 13,59 F 15,11 F 16,90 F 18,67 F On request Part number ZG0.4-33 ZG0.4-34 ZG0.4-35 ZG0.4-36 ZG0.4-37 ZG0.4-38 ZG0.4-39 ZG0.4-40 ZG0.4-41 ZG0.4-42 ZG0.4-43 ZG0.4-44 ZG0.4-45 ZG0.4-46 ZG0.4-47 ZG0.4-48 ZG0.4-49 ZG0.4-50 ZG0.4-51 ZG0.4-52 ZG0.4-53 ZG0.4-54 ZG0.4-55 ZG0.4-56 ZG0.4-57 ZG0.4-58 ZG0.4-59 ZG0.4-60 ZG0.4-61 ZG0.4-62 ZG0.4-63 ZG0.4-64 ZG0.4-65 ZG0.4-68 ZG0.4-70 ZG0.4-72 ZG0.4-75 ZG0.4-77 ZG0.4-80 ZG0.4-84 ZG0.4-86 ZG0.4-88 ZG0.4-90 ZG0.4-96 ZG0.4-100 ZG0.4-120 ZG0.4-140 ZG0.4-150 ZG0.4-180 On request Volume 4 2013 4 211 Steel spur gear Module 0.5 Steel 34C10 G PG (optional) ØM - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass ØP 5 Nm 0.391 1.850 0.195 0.156 kW 0.041 0.194 0.021 0.016 7 12 ØD 5 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PCD Outside Boss ØP ØD ØM 5,50 6,50 6,50 6,00 7,00 7,00 6,00 7,00 7,00 6,50 7,50 7,50 7,00 8,00 8,00 7,50 8,50 8,50 8,00 9,00 8,50 8,50 9,50 8,50 9,00 10,00 8,50 9,50 10,50 8,50 10,00 11,00 8,50 10,50 11,50 8,50 11,00 12,00 8,50 11,50 12,50 8,50 12,00 13,00 10,00 12,50 13,50 10,00 13,00 14,00 10,00 13,50 14,50 10,00 14,00 15,00 10,00 14,50 15,50 10,00 15,00 16,00 10,00 15,50 16,50 10,00 16,00 17,00 10,00 16,50 17,50 10,00 17,00 18,00 10,00 17,50 18,50 10,00 *Depending on availability - Dimensions in mm 212 4 Volume  4 2013 HPC Bore ØA 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 Price each 1 to 5 Weight (kg) PG PG G 0,0020 0,0006 15,26 F 0,0025 0,0008 15,26 F 0,0025 0,0008 15,26 F 0,0030 0,0010 15,44 F 0,0035 0,0012 15,62 F 0,0037 0,0014 15,81 F 0,0038 0,0014 16,08 F 0,0041 0,0017 16,22 F 0,0043 0,0020 16,33 F 0,0046 0,0022 16,52 F 0,0049 0,0025 16,84 F 0,0052 0,0028 17,00 F 0,0055 0,0032 17,19 F 0,0059 0,0035 17,42 F 0,0067 0,0036 17,59 F 0,0071 0,0039 17,80 F 0,0075 0,0043 18,02 F 0,0079 0,0047 18,26 F 0,0083 0,0051 18,52 F 0,0087 0,0056 18,52 F 0,0092 0,0060 18,62 F 0,0096 0,0065 18,85 F 0,0101 0,0069 19,07 F 0,0106 0,0074 19,25 F 0,0111 0,0079 19,43 F 0,0116 0,0085 19,73 F Stock* G - - 4 - 4 4 4 - 4 - 4 - - 4 4 4 - - - - 4 - 4 - - 4 On request Teeth Part number Z G0.5-10 10 G0.5-11 11 G0.5-12 12 G0.5-13 13 G0.5-14 14 G0.5-15 15 G0.5-16 16 G0.5-17 17 G0.5-18 18 G0.5-19 19 G0.5-20 20 G0.5-21 21 G0.5-22 22 G0.5-23 23 G0.5-24 24 G0.5-25 25 G0.5-26 26 G0.5-27 27 G0.5-28 28 G0.5-29 29 G0.5-30 30 G0.5-31 31 G0.5-32 32 G0.5-33 33 G0.5-34 34 G0.5-35 35 www.hpceurope.com - +33(0)4 37 496 496 G0.5-278 Bore ØA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 4 - - - 4 - - - - - - - - 4 4 - - - - - - - - - 4 - - - - - 4 4 - - 4 - - - 4 - 4 4 - - - - - - 0,0121 0,0127 0,0133 0,0138 0,0144 0,0150 0,0157 0,0163 0,0169 0,0176 0,0183 0,0190 0,0197 0,0204 0,0222 0,0230 0,0238 0,0246 0,0254 0,0262 0,0270 0,0279 0,0287 0,0296 0,0305 0,0314 0,0323 0,0342 0,0352 0,0382 0,0403 0,0424 0,0457 0,0480 0,0515 0,0565 0,0590 0,0616 0,0643 0,0727 0,0786 0,1116 0,1507 0,1725 0,2469 0,3040 0,3671 0,4730 Gears available up to this size 278 139,00 140,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com Price each 1 to 5 G PG 0,0090 19,93 F 0,0095 20,14 F 0,0101 20,30 F 0,0107 20,54 F 0,0113 20,73 F 0,0119 20,96 F 0,0125 21,17 F 0,0131 21,34 F 0,0138 21,57 F 0,0145 21,77 F 0,0151 22,00 F 0,0158 22,19 F 0,0166 22,67 F 0,0173 22,67 F 0,0177 22,90 F 0,0185 23,05 F 0,0192 23,17 F 0,0200 23,39 F 0,0208 23,50 F 0,0216 23,67 F 0,0225 23,81 F 0,0233 23,99 F 0,0242 24,14 F 0,0251 24,31 F 0,0260 24,45 F 0,0269 24,56 F 0,0278 24,74 F 0,0297 25,09 F 0,0307 25,27 F 0,0337 25,42 F 0,0357 25,72 F 0,0379 25,97 F 0,0412 26,18 F 0,0435 26,48 F 0,0470 26,74 F 0,0519 26,95 F 0,0545 27,29 F 0,0571 27,49 F 0,0598 27,82 F 0,0682 28,07 F 0,0740 28,17 F 0,1071 34,10 F 0,1462 40,75 F 0,1679 44,30 F 0,2423 50,11 F 0,2994 54,73 F 0,3625 59,67 F 0,4684 65,59 F Weight (kg) Stock* G PG HPC On request Teeth PCD Outside Boss Part number Z ØP ØD ØM G0.5-36 36 18,00 19,00 10,00 G0.5-37 37 18,50 19,50 10,00 G0.5-38 38 19,00 20,00 10,00 G0.5-39 39 19,50 20,50 10,00 G0.5-40 40 20,00 21,00 10,00 G0.5-41 41 20,50 21,50 10,00 G0.5-42 42 21,00 22,00 10,00 G0.5-43 43 21,50 22,50 10,00 G0.5-44 44 22,00 23,00 10,00 G0.5-45 45 22,50 23,50 10,00 G0.5-46 46 23,00 24,00 10,00 G0.5-47 47 23,50 24,50 10,00 G0.5-48 48 24,00 25,00 10,00 G0.5-49 49 24,50 25,50 10,00 G0.5-50 50 25,00 26,00 12,00 G0.5-51 51 25,50 26,50 12,00 G0.5-52 52 26,00 27,00 12,00 G0.5-53 53 26,50 27,50 12,00 G0.5-54 54 27,00 28,00 12,00 G0.5-55 55 27,50 28,50 12,00 G0.5-56 56 28,00 29,00 12,00 G0.5-57 57 28,50 29,50 12,00 G0.5-58 58 29,00 30,00 12,00 G0.5-59 59 29,50 30,50 12,00 G0.5-60 60 30,00 31,00 12,00 G0.5-61 61 30,50 31,50 12,00 G0.5-62 62 31,00 32,00 12,00 G0.5-64 64 32,00 33,00 12,00 G0.5-65 65 32,50 33,50 12,00 G0.5-68 68 34,00 35,00 12,00 G0.5-70 70 35,00 36,00 12,00 G0.5-72 72 36,00 37,00 12,00 G0.5-75 75 37,50 38,50 12,00 G0.5-77 77 38,50 39,50 12,00 G0.5-80 80 40,00 41,00 12,00 G0.5-84 84 42,00 43,00 12,00 G0.5-86 86 43,00 44,00 12,00 G0.5-88 88 44,00 45,00 12,00 G0.5-90 90 45,00 46,00 12,00 G0.5-96 96 48,00 49,00 12,00 G0.5-100 100 50,00 51,00 12,00 G0.5-120 120 60,00 61,00 18,00 G0.5-140 140 70,00 71,00 18,00 G0.5-150 150 75,00 76,00 18,00 G0.5-180 180 90,00 91,00 20,00 G0.5-200 200 100,00 101,00 20,00 G0.5-220 220 110,00 111,00 20,00 G0.5-250 250 125,00 126,00 20,00 On request Volume 4 2013 4 213 Plastic spur gear Machined Delrin Module 0.5  achined parts M Quality standard 9 Pressure angle 20° Working temp. -50°C to +80°C ZG ZPG (optional) ØM Torque indication For 50 teeth at 1000 rpm Delrin 0.1 Nm 24/48 hours ØA H8 in STOCK* ØP otherwise contact us 4 5 ØD 9 Part number ZG0.5-10 ZG0.5-11 ZG0.5-12 ZG0.5-13 ZG0.5-14 ZG0.5-15 ZG0.5-16 ZG0.5-17 ZG0.5-18 ZG0.5-19 ZG0.5-20 ZG0.5-21 ZG0.5-22 ZG0.5-23 ZG0.5-24 ZG0.5-25 ZG0.5-26 ZG0.5-27 ZG0.5-28 ZG0.5-29 ZG0.5-30 ZG0.5-31 ZG0.5-32 ZG0.5-33 Teeth Z 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PCD ØP 5,50 6,00 6,00 6,50 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 Outside ØD 6,50 7,00 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 Boss ØM 6,5 7 7 7 7 7 7 8 8 9 9 9 9 10 10 10 10 10 10 10 12 12 12 12 *Depending on availability- Dimensions in mm 214 4 Volume  4 2013 HPC 4 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Price each 1 to 5 Bore Stock* Weight (kg) ZG ZPG ZG ZPG ØA 0,0003 0,0001 - 6,99 F 0,0003 0,0001 - 6,99 F 0,0003 0,0001 4 7,91 F 0,0004 0,0002 - 7,91 F 0,0004 0,0002 - 7,08 F 0,0004 0,0002 4 7,91 F 0,0005 0,0002 4 7,04 F 0,0006 0,0003 - 8,17 F 0,0006 0,0003 - 8,23 F 0,0007 0,0003 - 8,30 F 0,0007 0,0004 4 8,39 F 0,0008 0,0004 - 8,53 F 0,0008 0,0005 - 8,55 F 0,0010 0,0005 - 8,76 F 0,0010 0,0005 4 8,84 F 0,0011 0,0006 4 8,91 F 0,0011 0,0006 4 9,06 F 0,0012 0,0007 - 9,11 F 0,0012 0,0008 4 9,28 F 0,0013 0,0008 - 9,28 F 0,0015 0,0008 4 9,33 F 0,0016 0,0009 - 9,42 F 0,0016 0,0010 4 9,59 F 0,0017 0,0010 - 9,63 F 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 On request - - - - www.hpceurope.com - +33(0)4 37 496 496 PCD ØP 17,00 17,50 18,00 20,00 20,50 21,00 21,50 22,00 22,50 23,00 23,50 24,00 24,50 25,00 25,50 26,00 26,50 27,00 27,50 28,00 28,50 29,00 29,50 30,00 30,50 31,00 31,50 32,00 32,50 34,00 35,00 36,00 37,50 38,50 40,00 42,00 43,00 44,00 45,00 48,00 50,00 60,00 75,00 90,00 100,00 110,00 125,00 Outside Boss ØD ØM 18,00 12 18,50 12 19,00 12 21,00 12 21,50 12 22,00 12 22,50 12 23,00 12 23,50 12 24,00 12 24,50 12 25,00 12 25,50 12 26,00 12 26,50 12 27,00 12 27,50 12 28,00 14 28,50 14 29,00 14 29,50 14 30,00 14 30,50 14 31,00 14 31,50 14 32,00 14 32,50 14 33,00 14 33,50 14 35,00 14 36,00 14 37,00 14 38,50 14 39,50 14 41,00 16 43,00 16 16 44,00 45,00 16 46,00 16 49,00 16 51,00 16 61,00 16 76,00 20 91,00 20 101,00 30 111,00 30 126,00 50 Price each 1 to 5 Bore Stock* Weight (kg) ZG ZPG ZG ZPG ØA 4 0,0017 0,0011 9,66 F 4 4 0,0018 0,0012 9,87 F 4 4 0,0019 0,0012 9,97 F 4 4 0,0022 0,0016 10,39 F 4 4 0,0023 0,0016 10,47 F - 4 0,0024 0,0017 10,61 F - 4 0,0024 0,0018 10,71 F - 4 0,0025 0,0019 10,90 F - 4 0,0026 0,0020 10,93 F 4 4 0,0027 0,0021 11,00 F - 4 0,0028 0,0022 11,12 F - 4 0,0029 0,0023 11,42 F - 4 0,0030 0,0024 11,42 F - 4 0,0031 0,0025 11,48 F 4 4 0,0032 0,0026 11,56 F 4 4 0,0033 0,0027 11,60 F - 4 0,0034 0,0028 11,66 F - 4 0,0038 0,0029 11,79 F - 4 0,0039 0,0030 11,85 F - 4 0,0040 0,0031 11,96 F 4 4 0,0041 0,0032 12,02 F - 4 0,0042 0,0033 13,37 F - 4 0,0044 0,0035 13,42 F - 4 0,0045 0,0036 13,49 F 4 4 0,0046 0,0037 13,59 F - 4 0,0047 0,0038 13,64 F - 4 0,0049 0,0039 13,74 F - 4 0,0050 0,0041 13,93 F - 4 0,0051 0,0042 14,00 F 4 4 0,0055 0,0046 14,02 F - 4 0,0058 0,0049 14,18 F 4 4 0,0061 0,0052 14,33 F 4 4 0,0065 0,0056 14,49 F - 4 0,0068 0,0059 14,70 F - 5 0,0075 0,0064 16,73 F 4 5 0,0082 0,0070 16,90 F - 5 0,0085 0,0074 17,19 F - 5 0,0089 0,0077 17,28 F - 5 0,0092 0,0081 17,42 F 4 5 0,0104 0,0092 17,59 F - 5 0,0112 0,0100 21,34 F 4 5 0,0156 0,0144 29,17 F 4 8 0,0238 0,0226 40,22 F 4 8 0,0338 0,0326 50,56 F - 10 0,0415 0,0403 41,07 F - 10 0,0499 0,0488 41,07 F - 12 0,0642 0,0630 50,56 F - On request Teeth Part number Z ZG0.5-34 34 ZG0.5-35 35 ZG0.5-36 36 ZG0.5-40 40 ZG0.5-41 41 ZG0.5-42 42 ZG0.5-43 43 ZG0.5-44 44 ZG0.5-45 45 ZG0.5-46 46 ZG0.5-47 47 ZG0.5-48 48 ZG0.5-49 49 ZG0.5-50 50 ZG0.5-51 51 ZG0.5-52 52 ZG0.5-53 53 ZG0.5-54 54 ZG0.5-55 55 ZG0.5-56 56 ZG0.5-57 57 ZG0.5-58 58 ZG0.5-59 59 ZG0.5-60 60 ZG0.5-61 61 ZG0.5-62 62 ZG0.5-63 63 ZG0.5-64 64 ZG0.5-65 65 ZG0.5-68 68 ZG0.5-70 70 ZG0.5-72 72 ZG0.5-75 75 ZG0.5-77 77 ZG0.5-80 80 ZG0.5-84 84 ZG0.5-86 86 ZG0.5-88 88 ZG0.5-90 90 ZG0.5-96 96 ZG0.5-100 100 ZG0.5-120 120 ZG0.5-150 150 ZG0.5-180 180 ZG0.5-200 200 ZG0.5-220 220 ZG0.5-250 250 Gears available up to this size ZG0.5-278 278 139,00 140,00 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 215 Brass spur gear Brass CuZn40Pb3 Module 0.5 GB ØM Torque and power indication For 50 teeth at 1000 rpm 34C10 0.391 0.041 Nm kW ØA H8 Brass 0.195 0.021 - Quality standard 9 - Pressure angle 20° ØP ØD 5 7 12 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number GB0.5-10 GB0.5-12 GB0.5-15 GB0.5-18 GB0.5-20 GB0.5-22 GB0.5-25 GB0.5-28 GB0.5-30 GB0.5-35 GB0.5-40 GB0.5-45 GB0.5-50 GB0.5-55 GB0.5-60 GB0.5-70 GB0.5-80 GB0.5-90 GB0.5-100 GB0.5-120 GB0.5-140 GB0.5-150 GB0.5-180 Teeth Z 10 12 15 18 20 22 25 28 30 35 40 45 50 55 60 70 80 90 100 120 140 150 180 PCD ØP 5,50 6,00 7,50 9,00 10,00 11,00 12,50 14,00 15,00 17,50 20,00 22,50 25,00 27,50 30,00 35,00 40,00 45,00 50,00 60,00 70,00 75,00 90,00 Outside ØD 6,50 7,00 8,50 10,00 11,00 12,00 13,50 15,00 16,00 18,50 21,00 23,50 26,00 28,50 31,00 36,00 41,00 46,00 51,00 61,00 71,00 76,00 91,00 GB0.5-278 278 139,00 140,00 Dimensions in mm - 4 4 - 4 - 4 4 4 - 4 - 4 - 4 4 4 - 4 4 - - 4 Price each 1 to 5 10,02 F 10,51 F 11,01 F 11,55 F 12,03 F 12,53 F 13,79 F 14,79 F 15,03 F 15,54 F 16,55 F 18,05 F 20,06 F 21,06 F 22,08 F 25,09 F 32,62 F 35,12 F 36,64 F 47,69 F 90,36 F 95,39 F 165,67 F Dimensions: contact us On request Boss ØM 6,50 7,00 8,50 8,50 8,50 8,50 10,00 10,00 10,00 10,00 10,00 10,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 18,00 18,00 18,00 20,00 Bore ØA 3 3 3 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 8 Gears available up to this size 216 4 Volume  4 2013 HPC Stock* www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 303 MODULE SSG - Quality standard 9 - Pressure angle 20° Nm kW 0.5 ØM Torque and power indication For 50 teeth at 1000 rpm STS 303 brass fibre ØA H8 ØP ØD s steel stainles 4 7 11 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part Teeth PCD Outside Boss Bore number Z ØP ØD ØM ØA SSG0.5-12-303 12 6,0 7,0 7,0 3 SSG0.5-15-303 15 7,5 8,5 8,5 3 SSG0.5-16-303 16 8,0 9,0 8,5 4 SSG0.5-18-303 18 9,0 10,0 8,5 4 SSG0.5-20-303 20 10,0 11,0 8,5 4 SSG0.5-22-303 22 11,0 12,0 8,5 4 SSG0.5-24-303 24 12,0 13,0 10,0 5 SSG0.5-25-303 25 12,5 13,5 10,0 5 SSG0.5-26-303 26 13,0 14,0 10,0 5 SSG0.5-28-303 28 14,0 15,0 10,0 5 SSG0.5-30-303 30 15,0 16,0 10,0 5 SSG0.5-32-303 32 16,0 17,0 10,0 5 SSG0.5-36-303 36 18,0 19,0 10,0 5 SSG0.5-40-303 40 20,0 21,0 10,0 5 SSG0.5-44-303 44 22,0 23,0 10,0 5 SSG0.5-48-303 48 24,0 25,0 10,0 5 SSG0.5-50-303 50 25,0 26,0 12,0 6 SSG0.5-54-303 54 27,0 28,0 12,0 6 SSG0.5-56-303 56 28,0 29,0 12,0 6 SSG0.5-60-303 60 30,0 31,0 12,0 6 SSG0.5-64-303 64 32,0 33,0 12,0 6 SSG0.5-70-303 70 35,0 36,0 12,0 6 SSG0.5-80-303 80 40,0 41,0 12,0 6 SSG0.5-278-303 278 - - - - - - - - - - - - - - - - - - - - - - - Price each 1 to 5 16,29 F 16,84 F 17,14 F 17,36 F 17,88 F 18,29 F 18,78 F 18,93 F 19,20 F 19,73 F 19,83 F 20,30 F 21,18 F 22,09 F 22,97 F 24,06 F 24,37 F 25,00 F 25,36 F 26,03 F 28,54 F 29,27 F 30,41 F Dimensions: contact us On request Gears available up to this size 139,0 140,0 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Stock* Volume 4 2013 4 217 Stainless steel spur gear Stainless steel 304L MODULE 0.5 SSG - Quality standard 9 - Pressure angle 20° ØM ØA H8 Torque and power indication For 50 teeth at 1000 rpm STS 304L brass fibre ØP Nm 0.391 0.195 0.156 kW 0.041 0.021 0.016 ØD 5 7 12 s steel stainles discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part Teeth PCD Outside number Z ØP ØD SSG0.5-12-304L 12 6 7 SSG0.5-15-304L 15 7,5 8,5 SSG0.5-16-304L 16 8 9 SSG0.5-18-304L 18 9 10 SSG0.5-20-304L 20 10 11 SSG0.5-22-304L 22 11 12 SSG0.5-24-304L 24 12 13 SSG0.5-25-304L 25 12,5 13,5 SSG0.5-26-304L 26 13 14 SSG0.5-28-304L 28 14 15 SSG0.5-30-304L 30 15 16 SSG0.5-32-304L 32 16 17 SSG0.5-36-304L 36 18 19 SSG0.5-40-304L 40 20 21 SSG0.5-44-304L 44 22 23 SSG0.5-48-304L 48 24 25 SSG0.5-50-304L 50 25 26 SSG0.5-54-304L 54 27 28 SSG0.5-56-304L 56 28 29 SSG0.5-60-304L 60 30 31 SSG0.5-64-304L 64 32 33 SSG0.5-70-304L 70 35 36 SSG0.5-80-304L 80 40 41 Boss Bore ØM ØA 7 3 8,5 3 8,5 4 8,5 4 8,5 4 8,5 4 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 10 5 12 6 12 6 12 6 12 6 12 6 12 6 12 6 Price each 1 to 5 20,35 F 21,08 F 21,43 F 21,69 F 22,35 F 22,90 F 23,49 F 23,72 F 24,04 F 24,67 F 24,83 F 25,41 F 26,56 F 27,63 F 28,76 F 30,17 F 30,47 F 31,28 F 31,74 F 32,58 F 35,71 F 36,58 F 38,02 F SSG0.5-278-304L Dimensions : contact us On request 278 Gears available up to this size 139 140 *Depending on availability - Dimensions in mm 218 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 316L MODULE 0.5 SSG - Quality standard 9 - Pressure angle 20° ØM Torque and power indication For 50 teeth at 1000 rpm STS 316L brass fibre ØA H8 Nm 0.391 0.195 0.156 kW 0.041 0.021 0.016 s steel stainles ØP ØD 6 7 13 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Teeth PCD Outside Boss Bore Part Z ØP ØD ØM ØA number SSG0.5-12-316L 12 6,0 7,0 7,0 3 SSG0.5-16-316L 16 8,0 9,0 8,5 4 SSG0.5-18-316L 18 9,0 10,0 8,5 4 SSG0.5-20-316L 20 10,0 11,0 8,5 4 SSG0.5-22-316L 22 11,0 12,0 8,5 4 SSG0.5-24-316L 24 12,0 13,0 10,0 5 SSG0.5-25-316L 25 12,5 13,5 10,0 5 SSG0.5-26-316L 26 13,0 14,0 10,0 5 SSG0.5-28-316L 28 14,0 15,0 10,0 5 SSG0.5-30-316L 30 15,0 16,0 10,0 5 SSG0.5-32-316L 32 16,0 17,0 10,0 5 SSG0.5-36-316L 36 18,0 19,0 10,0 5 SSG0.5-40-316L 40 20,0 21,0 10,0 5 SSG0.5-44-316L 44 22,0 23,0 10,0 5 SSG0.5-48-316L 48 24,0 25,0 10,0 5 SSG0.5-50-316L 50 25,0 26,0 12,0 6 SSG0.5-54-316L 54 27,0 28,0 12,0 6 SSG0.5-56-316L 56 28,0 29,0 12,0 6 SSG0.5-60-316L 60 30,0 31,0 12,0 6 SSG0.5-64-316L 64 32,0 33,0 12,0 6 SSG0.5-70-316L 70 35,0 36,0 12,0 6 SSG0.5-80-316L 80 40,0 41,0 12,0 6 Price each 1 to 5 30,54 F 32,16 F 32,55 F 33,54 F 34,31 F 35,25 F 35,50 F 36,01 F 36,99 F 37,19 F 38,07 F 39,72 F 41,43 F 43,07 F 45,13 F 45,71 F 46,89 F 47,56 F 48,80 F 53,53 F 54,87 F 57,05 F SSG0.5-278-316L On request 278 Gears available up to this size 139,0 140,0 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com Dimensions: contact us HPC Volume 4 2013 4 219 Steel spur gear Module 0.6 Steel 34C10 G PG (optional) - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØM .Option. ØA H8 - A  lternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass Nm 0.630 2.910 0.315 0.240 kW 0.067 0.306 0.033 0.022 ØP 6 14 ØD 8 6 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PCD Outside ØP ØD 6,60 7,80 7,80 9,00 8,40 9,60 9,60 10,80 10,80 12,00 12,00 13,20 13,20 14,40 14,40 15,60 16,80 18,00 17,40 18,60 21,00 22,20 24,00 25,20 30,00 31,60 33,00 34,20 36,00 37,20 37,80 39,00 48,00 49,20 50,40 51,60 72,00 73,20 90,00 91,20 G0.6-231 138,60 139,80 231 Boss ØM 7,80 9,00 9,60 10,80 12,00 12,00 12,00 12,00 12,00 12,00 15,00 15,00 20,00 20,00 20,00 20,00 20,00 30,00 30,00 30,00 Bore ØA 3 3 4 4 4 4 4 4 4 4 5 5 6 6 6 6 6 8 8 8 Weight (kg) Price each 1 to 5 G PG Stock* G PG 0,004 0,001 - 16,03 F 0,005 0,002 4 16,03 F 0,006 0,002 - 16,03 F 0,008 0,003 4 16,41 F 0,010 0,004 4 17,11 F 0,011 0,005 4 18,10 F 0,012 0,006 - 18,74 F 0,013 0,007 4 18,89 F 0,016 0,010 - 19,65 F 0,016 0,010 - 19,89 F 0,025 0,015 - 20,66 F 0,029 0,020 4 20,89 F 0,049 0,030 - 21,27 F 0,055 0,038 - 21,53 F 0,063 0,045 - 21,91 F 0,068 0,050 - 22,19 F 0,099 0,082 - 23,47 F 0,129 0,089 - 24,04 F 0,225 0,185 - 36,59 F 0,330 0,290 - 48,68 F Gears available up to this size *Depending on availability - Dimensions in mm 220 4 Volume  4 2013 HPC Dimensions: contact us On request Teeth Part number Z G0.6-10 10 G0.6-12 12 G0.6-14 14 G0.6-16 16 G0.6-18 18 G0.6-20 20 G0.6-22 22 G0.6-24 24 G0.6-28 28 G0.6-29 29 G0.6-35 35 G0.6-40 40 G0.6-50 50 G0.6-55 55 G0.6-60 60 G0.6-63 63 G0.6-80 80 G0.6-84 84 G0.6-120 120 G0.6-150 150 On request www.hpceurope.com - +33(0)4 37 496 496 Steel spur gear Module Steel 34C10 G - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØM .Option. - Alternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass ØP Nm 1 5 kW 0.104 0.522 0.54 0.06 0.7 PG (optional) 0.450 0.045 ØD 8 6 6 14 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PCD Outside ØP ØD 7,00 8,40 7,70 9,10 8,40 9,80 8,40 9,80 9,10 10,50 10,50 11,90 12,60 14,00 14,00 15,40 16,80 18,20 18,20 19,60 19,60 21,00 21,00 22,40 24,50 25,90 28,00 29,40 29,40 30,80 33,60 35,00 35,00 36,40 42,00 43,40 49,00 50,40 53,20 54,60 122,50 123,90 G0.7-198 138,60 140,00 198 Boss ØM 8,40 9,10 9,80 9,80 10,50 11,90 12,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 25,00 Bore ØA 4 4 4 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 8 8 12 Weight (kg) Price each 1 to 5 G PG Stock* G PG 0,004 0,003 - 17,11 F 0,005 0,003 4 17,11 F 0,006 0,004 - 17,11 F 0,006 0,005 4 17,11 F 0,007 0,005 - 17,58 F 0,009 0,006 4 18,36 F 0,011 0,008 4 19,80 F 0,012 0,009 4 20,22 F 0,015 0,012 4 21,03 F 0,017 0,014 - 21,50 F 0,019 0,016 - 21,77 F 0,021 0,018 - 22,13 F 0,031 0,025 - 22,33 F 0,038 0,031 4 22,57 F 0,040 0,034 4 22,70 F 0,050 0,044 - 23,13 F 0,053 0,047 4 23,39 F 0,073 0,067 - 24,38 F 0,094 0,092 - 25,39 F 0,109 0,107 - 26,74 F 0,566 0,547 - 70,80 F On request Teeth Part number Z G0.7-9 9 G0.7-10 10 G0.7-11 11 G0.7-12 12 G0.7-13 13 G0.7-15 15 G0.7-18 18 G0.7-20 20 G0.7-24 24 G0.7-26 26 G0.7-28 28 G0.7-30 30 G0.7-35 35 G0.7-40 40 G0.7-42 42 G0.7-48 48 G0.7-50 50 G0.7-60 60 G0.7-70 70 G0.7-76 76 G0.7-175 175 Gears available up to this size *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 221 Steel spur gear Module 0.75 Steel 34C10 G PG (optional) - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØM ØA H8 .Option. - A  lternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format ØP Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 6 8 ØD 6 14 Nm 0.990 4.570 0.480 0.380 kW 0.104 0.477 0.057 0.037 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PCD Outside ØP ØD 8,25 9,75 9,00 10,50 9,75 11,25 10,50 12,00 11,25 12,75 12,75 14,25 13,50 15,00 15,00 16,50 16,50 18,00 18,00 19,50 18,75 20,25 21,00 22,50 22,50 24,00 30,00 31,50 33,75 35,25 45,00 46,50 52,50 54,00 54,00 55,50 75,00 76,50 112,50 114,00 135,00 136,50 G0.75-184 138,00 184 Dimensions in mm Boss ØM 9,75 10,50 11,25 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 30,00 Bore ØA 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 8 8 8 10 12 Weight (kg) G PG 0,006 0,002 0,007 0,002 0,008 0,003 0,009 0,003 0,009 0,004 0,011 0,005 0,011 0,006 0,013 0,007 0,015 0,009 0,017 0,011 0,017 0,012 0,021 0,015 0,023 0,017 0,042 0,031 0,050 0,040 0,082 0,072 0,106 0,097 0,112 0,103 0,210 0,201 0,470 0,454 0,671 0,655 Gears available up to this size 222 4 Volume  4 2013 139,50 HPC Dimensions: contact us Price each 1 to 5 G PG 16,03 F 16,41 F 16,75 F 17,13 F 17,58 F 18,52 F 18,89 F 19,25 F 19,65 F 20,03 F 20,25 F 20,66 F 20,84 F 21,27 F 21,62 F 23,17 F 24,31 F 25,00 F 41,11 F 67,26 F 91,59 F On request Teeth Part number Z G0.75-10 10 G0.75-11 11 G0.75-13 13 G0.75-14 14 G0.75-15 15 G0.75-17 17 G0.75-18 18 G0.75-20 20 G0.75-22 22 G0.75-24 24 G0.75-25 25 G0.75-28 28 G0.75-30 30 G0.75-40 40 G0.75-45 45 G0.75-60 60 G0.75-70 70 G0.75-72 72 G0.75-100 100 G0.75-150 150 G0.75-180 180 On request www.hpceurope.com - +33(0)4 37 496 496 Your parts made to measure Bore, keyway, standard modification... Machined to drawings or from samples... Send us your requests to cial2@hpceurope.com www.hpceurope.com - +33(0)4 37 496 496 Steel spur gear Module 0.8 Steel 34C10 G PG (optional) ØM - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 24/48 hours Part number G0.8-9 G0.8-10 G0.8-11 G0.8-12 G0.8-13 G0.8-14 G0.8-15 G0.8-16 G0.8-17 G0.8-18 G0.8-19 G0.8-20 G0.8-21 G0.8-22 G0.8-23 G0.8-24 G0.8-25 G0.8-26 G0.8-27 G0.8-28 G0.8-29 G0.8-30 G0.8-31 G0.8-32 0.54 0.06 0.450 0.045 8 14 ØD 6 in STOCK* DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request otherwise contact us Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PCD Outside Boss ØP ØD ØM 8,00 9,60 9,60 8,80 10,40 10,40 9,60 11,20 11,20 9,60 11,20 11,20 10,40 12,00 12,00 11,20 12,80 12,00 12,00 13,60 12,00 12,80 14,40 12,00 13,60 15,20 12,00 14,40 16,00 12,00 15,20 16,80 12,00 16,00 17,60 12,00 16,80 18,40 12,00 17,60 19,20 12,00 18,40 20,00 12,00 19,20 20,80 12,00 20,00 21,60 12,00 20,80 22,40 12,00 21,60 23,20 12,00 22,40 24,00 12,00 23,20 24,80 12,00 24,00 25,60 16,00 24,80 26,40 16,00 25,60 27,20 16,00 *Depending on availability - Dimensions in mm 224 4 Volume  4 2013 HPC Bore ØA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 Weight (kg) Price each 1 to 5 Stock* G PG G PG - 4 4 4 - 4 4 4 - 4 - 4 - - - 4 4 - - - 4 4 - 4 0,006 0,007 0,009 0,009 0,011 0,012 0,013 0,014 0,015 0,017 0,018 0,020 0,021 0,023 0,025 0,026 0,028 0,030 0,032 0,034 0,037 0,043 0,045 0,048 0,002 0,003 0,004 0,004 0,005 0,006 0,007 0,008 0,010 0,011 0,012 0,014 0,015 0,017 0,019 0,021 0,023 0,024 0,027 0,029 0,031 0,032 0,035 0,037 17,11 F 17,11 F 17,11 F 17,11 F 17,58 F 17,93 F 18,36 F 18,81 F 19,41 F 19,80 F 20,16 F 20,22 F 20,42 F 20,66 F 20,88 F 21,03 F 21,27 F 21,50 F 21,68 F 21,77 F 21,95 F 22,13 F 22,14 F 22,19 F On request Nm 1 5 kW 0.104 0.522 ØP 6 www.hpceurope.com - +33(0)4 37 496 496 G0.8-173 Teeth PCD Outside Boss Z ØP ØD ØM 33 26,40 28,00 16,00 34 27,20 28,80 16,00 35 28,00 29,60 16,00 36 28,80 30,40 16,00 37 29,60 31,20 16,00 38 30,40 32,00 16,00 39 31,20 32,80 16,00 40 32,00 33,60 16,00 41 32,80 34,40 16,00 42 33,60 35,20 16,00 43 34,40 36,00 16,00 44 35,20 36,80 16,00 45 36,00 37,60 16,00 46 36,80 38,40 16,00 47 37,60 39,20 16,00 48 38,40 40,00 16,00 49 39,20 40,80 16,00 50 40,00 41,60 16,00 51 40,80 42,40 16,00 52 41,60 43,20 16,00 53 42,40 44,00 16,00 54 43,20 44,80 16,00 55 44,00 45,60 16,00 56 44,80 46,40 16,00 57 45,60 47,20 16,00 58 46,40 48,00 16,00 59 47,20 48,80 16,00 60 48,00 49,60 16,00 61 48,80 50,40 16,00 62 49,60 51,20 16,00 63 50,40 52,00 16,00 64 51,20 52,80 16,00 66 52,80 54,40 16,00 68 54,40 56,00 16,00 70 56,00 57,60 16,00 75 60,00 61,60 16,00 76 60,80 62,40 16,00 80 64,00 65,60 16,00 86 68,80 70,40 16,00 88 70,40 72,00 16,00 90 72,00 73,60 20,00 96 76,80 78,40 20,00 100 80,00 81,60 20,00 112 89,60 91,20 20,00 120 96,00 97,60 20,00 127 101,60 103,20 25,00 128 102,40 104,00 25,00 140 112,00 113,60 25,00 150 120,00 121,60 25,00 Bore ØA 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 12 - - - 4 - 4 - 4 - - - - - - - - - 4 - - 4 - - - - - - 4 - - 4 - - - 4 - - - - - 4 - 4 - - - - - - 0,050 0,053 0,056 0,058 0,061 0,064 0,067 0,070 0,073 0,076 0,080 0,083 0,086 0,090 0,093 0,097 0,101 0,105 0,108 0,112 0,116 0,121 0,125 0,129 0,133 0,138 0,142 0,144 0,149 0,153 0,158 0,163 0,173 0,183 0,194 0,222 0,228 0,252 0,290 0,303 0,324 0,367 0,397 0,495 0,566 0,633 0,653 0,777 0,889 Gears available up to this size 173 138,40 140,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com Price each 1 to 5 PG Weight (kg) Stock* G PG G HPC 0,040 0,042 0,045 0,048 0,050 0,053 0,056 0,059 0,062 0,066 0,069 0,072 0,076 0,079 0,083 0,086 0,090 0,094 0,098 0,102 0,106 0,110 0,114 0,118 0,123 0,127 0,132 0,135 0,139 0,144 0,149 0,154 0,164 0,174 0,185 0,213 0,218 0,242 0,281 0,294 0,308 0,351 0,381 0,479 0,550 0,617 0,626 0,750 0,862 22,28 F 22,29 F 22,33 F 22,38 F 22,44 F 22,51 F 22,51 F 22,67 F 22,70 F 22,74 F 22,77 F 22,83 F 22,90 F 22,99 F 23,05 F 23,13 F 23,17 F 23,22 F 23,39 F 21,72 F 23,56 F 23,67 F 23,76 F 23,86 F 23,99 F 24,04 F 24,18 F 24,31 F 24,38 F 24,51 F 24,56 F 24,68 F 24,78 F 24,90 F 25,09 F 25,39 F 26,03 F 26,74 F 27,19 F 27,58 F 28,17 F 28,68 F 31,41 F 36,40 F 41,45 F 49,77 F 51,35 F 54,22 F 62,74 F On request Part number G0.8-33 G0.8-34 G0.8-35 G0.8-36 G0.8-37 G0.8-38 G0.8-39 G0.8-40 G0.8-41 G0.8-42 G0.8-43 G0.8-44 G0.8-45 G0.8-46 G0.8-47 G0.8-48 G0.8-49 G0.8-50 G0.8-51 G0.8-52 G0.8-53 G0.8-54 G0.8-55 G0.8-56 G0.8-57 G0.8-58 G0.8-59 G0.8-60 G0.8-61 G0.8-62 G0.8-63 G0.8-64 G0.8-66 G0.8-68 G0.8-70 G0.8-75 G0.8-76 G0.8-80 G0.8-86 G0.8-88 G0.8-90 G0.8-96 G0.8-100 G0.8-112 G0.8-120 G0.8-127 G0.8-128 G0.8-140 G0.8-150 On request Volume 4 2013 4 225 HEAVY DUTY spur gear Steel 35NCD6 Module 0.8 YG XG (optional) ØM - - - -  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened Nm 4.000 kW 0.418 5.800 0.612 10 8 18 ØD 10 24/48 hours 4.000 11.000 0.418 01.119 in STOCK* otherwise contact us DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 33 PCD Outside Boss ØP ØD ØM 8,00 9,60 9,60 8,80 10,40 10,40 9,60 11,20 11,20 9,60 11,20 11,20 10,40 12,00 12,40 11,20 12,80 12,80 12,00 13,60 13,60 12,80 14,40 14,00 13,60 15,20 14,00 14,40 16,00 14,00 15,20 16,80 14,00 16,00 17,60 14,00 16,80 18,40 14,00 17,60 19,20 14,00 18,40 20,00 14,00 19,20 20,80 14,00 20,00 21,60 14,00 20,80 22,40 14,00 21,60 23,20 14,00 22,40 24,00 14,00 23,20 24,80 14,00 24,00 25,60 20,00 24,80 26,40 20,00 26,40 28,00 20,00 *Depending on availability - Dimensions in mm 226 4 Volume  4 2013 HPC Bore ØA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 Weight (kg) Price each 1 to 5 Stock* YG XG YG XG 4 4 - 4 4 - 4 4 - 4 - 4 - - - 4 4 - - - - 4 - - 0,008 0,010 0,011 0,011 0,014 0,015 0,017 0,019 0,020 0,022 0,023 0,025 0,026 0,028 0,030 0,031 0,033 0,035 0,037 0,039 0,042 0,054 0,056 0,061 0,002 0,003 0,004 0,004 0,005 0,006 0,007 0,008 0,010 0,011 0,012 0,014 0,015 0,017 0,019 0,021 0,023 0,024 0,027 0,029 0,031 0,032 0,035 0,040 21,34 F 21,34 F 21,34 F 21,34 F 21,91 F 22,33 F 22,90 F 23,47 F 24,18 F 24,68 F 25,00 F 25,27 F 25,42 F 25,77 F 26,03 F 26,19 F 26,53 F 26,79 F 27,01 F 27,19 F 27,36 F 27,52 F 27,58 F 27,82 F On request Part number YG0.8-9 YG0.8-10 YG0.8-11 YG0.8-12 YG0.8-13 YG0.8-14 YG0.8-15 YG0.8-16 YG0.8-17 YG0.8-18 YG0.8-19 YG0.8-20 YG0.8-21 YG0.8-22 YG0.8-23 YG0.8-24 YG0.8-25 YG0.8-26 YG0.8-27 YG0.8-28 YG0.8-29 YG0.8-30 YG0.8-31 YG0.8-33 www.hpceurope.com - +33(0)4 37 496 496 YG0.8-173 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 66 68 70 75 76 80 86 88 90 96 100 112 120 127 128 140 150 175 200 PCD ØP 27,20 28,00 28,80 29,60 30,40 31,20 32,00 32,80 33,60 34,40 35,20 36,00 36,80 37,60 38,40 39,20 40,00 40,80 41,60 42,40 43,20 44,00 44,80 45,60 46,40 47,20 48,00 48,80 49,60 50,40 51,20 52,80 54,40 56,00 60,00 60,80 64,00 68,80 70,40 72,00 76,80 80,00 89,60 96,00 101,60 102,40 112,00 120,00 140,00 160,00 Outside ØD 28,80 29,60 30,40 31,20 32,00 32,80 33,60 34,40 35,20 36,00 36,80 37,60 38,40 39,20 40,00 40,80 41,60 42,40 43,20 44,00 44,80 45,60 46,40 47,20 48,00 48,80 49,60 50,40 51,20 52,00 52,80 54,40 56,00 57,60 61,60 62,40 65,60 70,40 72,00 73,60 78,40 81,60 91,20 97,60 103,20 104,00 113,60 121,60 141,60 161,60 Boss ØM 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 20,00 30,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 40,00 50,00 50,00 50,00 50,00 50,00 Bore ØA 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 12 12 15 Weight (kg) Price each 1 to 5 Stock* YG XG YG XG - 4 - - 4 - 4 - - - - - - - - - 4 - 4 - 4 - - - - - - - - - - - - - - 4 - - - 4 - 4 - - - - - - - - 0,063 0,066 0,069 0,072 0,075 0,078 0,081 0,084 0,087 0,090 0,093 0,097 0,100 0,104 0,108 0,111 0,115 0,119 0,123 0,127 0,131 0,135 0,140 0,144 0,148 0,153 0,157 0,162 0,167 0,172 0,177 0,210 0,254 0,265 0,293 0,299 0,323 0,361 0,374 0,388 0,431 0,461 0,559 0,630 0,697 0,750 0,873 0,985 1,298 1,658 Gears available up to this size 173 138,40 140,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 0,042 0,045 0,048 0,050 0,053 0,056 0,059 0,062 0,066 0,069 0,072 0,076 0,079 0,083 0,086 0,090 0,094 0,098 0,102 0,106 0,110 0,114 0,118 0,123 0,127 0,132 0,136 0,141 0,146 0,151 0,155 0,164 0,174 0,185 0,213 0,218 0,242 0,281 0,294 0,308 0,351 0,381 0,479 0,550 0,617 0,624 0,748 0,859 1,172 1,533 27,84 F 27,92 F 27,95 F 28,00 F 28,08 F 28,15 F 28,17 F 28,23 F 28,30 F 28,32 F 28,48 F 28,60 F 28,69 F 28,74 F 28,87 F 28,90 F 28,92 F 29,15 F 29,27 F 29,34 F 29,49 F 29,66 F 29,73 F 29,94 F 30,03 F 30,11 F 30,26 F 30,40 F 30,54 F 30,70 F 30,82 F 30,89 F 31,04 F 31,29 F 31,67 F 32,40 F 33,35 F 33,82 F 34,40 F 35,13 F 35,70 F 39,19 F 45,45 F 51,65 F 62,02 F 64,02 F 67,66 F 78,21 F 99,39 F 111,44 F On request Part number YG0.8-34 YG0.8-35 YG0.8-36 YG0.8-37 YG0.8-38 YG0.8-39 YG0.8-40 YG0.8-41 YG0.8-42 YG0.8-43 YG0.8-44 YG0.8-45 YG0.8-46 YG0.8-47 YG0.8-48 YG0.8-49 YG0.8-50 YG0.8-51 YG0.8-52 YG0.8-53 YG0.8-54 YG0.8-55 YG0.8-56 YG0.8-57 YG0.8-58 YG0.8-59 YG0.8-60 YG0.8-61 YG0.8-62 YG0.8-63 YG0.8-64 YG0.8-66 YG0.8-68 YG0.8-70 YG0.8-75 YG0.8-76 YG0.8-80 YG0.8-86 YG0.8-88 YG0.8-90 YG0.8-96 YG0.8-100 YG0.8-112 YG0.8-120 YG0.8-127 YG0.8-128 YG0.8-140 YG0.8-150 YG0.8-175 YG0.8-200 On request Volume 4 2013 4 227 Plastic spur gear Machined Delrin Module 0.8 - - - - ZG ZPG (optional)  achined parts M Quality standard 9 Pressure angle 20° Working temp. -50°C to +80°C ØM ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 0.3 Nm ØP 6 ØD 6 6 12 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Dimensions in mm PCD ØP 8,00 8,80 9,60 9,60 10,40 11,20 12,00 12,80 13,60 14,40 15,20 16,00 16,80 17,60 18,40 19,20 20,00 20,80 21,60 22,40 23,20 24,00 24,80 228 4 Volume  4 2013 Outside ØD 9,60 10,40 11,20 11,20 12,00 12,80 13,60 14,40 15,20 16,00 16,80 17,60 18,40 19,20 20,00 20,80 21,60 22,40 23,20 24,00 24,80 25,60 26,40 Boss ØM 9,60 10,40 11,20 11,20 12,00 12,80 13,60 14,40 15,20 14,00 14,00 14,00 14,00 14,00 14,00 14,00 14,00 14,00 14,00 14,00 14,00 15,00 15,00 HPC Bore ØA 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 Weight (kg) ZG ZPG 0,0008 0,0003 0,0010 0,0004 0,0012 0,0005 0,0012 0,0005 0,0014 0,0006 0,0016 0,0007 0,0019 0,0008 0,0021 0,0009 0,0024 0,0011 0,0023 0,0012 0,0024 0,0013 0,0025 0,0015 0,0027 0,0016 0,0029 0,0018 0,0030 0,0020 0,0032 0,0021 0,0034 0,0023 0,0036 0,0025 0,0038 0,0027 0,0040 0,0029 0,0043 0,0032 0,0046 0,0033 0,0048 0,0036 Price each 1 to 5 ZG ZPG 8,55 F 8,55 F 8,55 F 8,55 F 8,84 F 8,96 F 9,25 F 9,42 F 9,66 F 9,97 F 10,03 F 10,13 F 10,23 F 10,36 F 10,47 F 10,51 F 10,61 F 10,78 F 10,90 F 10,93 F 11,00 F 11,08 F 11,08 F On request Part number ZG0.8-9 ZG0.8-10 ZG0.8-11 ZG0.8-12 ZG0.8-13 ZG0.8-14 ZG0.8-15 ZG0.8-16 ZG0.8-17 ZG0.8-18 ZG0.8-19 ZG0.8-20 ZG0.8-21 ZG0.8-22 ZG0.8-23 ZG0.8-24 ZG0.8-25 ZG0.8-26 ZG0.8-27 ZG0.8-28 ZG0.8-29 ZG0.8-30 ZG0.8-31 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 32 33 34 35 36 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 57 58 59 60 61 62 63 64 66 68 70 75 76 80 86 88 90 96 100 112 120 140 150 ZG0.8-173 173 Dimensions in mm PCD Outside ØP ØD 25,60 27,20 26,40 28,00 27,20 28,80 28,00 29,60 28,80 30,40 30,40 32,00 31,20 32,80 32,00 33,60 32,80 34,40 33,60 35,20 34,40 36,00 35,20 36,80 36,00 37,60 36,80 38,40 37,60 39,20 38,40 40,00 39,20 40,80 40,00 41,60 40,80 42,40 41,60 43,20 42,40 44,00 43,20 44,80 44,00 45,60 45,60 47,20 46,40 48,00 47,20 48,80 48,00 49,60 48,80 50,40 49,60 51,20 50,40 52,00 51,20 52,80 52,80 54,40 54,40 56,00 56,00 57,60 60,00 61,60 60,80 62,40 64,00 65,60 68,80 70,40 70,40 72,00 72,00 73,60 76,80 78,40 80,00 81,60 89,60 91,20 96,00 97,60 112,00 113,60 120,00 121,60 Boss ØM 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 15,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 18,00 22,00 22,00 22,00 22,00 30,00 30,00 30,00 Bore ØA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 Weight (kg) ZG ZPG 0,0050 0,0038 0,0053 0,0041 0,0055 0,0043 0,0058 0,0046 0,0061 0,0049 0,0067 0,0054 0,0070 0,0057 0,0073 0,0061 0,0076 0,0064 0,0079 0,0067 0,0082 0,0070 0,0086 0,0074 0,0089 0,0077 0,0093 0,0081 0,0096 0,0084 0,0100 0,0088 0,0104 0,0092 0,0108 0,0095 0,0111 0,0099 0,0115 0,0103 0,0120 0,0107 0,0124 0,0112 0,0128 0,0116 0,0141 0,0124 0,0146 0,0128 0,0150 0,0133 0,0155 0,0137 0,0160 0,0142 0,0164 0,0147 0,0169 0,0152 0,0174 0,0157 0,0184 0,0167 0,0195 0,0177 0,0205 0,0188 0,0233 0,0216 0,0239 0,0222 0,0263 0,0246 0,0302 0,0285 0,0316 0,0298 0,0339 0,0312 0,0382 0,0355 0,0413 0,0386 0,0511 0,0484 0,0583 0,0556 0,0785 0,0758 0,0898 0,0870 Gears available up to this size 138,40 140,00 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 11,12 F 11,12 F 11,12 F 11,23 F 12,37 F 12,47 F 12,47 F 12,53 F 12,53 F 12,53 F 12,55 F 12,55 F 12,66 F 12,66 F 12,77 F 14,54 F 14,54 F 14,54 F 14,70 F 14,73 F 14,83 F 14,89 F 14,97 F 15,04 F 15,11 F 15,21 F 15,24 F 18,45 F 18,52 F 18,55 F 18,67 F 18,74 F 18,81 F 19,00 F 21,77 F 22,90 F 23,23 F 23,69 F 24,10 F 24,10 F 26,06 F 28,48 F 36,81 F 41,78 F 49,29 F 60,67 F On request Part number ZG0.8-32 ZG0.8-33 ZG0.8-34 ZG0.8-35 ZG0.8-36 ZG0.8-38 ZG0.8-39 ZG0.8-40 ZG0.8-41 ZG0.8-42 ZG0.8-43 ZG0.8-44 ZG0.8-45 ZG0.8-46 ZG0.8-47 ZG0.8-48 ZG0.8-49 ZG0.8-50 ZG0.8-51 ZG0.8-52 ZG0.8-53 ZG0.8-54 ZG0.8-55 ZG0.8-57 ZG0.8-58 ZG0.8-59 ZG0.8-60 ZG0.8-61 ZG0.8-62 ZG0.8-63 ZG0.8-64 ZG0.8-66 ZG0.8-68 ZG0.8-70 ZG0.8-75 ZG0.8-76 ZG0.8-80 ZG0.8-86 ZG0.8-88 ZG0.8-90 ZG0.8-96 ZG0.8-100 ZG0.8-112 ZG0.8-120 ZG0.8-140 ZG0.8-150 On request Volume 4 2013 4 229 Brass spur gear Brass CuZn40Pb3 Module 0.8 GB - Quality standard 9 - Pressure angle 20° ØM Torque and power indication For 50 teeth at 1000 rpm 0.54 0.06 1.000 0.104 Nm kW ØA H8 Brass 34C10 ØP ØD 6 8 14 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Part number GB0.8-10 GB0.8-12 GB0.8-15 GB0.8-18 GB0.8-20 GB0.8-22 GB0.8-25 GB0.8-28 GB0.8-30 GB0.8-35 GB0.8-40 GB0.8-45 GB0.8-50 GB0.8-55 GB0.8-60 GB0.8-66 GB0.8-70 GB0.8-75 GB0.8-80 GB0.8-86 GB0.8-90 GB0.8-100 GB0.8-120 Teeth Z 10 12 15 18 20 22 25 28 30 35 40 45 50 55 60 66 70 75 80 86 90 100 120 GB0.8-173 173 PCD ØP 8,80 9,60 12,00 14,40 16,00 17,60 20,00 22,40 24,00 28,00 32,00 36,00 40,00 44,00 48,00 52,80 56,00 60,00 64,00 68,80 72,00 80,00 96,00 Outside ØD 10,40 11,20 13,60 16,00 17,60 19,20 21,60 24,00 25,60 29,60 33,60 37,60 41,60 45,60 49,60 54,40 57,60 61,60 65,60 70,40 73,60 81,60 97,60 138,40 140,00 Boss ØM 10,40 11,20 12,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 20,00 20,00 Bore ØA 5 5 5 5 5 5 5 5 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 - 4 4 - 4 - 4 - 4 - 4 - 4 - 4 - 4 - 4 - - 4 - Price each 1 to 5 12,03 F 12,53 F 13,52 F 14,55 F 16,04 F 16,55 F 17,56 F 18,54 F 20,06 F 21,06 F 23,08 F 25,09 F 26,34 F 28,59 F 35,12 F 43,64 F 44,83 F 45,67 F 48,87 F 50,19 F 51,18 F 92,86 F 113,88 F Dimensions: contact us On request Gears available up to this size *Depending on availability - Dimensions in mm 230 4 Volume  4 2013 HPC Stock* www.hpceurope.com - +33(0)4 37 496 496 Portal Free access from our website X Z Y + than 1000 different product ranges available for download www.hpceurope.com - +33(0)4 37 496 496 Steel spur gear Module 1.0 Steel 34C10 G PG (optional) ØM - P  recision class 9 - Pressure angle 20° - Linear speed 300m/min ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass ØP 8 12 20 Nm 2.600 12 1.25 1 kW 0.254 1.261 0.134 0.104 ØD 8 24/48 hours in STOCK* otherwise contact us DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PCD ØP 10,00 11,00 12,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 33,00 34,00 Outside ØD 12,00 13,00 14,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 33,00 34,00 35,00 36,00 Boss ØM 12 13 14 14 15 15 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 *Depending on availability - Dimensions in mm 232 4 Volume  4 2013 HPC Bore ØA 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Price each 1 to 5 Weight (kg) PG PG G 0,003 15,26 F 0,004 15,26 F 0,005 15,26 F 0,005 7,88 F 0,006 15,48 F 0,008 15,78 F 0,008 8,29 F 0,009 8,39 F 0,011 16,63 F 0,013 8,77 F 0,014 17,24 F 0,016 9,15 F 0,018 17,93 F 0,020 14,31 F 0,022 18,26 F 0,025 9,50 F 0,027 9,87 F 0,029 18,26 F 0,032 20,22 F 0,035 20,36 F 0,037 21,22 F 0,040 11,12 F 0,043 21,84 F 0,046 11,42 F 0,049 22,33 F 0,053 22,67 F Stock* G 4 4 - 4 4 4 4 4 4 4 - 4 4 4 4 4 4 4 4 4 4 4 - 4 - 4 0,011 0,014 0,017 0,017 0,020 0,021 0,014 0,015 0,017 0,024 0,026 0,028 0,030 0,032 0,034 0,036 0,039 0,041 0,044 0,046 0,049 0,064 0,067 0,070 0,074 0,077 On request Part number G1-9 G1-10 G1-11 G1-12 G1-13 G1-14 G1-15 G1-16 G1-17 G1-18 G1-19 G1-20 G1-21 G1-22 G1-23 G1-24 G1-25 G1-26 G1-27 G1-28 G1-29 G1-30 G1-31 G1-32 G1-33 G1-34 www.hpceurope.com - +33(0)4 37 496 496 G1-590 Teeth Z 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 68 70 72 73 74 76 78 80 84 88 90 96 100 112 120 130 150 PCD ØP 35,00 36,00 37,00 38,00 39,00 40,00 41,00 42,00 43,00 44,00 45,00 46,00 47,00 48,00 49,00 50,00 51,00 52,00 53,00 54,00 55,00 56,00 57,00 58,00 59,00 60,00 61,00 62,00 63,00 64,00 65,00 66,00 68,00 70,00 72,00 73,00 74,00 76,00 78,00 80,00 84,00 88,00 90,00 96,00 100,00 112,00 120,00 130,00 150,00 Outside Boss ØD ØM 37,00 20 38,00 20 39,00 20 40,00 20 41,00 20 42,00 20 43,00 20 44,00 20 45,00 20 46,00 20 47,00 20 48,00 20 49,00 20 50,00 20 51,00 20 52,00 30 53,00 30 54,00 30 55,00 30 56,00 30 57,00 30 58,00 30 59,00 30 60,00 30 61,00 30 62,00 30 63,00 30 64,00 30 65,00 30 66,00 30 67,00 30 68,00 30 70,00 30 72,00 30 74,00 30 75,00 30 30 76,00 78,00 30 80,00 30 82,00 30 86,00 30 90,00 30 92,00 30 98,00 30 102,00 30 114,00 30 122,00 30 132,00 30 152,00 40 Bore ØA 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 15 Weight (kg) Price each 1 to 5 Stock* G PG G PG - 4 4 - - 4 - 4 - 4 4 4 - 4 - 4 - 4 - 4 4 4 - - - 4 - - 4 4 4 - 4 4 4 - - 4 4 4 - - 4 4 4 - 4 - 4 0,080 0,083 0,087 0,091 0,094 0,098 0,102 0,106 0,110 0,114 0,119 0,123 0,127 0,132 0,137 0,173 0,178 0,183 0,188 0,193 0,198 0,204 0,209 0,215 0,220 0,226 0,232 0,238 0,244 0,250 0,256 0,262 0,275 0,288 0,302 0,309 0,316 0,331 0,345 0,361 0,392 0,425 0,442 0,496 0,534 0,656 0,745 0,865 1,135 Gears available up to this size 590 590,00 592,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 0,056 0,059 0,063 0,066 0,070 0,074 0,078 0,082 0,086 0,090 0,094 0,099 0,103 0,108 0,112 0,115 0,120 0,125 0,130 0,135 0,141 0,146 0,151 0,157 0,163 0,168 0,174 0,180 0,186 0,192 0,198 0,205 0,218 0,231 0,244 0,251 0,258 0,273 0,288 0,303 0,334 0,368 0,385 0,438 0,476 0,598 0,688 0,808 1,077 22,90 F 11,92 F 23,42 F 23,81 F 24,26 F 12,76 F 24,74 F 24,86 F 25,00 F 25,00 F 25,17 F 25,27 F 25,36 F 25,39 F 26,74 F 14,49 F 28,46 F 28,87 F 29,22 F 29,62 F 30,09 F 30,11 F 30,63 F 30,99 F 31,34 F 16,44 F 32,18 F 32,76 F 33,66 F 34,32 F 35,11 F 35,83 F 37,19 F 37,70 F 38,46 F 39,52 F 40,54 F 41,05 F 41,71 F 42,54 F 43,13 F 44,09 F 45,45 F 50,32 F 51,03 F 63,85 F 72,18 F 81,89 F 96,08 F On request Part number G1-35 G1-36 G1-37 G1-38 G1-39 G1-40 G1-41 G1-42 G1-43 G1-44 G1-45 G1-46 G1-47 G1-48 G1-49 G1-50 G1-51 G1-52 G1-53 G1-54 G1-55 G1-56 G1-57 G1-58 G1-59 G1-60 G1-61 G1-62 G1-63 G1-64 G1-65 G1-66 G1-68 G1-70 G1-72 G1-73 G1-74 G1-76 G1-78 G1-80 G1-84 G1-88 G1-90 G1-96 G1-100 G1-112 G1-120 G1-130 G1-150 On request Volume 4 2013 4 233 HEAVY DUTY spur gear Steel 35NCD6 Module 1.0 - - - - YG XG (optional)  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØM ØA H8 .Options. - Material 20NCD2 case-hardened Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened Part number YG1-9 YG1-10 YG1-11 YG1-12 YG1-13 YG1-14 YG1-15 YG1-16 YG1-17 YG1-18 YG1-19 YG1-20 YG1-21 YG1-22 YG1-23 YG1-24 YG1-25 YG1-26 YG1-27 YG1-28 YG1-29 YG1-30 YG1-31 YG1-32 YG1-33 Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PCD ØP 10,00 11,00 12,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 33,00 Outside ØD 12,00 13,00 14,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 33,00 34,00 35,00 15 24/48 hours Boss ØM 12 13 14 14 15 16 17 18 18 18 18 20 20 20 20 20 20 25 25 25 25 25 25 25 25 *Depending on availability - Dimensions in mm 234 4 Volume  4 2013 10 25 HPC ØD 15 in STOCK* otherwise contact us DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Bore Weight (kg) ØA Stock* YG XG 6 0,017 0,006 - 6 0,020 0,008 4 6 0,024 0,010 - 6 0,024 0,010 4 6 0,028 0,012 - 6 0,032 0,014 4 6 0,037 0,017 4 8 0,041 0,017 - 8 0,044 0,020 4 8 0,047 0,023 - 8 0,051 0,027 - 8 0,059 0,030 4 8 0,063 0,034 - 8 0,066 0,038 4 8 0,071 0,042 - 8 0,075 0,046 4 8 0,079 0,051 4 8 0,097 0,055 - 8 0,102 0,060 - 8 0,107 0,065 4 8 0,112 0,070 - 8 0,117 0,075 4 8 0,123 0,081 - 8 0,129 0,087 4 8 0,135 0,092 - Price each 1 to 5 YG XG 19,00 F 19,00 F 19,00 F 19,00 F 19,30 F 19,73 F 20,00 F 20,38 F 20,73 F 21,17 F 21,53 F 22,28 F 22,44 F 22,67 F 22,74 F 22,96 F 23,86 F 24,68 F 25,24 F 25,83 F 26,43 F 26,92 F 27,21 F 27,52 F 27,92 F On request Nm 10.600 15.500 10.600 29.300 kW 01.119 01.626 01.119 03.074 ØP www.hpceurope.com - +33(0)4 37 496 496 YG1-590 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 68 70 72 73 74 76 78 80 84 88 90 96 100 112 120 130 150 PCD ØP 34,00 35,00 36,00 37,00 38,00 39,00 40,00 41,00 42,00 43,00 44,00 45,00 46,00 47,00 48,00 49,00 50,00 51,00 52,00 53,00 54,00 55,00 56,00 57,00 58,00 59,00 60,00 61,00 62,00 63,00 64,00 65,00 66,00 68,00 70,00 72,00 73,00 74,00 76,00 78,00 80,00 84,00 88,00 90,00 96,00 100,00 112,00 120,00 130,00 150,00 Outside ØD 36,00 37,00 38,00 39,00 40,00 41,00 42,00 43,00 44,00 45,00 46,00 47,00 48,00 49,00 50,00 51,00 52,00 53,00 54,00 55,00 56,00 57,00 58,00 59,00 60,00 61,00 62,00 63,00 64,00 65,00 66,00 67,00 68,00 70,00 72,00 74,00 75,00 76,00 78,00 80,00 82,00 86,00 90,00 92,00 98,00 102,00 114,00 122,00 132,00 152,00 Boss ØM 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 45 45 45 45 45 45 45 45 45 45 45 45 45 Weight (kg) Price each 1 to 5 Bore YG XG YG XG ØA Stock* 8 0,141 0,098 28,17 F 4 8 0,147 0,105 28,60 F - 8 0,170 0,111 28,87 F 4 8 0,176 0,118 29,17 F - 8 0,183 0,124 29,71 F - 8 0,190 0,131 30,22 F - 8 0,197 0,138 30,70 F 4 8 0,204 0,146 30,86 F - 8 0,212 0,153 30,99 F 4 8 0,220 0,161 31,07 F - 8 0,227 0,169 31,29 F - 8 0,235 0,177 31,41 F - 8 0,244 0,185 31,47 F - 8 0,252 0,193 31,65 F - 8 0,261 0,202 31,67 F 4 8 0,269 0,211 33,35 F - 10 0,297 0,216 34,95 F 4 10 0,307 0,225 35,52 F - 10 0,316 0,235 35,95 F 4 10 0,325 0,244 36,47 F - 10 0,335 0,254 36,92 F 4 10 0,345 0,264 37,50 F - 10 0,355 0,274 37,57 F 4 10 0,365 0,284 38,09 F 4 10 0,375 0,294 38,66 F - 10 0,386 0,305 39,12 F - 10 0,397 0,316 39,57 F 4 10 0,406 0,326 40,16 F - 10 0,419 0,338 40,83 F - 10 0,430 0,349 42,04 F - 10 0,441 0,360 42,81 F - 10 0,453 0,372 43,80 F - 10 0,465 0,384 44,69 F - 10 0,489 0,408 46,01 F - 10 0,514 0,433 46,96 F 4 10 0,539 0,458 47,97 F - 10 0,553 0,471 49,94 F - 10 0,614 0,485 50,47 F - 10 0,641 0,512 51,14 F - 10 0,669 0,539 51,95 F - 10 0,697 0,568 53,00 F 4 10 0,756 0,627 53,79 F - 10 0,818 0,689 55,04 F - 10 0,850 0,721 56,62 F 4 10 0,951 0,822 62,76 F - 10 1,022 0,892 63,58 F 4 10 1,251 1,122 73,13 F - 12 1,418 1,289 90,02 F 4 12 1,644 1,515 102,20 F - 15 2,149 2,019 119,74 F - On request Part number YG1-34 YG1-35 YG1-36 YG1-37 YG1-38 YG1-39 YG1-40 YG1-41 YG1-42 YG1-43 YG1-44 YG1-45 YG1-46 YG1-47 YG1-48 YG1-49 YG1-50 YG1-51 YG1-52 YG1-53 YG1-54 YG1-55 YG1-56 YG1-57 YG1-58 YG1-59 YG1-60 YG1-61 YG1-62 YG1-63 YG1-64 YG1-65 YG1-66 YG1-68 YG1-70 YG1-72 YG1-73 YG1-74 YG1-76 YG1-78 YG1-80 YG1-84 YG1-88 YG1-90 YG1-96 YG1-100 YG1-112 YG1-120 YG1-130 YG1-150 Gears available up to this size 590 590,00 592,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 235 Plastic spur gear Machined Delrin Module 1.0 - - - - ZG ZPG (optional) ØM  achined parts M Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 0.7 Nm ØP 8 14 6 ØD 8 24/48 hours in STOCK* otherwise contact us discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PCD ØP 10,00 11,00 12,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 Outside ØD 12,00 13,00 14,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 27,00 28,00 29,00 30,00 31,00 32,00 33,00 34,00 Boss ØM 12 12 12 12 12 12 12 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 18 18 *Depending on availability - Dimensions in mm 236 4 Volume  4 2013 HPC Bore Weight (kg) Price each 1 to 5 ØA Stock* ZG ZPG ZG ZPG 4 0,0015 0,0007 7,59 F 4 4 0,0016 0,0008 7,59 F 4 4 0,0018 0,0010 7,59 F - 4 0,0018 0,0010 7,59 F 4 4 0,0020 0,0012 7,79 F - 4 0,0022 0,0015 7,91 F 4 4 0,0025 0,0017 8,02 F 4 6 0,0029 0,0018 8,23 F 4 6 0,0032 0,0020 8,33 F - 6 0,0035 0,0023 8,53 F 4 6 0,0038 0,0026 8,55 F - 6 0,0041 0,0029 8,91 F 4 6 0,0050 0,0033 8,96 F - 6 0,0054 0,0036 9,11 F 4 6 0,0057 0,0040 9,11 F - 6 0,0061 0,0044 9,25 F 4 6 0,0065 0,0048 9,59 F 4 6 0,0069 0,0052 9,97 F 4 6 0,0073 0,0056 10,13 F 4 6 0,0078 0,0060 10,36 F - 6 0,0082 0,0065 10,61 F - 6 0,0087 0,0070 10,90 F 4 6 0,0092 0,0075 12,03 F - 6 0,0097 0,0080 12,24 F 4 On request Part number ZG1-9 ZG1-10 ZG1-11 ZG1-12 ZG1-13 ZG1-14 ZG1-15 ZG1-16 ZG1-17 ZG1-18 ZG1-19 ZG1-20 ZG1-21 ZG1-22 ZG1-23 ZG1-24 ZG1-25 ZG1-26 ZG1-27 ZG1-28 ZG1-29 ZG1-30 ZG1-31 ZG1-32 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 33 34 35 36 38 39 40 42 43 44 45 46 47 48 50 51 52 53 54 55 56 58 59 60 61 62 63 64 65 66 68 70 72 73 74 76 78 80 84 88 90 96 100 112 120 130 140 PCD ØP 33,00 34,00 35,00 36,00 38,00 39,00 40,00 42,00 43,00 44,00 45,00 46,00 47,00 48,00 50,00 51,00 52,00 53,00 54,00 55,00 56,00 58,00 59,00 60,00 61,00 62,00 63,00 64,00 65,00 66,00 68,00 70,00 72,00 73,00 74,00 76,00 78,00 80,00 84,00 88,00 90,00 96,00 100,00 112,00 120,00 130,00 140,00 ZG1-590 590 590,00 592,00 Outside ØD 35,00 36,00 37,00 38,00 40,00 41,00 42,00 44,00 45,00 46,00 47,00 48,00 49,00 50,00 52,00 53,00 54,00 55,00 56,00 57,00 58,00 60,00 61,00 62,00 63,00 64,00 65,00 66,00 67,00 68,00 70,00 72,00 74,00 75,00 76,00 78,00 80,00 82,00 86,00 90,00 92,00 98,00 102,00 114,00 122,00 132,00 142,00 Boss ØM 18 18 18 18 18 18 18 18 18 18 18 18 18 18 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 26 26 30 30 40 40 40 Bore ØA 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 12 12 12 - 4 4 4 4 4 4 - - 4 4 4 - 4 4 - - 4 - - - - - 4 4 - - - - - - 4 4 - 4 - - 4 - - 4 - - - - - 4 Weight (kg) Price each 1 to 5 ZG ZPG ZG ZPG 0,0103 0,0085 12,37 F 0,0108 0,0090 12,53 F 0,0114 0,0096 12,66 F 0,0119 0,0102 12,77 F 0,0131 0,0114 13,12 F 0,0137 0,0120 15,24 F 0,0144 0,0126 15,48 F 0,0157 0,0140 15,62 F 0,0164 0,0146 15,78 F 0,0171 0,0154 15,93 F 0,0178 0,0161 16,03 F 0,0186 0,0168 16,45 F 0,0193 0,0176 17,11 F 0,0201 0,0183 19,21 F 0,0222 0,0197 21,17 F 0,0230 0,0205 21,42 F 0,0239 0,0213 21,88 F 0,0247 0,0222 22,13 F 0,0256 0,0230 22,33 F 0,0265 0,0239 22,77 F 0,0274 0,0248 23,07 F 0,0292 0,0267 23,42 F 0,0302 0,0276 26,84 F 0,0311 0,0286 27,21 F 0,0321 0,0295 27,58 F 0,0331 0,0305 28,07 F 0,0341 0,0316 28,87 F 0,0351 0,0326 29,39 F 0,0362 0,0336 30,09 F 0,0372 0,0347 30,70 F 0,0394 0,0368 31,65 F 0,0416 0,0391 32,29 F 0,0439 0,0414 32,99 F 0,0451 0,0425 33,89 F 0,0463 0,0437 36,81 F 0,0487 0,0462 37,32 F 0,0512 0,0486 37,84 F 0,0537 0,0512 38,59 F 0,0590 0,0565 39,16 F 0,0646 0,0621 40,03 F 0,0686 0,0649 45,85 F 0,0777 0,0739 50,80 F 0,0840 0,0803 50,16 F 0,1045 0,1008 54,78 F 0,1195 0,1158 67,42 F 0,1397 0,1360 80,07 F 0,1616 0,1579 98,60 F On request Part number ZG1-33 ZG1-34 ZG1-35 ZG1-36 ZG1-38 ZG1-39 ZG1-40 ZG1-42 ZG1-43 ZG1-44 ZG1-45 ZG1-46 ZG1-47 ZG1-48 ZG1-50 ZG1-51 ZG1-52 ZG1-53 ZG1-54 ZG1-55 ZG1-56 ZG1-58 ZG1-59 ZG1-60 ZG1-61 ZG1-62 ZG1-63 ZG1-64 ZG1-65 ZG1-66 ZG1-68 ZG1-70 ZG1-72 ZG1-73 ZG1-74 ZG1-76 ZG1-78 ZG1-80 ZG1-84 ZG1-88 ZG1-90 ZG1-96 ZG1-100 ZG1-112 ZG1-120 ZG1-130 ZG1-140 Gears available up to this size *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 237 Moulded plastic spur gear Nylon 6 moulded Module 1.0 ole bored h A: Pre- e finished must b - M  oulded parts - Pressure angle 20° - Material: Nylon 6 Reinforced with 30% glass fibres CLG .Options. - A  lternative number of teeth, a datasheet is available from ØD www.hpceurope.com in PDF format - HPC are unable to modify these parts. For parts that can be modified to order, please see the ZG and ZPG ranges. ØM ØP ØA y range 15 Econom Part number CLG1-12 CLG1-15 CLG1-16 CLG1-20 CLG1-24 CLG1-25 CLG1-28 CLG1-30 CLG1-32 CLG1-35 CLG1-40 CLG1-45 CLG1-50 CLG1-55 CLG1-60 CLG1-70 CLG1-72 CLG1-75 CLG1-77 No. of teeth 12 15 16 20 24 25 28 30 32 35 40 45 50 55 60 70 72 75 77 Outside ØD 14 17 18 22 26 27 30 32 34 37 42 47 52 57 62 72 74 77 DISCOUNTS 25 Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request PCD ØP 12 15 16 20 24 25 28 30 32 35 40 45 50 55 60 70 72 75 Boss ØM 9 10 13 16 20 20 22 25 25 30 30 35 35 35 40 40 40 50 Bore ØA 4 4 5 5 6 6 6 6 6 8 8 10 10 14 14 20 20 20 77 50 20 Gears available up to this size 79 *Depending on availability - Dimensions in mm 238 4 Volume  4 2013 HPC Stock* 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 - Price each 1 to 9 3,48 F 3,48 F 3,65 F 3,65 F 3,83 F 3,83 F 4,76 F 4,76 F 4,95 F 4,95 F 5,85 F 6,25 F 6,98 F 7,54 F 8,48 F 9,78 F 9,78 F on request on request www.hpceurope.com - +33(0)4 37 496 496 Brass spur gear Brass CuZn40Pb3 Module 1.0 GB ØM - Quality standard 9 - Pressure angle 20° ØA H8 Torque and power indication For 50 teeth at 1000 rpm ØP Brass 34C10 1.250 0.134 2.600 0.254 Nm kW ØD 8 12 20 24/48 hours Part number GB1-12 GB1-15 GB1-18 GB1-20 GB1-22 GB1-25 GB1-28 GB1-30 GB1-32 GB1-36 GB1-40 GB1-44 GB1-48 GB1-50 GB1-54 GB1-56 GB1-60 GB1-64 GB1-66 GB1-70 GB1-80 GB1-90 GB1-100 GB1-590 Teeth Z 12 15 18 20 22 25 28 30 32 36 40 44 48 50 54 56 60 64 66 70 80 90 100 590 PCD ØP 12,00 15,00 18,00 20,00 22,00 25,00 28,00 30,00 32,00 36,00 40,00 44,00 48,00 50,00 54,00 56,00 60,00 64,00 66,00 70,00 80,00 90,00 100,00 DISCOUNTS in STOCK* 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request otherwise contact us Outside ØD 14,00 17,00 20,00 22,00 24,00 27,00 30,00 32,00 34,00 38,00 42,00 46,00 50,00 52,00 56,00 58,00 62,00 66,00 68,00 72,00 82,00 92,00 102,00 Boss ØM 14 12 15 15 15 15 15 20 20 20 20 20 20 30 30 30 30 30 30 30 30 30 30 Bore ØA 6 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 4 4 - 4 - 4 - 4 - - 4 - - 4 - - 4 - - - - - - Price each 1 to 5 13,52 F 14,05 F 15,03 F 15,54 F 17,06 F 18,54 F 20,06 F 22,08 F 23,57 F 25,09 F 26,34 F 28,59 F 35,12 F 36,64 F 43,15 F 44,67 F 46,42 F 49,21 F 50,19 F 55,22 F 97,88 F 125,52 F 190,78 F Dimensions: contact us On request Gears available up to this size 590,00 592,00 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Stock* Volume 4 2013 4 239 Stainless steel spur gear Stainless steel 303 MODULE 1.0 SSG - Quality standard 9 - Pressure angle 20° Torque and power indication For 50 teeth at 1000 rpm StS 303 brass fibre Nm 2.600 kW 0.254 1.250 0.134 ØM ØA H8 1 0.104 s steel stainles ØP ØD 7 12 Part Teeth PCD Outside Boss Bore number Z ØP ØD ØM ØA SSG1-12-303 12 12 14 14 6 SSG1-15-303 15 15 17 12 8 SSG1-16-303 16 16 18 12 8 SSG1-18-303 18 18 20 15 8 SSG1-20-303 20 20 22 15 8 SSG1-22-303 22 22 24 15 8 SSG1-24-303 24 24 26 15 8 SSG1-25-303 25 25 27 15 8 SSG1-26-303 26 26 28 15 8 SSG1-28-303 28 28 30 15 8 SSG1-30-303 30 30 32 20 8 SSG1-32-303 32 32 34 20 8 SSG1-36-303 36 36 38 20 8 SSG1-40-303 40 40 42 20 8 SSG1-44-303 44 44 46 20 8 SSG1-48-303 48 48 50 20 8 SSG1-50-303 50 50 52 30 10 SSG1-54-303 54 54 56 30 10 SSG1-56-303 56 56 58 30 10 SSG1-60-303 60 60 62 30 10 SSG1-64-303 64 64 66 30 10 SSG1-66-303 66 66 68 30 10 SSG1-70-303 70 70 72 30 10 SSG1-590-303 590 Gears available up to this size 590 592 *Depending on availability - Dimensions in mm 240 4 Volume  4 2013 HPC discounts Qty. 1+ 6+ 20+ Disc. List -12% On request 19 Stock* - - - - - - - - - - - - - - - - - - - - - - - Dimensions: contact us Price each 1 to 5 18,54 F 19,07 F 20,03 F 20,76 F 20,76 F 21,57 F 21,64 F 22,17 F 23,11 F 24,02 F 22,45 F 26,57 F 30,03 F 32,55 F 35,02 F 37,24 F 39,87 F 43,41 F 44,21 F 49,80 F 55,10 F 63,35 F 66,67 F On request www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 304L MODULE 1.0 SSG ØM - Quality standard 9 - Pressure angle 20° Torque and power indication For 50 teeth at 1000 rpm StS 304L brass fibre Nm 2.600 1.250 1 kW 0.254 0.134 0.104 ØA H8 ØP ØD 8 s steel stainles 12 20 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part Teeth PCD Outside Boss Bore number Z ØP ØD ØM ØA SSG1-12-304L 12 12 14 14 6 SSG1-15-304L 15 15 17 12 8 SSG1-16-304L 16 16 18 12 8 SSG1-18-304L 18 18 20 15 8 SSG1-20-304L 20 20 22 15 8 SSG1-22-304L 22 22 24 15 8 SSG1-24-304L 24 24 26 15 8 SSG1-25-304L 25 25 27 15 8 SSG1-26-304L 26 26 28 15 8 SSG1-28-304L 28 28 30 15 8 SSG1-30-304L 30 30 32 20 8 SSG1-32-304L 32 32 34 20 8 SSG1-36-304L 36 36 38 20 8 SSG1-40-304L 40 40 42 20 8 SSG1-44-304L 44 44 46 20 8 SSG1-48-304L 48 48 50 20 8 SSG1-50-304L 50 50 52 30 10 SSG1-54-304L 54 54 56 30 10 SSG1-56-304L 56 56 58 30 10 SSG1-60-304L 60 60 62 30 10 SSG1-64-304L 64 64 66 30 10 SSG1-66-304L 66 66 68 30 10 SSG1-70-304L 70 70 72 30 10 Price each 1 to 5 23,24 F 23,83 F 25,10 F 25,89 F 25,96 F 26,98 F 27,08 F 27,68 F 28,87 F 30,01 F 28,07 F 33,22 F 37,49 F 40,68 F 43,68 F 46,51 F 49,77 F 54,17 F 55,12 F 62,19 F 68,74 F 78,98 F 83,14 F SSG1-590-304L 590 On request Gears available up to this size 590 592 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 241 Stainless steel spur gear Stainless steel 316L MODULE 1.0 SSG - Quality standard 9 - Pressure angle 20° ØM Torque and power indication For 50 teeth at 1000 rpm StS 316L brass fibre ØA H8 Nm 2.600 1.250 1 kW 0.254 0.134 0.104 s steel ØP ØD 10 12 stainles 22 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part Teeth PCD Outside Boss Bore number Z ØP ØD ØM ØA SSG1-12-316L 12 12 14 14 6 SSG1-15-316L 15 15 17 12 8 SSG1-16-316L 16 16 18 12 8 SSG1-18-316L 18 18 20 15 8 SSG1-20-316L 20 20 22 15 8 SSG1-22-316L 22 22 24 15 8 SSG1-24-316L 24 24 26 15 8 SSG1-25-316L 25 25 27 15 8 SSG1-26-316L 26 26 28 15 8 SSG1-28-316L 28 28 30 15 8 SSG1-30-316L 30 30 32 20 8 SSG1-32-316L 32 32 34 20 8 SSG1-36-316L 36 36 38 20 8 SSG1-40-316L 40 40 42 20 8 SSG1-44-316L 44 44 46 20 8 SSG1-48-316L 48 48 50 20 8 SSG1-50-316L 50 50 52 30 10 SSG1-54-316L 54 54 56 30 10 SSG1-56-316L 56 56 58 30 10 SSG1-60-316L 60 60 62 30 10 SSG1-64-316L 64 64 66 30 10 SSG1-66-316L 66 66 68 30 10 SSG1-70-316L 70 70 72 30 10 SSG1-590-316L 590 Gears available up to this size 590 592 *Depending on availability - Dimensions in mm 242 4 Volume  4 2013 HPC Dimensions: contact us Price each 1 to 5 34,78 F 35,76 F 37,56 F 38,95 F 38,95 F 40,45 F 40,60 F 41,58 F 43,33 F 45,04 F 42,09 F 49,83 F 56,32 F 61,06 F 65,65 F 69,83 F 74,77 F 81,42 F 82,92 F 93,39 F 103,33 F 118,78 F 125,04 F On request www.hpceurope.com - +33(0)4 37 496 496 Free delivery * For orders over 50,00 excl. VAT mainland France only www.hpceurope.com - +33(0)4 37 496 496 *Products less than 1m in length only Steel spur gear Module 1.5 Steel 34C10 G PG (optional) ØM - P  recision class 9 - Pressure angle 20° - Linear speed 300m/min 24/48 hours 8.88 0.93 41.50 4.23 4.44 0.46 3.55 0.37 ØP 12 25 in STOCK* Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ØD 12 DISCOUNTS otherwise contact us Part number G1.25-9 G1.25-10 G1.25-11 G1.25-12 G1.25-13 G1.25-14 G1.25-15 G1.25-16 G1.25-17 G1.25-18 G1.25-19 G1.25-20 G1.25-21 G1.25-22 G1.25-23 G1.25-24 G1.25-25 G1.25-26 G1.25-27 G1.25-28 G1.25-29 G1.25-30 G1.25-31 G1.25-32 G1.25-33 13 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Weight (kg) Price each 1 to 5 Bore PCD Outside Boss Stock* G PG ØD ØM ØA G PG ØP 12,50 15,00 15,00 6 0,019 0,006 4 64,38 F 13,75 16,25 16,25 6 0,024 0,007 4 19,73 F 15,00 17,50 17,50 6 0,029 0,009 - 19,73 F 15,00 17,50 17,50 6 0,029 0,009 4 19,73 F 16,25 18,75 18,25 6 0,032 0,011 - 20,66 F 17,50 20,00 20,00 6 0,039 0,013 4 21,03 F 18,75 21,25 12,00 6 0,023 0,015 4 21,39 F 20,00 22,50 12,00 8 0,022 0,016 4 22,13 F 21,25 23,75 12,00 8 0,024 0,019 4 22,70 F 22,50 25,00 15,00 8 0,033 0,021 4 23,25 F 23,75 26,25 15,00 8 0,036 0,024 - 24,18 F 25,00 27,50 15,00 8 0,039 0,027 4 24,51 F 26,25 28,75 15,00 8 0,042 0,030 - 24,86 F 27,50 30,00 15,00 8 0,045 0,033 4 25,09 F 28,75 31,25 15,00 8 0,048 0,037 - 25,39 F 30,00 32,50 15,00 8 0,052 0,040 4 25,83 F 31,25 33,75 15,00 8 0,055 0,044 - 26,39 F 32,50 35,00 15,00 8 0,059 0,048 4 26,69 F 33,75 36,25 15,00 8 0,063 0,052 - 27,30 F 35,00 37,50 15,00 8 0,067 0,056 4 28,48 F 36,25 38,75 15,00 8 0,072 0,060 4 29,22 F 37,50 40,00 20,00 8 0,089 0,065 - 30,19 F 38,75 41,25 20,00 8 0,093 0,069 - 30,82 F 40,00 42,50 20,00 8 0,098 0,074 4 31,44 F 41,25 43,75 20,00 8 0,103 0,079 - 32,03 F On request Nm kW ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass *Depending on availability - Dimensions in mm 244 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 68 70 72 73 74 76 78 80 84 88 90 96 100 112 120 130 140 G1.25-142 142 PCD ØP 42,50 43,75 45,00 46,25 47,50 48,75 50,00 51,25 52,50 53,75 55,00 56,25 57,50 58,75 60,00 61,25 62,50 63,75 65,00 66,25 67,50 68,75 70,00 71,25 72,50 73,75 75,00 76,25 77,50 78,75 80,00 81,25 82,50 85,00 87,50 90,00 91,25 92,50 95,00 97,50 100,00 105,00 110,00 112,50 120,00 125,00 140,00 150,00 162,50 175,00 Outside ØD 45,00 46,25 47,50 48,75 50,00 51,25 52,50 53,75 55,00 56,25 57,50 58,75 60,00 61,25 62,50 63,75 65,00 66,25 67,50 68,75 70,00 71,25 72,50 73,75 75,00 76,25 77,50 78,75 80,00 81,25 82,50 83,75 85,00 87,50 90,00 92,50 93,75 95,00 97,50 100,00 102,50 107,50 112,50 115,00 122,50 127,50 142,50 152,50 165,00 177,50 Boss ØM 20,00 20,00 20,00 20,00 20,00 20,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 40,00 40,00 40,00 Bore Weight (kg) ØA G PG 8 0,108 0,084 8 0,113 0,089 8 0,119 0,094 8 0,124 0,100 8 0,130 0,105 8 0,135 0,111 10 0,173 0,115 10 0,179 0,121 10 0,185 0,128 10 0,192 0,134 10 0,198 0,141 10 0,205 0,147 10 0,212 0,154 10 0,219 0,161 10 0,226 0,168 10 0,233 0,176 10 0,241 0,183 10 0,248 0,191 10 0,256 0,198 10 0,264 0,206 10 0,272 0,214 10 0,280 0,222 10 0,288 0,231 10 0,297 0,239 10 0,306 0,248 10 0,314 0,257 10 0,323 0,266 10 0,332 0,275 10 0,342 0,284 10 0,351 0,293 10 0,361 0,303 10 0,370 0,313 10 0,380 0,322 10 0,400 0,343 10 0,421 0,363 10 0,442 0,385 10 0,453 0,396 10 0,464 0,407 10 0,487 0,429 10 0,510 0,452 10 0,534 0,476 10 0,583 0,525 10 0,635 0,577 10 0,661 0,604 12 0,745 0,688 12 0,804 0,746 12 0,995 0,938 15 1,135 1,077 15 1,323 1,265 15 1,525 1,468 Gears available up to this size 177,50 180,00 *Depending on availability - Dimensions in mm Stock* Price each 1 to 5 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 4 - 4 - - - 4 4 - - - 4 - - - - 4 - - 4 - - - - - - 4 - - - - - - - 4 - - - - - - - - 4 - - - - - - G 32,45 F 33,18 F 33,59 F 33,92 F 34,29 F 34,74 F 34,97 F 35,13 F 35,29 F 35,52 F 35,65 F 35,80 F 35,92 F 36,15 F 36,27 F 37,05 F 37,35 F 37,74 F 38,09 F 38,45 F 38,70 F 38,98 F 40,68 F 42,59 F 43,13 F 44,09 F 45,07 F 45,47 F 46,15 F 46,60 F 47,12 F 47,76 F 48,43 F 49,55 F 50,46 F 50,71 F 50,95 F 51,25 F 52,15 F 53,96 F 57,54 F 58,05 F 63,80 F 64,38 F 74,08 F 75,26 F 83,27 F 89,07 F 99,27 F 107,27 F PG On request Part number G1.25-34 G1.25-35 G1.25-36 G1.25-37 G1.25-38 G1.25-39 G1.25-40 G1.25-41 G1.25-42 G1.25-43 G1.25-44 G1.25-45 G1.25-46 G1.25-47 G1.25-48 G1.25-49 G1.25-50 G1.25-51 G1.25-52 G1.25-53 G1.25-54 G1.25-55 G1.25-56 G1.25-57 G1.25-58 G1.25-59 G1.25-60 G1.25-61 G1.25-62 G1.25-63 G1.25-64 G1.25-65 G1.25-66 G1.25-68 G1.25-70 G1.25-72 G1.25-73 G1.25-74 G1.25-76 G1.25-78 G1.25-80 G1.25-84 G1.25-88 G1.25-90 G1.25-96 G1.25-100 G1.25-112 G1.25-120 G1.25-130 G1.25-140 On request Volume 4 2013 4 245 HEAVY DUTY spur gear Steel 35NCD6 Module 1.25 - - - - YG ØM  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Nm kW Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened 17 1.79 24 2.604 17 1.79 XG (optional) 17 13 ØD 17 30 47 5.013 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Dimensions in mm PCD ØP 12,50 13,75 15,00 15,00 16,25 17,50 18,75 20,00 21,25 22,50 23,75 25,00 26,25 27,50 28,75 30,00 31,25 32,50 33,75 35,00 36,25 37,50 38,75 40,00 41,25 246 4 Volume  4 2013 Outside ØD 15,00 16,25 17,50 17,50 18,75 20,00 21,25 22,50 23,75 25,00 26,25 27,50 28,75 30,00 31,25 32,50 33,75 35,00 36,25 37,50 38,75 40,00 41,25 42,50 43,75 Boss ØM 15,00 16,25 17,50 17,50 18,75 20,00 20,00 20,00 20,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 25,00 35,00 35,00 35,00 35,00 HPC Bore ØA 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Weight (kg) YG XG 0,027 0,012 0,033 0,016 0,040 0,019 0,040 0,019 0,048 0,023 0,056 0,028 0,061 0,032 0,061 0,034 0,066 0,040 0,089 0,045 0,095 0,051 0,101 0,057 0,108 0,064 0,115 0,071 0,122 0,078 0,129 0,085 0,137 0,093 0,145 0,101 0,154 0,110 0,162 0,119 0,172 0,128 0,228 0,137 0,238 0,147 0,248 0,157 0,258 0,167 Price each 1 to 5 YG XG 24,56 F 24,56 F 24,56 F 24,56 F 25,77 F 26,19 F 26,74 F 27,52 F 28,23 F 29,04 F 30,11 F 30,54 F 30,99 F 31,29 F 31,67 F 32,18 F 32,85 F 33,23 F 34,03 F 35,57 F 36,47 F 37,64 F 38,45 F 39,23 F 39,96 F On request Part number YG1.25-9 YG1.25-10 YG1.25-11 YG1.25-12 YG1.25-13 YG1.25-14 YG1.25-15 YG1.25-16 YG1.25-17 YG1.25-18 YG1.25-19 YG1.25-20 YG1.25-21 YG1.25-22 YG1.25-23 YG1.25-24 YG1.25-25 YG1.25-26 YG1.25-27 YG1.25-28 YG1.25-29 YG1.25-30 YG1.25-31 YG1.25-32 YG1.25-33 www.hpceurope.com - +33(0)4 37 496 496 PCD Outside Boss ØP ØD ØM 42,50 45,00 35,00 43,75 46,25 35,00 45,00 47,50 35,00 46,25 48,75 35,00 47,50 50,00 35,00 48,75 51,25 35,00 50,00 52,50 45,00 51,25 53,75 45,00 52,50 55,00 45,00 53,75 56,25 45,00 55,00 57,50 45,00 56,25 58,75 45,00 57,50 60,00 45,00 58,75 61,25 45,00 60,00 62,50 45,00 61,25 63,75 45,00 62,50 65,00 45,00 63,75 66,25 45,00 65,00 67,50 45,00 66,25 68,75 45,00 67,50 70,00 45,00 68,75 71,25 45,00 70,00 72,50 45,00 71,25 73,75 45,00 72,50 75,00 45,00 73,75 76,25 45,00 75,00 77,50 45,00 76,25 78,75 45,00 77,50 80,00 60,00 78,75 81,25 60,00 80,00 82,50 60,00 81,25 83,75 60,00 82,50 85,00 60,00 85,00 87,50 60,00 87,50 90,00 60,00 90,00 92,50 60,00 91,25 93,75 60,00 92,50 95,00 60,00 95,00 97,50 60,00 97,50 100,00 60,00 100,00 102,50 60,00 105,00 107,50 60,00 110,00 112,50 60,00 112,50 115,00 60,00 120,00 122,50 60,00 125,00 127,50 60,00 140,00 142,50 60,00 150,00 152,50 60,00 162,50 165,00 60,00 175,00 177,50 60,00 YG1.25-142 177,50 142 Dimensions in mm Bore ØA 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 15 15 15 Weight (kg) YG XG 0,269 0,178 0,280 0,189 0,291 0,200 0,303 0,212 0,315 0,224 0,327 0,236 0,396 0,245 0,409 0,258 0,422 0,271 0,435 0,285 0,449 0,299 0,463 0,313 0,478 0,328 0,493 0,342 0,508 0,358 0,523 0,373 0,539 0,389 0,555 0,405 0,572 0,421 0,589 0,438 0,606 0,455 0,623 0,473 0,641 0,490 0,659 0,508 0,677 0,527 0,696 0,545 0,715 0,564 0,734 0,584 0,877 0,603 0,897 0,623 0,917 0,644 0,938 0,664 0,959 0,685 1,001 0,728 1,045 0,772 1,091 0,817 1,114 0,841 1,137 0,864 1,185 0,912 1,234 0,961 1,285 1,011 1,390 1,116 1,499 1,226 1,556 1,283 1,734 1,461 1,860 1,586 2,266 1,992 2,562 2,289 2,961 2,688 3,392 3,119 Gears available up to this size 180,00 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 YG XG 40,48 F 41,36 F 41,95 F 42,26 F 42,74 F 43,28 F 43,64 F 43,89 F 44,07 F 44,25 F 44,47 F 44,67 F 44,82 F 45,04 F 45,22 F 46,21 F 46,63 F 47,00 F 47,59 F 47,81 F 48,24 F 48,62 F 50,73 F 53,10 F 53,79 F 55,04 F 56,15 F 58,01 F 57,54 F 58,05 F 58,72 F 59,52 F 60,31 F 61,78 F 62,85 F 63,28 F 63,50 F 63,92 F 64,99 F 67,28 F 71,78 F 72,45 F 79,53 F 92,27 F 92,92 F 93,73 F 119,20 F 119,20 F 129,58 F 150,79 F On request Teeth Part number Z YG1.25-34 34 YG1.25-35 35 YG1.25-36 36 YG1.25-37 37 YG1.25-38 38 YG1.25-39 39 YG1.25-40 40 YG1.25-41 41 YG1.25-42 42 YG1.25-43 43 YG1.25-44 44 YG1.25-45 45 YG1.25-46 46 YG1.25-47 47 YG1.25-48 48 YG1.25-49 49 YG1.25-50 50 YG1.25-51 51 YG1.25-52 52 YG1.25-53 53 YG1.25-54 54 YG1.25-55 55 YG1.25-56 56 YG1.25-57 57 YG1.25-58 58 YG1.25-59 59 YG1.25-60 60 YG1.25-61 61 YG1.25-62 62 YG1.25-63 63 YG1.25-64 64 YG1.25-65 65 YG1.25-66 66 YG1.25-68 68 YG1.25-70 70 YG1.25-72 72 YG1.25-73 73 YG1.25-74 74 YG1.25-76 76 YG1.25-78 78 YG1.25-80 80 YG1.25-84 84 YG1.25-88 88 YG1.25-90 90 YG1.25-96 96 YG1.25-100 100 YG1.25-112 112 YG1.25-120 120 YG1.25-130 130 YG1.25-140 140 On request Volume 4 2013 4 247 Plastic spur gear Machined Delrin Module 1.25 - - - - ZG ZPG (optional) Machined parts Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØM ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 1.0 Nm ØP 10 ØD 8 10 18 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Dimensions in mm PCD ØP 12,50 13,75 15,00 15,00 16,25 17,50 18,75 20,00 21,25 22,50 23,75 25,00 26,25 27,50 28,75 30,00 31,25 32,50 33,75 35,00 36,25 37,50 38,75 248 4 Volume  4 2013 Outside ØD 15,00 16,25 17,50 17,50 18,75 20,00 21,25 22,50 23,75 25,00 26,25 27,50 28,75 30,00 31,25 32,50 33,75 35,00 36,25 37,50 38,75 40,00 41,25 Boss ØM 15 15 15 15 15 15 15 16 16 16 16 16 18 18 18 18 18 18 18 18 18 18 18 HPC Bore ØA 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Weight (kg) ZG ZPG 0,003 0,001 0,003 0,002 0,004 0,002 0,004 0,002 0,004 0,002 0,004 0,003 0,005 0,003 0,005 0,004 0,006 0,004 0,007 0,005 0,007 0,005 0,008 0,006 0,009 0,007 0,010 0,007 0,010 0,008 0,011 0,009 0,012 0,009 0,013 0,010 0,013 0,011 0,014 0,012 0,015 0,013 0,016 0,014 0,017 0,015 Price each 1 to 5 ZG ZPG 9,87 F 9,87 F 9,87 F 9,87 F 9,87 F 9,97 F 10,24 F 10,50 F 10,90 F 11,12 F 12,16 F 12,29 F 12,47 F 12,55 F 14,02 F 14,30 F 14,54 F 14,73 F 15,11 F 15,78 F 16,14 F 16,68 F 19,41 F On request Part number ZG1.25-9 ZG1.25-10 ZG1.25-11 ZG1.25-12 ZG1.25-13 ZG1.25-14 ZG1.25-15 ZG1.25-16 ZG1.25-17 ZG1.25-18 ZG1.25-19 ZG1.25-20 ZG1.25-21 ZG1.25-22 ZG1.25-23 ZG1.25-24 ZG1.25-25 ZG1.25-26 ZG1.25-27 ZG1.25-28 ZG1.25-29 ZG1.25-30 ZG1.25-31 www.hpceurope.com - +33(0)4 37 496 496 PCD Outside ØP ØD 40,00 42,50 41,25 43,75 42,50 45,00 43,75 46,25 45,00 47,50 47,50 50,00 48,75 51,25 50,00 52,50 51,25 53,75 52,50 55,00 55,00 57,50 56,25 58,75 57,50 60,00 58,75 61,25 60,00 62,50 61,25 63,75 62,50 65,00 63,75 66,25 65,00 67,50 66,25 68,75 67,50 70,00 68,75 71,25 70,00 72,50 71,25 73,75 72,50 75,00 73,75 76,25 75,00 77,50 76,25 78,75 77,50 80,00 78,75 81,25 80,00 82,50 81,25 83,75 82,50 85,00 85,00 87,50 87,50 90,00 90,00 92,50 91,25 93,75 92,50 95,00 95,00 97,50 97,50 100,00 100,00 102,50 105,00 107,50 110,00 112,50 112,50 115,00 120,00 122,50 125,00 127,50 140,00 142,50 150,00 152,50 ZG1.25-142 142 177,50 180,00 Dimensions in mm Boss ØM 18 18 18 18 18 18 18 22 22 22 22 22 22 22 22 22 22 22 22 22 22 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 30 30 30 30 30 30 30 40 Bore ØA 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 15 Weight (kg) ZG ZPG 0,018 0,016 0,019 0,017 0,020 0,018 0,021 0,019 0,022 0,020 0,025 0,022 0,026 0,024 0,028 0,025 0,029 0,026 0,031 0,027 0,033 0,030 0,035 0,031 0,036 0,033 0,038 0,034 0,039 0,036 0,041 0,037 0,042 0,039 0,044 0,040 0,045 0,042 0,047 0,044 0,049 0,045 0,051 0,047 0,053 0,048 0,055 0,050 0,057 0,052 0,059 0,054 0,060 0,056 0,062 0,058 0,064 0,060 0,066 0,062 0,068 0,064 0,070 0,066 0,072 0,068 0,077 0,072 0,081 0,076 0,085 0,081 0,088 0,083 0,090 0,085 0,095 0,090 0,100 0,095 0,106 0,100 0,117 0,110 0,128 0,121 0,133 0,127 0,151 0,144 0,163 0,157 0,203 0,197 0,233 0,226 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 19,77 F 20,16 F 20,42 F 20,88 F 21,17 F 21,55 F 26,25 F 26,43 F 26,53 F 26,69 F 26,95 F 27,05 F 27,16 F 30,99 F 31,07 F 31,78 F 32,02 F 32,38 F 32,68 F 32,93 F 33,11 F 33,44 F 34,91 F 36,45 F 36,97 F 40,03 F 40,93 F 41,34 F 41,95 F 42,30 F 42,74 F 43,33 F 43,86 F 45,06 F 45,79 F 51,22 F 51,46 F 51,72 F 52,62 F 54,49 F 63,87 F 57,21 F 62,92 F 63,43 F 79,61 F 80,82 F 104,41 F 103,49 F On request Teeth Part number Z ZG1.25-32 32 ZG1.25-33 33 ZG1.25-34 34 ZG1.25-35 35 ZG1.25-36 36 ZG1.25-38 38 ZG1.25-39 39 ZG1.25-40 40 ZG1.25-41 41 ZG1.25-42 42 ZG1.25-44 44 ZG1.25-45 45 ZG1.25-46 46 ZG1.25-47 47 ZG1.25-48 48 ZG1.25-49 49 ZG1.25-50 50 ZG1.25-51 51 ZG1.25-52 52 ZG1.25-53 53 ZG1.25-54 54 ZG1.25-55 55 ZG1.25-56 56 ZG1.25-57 57 ZG1.25-58 58 ZG1.25-59 59 ZG1.25-60 60 ZG1.25-61 61 ZG1.25-62 62 ZG1.25-63 63 ZG1.25-64 64 ZG1.25-65 65 ZG1.25-66 66 ZG1.25-68 68 ZG1.25-70 70 ZG1.25-72 72 ZG1.25-73 73 ZG1.25-74 74 ZG1.25-76 76 ZG1.25-78 78 ZG1.25-80 80 ZG1.25-84 84 ZG1.25-88 88 ZG1.25-90 90 ZG1.25-96 96 ZG1.25-100 100 ZG1.25-112 112 ZG1.25-120 120 On request Volume 4 2013 4 249 Steel spur gear Module 1.5 Steel 34C10 G PG (optional) ØM - P  recision class 9 - Pressure angle 20° - Linear speed 300m/min Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 24/48 hours 8.88 0.93 41.50 4.23 4.44 0.46 3.55 0.37 ØP 12 25 PCD Outside ØP ØD 15,00 18,00 16,50 19,50 18,00 21,00 18,00 21,00 19,50 22,50 21,00 24,00 22,50 25,50 24,00 27,00 25,50 28,50 27,00 30,00 28,50 31,50 30,00 33,00 31,50 34,50 33,00 36,00 34,50 37,50 36,00 39,00 37,50 40,50 39,00 42,00 40,50 43,50 42,00 45,00 43,50 46,50 45,00 48,00 46,50 49,50 48,00 51,00 49,50 52,50 51,00 54,00 Boss ØM 18 18 18 14 15 15 18 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 *Depending on availability - Dimensions in mm 250 4 Volume  4 2013 12 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request otherwise contact us Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 ØD DISCOUNTS in STOCK* Part number G1.5-9 G1.5-10 G1.5-11 G1.5-12 G1.5-13 G1.5-14 G1.5-15 G1.5-16 G1.5-17 G1.5-18 G1.5-19 G1.5-20 G1.5-21 G1.5-22 G1.5-23 G1.5-24 G1.5-25 G1.5-26 G1.5-27 G1.5-28 G1.5-29 G1.5-30 G1.5-31 G1.5-32 G1.5-33 G1.5-34 13 HPC Bore Stock* Weight (kg) G PG ØA 8 0,032 0,012 4 8 0,035 0,015 4 8 0,039 0,019 - 8 0,029 0,019 4 8 0,035 0,023 4 8 0,040 0,027 4 8 0,052 0,032 4 10 0,058 0,034 4 10 0,063 0,040 4 10 0,069 0,045 4 10 0,075 0,051 4 10 0,081 0,058 4 10 0,088 0,064 4 10 0,095 0,071 4 10 0,102 0,079 4 10 0,127 0,086 4 10 0,135 0,094 4 10 0,144 0,102 - 10 0,152 0,111 4 10 0,161 0,120 4 10 0,170 0,129 - 10 0,180 0,139 4 10 0,190 0,149 4 10 0,200 0,159 4 10 0,211 0,170 4 10 0,221 0,180 4 Price each 1 to 5 G PG 19,75 F 19,75 F 19,75 F 9,70 F 19,41 F 19,89 F 10,51 F 10,80 F 21,57 F 17,69 F 23,07 F 12,51 F 12,51 F 12,78 F 25,14 F 13,13 F 26,74 F 28,00 F 28,87 F 29,73 F 30,22 F 16,08 F 31,58 F 16,63 F 32,45 F 32,76 F On request Nm kW ØA H8 www.hpceurope.com - +33(0)4 37 496 496 G1.5-298 Teeth Z 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 298 PCD ØP 52,50 54,00 55,50 57,00 58,50 60,00 61,50 63,00 64,50 66,00 67,50 69,00 70,50 72,00 73,50 75,00 76,50 78,00 79,50 81,00 82,50 84,00 85,50 87,00 88,50 90,00 93,00 96,00 97,50 99,00 102,00 105,00 106,50 108,00 109,50 111,00 112,50 114,00 117,00 120,00 129,00 135,00 144,00 147,00 150,00 157,50 165,00 172,50 180,00 Outside Boss ØD ØM 55,50 30 57,00 30 58,50 30 60,00 30 61,50 30 63,00 40 64,50 40 66,00 40 67,50 40 69,00 40 70,50 40 72,00 40 73,50 40 75,00 40 76,50 40 78,00 40 79,50 40 81,00 40 82,50 40 84,00 40 85,50 40 87,00 40 88,50 40 90,00 40 91,50 40 93,00 40 96,00 40 99,00 40 100,50 40 102,00 40 105,00 40 108,00 40 109,50 50 111,00 50 112,50 50 114,00 50 115,50 50 117,00 50 120,00 50 123,00 50 132,00 50 138,00 50 147,00 50 150,00 50 153,00 50 160,50 50 168,00 50 175,50 50 183,00 50 Bore ØA 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Weight (kg) Price each 1 to 5 Stock* G PG G PG - 4 4 4 4 4 - 4 - 4 - 4 - 4 4 4 4 4 - 4 - 4 - - - 4 - - 4 - - 4 - - - - - - - 4 - 4 - - 4 - - - - 0,235 0,247 0,259 0,271 0,283 0,351 0,364 0,377 0,391 0,405 0,420 0,435 0,450 0,465 0,481 0,497 0,513 0,530 0,547 0,564 0,582 0,600 0,618 0,637 0,656 0,675 0,715 0,756 0,777 0,798 0,842 0,886 0,980 1,003 1,026 1,050 1,074 1,099 1,149 1,200 1,362 1,476 1,657 1,720 1,784 1,951 2,125 2,308 2,498 Gears available up to this size 447,00 450,00 *Depending on availability 0,183 0,194 0,206 0,218 0,231 0,243 0,257 0,270 0,284 0,298 0,312 0,327 0,342 0,358 0,373 0,389 0,406 0,423 0,440 0,457 0,475 0,493 0,511 0,530 0,549 0,568 0,608 0,648 0,669 0,691 0,734 0,779 0,802 0,825 0,849 0,872 0,897 0,921 0,971 1,022 1,184 1,298 1,479 1,542 1,606 1,773 1,947 2,130 2,320 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 33,13 F 18,00 F 35,59 F 36,36 F 37,13 F 37,92 F 37,92 F 37,96 F 38,02 F 38,02 F 38,79 F 39,64 F 40,59 F 41,45 F 41,45 F 46,32 F 47,73 F 48,70 F 49,48 F 49,66 F 49,87 F 50,28 F 50,73 F 50,73 F 51,25 F 51,54 F 52,55 F 53,20 F 54,49 F 56,48 F 57,77 F 59,83 F 61,49 F 63,28 F 64,80 F 67,03 F 67,42 F 67,70 F 71,11 F 73,71 F 79,21 F 84,85 F 90,46 F 96,08 F 102,35 F 109,04 F 117,66 F 131,04 F 146,47 F On request Part number G1.5-35 G1.5-36 G1.5-37 G1.5-38 G1.5-39 G1.5-40 G1.5-41 G1.5-42 G1.5-43 G1.5-44 G1.5-45 G1.5-46 G1.5-47 G1.5-48 G1.5-49 G1.5-50 G1.5-51 G1.5-52 G1.5-53 G1.5-54 G1.5-55 G1.5-56 G1.5-57 G1.5-58 G1.5-59 G1.5-60 G1.5-62 G1.5-64 G1.5-65 G1.5-66 G1.5-68 G1.5-70 G1.5-71 G1.5-72 G1.5-73 G1.5-74 G1.5-75 G1.5-76 G1.5-78 G1.5-80 G1.5-86 G1.5-90 G1.5-96 G1.5-98 G1.5-100 G1.5-105 G1.5-110 G1.5-115 G1.5-120 On request Volume 4 2013 4 251 HEAVY DUTY spur gear Steel 35NCD6 Module 1.5 YG XG (option) ØM  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened 20 15 35 ØD 20 Nm 32 46 32 88 kW 3.342 4.879 3.342 8.952 Part number YG1.5-9 YG1.5-10 YG1.5-11 YG1.5-12 YG1.5-13 YG1.5-14 YG1.5-15 YG1.5-16 YG1.5-17 YG1.5-18 YG1.5-19 YG1.5-20 YG1.5-21 YG1.5-22 YG1.5-23 YG1.5-24 YG1.5-25 YG1.5-26 YG1.5-27 YG1.5-28 YG1.5-29 YG1.5-30 YG1.5-31 YG1.5-32 YG1.5-33 Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PCD ØP 15,00 16,50 18,00 18,00 19,50 21,00 22,50 24,00 25,50 27,00 28,50 30,00 31,50 33,00 34,50 36,00 37,50 39,00 40,50 42,00 43,50 45,00 46,50 48,00 49,50 Outside ØD 18,00 19,50 21,00 21,00 22,50 24,00 25,50 27,00 28,50 30,00 31,50 33,00 34,50 36,00 37,50 39,00 40,50 42,00 43,50 45,00 46,50 48,00 49,50 51,00 52,50 Boss ØM 18,00 19,50 21,00 21,00 20,00 20,00 20,00 25,00 25,00 25,00 25,00 25,00 25,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 *Depending on availability - Dimensions in mm 252 4 Volume  4 2013 HPC 24/48 hours in STOCK* otherwise contact us DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Bore ØA 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Weight (kg) Price each 1 to 5 Stock* YG XG YG XG 4 4 - 4 4 - 4 4 - - - 4 - 4 - 4 4 - 4 4 - 4 - - 4 0,043 0,054 0,065 0,065 0,068 0,076 0,083 0,105 0,113 0,123 0,133 0,143 0,155 0,191 0,203 0,216 0,229 0,243 0,257 0,272 0,288 0,304 0,320 0,337 0,355 0,019 0,025 0,031 0,031 0,038 0,045 0,053 0,057 0,066 0,076 0,086 0,096 0,107 0,119 0,131 0,144 0,157 0,171 0,185 0,200 0,215 0,231 0,248 0,265 0,283 24,64 F 24,64 F 24,64 F 23,47 F 24,18 F 24,78 F 25,42 F 26,13 F 26,92 F 27,82 F 29,04 F 30,22 F 30,54 F 30,86 F 31,29 F 31,67 F 33,35 F 34,91 F 35,95 F 37,10 F 37,70 F 38,79 F 39,36 F 40,16 F 40,48 F On request - - - - www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 PCD ØP 51,00 52,50 54,00 55,50 57,00 58,50 60,00 61,50 63,00 64,50 66,00 67,50 69,00 70,50 72,00 73,50 75,00 76,50 78,00 79,50 81,00 82,50 84,00 85,50 87,00 88,50 90,00 93,00 96,00 97,50 99,00 102,00 105,00 106,50 108,00 109,50 111,00 112,50 114,00 117,00 120,00 129,00 135,00 144,00 147,00 150,00 157,50 165,00 172,50 180,00 YG1.5-298 298 447,00 450,00 Outside ØD 54,00 55,50 57,00 58,50 60,00 61,50 63,00 64,50 66,00 67,50 69,00 70,50 72,00 73,50 75,00 76,50 78,00 79,50 81,00 82,50 84,00 85,50 87,00 88,50 90,00 91,50 93,00 96,00 99,00 100,50 102,00 105,00 108,00 109,50 111,00 112,50 114,00 115,50 117,00 120,00 123,00 132,00 138,00 147,00 150,00 153,00 160,50 168,00 175,50 183,00 Boss ØM 30,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 Price each 1 to 5 Bore Stock* Weight (kg) YG XG YG XG ØA 10 0,373 0,301 40,83 F - 15 0,509 0,304 41,34 F - 15 0,529 0,323 43,41 F - 15 0,548 0,343 44,30 F - 15 0,569 0,363 45,33 F 4 15 0,589 0,384 46,26 F - 15 0,611 0,406 47,27 F 4 15 0,633 0,428 47,32 F - 15 0,655 0,450 47,39 F - 15 0,678 0,473 47,41 F - 15 0,702 0,497 47,81 F - 15 0,726 0,521 48,43 F - 15 0,750 0,545 49,48 F - 15 0,775 0,570 50,56 F - 15 0,801 0,596 51,65 F - 15 0,827 0,622 53,96 F - 15 0,854 0,649 58,70 F 4 15 0,881 0,676 59,49 F - 15 0,909 0,704 60,67 F - 15 1,037 0,733 61,57 F - 15 1,066 0,762 61,88 F 4 15 1,095 0,791 62,23 F - 15 1,125 0,821 62,67 F - 15 1,156 0,852 63,28 F - 15 1,187 0,883 63,58 F - 15 1,219 0,914 63,92 F - 15 1,251 0,947 64,21 F 4 15 1,317 1,013 65,49 F - 15 1,385 1,081 66,31 F - 15 1,420 1,116 70,81 F 4 15 1,455 1,151 70,81 F 4 15 1,528 1,224 71,95 F - 15 1,602 1,298 74,56 F - 15 1,641 1,336 76,63 F - 15 1,679 1,375 78,82 F - 15 1,718 1,414 80,79 F - 15 1,758 1,454 83,58 F - 15 1,798 1,494 89,06 F - 15 1,839 1,535 89,06 F - 15 2,105 1,618 89,06 F - 15 2,191 1,704 91,89 F - 15 2,460 1,973 104,10 F - 15 2,650 2,164 105,83 F - 15 2,952 2,465 135,77 F - 15 3,057 2,570 135,77 F - 15 3,164 2,677 135,77 F - 15 3,441 2,955 147,57 F - 15 3,732 3,245 171,72 F - 15 4,036 3,550 171,72 F - 15 4,354 3,867 214,66 F - On request Part number YG1.5-34 YG1.5-35 YG1.5-36 YG1.5-37 YG1.5-38 YG1.5-39 YG1.5-40 YG1.5-41 YG1.5-42 YG1.5-43 YG1.5-44 YG1.5-45 YG1.5-46 YG1.5-47 YG1.5-48 YG1.5-49 YG1.5-50 YG1.5-51 YG1.5-52 YG1.5-53 YG1.5-54 YG1.5-55 YG1.5-56 YG1.5-57 YG1.5-58 YG1.5-59 YG1.5-60 YG1.5-62 YG1.5-64 YG1.5-65 YG1.5-66 YG1.5-68 YG1.5-70 YG1.5-71 YG1.5-72 YG1.5-73 YG1.5-74 YG1.5-75 YG1.5-76 YG1.5-78 YG1.5-80 YG1.5-86 YG1.5-90 YG1.5-96 YG1.5-98 YG1.5-100 YG1.5-105 YG1.5-110 YG1.5-115 YG1.5-120 Gears available up to this size *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 253 Plastic spur gear Machined Delrin Module 1.5 - - - - ZG ZPG (optional) ØM Machined parts Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 2.4 Nm ØP 12 8 20 ØD 12 24/48 hours in STOCK* otherwise contact us discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PCD Outside ØP ØD 15,00 18,00 16,50 19,50 18,00 21,00 18,00 21,00 19,50 22,50 21,00 24,00 22,50 25,50 24,00 27,00 25,50 28,50 27,00 30,00 28,50 31,50 30,00 33,00 31,50 34,50 33,00 36,00 34,50 37,50 36,00 39,00 37,50 40,50 39,00 42,00 40,50 43,50 42,00 45,00 43,50 46,50 45,00 48,00 46,50 49,50 48,00 51,00 Boss ØM 18 18 18 18 18 20 20 20 20 24 25 25 25 25 25 25 25 25 25 25 25 25 28 28 *Depending on availability - Dimensions in mm 254 4 Volume  4 2013 HPC Weight (kg) Bore ØA Stock* ZG ZPG 6 0,005 0,002 4 6 0,005 0,003 4 6 0,006 0,003 - 6 0,006 0,003 4 6 0,006 0,004 - 8 0,007 0,005 - 8 0,008 0,005 4 8 0,009 0,006 4 8 0,010 0,007 - 8 0,012 0,008 4 8 0,014 0,009 - 8 0,015 0,010 4 8 0,016 0,011 - 8 0,017 0,012 - 8 0,018 0,014 - 8 0,019 0,015 4 8 0,021 0,016 4 8 0,022 0,017 - 8 0,024 0,019 - 8 0,025 0,020 4 8 0,027 0,022 - 8 0,028 0,024 4 10 0,031 0,025 - 10 0,032 0,026 - Price each 1 to 5 ZG ZPG 9,88 F 9,88 F 9,88 F 9,88 F 10,37 F 10,59 F 10,73 F 11,08 F 11,43 F 11,68 F 12,76 F 13,42 F 13,49 F 13,65 F 13,93 F 14,02 F 14,83 F 15,48 F 18,15 F 18,66 F 19,06 F 19,58 F 19,93 F 20,29 F On request Part number ZG1.5-9 ZG1.5-10 ZG1.5-11 ZG1.5-12 ZG1.5-13 ZG1.5-14 ZG1.5-15 ZG1.5-16 ZG1.5-17 ZG1.5-18 ZG1.5-19 ZG1.5-20 ZG1.5-21 ZG1.5-22 ZG1.5-23 ZG1.5-24 ZG1.5-25 ZG1.5-26 ZG1.5-27 ZG1.5-28 ZG1.5-29 ZG1.5-30 ZG1.5-31 ZG1.5-32 www.hpceurope.com - +33(0)4 37 496 496 ZG1.5-298 PCD ØP 49,50 51,00 52,50 54,00 55,50 57,00 58,50 60,00 61,50 63,00 64,50 66,00 67,50 69,00 70,50 72,00 73,50 75,00 76,50 78,00 79,50 81,00 82,50 84,00 85,50 87,00 88,50 90,00 93,00 96,00 97,50 99,00 102,00 105,00 106,50 108,00 109,50 111,00 112,50 114,00 117,00 120,00 129,00 135,00 144,00 150,00 Outside Boss ØD ØM 52,50 28 54,00 28 55,50 28 57,00 28 58,50 28 60,00 28 61,50 28 63,00 30 64,50 30 66,00 30 67,50 30 69,00 30 70,50 30 72,00 30 73,50 30 75,00 30 76,50 30 78,00 30 79,50 36 81,00 36 82,50 36 84,00 36 85,50 36 87,00 36 88,50 36 90,00 36 91,50 36 93,00 36 96,00 36 99,00 36 100,50 36 102,00 48 105,00 48 108,00 48 109,50 48 111,00 48 112,50 48 114,00 48 115,50 48 117,00 48 120,00 48 123,00 48 132,00 48 138,00 48 147,00 48 153,00 48 Bore ØA 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 Weight (kg) ZG ZPG 0,034 0,028 4 0,036 0,030 4 0,038 0,032 4 0,040 0,034 4 0,042 0,036 - 0,044 0,038 - 0,046 0,040 - 0,048 0,041 4 0,050 0,044 - 0,052 0,046 - 0,055 0,048 - 0,057 0,051 - 0,060 0,053 - 0,062 0,055 - 0,065 0,058 - 0,067 0,060 - 0,070 0,063 - 0,073 0,066 4 0,078 0,068 4 0,081 0,071 - 0,084 0,074 - 0,087 0,077 4 0,090 0,080 - 0,093 0,083 - 0,096 0,086 - 0,099 0,089 - 0,102 0,092 - 0,106 0,095 4 0,112 0,102 4 0,119 0,109 - 0,123 0,112 - 0,134 0,116 - 0,142 0,123 - 0,149 0,131 4 0,153 0,134 - 0,157 0,138 4 0,161 0,142 - 0,165 0,146 - 0,169 0,150 - 0,173 0,154 - 0,182 0,163 - 0,190 0,171 4 0,217 0,198 - 0,237 0,217 4 0,267 0,247 - 0,288 0,268 - Gears available up to this size 298 447,00 450,00 Dimensions: contact us *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 20,42 F 24,82 F 25,02 F 26,29 F 26,93 F 31,19 F 31,82 F 32,53 F 32,59 F 32,68 F 32,75 F 32,96 F 33,18 F 33,82 F 34,81 F 35,50 F 39,29 F 42,06 F 43,28 F 44,18 F 44,83 F 45,22 F 45,62 F 45,93 F 46,13 F 46,32 F 51,72 F 52,00 F 52,99 F 53,61 F 60,47 F 62,67 F 64,10 F 66,44 F 68,23 F 62,29 F 63,80 F 66,07 F 74,89 F 78,83 F 78,87 F 79,22 F 95,93 F 91,27 F 118,74 F 121,66 F On request Teeth Part number Z ZG1.5-33 33 ZG1.5-34 34 ZG1.5-35 35 ZG1.5-36 36 ZG1.5-37 37 ZG1.5-38 38 ZG1.5-39 39 ZG1.5-40 40 ZG1.5-41 41 ZG1.5-42 42 ZG1.5-43 43 ZG1.5-44 44 ZG1.5-45 45 ZG1.5-46 46 ZG1.5-47 47 ZG1.5-48 48 ZG1.5-49 49 ZG1.5-50 50 ZG1.5-51 51 ZG1.5-52 52 ZG1.5-53 53 ZG1.5-54 54 ZG1.5-55 55 ZG1.5-56 56 ZG1.5-57 57 ZG1.5-58 58 ZG1.5-59 59 ZG1.5-60 60 ZG1.5-62 62 ZG1.5-64 64 ZG1.5-65 65 ZG1.5-66 66 ZG1.5-68 68 ZG1.5-70 70 ZG1.5-71 71 ZG1.5-72 72 ZG1.5-73 73 ZG1.5-74 74 ZG1.5-75 75 ZG1.5-76 76 ZG1.5-78 78 ZG1.5-80 80 ZG1.5-86 86 ZG1.5-90 90 ZG1.5-96 96 ZG1.5-100 100 On request Volume 4 2013 4 255 Moulded plastic spur gear Nylon 6 moulded Module 1.5 e-bored ØA: Pr ust be hole m shed fini CLG - M  oulded parts ØD - Pressure angle 20° - Material: Nylon 6 Reinforced with 30% glass fibres .Options. ØA - A  lternative number of teeth, a datasheet is available from www.hpceurope.com in PDF format -  HPC are unable to modify these parts. For parts that can be modified to order, please see the ZG and ZPG ranges. Part number CLG1.5-12 CLG1.5-15 CLG1.5-16 CLG1.5-18 CLG1.5-20 CLG1.5-24 CLG1.5-25 CLG1.5-28 CLG1.5-30 CLG1.5-32 CLG1.5-36 CLG1.5-38 CLG1.5-40 CLG1.5-42 CLG1.5-45 CLG1.5-50 CLG1.5-54 CLG1.5-55 CLG1.5-60 CLG1.5-65 CLG1.5-70 CLG1.5-75 Number of teeth 12 15 16 18 20 24 25 28 30 32 36 38 40 42 45 50 54 55 60 65 70 75 y range Econom ØM ØP 17 DISCOUNTS 30 Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request Outside ØD 21,0 25,5 27,0 30,0 33,0 39,0 40,0 45,0 48,0 51,0 57,0 60,0 63,0 66,0 70,5 78,0 84,0 85,5 93,0 100,0 108,0 PCD ØP 18,0 22,5 24,0 27,0 30,0 36,0 37,5 42,0 45,0 48,0 54,0 57,0 60,0 63,0 67,5 75,0 81,0 82,5 90,0 97,5 105,0 Hub ØM 14 18 18 18 25 28 30 30 35 35 35 35 40 45 45 45 50 50 60 60 60 Bore ØA 5 5 5 5 8 8 8 8 12 12 16 16 16 16 16 16 20 20 20 20 20 115,5 112,5 60 20 Gears available up to this size *Depending on availability - Dimensions in mm 256 4 Volume  4 2013 HPC 4 4 - - 4 4 - - 4 - 4 - 4 - - 4 - - 4 - 4 Price each 1 to 9 3,65 F 3,65 F on request on request 4,23 F 4,59 F 4,59 F on request 5,69 F on request 8,28 F on request 8,28 F on request on request 10,34 F on request on request 13,48 F on request 19,23 F - On request Stock* www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 303 MODULE 1.5 SSG - Quality standard 9 - Pressure angle 20° Nm kW ØM Torque and power indication For 50 teeth at 1000 rpm StS 303 brass fibre 8,88 0,93 4,44 0,46 3,55 0,37 ØA H8 ØP s steel stainles ØD 10 13 23 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Teeth PCD Outside Boss Bore Part number Z ØP ØD ØM ØA SSG1.5-12-303 12 18,0 21,0 14 8 SSG1.5-15-303 15 22,5 25,5 18 8 SSG1.5-16-303 16 24,0 27,0 20 10 SSG1.5-18-303 18 27,0 30,0 20 10 SSG1.5-20-303 20 30,0 33,0 20 10 SSG1.5-22-303 22 33,0 36,0 20 10 SSG1.5-24-303 24 36,0 39,0 25 10 SSG1.5-30-303 30 45,0 48,0 25 10 SSG1.5-32-303 32 48,0 51,0 25 10 SSG1.5-36-303 36 54,0 57,0 30 15 SSG1.5-40-303 40 60,0 63,0 40 15 SSG1.5-44-303 44 66,0 69,0 40 15 SSG1.5-46-303 46 69,0 72,0 40 15 SSG1.5-48-303 48 72,0 75,0 40 15 SSG1.5-50-303 50 75,0 78,0 40 15 SSG1.5-54-303 54 81,0 84,0 40 15 SSG1.5-56-303 56 84,0 87,0 40 15 SSG1.5-60-303 60 90,0 93,0 40 15 SSG1.5-64-303 64 96,0 99,0 40 15 SSG1.5-66-303 66 99,0 102,0 40 15 SSG1.5-70-303 70 105,0 108,0 40 15 SSG1.5-298-303 298 Gears available up to this size 447,0 450,0 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com Stock* - - - - - - - - - - - - - - - - - - - - - Dimensions: contact us HPC Price each 1 to 5 20,08 F 22,17 F 23,11 F 25,99 F 27,61 F 30,52 F 31,93 F 40,48 F 43,46 F 49,96 F 53,04 F 53,18 F 55,46 F 58,01 F 80,34 F 80,34 F 80,34 F 110,42 F 110,42 F 126,65 F 126,65 F On request Volume 4 2013 4 257 Stainless steel spur gear Stainless steel 304L MODULE 1.5 SSG - Quality standard 9 - Pressure angle 20° Nm kW ØM Torque and power indication For 50 teeth at 1000 rpm StS 304L brass fibre 8,88 0,93 4,44 0,46 ØA H8 3,55 0,37 ØP s steel stainles ØD 12 13 25 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part number Teeth PCD Outside Boss Bore Z ØP ØD ØM ØA SSG1.5-12-304L SSG1.5-15-304L SSG1.5-16-304L SSG1.5-18-304L SSG1.5-20-304L SSG1.5-22-304L SSG1.5-24-304L SSG1.5-30-304L SSG1.5-32-304L SSG1.5-36-304L SSG1.5-40-304L SSG1.5-44-304L SSG1.5-46-304L SSG1.5-48-304L SSG1.5-50-304L SSG1.5-54-304L SSG1.5-56-304L SSG1.5-60-304L SSG1.5-64-304L SSG1.5-66-304L SSG1.5-70-304L 12 15 16 18 20 22 24 30 32 36 40 44 46 48 50 54 56 60 64 66 70 SSG1.5-298-304L 298 18 22,5 24 27 30 33 36 45 48 54 60 66 69 72 75 81 84 90 96 99 105 21 25,5 27 30 33 36 39 48 51 57 63 69 72 75 78 84 87 93 99 102 108 14 18 20 20 20 20 25 25 25 30 40 40 40 40 40 40 40 40 40 40 40 8 8 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 447 450 Dimensions: contact us Gears available up to this size *Depending on availability - Dimensions in mm 258 4 Volume  4 2013 HPC Price each 1 to 5 25,19 F 27,68 F 28,87 F 32,50 F 34,53 F 38,20 F 39,98 F 50,49 F 54,25 F 62,35 F 66,23 F 66,37 F 69,25 F 72,35 F 100,42 F 100,42 F 100,42 F 138,02 F 138,02 F 158,32 F 158,32 F On request www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 316L MODULE 1.5 SSG - Quality standard 9 - Pressure angle 20° Nm kW Torque and power indication For 50 teeth at 1000 rpm StS 316L brass fibre ØM ØA H8 ØP s steel ØD 14 13 stainles 27 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Teeth PCD Outside Part Z ØP ØD number SSG1.5-12-316L 12 18,0 21,0 SSG1.5-15-316L 15 22,5 25,5 SSG1.5-16-316L 16 24,0 27,0 SSG1.5-18-316L 18 27,0 30,0 SSG1.5-20-316L 20 30,0 33,0 SSG1.5-22-316L 22 33,0 36,0 SSG1.5-24-316L 24 36,0 39,0 SSG1.5-30-316L 30 45,0 48,0 SSG1.5-32-316L 32 48,0 51,0 SSG1.5-36-316L 36 54,0 57,0 SSG1.5-40-316L 40 60,0 63,0 SSG1.5-44-316L 44 66,0 69,0 SSG1.5-46-316L 46 69,0 72,0 SSG1.5-48-316L 48 72,0 75,0 SSG1.5-50-316L 50 75,0 78,0 SSG1.5-54-316L 54 81,0 84,0 SSG1.5-56-316L 56 84,0 87,0 SSG1.5-60-316L 60 90,0 93,0 SSG1.5-64-316L 64 96,0 99,0 SSG1.5-66-316L 66 99,0 102,0 SSG1.5-70-316L 70 105,0 108,0 Boss Bore ØM ØA 14 8 18 8 20 10 20 10 20 10 20 10 25 10 25 10 25 10 30 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 40 15 SSG1.5-298-316L Dimensions: contact us 298 Gears available up to this size 447,0 450,0 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 37,65 F 41,58 F 43,33 F 48,74 F 51,78 F 57,25 F 59,88 F 75,90 F 81,48 F 93,69 F 99,47 F 99,72 F 104,00 F 108,79 F 150,65 F 150,65 F 150,65 F 207,03 F 207,03 F 237,49 F 237,49 F On request Volume 4 2013 4 259 Steel spur gear Module 1.75 Steel 34C10 G PG (optional) ØM - P  recision class 9 - Pressure angle 20° - Linear speed 300m/min Nm kW ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 16 1.72 75 7.83 8 0.86 6.40 0.67 ØP 18 12 ØD 18 30 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PCD ØP 17,50 19,25 21,00 21,00 22,75 24,50 26,25 28,00 29,75 31,50 33,25 35,00 36,75 38,50 40,25 42,00 43,75 45,50 47,25 49,00 50,75 52,50 54,25 56,00 57,75 260 4 Volume  4 2013 Outside ØD 21,00 22,75 24,50 24,50 26,25 28,00 29,75 31,50 33,25 35,00 36,75 38,50 40,25 42,00 43,75 45,50 47,25 49,00 50,75 52,50 54,25 56,00 57,75 59,50 61,25 Boss ØM 21,00 22,75 24,50 24,50 25,00 25,00 25,00 25,00 25,00 25,00 25,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 40,00 40,00 40,00 40,00 40,00 40,00 HPC Bore ØA 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 Weight (kg) G PG 0,047 0,022 0,059 0,029 0,073 0,037 0,073 0,037 0,083 0,045 0,092 0,054 0,102 0,064 0,104 0,069 0,115 0,080 0,126 0,092 0,139 0,104 0,171 0,117 0,185 0,131 0,199 0,145 0,214 0,160 0,230 0,175 0,246 0,191 0,263 0,208 0,280 0,226 0,335 0,235 0,353 0,254 0,373 0,274 0,393 0,294 0,414 0,315 0,436 0,336 Price each 1 to 5 G PG 20,68 F 20,68 F 20,68 F 20,68 F 21,22 F 22,38 F 23,39 F 23,81 F 24,45 F 25,50 F 26,53 F 28,32 F 28,98 F 29,43 F 30,95 F 32,32 F 32,54 F 32,76 F 33,33 F 33,42 F 33,80 F 34,74 F 35,50 F 35,83 F 36,02 F On request Part number G1.75-9 G1.75-10 G1.75-11 G1.75-12 G1.75-13 G1.75-14 G1.75-15 G1.75-16 G1.75-17 G1.75-18 G1.75-19 G1.75-20 G1.75-21 G1.75-22 G1.75-23 G1.75-24 G1.75-25 G1.75-26 G1.75-27 G1.75-28 G1.75-29 G1.75-30 G1.75-31 G1.75-32 G1.75-33 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 G1.75-335 335 PCD Outside ØP ØD 59,50 63,00 61,25 64,75 63,00 66,50 64,75 68,25 66,50 70,00 68,25 71,75 70,00 73,50 71,75 75,25 73,50 77,00 75,25 78,75 77,00 80,50 78,75 82,25 80,50 84,00 82,25 85,75 84,00 87,50 85,75 89,25 87,50 91,00 89,25 92,75 91,00 94,50 92,75 96,25 94,50 98,00 96,25 99,75 98,00 101,50 99,75 103,25 101,50 105,00 103,25 106,75 105,00 108,50 108,50 112,00 112,00 115,50 113,75 117,25 115,50 119,00 119,00 122,50 122,50 126,00 124,25 127,75 126,00 129,50 127,75 131,25 129,50 133,00 131,25 134,75 133,00 136,50 136,50 140,00 140,00 143,50 150,50 154,00 157,50 161,00 168,00 171,50 171,50 175,00 175,00 178,50 183,75 187,25 192,50 196,00 201,25 204,75 210,00 213,50 Boss ØM 40,00 40,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 Bore ØA 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) G PG 0,458 0,359 0,481 0,382 0,569 0,405 0,593 0,429 0,618 0,454 0,644 0,480 0,670 0,506 0,697 0,533 0,724 0,560 0,752 0,588 0,781 0,617 0,858 0,628 0,889 0,658 0,919 0,689 0,951 0,720 0,983 0,752 1,016 0,785 1,049 0,818 1,083 0,853 1,118 0,887 1,356 0,923 1,392 0,959 1,428 0,996 1,466 1,033 1,504 1,071 1,543 1,110 1,582 1,149 1,663 0,230 1,746 1,314 1,789 1,356 1,833 1,400 1,921 1,489 2,272 1,580 2,319 1,627 2,367 1,674 2,415 1,722 2,463 1,771 2,513 1,820 2,563 1,870 2,665 1,972 2,769 2,077 3,099 2,407 3,333 2,640 3,702 3,010 3,831 3,139 3,962 3,270 4,302 3,609 4,658 3,965 5,031 4,338 5,420 4,727 Gears available up to this size 586,25 589,75 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 36,61 F 36,68 F 37,92 F 39,64 F 40,54 F 41,71 F 42,62 F 43,23 F 44,18 F 45,85 F 46,48 F 47,14 F 48,07 F 48,94 F 50,22 F 52,11 F 52,70 F 54,02 F 55,36 F 56,78 F 61,29 F 63,10 F 65,80 F 67,92 F 70,01 F 72,26 F 75,18 F 77,03 F 79,29 F 81,77 F 84,29 F 86,75 F 89,13 F 90,38 F 92,07 F 93,42 F 94,83 F 96,23 F 97,63 F 105,24 F 111,44 F 125,32 F 137,19 F 151,79 F 157,92 F 164,87 F On request On request On request On request On request Part number G1.75-34 G1.75-35 G1.75-36 G1.75-37 G1.75-38 G1.75-39 G1.75-40 G1.75-41 G1.75-42 G1.75-43 G1.75-44 G1.75-45 G1.75-46 G1.75-47 G1.75-48 G1.75-49 G1.75-50 G1.75-51 G1.75-52 G1.75-53 G1.75-54 G1.75-55 G1.75-56 G1.75-57 G1.75-58 G1.75-59 G1.75-60 G1.75-62 G1.75-64 G1.75-65 G1.75-66 G1.75-68 G1.75-70 G1.75-71 G1.75-72 G1.75-73 G1.75-74 G1.75-75 G1.75-76 G1.75-78 G1.75-80 G1.75-86 G1.75-90 G1.75-96 G1.75-98 G1.75-100 G1.75-105 G1.75-110 G1.75-115 G1.75-120 On request Volume 4 2013 4 261 HEAVY DUTY spur gear Steel 35NCD6 Module 1.75 YG XG (optional) ØM  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened Nm 48 kW 4.998 Part number YG1.75-9 YG1.75-10 YG1.75-11 YG1.75-12 YG1.75-13 YG1.75-14 YG1.75-15 YG1.75-16 YG1.75-17 YG1.75-18 YG1.75-19 YG1.75-20 YG1.75-21 YG1.75-22 YG1.75-23 YG1.75-24 YG1.75-25 YG1.75-26 YG1.75-27 YG1.75-28 YG1.75-29 YG1.75-30 YG1.75-31 YG1.75-32 YG1.75-33 69 7.16 Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Dimensions in mm 48 4.99 PCD ØP 17,50 19,25 21,00 21,00 22,75 24,50 26,25 28,00 29,75 31,50 33,25 35,00 36,75 38,50 40,25 42,00 43,75 45,50 47,25 49,00 50,75 52,50 54,25 56,00 57,75 262 4 Volume  4 2013 25 15 ØD 40 132 13.8 Outside ØD 21,00 22,75 24,50 24,50 26,25 28,00 29,75 31,50 33,25 35,00 36,75 38,50 40,25 42,00 43,75 45,50 47,25 49,00 50,75 52,50 54,25 56,00 57,75 59,50 61,25 25 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Boss ØM 21,00 22,75 24,50 24,50 25,00 25,00 25,00 25,00 25,00 25,00 25,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 30,00 40,00 40,00 40,00 40,00 40,00 40,00 HPC Bore ØA 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 Weight (kg) YG XG 0,062 0,031 0,078 0,041 0,096 0,051 0,096 0,051 0,110 0,063 0,122 0,075 0,136 0,089 0,140 0,096 0,155 0,111 0,171 0,127 0,188 0,144 0,231 0,162 0,249 0,181 0,269 0,201 0,290 0,222 0,312 0,243 0,334 0,266 0,358 0,289 0,382 0,314 0,451 0,327 0,477 0,353 0,504 0,380 0,532 0,408 0,561 0,437 0,591 0,467 Price each 1 to 5 YG XG 25,94 F 25,94 F 25,94 F 25,94 F 26,60 F 28,07 F 29,27 F 29,78 F 30,63 F 31,97 F 33,23 F 35,52 F 36,32 F 36,88 F 38,74 F 40,48 F 40,75 F 40,98 F 41,71 F 41,86 F 42,23 F 43,42 F 44,30 F 44,82 F 45,07 F On request - - - - www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 YG1.75-335 335 Dimensions in mm PCD Outside ØP ØD 59,50 63,00 61,25 64,75 63,00 66,50 64,75 68,25 66,50 70,00 68,25 71,75 70,00 73,50 71,75 75,25 73,50 77,00 75,25 78,75 77,00 80,50 78,75 82,25 80,50 84,00 82,25 85,75 84,00 87,50 85,75 89,25 87,50 91,00 89,25 92,75 91,00 94,50 92,75 96,25 94,50 98,00 96,25 99,75 98,00 101,50 99,75 103,25 101,50 105,00 103,25 106,75 105,00 108,50 108,50 112,00 112,00 115,50 113,75 117,25 115,50 119,00 119,00 122,50 122,50 126,00 124,25 127,75 126,00 129,50 127,75 131,25 129,50 133,00 131,25 134,75 133,00 136,50 136,50 140,00 140,00 143,50 150,50 154,00 157,50 161,00 168,00 171,50 171,50 175,00 175,00 178,50 183,75 187,25 192,50 196,00 201,25 204,75 210,00 213,50 Boss ØM 40,00 40,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 50,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 60,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 80,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 Bore ØA 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) Price each 1 to 5 YG XG YG XG 0,622 0,498 45,85 F 0,654 0,530 45,94 F 0,768 0,563 47,41 F 0,801 0,596 49,55 F 0,836 0,631 50,71 F 0,871 0,666 52,15 F 0,908 0,702 53,28 F 0,945 0,740 54,09 F 0,983 0,778 55,34 F 1,022 0,817 57,37 F 1,062 0,857 58,15 F 1,160 0,872 58,99 F 1,202 0,914 60,09 F 1,245 0,956 61,20 F 1,289 1,000 62,85 F 1,333 1,045 65,13 F 1,379 1,090 65,91 F 1,425 1,137 67,59 F 1,473 0,184 69,25 F 1,521 1,232 71,02 F 1,823 1,282 76,60 F 1,873 1,332 78,98 F 1,924 1,383 82,34 F 1,976 1,435 84,95 F 2,029 1,488 87,58 F 2,083 1,542 90,38 F 2,137 1,596 94,02 F 2,250 1,709 96,30 F 2,366 1,825 99,93 F 2,425 1,884 102,32 F 2,485 1,944 105,33 F 2,608 2,068 108,49 F 3,060 2,195 111,37 F 3,125 2,259 112,99 F 3,191 2,325 115,11 F 3,257 2,392 116,83 F 3,325 2,460 118,62 F 3,394 2,528 120,30 F 3,463 2,598 122,09 F 3,605 2,739 131,55 F 3,750 2,885 152,33 F 4,209 3,343 192,67 F 4,532 3,667 171,51 F 5,046 4,181 190,23 F 5,225 4,359 197,48 F 5,407 4,541 206,10 F 5,878 5,013 206,10 F 6,373 5,508 On request 6,891 6,025 On request 7,431 6,566 On request On request Part number YG1.75-34 YG1.75-35 YG1.75-36 YG1.75-37 YG1.75-38 YG1.75-39 YG1.75-40 YG1.75-41 YG1.75-42 YG1.75-43 YG1.75-44 YG1.75-45 YG1.75-46 YG1.75-47 YG1.75-48 YG1.75-49 YG1.75-50 YG1.75-51 YG1.75-52 YG1.75-53 YG1.75-54 YG1.75-55 YG1.75-56 YG1.75-57 YG1.75-58 YG1.75-59 YG1.75-60 YG1.75-62 YG1.75-64 YG1.75-65 YG1.75-66 YG1.75-68 YG1.75-70 YG1.75-71 YG1.75-72 YG1.75-73 YG1.75-74 YG1.75-75 YG1.75-76 YG1.75-78 YG1.75-80 YG1.75-86 YG1.75-90 YG1.75-96 YG1.75-98 YG1.75-100 YG1.75-100 YG1.75-110 YG1.75-115 YG1.75-120 Gears available up to this size 586,25 589,75 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 263 Steel spur gear Module 2.0 Steel 34C10 G PG (optional) ØM - P  recision class 9 - P  ressure angle 20° - Linear speed 300m/min Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 24/48 hours 25 2.61 119 12.50 12.51 1.32 10 1.04 ØP 20 35 PCD ØP 20,00 22,00 24,00 24,00 26,00 28,00 30,00 32,00 34,00 36,00 38,00 40,00 42,00 44,00 46,00 48,00 50,00 52,00 54,00 56,00 58,00 60,00 62,00 64,00 66,00 20 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request otherwise contact us Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ØD DISCOUNTS in STOCK* Part number G2-9 G2-10 G2-11 G2-12 G2-13 G2-14 G2-15 G2-16 G2-17 G2-18 G2-19 G2-20 G2-21 G2-22 G2-23 G2-24 G2-25 G2-26 G2-27 G2-28 G2-29 G2-30 G2-31 G2-32 G2-33 15 Outside ØD 24,00 26,00 28,00 28,00 30,00 32,00 34,00 36,00 38,00 40,00 42,00 44,00 46,00 48,00 50,00 52,00 54,00 56,00 58,00 60,00 62,00 64,00 66,00 68,00 70,00 Boss ØM 24 26 28 28 20 20 25 25 25 30 30 30 30 35 35 35 35 35 40 40 40 40 40 40 40 *Depending on availability - Dimensions in mm 264 4 Volume  4 2013 HPC Weight (kg) Price each 1 to 5 Bore G PG G PG ØA Stock* 12 0,070 0,031 25,72 F 4 12 0,089 0,041 25,72 F 4 12 0,110 0,052 25,72 F - 12 0,110 0,052 13,28 F 4 12 0,087 0,064 27,21 F 4 12 0,100 0,077 28,75 F 4 15 0,117 0,081 15,64 F 4 15 0,132 0,096 16,44 F 4 15 0,148 0,112 32,45 F 4 15 0,190 0,129 17,24 F 4 15 0,207 0,147 34,18 F - 15 0,226 0,165 18,02 F 4 15 0,246 0,185 35,80 F - 15 0,296 0,206 37,13 F 4 15 0,317 0,227 37,13 F 4 15 0,340 0,250 19,63 F 4 15 0,364 0,273 40,08 F 4 15 0,388 0,298 41,34 F 4 20 0,411 0,302 42,81 F 4 20 0,437 0,329 43,73 F 4 20 0,464 0,356 44,82 F - 20 0,493 0,385 23,69 F 4 20 0,522 0,414 47,61 F 4 20 0,552 0,444 25,75 F 4 20 0,584 0,476 50,71 F - On request Nm kW ØA H8 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 PCD ØP 68,00 70,00 72,00 74,00 76,00 78,00 80,00 82,00 84,00 86,00 88,00 90,00 92,00 94,00 96,00 98,00 100,00 102,00 104,00 106,00 108,00 110,00 112,00 114,00 116,00 118,00 120,00 124,00 128,00 130,00 132,00 136,00 140,00 142,00 144,00 146,00 148,00 150,00 152,00 156,00 160,00 172,00 180,00 192,00 196,00 200,00 210,00 220,00 230,00 240,00 G2-290 290 580,00 584,00 Boss ØM 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 Bore ØA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) Price each 1 to 5 Stock* G PG G PG 4 4 4 - - 4 4 - - - 4 4 4 - 4 4 4 - - - 4 - - - - - 4 - - 4 - - 4 - - - - - - - 4 - 4 - - - - - - - 0,616 0,730 0,764 0,799 0,836 0,873 0,911 0,949 0,989 1,030 1,072 1,115 1,159 1,203 1,249 1,296 1,343 1,392 1,441 1,492 1,543 1,596 1,649 1,703 1,759 1,815 1,872 1,989 2,211 2,173 2,236 2,364 2,497 2,781 2,850 2,920 2,990 3,062 3,135 3,283 3,435 3,914 4,252 4,789 4,975 5,166 5,658 6,175 6,716 7,281 Gears available up to this size *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 0,508 0,541 0,575 0,610 0,646 0,683 0,721 0,760 0,800 0,841 0,883 0,926 0,969 1,014 1,060 1,106 1,154 1,202 1,252 1,302 1,354 1,406 1,460 1,514 1,569 1,626 1,683 1,800 1,921 1,983 2,046 2,175 2,308 2,376 2,444 2,514 2,585 2,656 2,729 2,877 3,029 3,508 3,846 4,383 4,570 4,760 5,253 5,770 6,311 6,875 53,20 F 54,90 F 30,03 F 58,72 F 60,29 F 61,72 F 62,85 F 64,02 F 64,75 F 65,54 F 66,57 F 67,59 F 69,13 F 70,68 F 72,77 F 75,05 F 77,91 F 79,42 F 80,79 F 81,72 F 83,10 F 91,25 F 93,18 F 95,04 F 96,70 F 97,84 F 99,19 F 101,63 F 104,09 F 109,04 F 110,89 F 112,54 F 115,37 F 121,78 F 129,18 F 134,40 F 138,18 F 142,81 F 149,77 F 157,54 F 172,83 F 185,95 F 206,36 F 220,93 F 240,46 F 256,60 F 266,13 F 284,34 F 304,12 F 330,45 F On request Outside ØD 72,00 74,00 76,00 78,00 80,00 82,00 84,00 86,00 88,00 90,00 92,00 94,00 96,00 98,00 100,00 102,00 104,00 106,00 108,00 110,00 112,00 114,00 116,00 118,00 120,00 122,00 124,00 128,00 132,00 134,00 136,00 140,00 144,00 146,00 148,00 150,00 152,00 154,00 156,00 160,00 164,00 176,00 184,00 196,00 200,00 204,00 214,00 224,00 234,00 244,00 Part number G2-34 G2-35 G2-36 G2-37 G2-38 G2-39 G2-40 G2-41 G2-42 G2-43 G2-44 G2-45 G2-46 G2-47 G2-48 G2-49 G2-50 G2-51 G2-52 G2-53 G2-54 G2-55 G2-56 G2-57 G2-58 G2-59 G2-60 G2-62 G2-64 G2-65 G2-66 G2-68 G2-70 G2-71 G2-72 G2-73 G2-74 G2-75 G2-76 G2-78 G2-80 G2-86 G2-90 G2-96 G2-98 G2-100 G2-105 G2-110 G2-115 G2-120 On request Volume 4 2013 4 265 HEAVY DUTY spur gear Steel 35NCD6 Module 2.0 24/48 hours YG XG (optional) in STOCK* otherwise contact us ØM  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Nm kW Torque and power indication For 50 teeth at 1000 rpm 35NCD6 35NCD6 20NCD2 hardened 20NCD2 hardened 70 7.43 Part number YG2-9 YG2-10 YG2-11 YG2-12 YG2-13 YG2-14 YG2-15 YG2-16 YG2-17 YG2-18 YG2-19 YG2-20 YG2-21 YG2-22 YG2-23 YG2-24 YG2-25 YG2-26 YG2-27 YG2-28 YG2-29 YG2-30 YG2-31 YG2-32 YG2-33 103 10.85 Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 70 7.43 40 25 ØD 195 20.14 PCD Outside ØP ØD 20,00 24,00 22,00 26,00 24,00 28,00 24,00 28,00 26,00 30,00 28,00 32,00 30,00 34,00 32,00 36,00 34,00 38,00 36,00 40,00 38,00 42,00 40,00 44,00 42,00 46,00 44,00 48,00 46,00 50,00 48,00 52,00 50,00 54,00 52,00 56,00 54,00 58,00 56,00 60,00 58,00 62,00 60,00 64,00 62,00 66,00 64,00 68,00 66,00 70,00 Boss ØM 24 26 28 28 30 30 30 30 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 *Depending on availability - Dimensions in mm 266 4 Volume  4 2013 15 25 HPC DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Bore ØA 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 Price each 1 to 5 Weight (kg) XG YG XG YG 0,077 0,038 32,03 F 0,099 0,051 32,03 F 0,123 0,065 32,03 F 0,123 0,065 32,03 F 0,148 0,080 33,92 F 0,164 0,096 35,87 F 0,162 0,101 37,74 F 0,181 0,120 39,57 F 0,230 0,140 40,48 F 0,251 0,161 41,55 F 0,273 0,183 42,62 F 0,297 0,207 43,50 F 0,321 0,231 44,67 F 0,347 0,257 45,45 F 0,374 0,284 46,26 F 0,403 0,312 47,27 F 0,432 0,342 50,02 F 0,463 0,372 51,54 F 0,567 0,378 53,32 F 0,600 0,411 54,49 F 0,635 0,445 55,92 F 0,670 0,481 57,10 F 0,707 0,517 59,35 F 0,745 0,555 62,02 F 0,784 0,594 63,28 F Stock* - - - 4 - - 4 - - 4 - 4 4 - 4 4 4 - - - - 4 - - - On request - - - - www.hpceurope.com - +33(0)4 37 496 496 YG2-290 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 120 290 PCD ØP 68,00 70,00 72,00 74,00 76,00 78,00 80,00 82,00 84,00 86,00 88,00 90,00 92,00 94,00 96,00 98,00 100,00 102,00 104,00 106,00 108,00 110,00 112,00 114,00 116,00 118,00 120,00 124,00 128,00 130,00 132,00 136,00 140,00 142,00 144,00 146,00 148,00 150,00 152,00 156,00 160,00 172,00 180,00 192,00 196,00 200,00 210,00 220,00 230,00 240,00 Outside Boss ØD ØM 72,00 50 74,00 50 76,00 50 78,00 50 80,00 50 82,00 50 84,00 50 86,00 50 88,00 50 90,00 60 92,00 60 94,00 60 96,00 60 98,00 60 100,00 60 102,00 60 104,00 60 106,00 60 108,00 60 110,00 60 112,00 60 114,00 60 116,00 60 118,00 60 120,00 60 122,00 60 124,00 60 128,00 75 132,00 75 134,00 75 136,00 75 140,00 75 144,00 75 146,00 75 148,00 75 150,00 75 152,00 75 154,00 75 156,00 75 160,00 100 164,00 100 176,00 100 184,00 100 196,00 100 200,00 100 204,00 100 214,00 100 224,00 100 234,00 100 244,00 100 Weight (kg) Price each 1 to 5 Bore Stock* YG XG YG XG ØA 20 0,824 0,635 66,31 F - 20 0,865 0,676 68,45 F 4 20 0,908 0,719 72,36 F - 20 0,952 0,763 73,27 F - 20 0,997 0,808 75,13 F - 20 1,043 0,854 76,93 F - 20 1,091 0,902 78,32 F 4 20 1,139 0,950 79,74 F - 20 1,189 1,000 80,71 F - 20 1,340 1,051 81,70 F - 20 1,392 1,103 83,03 F - 20 1,445 1,157 84,26 F 4 20 1,500 1,212 86,20 F - 20 1,556 1,268 88,15 F - 20 1,613 1,325 90,67 F 4 20 1,671 1,383 93,55 F - 20 1,731 1,442 97,06 F 4 20 1,792 1,503 99,03 F - 20 1,853 1,565 100,72 F - 20 1,917 1,628 101,91 F - 20 1,981 1,692 103,57 F - 20 2,046 1,758 113,67 F 4 20 2,113 1,825 116,10 F - 20 2,181 1,893 118,43 F - 20 2,250 1,962 120,59 F - 20 2,320 2,032 121,93 F - 20 2,392 2,104 123,77 F 4 20 2,721 2,250 126,66 F - 20 2,873 2,402 129,77 F - 20 2,950 2,479 135,89 F - 20 3,029 2,558 138,18 F - 20 3,190 2,719 140,33 F - 20 3,356 2,885 152,33 F - 20 3,441 2,970 152,33 F - 20 3,527 3,055 160,99 F - 20 3,614 3,143 167,43 F - 20 3,702 3,231 172,20 F - 20 3,792 3,321 177,92 F - 20 3,882 3,411 186,66 F - 20 4,462 3,596 196,37 F - 20 4,652 3,786 215,45 F - 20 5,250 4,385 231,79 F - 20 5,673 4,808 257,19 F - 20 6,344 5,479 275,33 F - 20 6,577 5,712 275,33 F - 20 6,815 5,950 319,74 F - 20 7,431 6,566 331,59 F - 20 8,077 7,212 354,33 F - 20 8,754 7,888 378,94 F - 20 9,460 8,594 411,81 F - On request Part number YG2-34 YG2-35 YG2-36 YG2-37 YG2-38 YG2-39 YG2-40 YG2-41 YG2-42 YG2-43 YG2-44 YG2-45 YG2-46 YG2-47 YG2-48 YG2-49 YG2-50 YG2-51 YG2-52 YG2-53 YG2-54 YG2-55 YG2-56 YG2-57 YG2-58 YG2-59 YG2-60 YG2-62 YG2-64 YG2-65 YG2-66 YG2-68 YG2-70 YG2-71 YG2-72 YG2-73 YG2-74 YG2-75 YG2-76 YG2-78 YG2-80 YG2-86 YG2-90 YG2-96 YG2-98 YG2-100 YG2-105 YG2-110 YG2-115 YG2-120 Gears available up to this size 580,00 584,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Volume 4 2013 4 267 Plastic spur gear Machined Delrin Module 2.0 - - - - ZG ZPG (optional) ØM  achined parts M Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 6 Nm ØP 15 10 25 24/48 hours 15 ØD in STOCK* otherwise contact us discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PCD ØP 20,00 22,00 24,00 24,00 26,00 28,00 30,00 32,00 34,00 36,00 38,00 40,00 42,00 44,00 46,00 48,00 50,00 52,00 54,00 56,00 58,00 60,00 62,00 64,00 66,00 Outside ØD 24,00 26,00 28,00 28,00 30,00 32,00 34,00 36,00 38,00 40,00 42,00 44,00 46,00 48,00 50,00 52,00 54,00 56,00 58,00 60,00 62,00 64,00 66,00 68,00 70,00 Boss ØM 24 24 24 24 24 24 25 27 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 *Depending on availability - Dimensions in mm 268 4 Volume  4 2013 HPC Bore ØA 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Price each 1 to 5 Weight (kg) Stock* ZPG ZG ZPG ZG 4 - - 4 - 4 4 4 - 4 4 4 4 4 - 4 4 - 4 - - 4 - - 4 0,009 0,011 0,012 0,012 0,014 0,015 0,016 0,019 0,023 0,025 0,027 0,030 0,032 0,038 0,041 0,044 0,047 0,050 0,053 0,056 0,060 0,063 0,067 0,071 0,075 0,005 0,006 0,007 0,007 0,009 0,010 0,011 0,013 0,015 0,017 0,020 0,022 0,025 0,027 0,030 0,033 0,036 0,039 0,042 0,045 0,049 0,052 0,056 0,060 0,064 12,91 F 12,91 F 12,91 F 12,91 F 13,64 F 14,40 F 15,21 F 16,36 F 16,90 F 17,66 F 18,29 F 18,81 F 22,51 F 22,90 F 23,39 F 23,87 F 30,29 F 31,22 F 32,38 F 33,07 F 33,89 F 39,27 F 40,78 F 42,70 F 43,48 F On request Part number ZG2-9 ZG2-10 ZG2-11 ZG2-12 ZG2-13 ZG2-14 ZG2-15 ZG2-16 ZG2-17 ZG2-18 ZG2-19 ZG2-20 ZG2-21 ZG2-22 ZG2-23 ZG2-24 ZG2-25 ZG2-26 ZG2-27 ZG2-28 ZG2-29 ZG2-30 ZG2-31 ZG2-32 ZG2-33 www.hpceurope.com - +33(0)4 37 496 496 ZG2-290 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 290 PCD ØP 68,00 70,00 72,00 74,00 76,00 78,00 80,00 82,00 84,00 86,00 88,00 90,00 92,00 94,00 96,00 98,00 100,00 102,00 104,00 106,00 108,00 110,00 112,00 114,00 116,00 118,00 120,00 124,00 128,00 130,00 132,00 136,00 140,00 142,00 144,00 146,00 148,00 150,00 152,00 156,00 160,00 172,00 180,00 192,00 Outside Boss ØD ØM 72,00 35 74,00 35 76,00 45 78,00 45 80,00 45 82,00 45 84,00 45 86,00 45 88,00 45 90,00 45 92,00 45 94,00 45 96,00 45 98,00 45 100,00 45 102,00 45 104,00 45 106,00 45 108,00 45 110,00 45 112,00 45 114,00 45 116,00 45 118,00 45 120,00 45 122,00 60 124,00 60 128,00 60 132,00 60 134,00 60 136,00 60 140,00 60 144,00 60 146,00 60 148,00 60 150,00 60 152,00 60 154,00 60 156,00 60 160,00 60 164,00 60 176,00 60 184,00 60 196,00 60 Bore ØA 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Price each 1 to 5 Weight (kg) Stock* ZG ZPG ZPG ZG 4 4 4 - 4 4 4 - - - - 4 - - 4 - 4 - - - 4 - - 4 - - 4 - - - 4 - 4 - 4 - - 4 - - - - - - 0,079 0,083 0,093 0,098 0,102 0,107 0,112 0,117 0,122 0,127 0,132 0,137 0,143 0,149 0,154 0,160 0,166 0,172 0,179 0,185 0,191 0,198 0,205 0,212 0,219 0,242 0,249 0,264 0,279 0,287 0,295 0,311 0,328 0,336 0,345 0,354 0,363 0,372 0,381 0,399 0,419 0,479 0,522 0,589 Gears available up to this size 580,00 584,00 *Depending on availability - Dimensions in mm Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 0,068 0,072 0,075 0,080 0,084 0,089 0,094 0,098 0,103 0,109 0,114 0,119 0,125 0,130 0,136 0,142 0,148 0,154 0,160 0,167 0,173 0,180 0,187 0,193 0,200 0,208 0,215 0,230 0,245 0,253 0,261 0,277 0,294 0,302 0,311 0,320 0,328 0,337 0,347 0,365 0,384 0,445 0,487 0,555 45,62 F 47,07 F 49,72 F 53,39 F 54,73 F 55,96 F 57,04 F 58,15 F 58,77 F 59,52 F 67,14 F 68,23 F 69,69 F 71,41 F 71,66 F 73,92 F 76,81 F 78,35 F 79,64 F 80,53 F 81,89 F 84,92 F 91,89 F 93,64 F 104,15 F 104,51 F 104,51 F 104,51 F 111,92 F 117,23 F 119,27 F 124,12 F 134,45 F 142,01 F 150,64 F 152,86 F 152,86 F 152,86 F 174,60 F 185,53 F 185,53 F 215,59 F 267,87 F 267,87 F On request Part number ZG2-34 ZG2-35 ZG2-36 ZG2-37 ZG2-38 ZG2-39 ZG2-40 ZG2-41 ZG2-42 ZG2-43 ZG2-44 ZG2-45 ZG2-46 ZG2-47 ZG2-48 ZG2-49 ZG2-50 ZG2-51 ZG2-52 ZG2-53 ZG2-54 ZG2-55 ZG2-56 ZG2-57 ZG2-58 ZG2-59 ZG2-60 ZG2-62 ZG2-64 ZG2-65 ZG2-66 ZG2-68 ZG2-70 ZG2-71 ZG2-72 ZG2-73 ZG2-74 ZG2-75 ZG2-76 ZG2-78 ZG2-80 ZG2-86 ZG2-90 ZG2-96 On request Volume 4 2013 4 269 Moulded plastic spur gear Nylon 6 moulded Module 2.0 y range Econom CLG - M  oulded parts - Pressure angle 20° - Material: Nylon 6 Reinforced with 30% glass fibres .Options. ØD ØM ØP ØA - A  lternative number of teeth, a datasheet is available from www.hpceurope.com in PDF format -  HPC are unable to modify these parts. For parts that can be modified to order, please see the ZG and ZPG ranges. Part number CLG2-12 CLG2-15 CLG2-16 CLG2-20 CLG2-24 CLG2-25 CLG2-26 CLG2-30 CLG2-32 CLG2-34 CLG2-35 CLG2-36 CLG2-40 CLG2-45 CLG2-48 CLG2-50 CLG2-60 CLG2-65 CLG2-70 CLG2-72 CLG2-75 CLG2-78 No. of teeth Outside 12 15 16 20 24 25 26 30 32 34 35 36 40 45 48 50 60 65 70 72 75 78 20 ole bored h A: Pre- e finished must b DISCOUNTS 35 Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request ØD PCD 28 35 36 44 52 54 56 64 68 72 74 76 84 94 100 104 124 134 144 148 154 ØP Boss 24 30 32 40 48 50 52 60 64 68 70 72 80 90 96 100 120 130 140 144 150 ØM Bore 18 22 25 30 35 35 40 40 45 45 45 50 50 60 60 60 60 60 60 60 60 ØA 8 8 8 10 10 10 14 14 16 16 16 16 16 16 16 20 20 20 20 20 20 160 156 60 25 Gears available up to this size *Depending on availability - Dimensions in mm 270 4 Volume  4 2013 HPC each Stock* Price 1 to 9 4 4 4 4 4 4 - 4 4 - - 4 4 - - 4 4 4 4 - - 4,23 F 4,23 F 5,49 F 5,49 F 7,54 F 7,54 F on request 9,59 F 11,42 F on request on request 13,65 F 13,65 F on request on request 17,75 F 22,76 F 25,19 F 25,19 F on request on request - On request www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 303 Module 2.0 - Quality standard 9 - Pressure angle 20° Nm kW Torque and power indication For 50 teeth at 1000 rpm StS 303 brass fibre SSG ØM ØA H8 s steel stainles ØP ØD 18 15 discounts 33 Qty. 1+ 6+ 20+ Disc. List -12% On request Teeth PCD Outside Boss Bore Part number Z ØP ØD ØM ØA SSG2-12-303 12 24 28 28 12 SSG2-15-303 15 30 34 25 15 SSG2-16-303 16 32 36 25 15 SSG2-18-303 18 36 40 30 15 SSG2-20-303 20 40 44 30 15 SSG2-22-303 22 44 48 35 15 SSG2-24-303 24 48 52 35 15 SSG2-30-303 30 60 64 40 20 SSG2-32-303 32 64 68 40 20 SSG2-36-303 36 72 76 50 20 SSG2-40-303 40 80 84 50 20 SSG2-44-303 44 88 92 60 20 SSG2-46-303 46 92 96 50 20 SSG2-48-303 48 96 100 50 20 SSG2-50-303 50 100 104 50 20 SSG2-54-303 54 108 112 50 20 SSG2-56-303 56 112 116 50 20 SSG2-60-303 60 120 124 50 20 SSG2-64-303 64 128 132 50 20 SSG2-66-303 66 132 136 50 20 SSG2-70-303 70 140 144 50 20 SSG2-290-303 290 - - - - - - - - - - - - - - - - - - - - - Price each 1 to 5 30,52 F 26,45 F 28,17 F 31,93 F 34,13 F 38,47 F 42,31 F 55,22 F 57,03 F 66,32 F 106,26 F 146,04 F 146,04 F 146,04 F 167,51 F 167,37 F 191,14 F 191,14 F 217,38 F 231,51 F 240,97 F Dimensions: contact us On request Gears available up to this size 580 584 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Stock* Volume 4 2013 4 271 Stainless steel spur gear Stainless steel 304L Module 2.0 SSG ØM ØA H8 - Quality standard 9 - Pressure angle 20° Nm kW Torque and power indication For 50 teeth at 1000 rpm StS 304L brass fibre 25 2,61 12,50 1,32 s steel stainles ØP ØD 20 15 10 1,04 35 discounts Qty. 1+ 6+ 20+ Disc. List -12% On request Part Teeth PCD Outside number Z ØP ØD SSG2-12-304L 12 24 28 SSG2-15-304L 15 30 34 SSG2-16-304L 16 32 36 SSG2-18-304L 18 36 40 SSG2-20-304L 20 40 44 SSG2-22-304L 22 44 48 SSG2-24-304L 24 48 52 SSG2-30-304L 30 60 64 SSG2-32-304L 32 64 68 SSG2-36-304L 36 72 76 SSG2-40-304L 40 80 84 SSG2-44-304L 44 88 92 SSG2-46-304L 46 92 96 SSG2-48-304L 48 96 100 SSG2-50-304L 50 100 104 SSG2-54-304L 54 108 112 SSG2-56-304L 56 112 116 SSG2-60-304L 60 120 124 SSG2-64-304L 64 128 132 SSG2-66-304L 66 132 136 SSG2-70-304L 70 140 144 Boss ØM 28 25 25 30 30 35 35 40 40 50 50 60 50 50 50 50 50 50 50 50 50 SSG2-290-304L Dimensions: contact us 290 Bore ØA 12 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Gears available up to this size 580 584 *Depending on availability - Dimensions in mm 272 4 Volume  4 2013 HPC Price each 1 to 5 38,19 F 33,07 F 35,21 F 39,95 F 42,69 F 48,00 F 52,85 F 68,90 F 71,18 F 82,73 F 132,83 F 182,55 F 182,55 F 182,55 F 209,40 F 209,40 F 238,93 F 238,93 F 271,72 F 288,55 F 300,31 F On request www.hpceurope.com - +33(0)4 37 496 496 Stainless steel spur gear Stainless steel 316L Module 2.0 - Quality standard 9 - Pressure angle 20° Nm kW Torque and power indication For 50 teeth at 1000 rpm StS 316L brass fibre 25 2,61 12,50 1,32 SSG 10 1,04 ØM ØA H8 s steel stainles ØP ØD 22 15 discounts 37 Qty. 1+ 6+ 20+ Disc. List -12% On request Teeth PCD Outside Boss Bore Part number Z ØP ØD ØM ØA SSG2-12-316L 12 24 28 28 12 SSG2-15-316L 15 30 34 25 15 SSG2-16-316L 16 32 36 25 15 SSG2-18-316L 18 36 40 30 15 SSG2-20-316L 20 40 44 30 15 SSG2-22-316L 22 44 48 35 15 SSG2-24-316L 24 48 52 35 15 SSG2-30-316L 30 60 64 40 20 SSG2-32-316L 32 64 68 40 20 SSG2-36-316L 36 72 76 50 20 SSG2-40-316L 40 80 84 50 20 SSG2-44-316L 44 88 92 60 20 SSG2-46-316L 46 92 96 50 20 SSG2-48-316L 48 96 100 50 20 SSG2-50-316L 50 100 104 50 20 SSG2-54-316L 54 108 112 50 20 SSG2-56-316L 56 112 116 50 20 SSG2-60-316L 60 120 124 50 20 SSG2-64-316L 64 128 132 50 20 SSG2-66-316L 66 132 136 50 20 SSG2-70-316L 70 140 144 50 20 SSG2-290-316L 290 Gears available up to this size 580 584 *Depending on availability - Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com Dimensions: contact us HPC Price each 1 to 5 57,25 F 49,62 F 52,82 F 59,88 F 64,00 F 72,15 F 79,37 F 103,55 F 106,94 F 124,36 F 199,24 F 273,83 F 273,83 F 273,83 F 314,10 F 314,10 F 358,40 F 358,40 F 407,60 F 434,10 F 451,83 F On request Volume 4 2013 4 273 Steel spur gear Module 2.5 Steel 34C10 G PG (option) ØM ØA H8 - P  recision class 9 - P  ressure angle 20° - Linear speed 300m/min Nm kW Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 48 5 228 23,87 24 2,54 19 2,02 ØP 25 15 ØD 25 40 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Dimensions in mm PCD Outside ØP ØD 25,00 30,00 27,50 32,50 30,00 35,00 30,00 35,00 32,50 37,50 35,00 40,00 37,50 42,50 40,00 45,00 42,50 47,50 45,00 50,00 47,50 52,50 50,00 55,00 52,50 57,50 55,00 60,00 57,50 62,50 60,00 65,00 62,50 67,50 65,00 70,00 67,50 72,50 70,00 75,00 72,50 77,50 75,00 80,00 77,50 82,50 80,00 85,00 82,50 87,50 274 4 Volume  4 2013 Boss ØM 20 20 20 22 22 25 30 30 30 30 30 40 40 40 40 40 40 45 45 45 45 45 45 45 45 HPC Bore ØA 12 12 12 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) G PG 0,095 0,072 0,115 0,092 0,137 0,114 0,125 0,101 0,148 0,125 0,186 0,150 0,238 0,177 0,267 0,207 0,298 0,238 0,331 0,270 0,366 0,305 0,424 0,316 0,462 0,354 0,503 0,394 0,545 0,437 0,589 0,481 0,635 0,527 0,721 0,575 0,771 0,624 0,823 0,676 0,876 0,730 0,932 0,785 0,989 0,842 1,048 0,902 1,109 0,963 Price each 1 to 5 G PG 35,62 F 35,62 F 35,62 F 35,62 F 36,47 F 38,16 F 40,56 F 42,93 F 43,80 F 45,40 F 46,60 F 48,29 F 49,48 F 51,24 F 52,50 F 54,12 F 56,98 F 59,88 F 61,13 F 62,76 F 64,80 F 67,00 F 68,73 F 71,09 F 71,93 F On request Part number G2.5-9 G2.5-10 G2.5-11 G2.5-12 G2.5-13 G2.5-14 G2.5-15 G2.5-16 G2.5-17 G2.5-18 G2.5-19 G2.5-20 G2.5-21 G2.5-22 G2.5-23 G2.5-24 G2.5-25 G2.5-26 G2.5-27 G2.5-28 G2.5-29 G2.5-30 G2.5-31 G2.5-32 G2.5-33 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 86 90 96 98 100 105 110 115 G2.5-235 235 Dimensions in mm PCD ØP 85,00 87,50 90,00 92,50 95,00 97,50 100,00 102,50 105,00 107,50 110,00 112,50 115,00 117,50 120,00 122,50 125,00 127,50 130,00 132,50 135,00 137,50 140,00 142,50 145,00 147,50 150,00 155,00 160,00 162,50 165,00 170,00 175,00 177,50 180,00 182,50 185,00 187,50 190,00 195,00 200,00 215,00 225,00 240,00 245,00 250,00 262,50 275,00 287,50 Outside ØD 90,00 92,50 95,00 97,50 100,00 102,50 105,00 107,50 110,00 112,50 115,00 117,50 120,00 122,50 125,00 127,50 130,00 132,50 135,00 137,50 140,00 142,50 145,00 147,50 150,00 152,50 155,00 160,00 165,00 167,50 170,00 175,00 180,00 182,50 185,00 187,50 190,00 192,50 195,00 200,00 205,00 220,00 230,00 245,00 250,00 255,00 267,50 280,00 292,50 Boss ØM 45 45 45 45 45 45 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Bore ØA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Weight (kg) G PG 1,172 1,025 1,237 1,090 1,303 1,157 1,372 1,225 1,442 1,296 1,515 1,368 1,632 1,442 1,708 1,518 1,786 1,596 1,866 1,676 1,964 1,774 2,031 1,842 2,116 1,927 2,204 2,014 2,293 2,104 2,384 2,195 2,477 2,288 2,572 2,382 2,668 2,479 2,767 2,578 2,868 2,678 2,970 2,781 3,074 2,885 3,180 2,991 3,288 3,099 3,398 3,209 3,510 3,321 3,739 3,550 3,976 3,786 4,097 3,907 4,220 4,030 4,471 4,282 4,731 4,541 5,485 4,640 5,619 4,774 5,756 4,910 5,894 5,048 6,033 5,188 6,175 5,330 6,465 5,619 6,761 5,916 7,697 6,851 8,358 7,513 9,406 8,560 9,770 8,925 10,142 9,297 11,104 10,259 12,114 11,269 13,170 12,325 Gears available up to this size 587,50 592,50 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 73,65 F 75,29 F 79,37 F 80,48 F 82,78 F 83,94 F 85,99 F 88,09 F 89,43 F 90,36 F 91,45 F 92,66 F 94,81 F 96,60 F 99,24 F 101,93 F 104,73 F 105,53 F 107,27 F 108,15 F 109,24 F 119,87 F 121,94 F 124,18 F 126,02 F 127,85 F 129,98 F 147,09 F 166,09 F 177,97 F 195,71 F 204,32 F 216,67 F 229,94 F 243,92 F 252,90 F 262,87 F 272,95 F 281,37 F 288,11 F 293,22 F 298,86 F 326,85 F 351,90 F 372,10 F 417,53 F 452,94 F 480,76 F 523,72 F On request Part number G2.5-34 G2.5-35 G2.5-36 G2.5-37 G2.5-38 G2.5-39 G2.5-40 G2.5-41 G2.5-42 G2.5-43 G2.5-44 G2.5-45 G2.5-46 G2.5-47 G2.5-48 G2.5-49 G2.5-50 G2.5-51 G2.5-52 G2.5-53 G2.5-54 G2.5-55 G2.5-56 G2.5-57 G2.5-58 G2.5-59 G2.5-60 G2.5-62 G2.5-64 G2.5-65 G2.5-66 G2.5-68 G2.5-70 G2.5-71 G2.5-72 G2.5-73 G2.5-74 G2.5-75 G2.5-76 G2.5-78 G2.5-80 G2.5-86 G2.5-90 G2.5-96 G2.5-98 G2.5-100 G2.5-105 G2.5-110 G2.5-115 On request Volume 4 2013 4 275 HEAVY DUTY spur gear Steel 35NCD6 Module 2.5 YG XG (optional) ØM ØA H8  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØP .Options. 30 15 - Material 20NCD2 case-hardened Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened ØD 45 DISCOUNTS Nm 122 178 122 337 kW 12.65 18.65 12.68 35.06 Part number YG2.5-9 YG2.5-10 YG2.5-11 YG2.5-12 YG2.5-13 YG2.5-14 YG2.5-15 YG2.5-16 YG2.5-17 YG2.5-18 YG2.5-19 YG2.5-20 YG2.5-21 YG2.5-22 YG2.5-23 YG2.5-24 YG2.5-25 YG2.5-26 YG2.5-27 YG2.5-28 YG2.5-29 YG2.5-30 YG2.5-31 YG2.5-32 YG2.5-33 Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Dimensions in mm PCD ØP 25,00 27,50 30,00 30,00 32,50 35,00 37,50 40,00 42,50 45,00 47,50 50,00 52,50 55,00 57,50 60,00 62,50 65,00 67,50 70,00 72,50 75,00 77,50 80,00 82,50 276 4 Volume  4 2013 Outside ØD 30,00 32,50 35,00 35,00 37,50 40,00 42,50 45,00 47,50 50,00 52,50 55,00 57,50 60,00 62,50 65,00 67,50 70,00 72,50 75,00 77,50 80,00 82,50 85,00 87,50 30 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Boss ØM 30,00 32,50 35,00 35,00 35,00 35,00 35,00 35,00 35,00 35,00 35,00 45,00 45,00 45,00 45,00 45,00 45,00 45,00 45,00 45,00 60,00 60,00 60,00 60,00 60,00 HPC Bore ØA 12 12 12 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) YG XG 0,155 0,087 0,193 0,110 0,234 0,136 0,212 0,122 0,240 0,150 0,270 0,180 0,303 0,213 0,338 0,248 0,375 0,285 0,415 0,325 0,456 0,366 0,525 0,379 0,571 0,425 0,620 0,473 0,670 0,524 0,723 0,577 0,779 0,632 0,836 0,690 0,896 0,749 0,958 0,811 1,164 0,876 1,231 0,942 1,299 1,011 1,370 1,082 1,444 1,155 Price each 1 to 5 YG XG 47,61 F 47,61 F 47,61 F 47,61 F 48,62 F 50,84 F 54,14 F 57,28 F 58,45 F 60,57 F 62,22 F 64,39 F 66,02 F 68,29 F 70,01 F 72,17 F 76,02 F 79,86 F 81,54 F 84,30 F 86,40 F 89,36 F 91,63 F 94,82 F 95,90 F On request - - - - www.hpceurope.com - +33(0)4 37 496 496 PCD Outside ØP ØD 85,00 90,00 87,50 92,50 90,00 95,00 92,50 97,50 95,00 100,00 97,50 102,50 100,00 105,00 102,50 107,50 105,00 110,00 107,50 112,50 110,50 115,00 112,50 117,50 115,00 120,00 117,50 122,50 120,00 125,00 122,50 127,50 125,00 130,00 127,50 132,50 130,00 135,00 132,50 137,50 135,00 140,00 137,50 142,50 140,00 145,00 142,50 147,50 145,00 150,00 147,50 152,50 150,00 155,00 155,00 160,00 160,00 165,00 162,50 167,50 165,00 170,00 170,00 175,00 175,00 180,00 177,50 182,50 180,00 185,00 182,50 187,50 185,00 190,00 187,50 192,50 190,00 195,00 195,00 200,00 200,00 205,00 215,00 220,00 225,00 230,00 240,00 245,00 245,00 250,00 250,00 255,00 262,50 267,50 275,00 280,00 287,50 292,50 YG2.5-235 587,50 235 Dimensions in mm Boss ØM 60,00 60,00 60,00 60,00 60,00 60,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 75,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 100,00 127,00 127,00 127,00 127,00 127,00 127,00 127,00 127,00 127,00 127,00 Bore ØA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 Weight (kg) YG XG 1,519 1,231 1,597 1,308 1,677 1,388 1,759 1,471 1,844 1,555 1,930 1,642 2,202 1,731 2,293 1,822 2,387 1,916 2,483 2,011 2,600 2,129 2,681 2,210 2,783 2,312 2,888 2,417 2,995 2,524 3,105 2,634 3,216 2,745 3,330 2,859 3,446 2,975 3,564 3,093 3,685 3,214 3,808 3,337 3,933 3,462 4,060 3,589 4,190 3,719 4,322 3,851 4,850 3,985 5,125 4,260 5,409 4,544 5,554 4,689 5,702 4,837 6,004 5,139 6,315 5,450 6,474 5,608 6,635 5,770 6,798 5,933 6,964 6,099 7,132 6,267 7,302 6,437 8,141 6,743 8,497 7,099 9,619 8,222 10,413 9,015 11,670 10,273 12,108 10,710 12,554 11,156 13,709 12,311 14,920 13,523 16,188 14,790 Gears available up to this size 592,50 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 YG XG 98,23 F 100,37 F 105,87 F 107,41 F 110,41 F 111,98 F 128,91 F 117,47 F 119,31 F 120,53 F 122,00 F 123,57 F 126,39 F 128,84 F 132,35 F 135,91 F 139,68 F 140,81 F 142,69 F 144,22 F 145,73 F 168,89 F 168,89 F 168,89 F 168,89 F 170,46 F 173,27 F 196,21 F 221,50 F 237,39 F 261,00 F 272,46 F 288,94 F 306,63 F 325,27 F 337,19 F 350,56 F 363,92 F 377,33 F 384,17 F 390,99 F 398,50 F 435,82 F 469,25 F 496,17 F 556,84 F 603,98 F 641,09 F 698,38 F On request Teeth Part number Z YG2.5-34 34 YG2.5-35 35 YG2.5-36 36 YG2.5-37 37 YG2.5-38 38 YG2.5-39 39 YG2.5-40 40 YG2.5-41 41 YG2.5-42 42 YG2.5-43 43 YG2.5-44 44 YG2.5-45 45 YG2.5-46 46 YG2.5-47 47 YG2.5-48 48 YG2.5-49 49 YG2.5-50 50 YG2.5-51 51 YG2.5-52 52 YG2.5-53 53 YG2.5-54 54 YG2.5-55 55 YG2.5-56 56 YG2.5-57 57 YG2.5-58 58 YG2.5-59 59 YG2.5-60 60 YG2.5-62 62 YG2.5-64 64 YG2.5-65 65 YG2.5-66 66 YG2.5-68 68 YG2.5-70 70 YG2.5-71 71 YG2.5-72 72 YG2.5-73 73 YG2.5-74 74 YG2.5-75 75 YG2.5-76 76 YG2.5-78 78 YG2.5-80 80 YG2.5-86 86 YG2.5-90 90 YG2.5-96 96 YG2.5-98 98 YG2.5-100 100 YG2.5-105 105 YG2.5-110 110 YG2.5-115 115 On request Volume 4 2013 4 277 Plastic spur gear Machined Delrin Module 2.5 - - - - ZG ZPG (option) ØM  achined parts M Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 11 Nm ØP ØD 18 12 30 18 discounts 30+ Qty. 1+ 6+ Disc. List -22% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Dimensions in mm PCD ØP 25,00 27,50 30,00 30,00 32,50 35,00 37,50 40,00 42,50 45,00 47,50 50,00 52,50 55,00 57,50 60,00 62,50 65,00 67,50 70,00 72,50 75,00 278 4 Volume  4 2013 Outside ØD 30,00 32,50 35,00 35,00 37,50 40,00 42,50 45,00 47,50 50,00 52,50 55,00 57,50 60,00 62,50 65,00 67,50 70,00 72,50 75,00 77,50 80,00 Boss ØM 30 30 30 30 30 30 30 30 30 36 36 36 36 36 36 36 36 36 36 45 45 45 HPC Bore ØA 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 Weight (kg) ZG ZPG 0,019 0,010 0,022 0,012 0,024 0,015 0,023 0,014 0,026 0,017 0,029 0,020 0,032 0,023 0,036 0,026 0,039 0,030 0,048 0,034 0,052 0,038 0,057 0,043 0,061 0,047 0,066 0,052 0,071 0,057 0,077 0,063 0,082 0,068 0,088 0,074 0,094 0,080 0,107 0,085 0,113 0,091 0,120 0,098 Price each 1 to 5 ZG ZPG 15,51 F 15,81 F 16,15 F 16,48 F 16,75 F 16,91 F 17,06 F 17,59 F 20,61 F 21,06 F 21,75 F 22,33 F 26,32 F 26,95 F 29,27 F 31,97 F 35,50 F 37,35 F 39,23 F 40,05 F 41,11 F 42,45 F On request Part number ZG2.5-9 ZG2.5-10 ZG2.5-11 ZG2.5-12 ZG2.5-13 ZG2.5-14 ZG2.5-15 ZG2.5-16 ZG2.5-17 ZG2.5-18 ZG2.5-19 ZG2.5-20 ZG2.5-21 ZG2.5-22 ZG2.5-23 ZG2.5-24 ZG2.5-25 ZG2.5-26 ZG2.5-27 ZG2.5-28 ZG2.5-29 ZG2.5-30 www.hpceurope.com - +33(0)4 37 496 496 Teeth Z 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 62 64 65 66 68 70 71 72 73 74 75 76 78 80 PCD ØP 77,50 80,00 82,50 85,00 87,50 90,00 92,50 95,00 97,50 100,00 102,50 105,00 107,50 110,50 112,50 115,00 117,50 120,00 122,50 125,00 127,50 130,00 132,50 135,00 137,50 140,00 142,50 145,00 147,50 150,00 155,00 160,00 162,50 165,00 170,00 175,00 177,50 180,00 182,50 185,00 187,50 190,00 195,00 200,00 Outside ØD 82,50 85,00 87,50 90,00 92,50 95,00 97,50 100,00 102,50 105,00 107,50 110,00 112,50 115,00 117,50 120,00 122,50 125,00 127,50 130,00 132,50 135,00 137,50 140,00 142,50 145,00 147,50 150,00 152,50 155,00 160,00 165,00 167,50 170,00 175,00 180,00 182,50 185,00 187,50 190,00 192,50 195,00 200,00 205,00 ZG2.5-235 235 587,50 592,50 Dimensions in mm Boss ØM 45 45 45 45 45 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 Bore ØA 15 15 15 15 15 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) ZG ZPG 0,127 0,105 0,134 0,112 0,141 0,120 0,149 0,127 0,157 0,135 0,169 0,142 0,177 0,150 0,186 0,159 0,194 0,168 0,203 0,177 0,213 0,186 0,222 0,195 0,232 0,205 0,244 0,217 0,252 0,225 0,262 0,235 0,273 0,246 0,283 0,257 0,294 0,268 0,306 0,279 0,317 0,290 0,329 0,302 0,341 0,314 0,353 0,326 0,365 0,338 0,378 0,351 0,408 0,362 0,421 0,375 0,435 0,388 0,448 0,402 0,476 0,430 0,504 0,458 0,519 0,473 0,534 0,488 0,564 0,518 0,596 0,549 0,612 0,566 0,628 0,582 0,645 0,598 0,661 0,615 0,678 0,632 0,695 0,649 0,730 0,684 0,766 0,720 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 49,72 F 51,03 F 52,78 F 53,47 F 54,64 F 62,45 F 63,31 F 72,16 F 73,40 F 75,18 F 77,03 F 78,21 F 79,02 F 79,91 F 81,19 F 91,14 F 92,95 F 95,44 F 98,01 F 100,65 F 101,58 F 102,95 F 103,99 F 114,69 F 119,18 F 127,93 F 130,40 F 132,43 F 134,15 F 136,42 F 154,38 F 188,83 F 202,36 F 222,55 F 232,36 F 218,50 F 261,44 F 277,27 F 287,55 F 294,34 F 275,36 F 285,51 F 311,07 F 493,18 F On request Part number ZG2.5-31 ZG2.5-32 ZG2.5-33 ZG2.5-34 ZG2.5-35 ZG2.5-36 ZG2.5-37 ZG2.5-38 ZG2.5-39 ZG2.5-40 ZG2.5-41 ZG2.5-42 ZG2.5-43 ZG2.5-44 ZG2.5-45 ZG2.5-46 ZG2.5-47 ZG2.5-48 ZG2.5-49 ZG2.5-50 ZG2.5-51 ZG2.5-52 ZG2.5-53 ZG2.5-54 ZG2.5-55 ZG2.5-56 ZG2.5-57 ZG2.5-58 ZG2.5-59 ZG2.5-60 ZG2.5-62 ZG2.5-64 ZG2.5-65 ZG2.5-66 ZG2.5-68 ZG2.5-70 ZG2.5-71 ZG2.5-72 ZG2.5-73 ZG2.5-74 ZG2.5-75 ZG2.5-76 ZG2.5-78 ZG2.5-80 On request Volume 4 2013 4 279 Moulded plastic spur gear Nylon 6 moulded ole bored h A: Pre- e finished must b CLG - M  oulded parts - Pressure angle 20° - Material: Nylon 6 Reinforced with 30% glass fibres Module 2.5 .Options. - A  lternative number of teeth, a datasheet is available from ØD ØA www.hpceurope.com in PDF format - HPC are unable to modify these parts. For parts that can be modified to order, please see the ZG and ZPG ranges. Economy Part number CLG2.5-12 CLG2.5-14 CLG2.5-15 CLG2.5-16 CLG2.5-18 CLG2.5-20 CLG2.5-22 CLG2.5-23 CLG2.5-24 CLG2.5-25 CLG2.5-26 CLG2.5-27 CLG2.5-28 CLG2.5-29 CLG2.5-30 CLG2.5-32 CLG2.5-35 CLG2.5-40 CLG2.5-45 CLG2.5-50 CLG2.5-57 CLG2.5-62 range No. of teeth Outside 12 14 15 16 18 20 22 23 24 25 26 27 28 29 30 32 35 40 45 50 57 62 ØM ØP 25 DISCOUNTS 40 Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request ØD PCD 35,00 40,00 42,50 45,00 50,00 55,00 60,00 62,50 65,00 67,50 70,00 72,50 75,00 77,50 80,00 85,00 92,50 105,00 117,50 130,00 147,50 ØP Boss 30,00 35,00 37,50 40,00 45,00 50,00 55,00 57,50 60,00 62,50 65,00 67,50 70,00 72,50 75,00 80,00 87,50 100,00 112,50 125,00 142,50 ØM Bore 22 22 30 30 35 35 40 40 40 40 40 40 40 40 45 50 50 60 60 60 60 ØA 8 8 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 160,00 155,00 60 25 Gears available up to this size *Depending on availability - Dimensions in mm 280 4 Volume  4 2013 HPC Stock* Stock* Price each 4 - 4 4 4 4 - - - 4 - - - - - - - - - 4 - 1 to 9 5,85 F on request 5,85 F 8,48 F 8,48 F 8,48 F on request on request on request 11,63 F on request on request on request on request 14,75 F on request 17,57 F on request 26,29 F 29,09 F on request - on request www.hpceurope.com - +33(0)4 37 496 496 Order on-line More than 30 000 articles Free delivery* for orders over 50 e www.hpceurope.com - +33(0)4 37 496 496 *Products less than 1m in length only (France mainland) Steel spur gear Module 3.0 Steel 34C10 G PG (optional) ØM - P  recision class 9 - P  ressure angle 20° - Linear speed 300m/min Nm kW ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass 88 8.95 421 44.01 44 4.66 35 3.73 ØP 30 20 ØD 50 30 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Dimensions in mm PCD ØP 30,00 33,00 36,00 36,00 39,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 93,00 96,00 282 4 Volume  4 2013 Outside ØD 36,00 39,00 42,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 93,00 96,00 99,00 102,00 Boss ØM 28 28 28 28 28 30 30 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 HPC Bore ØA 15 15 15 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 Weight (kg) G PG 0,189 0,122 0,223 0,156 0,260 0,193 0,208 0,162 0,248 0,202 0,306 0,246 0,353 0,293 0,488 0,343 0,541 0,397 0,598 0,454 0,658 0,514 0,762 0,536 0,828 0,603 0,898 0,673 0,971 0,746 1,047 0,822 1,127 0,902 1,210 0,984 1,296 1,070 1,385 1,160 1,477 1,252 1,573 1,348 1,672 1,447 1,774 1,549 Price each 1 to 5 G PG 24,03 F 24,03 F 24,03 F 24,03 F 24,88 F 25,97 F 26,76 F 28,44 F 30,03 F 31,58 F 32,85 F 33,86 F 35,00 F 36,19 F 37,32 F 38,44 F 40,74 F 43,03 F 44,07 F 45,34 F 47,18 F 48,84 F 50,56 F 52,40 F On request Part number G3-9 G3-10 G3-11 G3-12 G3-13 G3-14 G3-15 G3-16 G3-17 G3-18 G3-19 G3-20 G3-21 G3-22 G3-23 G3-24 G3-25 G3-26 G3-27 G3-28 G3-29 G3-30 G3-31 G3-32 www.hpceurope.com - +33(0)4 37 496 496 G3-195 Teeth Z 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 68 70 72 75 76 78 80 82 84 86 88 90 92 94 95 96 195 Dimensions in mm PCD Outside ØP ØD 99,00 105,00 102,00 108,00 105,00 111,00 108,00 114,00 111,00 117,00 114,00 120,00 117,00 123,00 120,00 126,00 123,00 129,00 126,00 132,00 129,00 135,00 132,00 138,00 135,00 141,00 138,00 144,00 141,00 147,00 144,00 150,00 147,00 153,00 150,00 156,00 153,00 159,00 156,00 162,00 159,00 165,00 162,00 168,00 165,00 171,00 168,00 174,00 171,00 177,00 174,00 180,00 177,00 183,00 180,00 186,00 183,00 189,00 186,00 192,00 189,00 195,00 192,00 198,00 195,00 201,00 204,00 210,00 210,00 216,00 216,00 220,00 225,00 231,00 228,00 234,00 234,00 240,00 240,00 246,00 246,00 252,00 252,00 258,00 258,00 264,00 264,00 270,00 270,00 276,00 276,00 282,00 282,00 288,00 285,00 291,00 288,00 294,00 Boss ØM 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Bore ØA 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 20 30 30 30 30 30 30 30 30 30 Weight (kg) G PG 1,880 1,654 1,989 1,763 2,233 1,875 2,348 1,990 2,466 2,109 2,588 2,230 2,713 2,355 2,841 2,484 2,973 2,615 3,107 2,750 3,245 2,888 3,386 3,029 3,531 3,173 3,679 3,321 3,829 3,472 3,984 3,626 4,141 3,783 4,302 3,944 4,466 4,108 4,633 4,275 4,803 4,445 4,977 4,619 5,154 4,796 5,334 4,976 5,517 5,159 5,704 5,346 5,894 5,536 6,087 5,729 6,283 5,925 6,483 6,125 6,685 6,328 8,107 6,484 8,316 6,694 8,964 7,341 9,412 7,789 9,873 8,250 10,588 8,965 10,833 9,210 11,333 9,710 11,846 10,223 12,371 10,749 12,910 11,288 13,462 11,839 14,027 12,404 14,604 12,982 15,195 13,572 15,799 14,176 16,105 14,483 16,415 14,793 Gears available up to this size 585,00 591,00 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 55,27 F 56,41 F 60,77 F 63,07 F 64,33 F 65,25 F 66,09 F 67,05 F 68,21 F 69,08 F 75,31 F 84,48 F 99,10 F 100,00 F 100,70 F 106,87 F 109,07 F 106,66 F 113,68 F 117,54 F 121,54 F 125,16 F 131,11 F 133,21 F 135,33 F 137,46 F 141,43 F 145,28 F 149,26 F 153,21 F 157,24 F 160,78 F 161,71 F 173,15 F 187,05 F 193,05 F 207,98 F 209,62 F 220,75 F 231,99 F 244,86 F 256,64 F 277,30 F 294,46 F 305,41 F 314,94 F 335,54 F 349,11 F 361,41 F On request Part number G3-33 G3-34 G3-35 G3-36 G3-37 G3-38 G3-39 G3-40 G3-41 G3-42 G3-43 G3-44 G3-45 G3-46 G3-47 G3-48 G3-49 G3-50 G3-51 G3-52 G3-53 G3-54 G3-55 G3-56 G3-57 G3-58 G3-59 G3-60 G3-61 G3-62 G3-63 G3-64 G3-65 G3-68 G3-70 G3-72 G3-75 G3-76 G3-78 G3-80 G3-82 G3-84 G3-86 G3-88 G3-90 G3-92 G3-94 G3-95 G3-96 On request Volume 4 2013 4 283 HEAVY DUTY spur gear Steel 35NCD6 Module 3.0 YG XG (optional) ØM - - - -  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened Nm 122 178 122 337 kW 12,65 18,65 12,68 35,06 ØP 35 20 ØD 35 55 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Dimensions in mm PCD ØP 30,00 33,00 36,00 36,00 39,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 93,00 284 4 Volume  4 2013 Outside ØD 36,00 39,00 42,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 93,00 96,00 99,00 Boss ØM 36 39 42 42 45 45 45 45 45 45 45 60 60 60 60 60 60 60 60 60 60 60 60 HPC Bore ØA 15 15 15 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 Weight (kg) YG XG 0,27 0,14 0,34 0,18 0,41 0,23 0,35 0,19 0,43 0,24 0,48 0,29 0,54 0,34 0,60 0,40 0,66 0,46 0,72 0,53 0,79 0,60 0,98 0,63 1,06 0,70 1,14 0,78 1,23 0,87 1,32 0,96 1,41 1,05 1,51 1,15 1,61 1,25 1,71 1,35 1,82 1,46 1,93 1,57 2,05 1,69 Price each 1 to 5 YG XG 32,25 F 32,25 F 32,25 F 32,25 F 33,37 F 34,84 F 35,87 F 38,16 F 40,29 F 42,48 F 44,07 F 45,41 F 47,00 F 48,57 F 50,07 F 51,55 F 54,63 F 57,73 F 59,07 F 60,84 F 63,28 F 65,57 F 67,89 F On request Part number YG3-9 YG3-10 YG3-11 YG3-12 YG3-13 YG3-14 YG3-15 YG3-16 YG3-17 YG3-18 YG3-19 YG3-20 YG3-21 YG3-22 YG3-23 YG3-24 YG3-25 YG3-26 YG3-27 YG3-28 YG3-29 YG3-30 YG3-31 www.hpceurope.com - +33(0)4 37 496 496 YG3-195 Teeth Z 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 68 70 72 75 76 78 80 82 84 86 88 90 92 94 95 96 PCD ØP 96,00 99,00 102,00 105,00 108,00 111,00 114,00 117,00 120,00 123,00 126,00 129,00 132,00 135,00 138,00 141,00 144,00 147,00 150,00 153,00 156,00 159,00 162,00 165,00 168,00 171,00 174,00 177,00 180,00 183,00 186,00 189,00 192,00 195,00 204,00 210,00 216,00 225,00 228,00 234,00 240,00 246,00 252,00 259,00 264,00 270,00 276,00 282,00 285,00 288,00 Outside ØD 102,00 105,00 108,00 111,00 114,00 117,00 120,00 123,00 126,00 129,00 132,00 135,00 138,00 141,00 144,00 147,00 150,00 153,00 156,00 159,00 162,00 165,00 168,00 171,00 174,00 177,00 180,00 183,00 186,00 189,00 192,00 195,00 198,00 201,00 210,00 216,00 220,00 231,00 234,00 240,00 246,00 252,00 258,00 264,00 270,00 276,00 282,00 288,00 291,00 294,00 195 585,00 591,00 Dimensions in mm Boss ØM 60 60 75 75 75 75 75 75 75 75 75 75 100 100 100 100 100 100 100 100 100 100 100 100 100 127 127 127 127 127 127 127 127 127 127 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Bore ØA 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Weight (kg) YG XG 2,16 1,81 2,29 1,93 2,66 2,06 2,79 2,19 2,92 2,32 3,06 2,46 3,20 2,60 3,35 2,75 3,50 2,90 3,65 3,05 3,81 3,21 3,97 3,37 4,66 3,53 4,83 3,70 5,00 3,87 5,18 4,05 5,36 4,23 5,54 4,41 5,73 4,60 5,92 4,79 6,11 4,99 6,31 5,19 6,52 5,39 6,72 5,60 6,93 5,81 7,88 6,02 8,10 6,24 8,32 6,46 8,55 6,68 8,78 6,91 9,01 7,15 9,25 7,38 9,49 7,62 9,73 7,87 10,49 8,62 11,68 9,09 12,22 9,62 13,06 10,46 13,34 10,75 13,92 11,33 14,52 11,93 15,14 12,54 15,77 13,17 16,41 13,81 17,07 14,47 17,74 15,15 18,43 15,83 19,13 16,54 19,49 16,90 19,85 17,26 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 YG XG 73,42 F 74,16 F 75,65 F 81,50 F 84,62 F 92,34 F 92,34 F 92,34 F 89,96 F 91,55 F 107,91 F 107,91 F 113,35 F 140,74 F 140,74 F 140,74 F 136,57 F 141,96 F 153,00 F 152,39 F 157,68 F 162,99 F 178,03 F 175,88 F 178,66 F 181,43 F 184,35 F 222,53 F 222,53 F 222,53 F 222,53 F 222,53 F 222,53 F 292,09 F 292,09 F 292,09 F 292,09 F 344,95 F 344,95 F 344,95 F 344,95 F 378,33 F 378,33 F 433,97 F 433,97 F 472,93 F 506,31 F 506,31 F 575,32 F 575,32 F On request Part number YG3-32 YG3-33 YG3-34 YG3-35 YG3-36 YG3-37 YG3-38 YG3-39 YG3-40 YG3-41 YG3-42 YG3-43 YG3-44 YG3-45 YG3-46 YG3-47 YG3-48 YG3-49 YG3-50 YG3-51 YG3-52 YG3-53 YG3-54 YG3-55 YG3-56 YG3-57 YG3-58 YG3-59 YG3-60 YG3-61 YG3-62 YG3-63 YG3-64 YG3-65 YG3-68 YG3-70 YG3-72 YG3-75 YG3-76 YG3-78 YG3-80 YG3-82 YG3-84 YG3-86 YG3-88 YG3-90 YG3-92 YG3-94 YG3-95 YG3-96 On request Volume 4 2013 4 285 Plastic spur gear Machined Delrin Module 3.0 - - - - ZG ZPG (optional) ØM  achined parts M Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 18 Nm ØP ØD 20 12 20 32 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Dimensions in mm PCD ØP 30,00 33,00 36,00 36,00 39,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 286 4 Volume  4 2013 Outside ØD 36,00 39,00 42,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 69,00 72,00 75,00 78,00 81,00 84,00 87,00 90,00 93,00 96,00 Boss ØM 36 36 36 36 36 36 40 40 40 48 48 48 48 48 48 48 48 60 60 60 60 60 HPC Bore ØA 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 Weight (kg) ZG ZPG 0,029 0,015 0,033 0,019 0,037 0,023 0,035 0,022 0,039 0,026 0,044 0,031 0,053 0,036 0,059 0,042 0,065 0,048 0,080 0,054 0,086 0,061 0,093 0,068 0,101 0,076 0,109 0,083 0,117 0,092 0,125 0,100 0,134 0,109 0,154 0,115 0,163 0,124 0,173 0,134 0,184 0,145 0,194 0,156 Price each 1 to 5 ZG ZPG 13,81 F 13,81 F 13,81 F 13,81 F 14,33 F 17,00 F 17,57 F 18,63 F 19,65 F 20,73 F 21,52 F 22,36 F 31,26 F 32,30 F 33,35 F 34,36 F 36,38 F 40,73 F 41,73 F 42,89 F 44,59 F 46,21 F On request Part number ZG3-9 ZG3-10 ZG3-11 ZG3-12 ZG3-13 ZG3-14 ZG3-15 ZG3-16 ZG3-17 ZG3-18 ZG3-19 ZG3-20 ZG3-21 ZG3-22 ZG3-23 ZG3-24 ZG3-25 ZG3-26 ZG3-27 ZG3-28 ZG3-29 ZG3-30 www.hpceurope.com - +33(0)4 37 496 496 ZG3-195 Teeth Z 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 68 70 72 PCD ØP 93,00 96,00 99,00 102,00 105,00 108,00 111,00 114,00 117,00 120,00 123,00 126,00 129,00 132,00 135,00 138,00 141,00 144,00 147,00 150,00 153,00 156,00 159,00 162,00 165,00 168,00 171,00 174,00 177,00 180,00 183,00 186,00 189,00 192,00 195,00 204,00 210,00 216,00 Outside ØD 99,00 102,00 105,00 108,00 111,00 114,00 117,00 120,00 123,00 126,00 129,00 132,00 135,00 138,00 141,00 144,00 147,00 150,00 153,00 156,00 159,00 162,00 165,00 168,00 171,00 174,00 177,00 180,00 183,00 186,00 189,00 192,00 195,00 198,00 201,00 210,00 216,00 220,00 195 585,00 591,00 Dimensions in mm Boss ØM 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 Bore ØA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Weight (kg) ZG ZPG 0,205 0,167 0,217 0,178 0,229 0,190 0,241 0,202 0,253 0,215 0,266 0,228 0,280 0,241 0,293 0,254 0,307 0,268 0,322 0,283 0,336 0,298 0,351 0,313 0,367 0,328 0,383 0,344 0,399 0,360 0,415 0,377 0,432 0,394 0,450 0,411 0,467 0,428 0,485 0,446 0,504 0,465 0,522 0,484 0,541 0,503 0,595 0,522 0,615 0,542 0,635 0,562 0,655 0,583 0,676 0,603 0,697 0,625 0,719 0,646 0,741 0,668 0,763 0,691 0,786 0,713 0,809 0,737 0,833 0,760 0,905 0,833 0,955 0,883 1,007 0,934 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 ZG ZPG 53,28 F 55,16 F 58,20 F 64,39 F 69,31 F 71,99 F 74,39 F 75,48 F 82,28 F 83,49 F 84,98 F 87,13 F 93,78 F 105,21 F 130,54 F 130,54 F 130,54 F 130,54 F 130,54 F 148,10 F 153,26 F 158,46 F 158,46 F 184,14 F 184,14 F 184,14 F 184,14 F 184,14 F 220,04 F 226,24 F 228,79 F 228,79 F 228,79 F 228,79 F 362,72 F 362,72 F 362,72 F 362,72 F On request Part number ZG3-31 ZG3-32 ZG3-33 ZG3-34 ZG3-35 ZG3-36 ZG3-37 ZG3-38 ZG3-39 ZG3-40 ZG3-41 ZG3-42 ZG3-43 ZG3-44 ZG3-45 ZG3-46 ZG3-47 ZG3-48 ZG3-49 ZG3-50 ZG3-51 ZG3-52 ZG3-53 ZG3-54 ZG3-55 ZG3-56 ZG3-57 ZG3-58 ZG3-59 ZG3-60 ZG3-61 ZG3-62 ZG3-63 ZG3-64 ZG3-65 ZG3-68 ZG3-70 ZG3-72 On request Volume 4 2013 4 287 Moulded plastic spur gear Nylon 6 moulded Module 3.0 y range Econom CLG - M  oulded parts - Pressure angle 20° - Material: Nylon 6 Reinforced with 30% glass fibres ØD ØA ØM ØP .Options. - A  lternative number of teeth, a datasheet is available from www.hpceurope.com in PDF format - HPC are unable to modify these parts. For parts that can be modified to order, please see the ZG and ZPG ranges. Part number CLG3-12 CLG3-14 CLG3-15 CLG3-16 CLG3-18 CLG3-20 CLG3-22 CLG3-23 CLG3-24 CLG3-25 CLG3-26 CLG3-27 CLG3-28 CLG3-29 CLG3-30 CLG3-32 CLG3-35 CLG3-40 CLG3-45 CLG3-50 CLG3-55 No. of teeth Outside 12 14 15 16 18 20 22 23 24 25 26 27 28 29 30 32 35 40 45 50 55 CLG3-60 60 30 bored A: Pre- st be hole mu hed finis DISCOUNTS 45 Qty. 1+ 10+ 50+ 100+ 1000+ Disc. List -10% -25% -35% On request ØD PCD 42 48 51 54 60 66 72 75 78 81 84 87 90 93 96 102 111 126 141 156 171 ØP Boss 36 42 45 48 54 60 66 69 72 75 78 81 84 87 90 96 105 120 135 150 165 ØM Bore 25 30 35 40 45 45 45 45 45 45 45 45 50 50 50 50 50 60 60 60 60 ØA 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 186 180 60 25 Gears available up to this size *Depending on availability - Dimensions in mm 288 4 Volume  4 2013 HPC each Stock* Stock* Price 1 to 9 4 - 4 4 4 4 - - - 4 - - - - 4 - 4 4 - - - 7,93 F on request 7,93 F 15,15 F 15,15 F 15,15 F on request on request on request 20,71 F on request on request on request on request 25,75 F on request 31,09 F 37,43 F 42,05 F 43,92 F on request - on request www.hpceurope.com - +33(0)4 37 496 496 Technical support ces For all your questions and requests for quotation To ler an ) ul d a ( orm F Advi = mz ce www.hpceurope.com - +33(0)4 37 496 496 Steel spur gear Module 4.0 Steel 34C10 G PG (optional) ØM - P  recision class 9 - P  ressure angle 20° - Linear speed 300m/min ØA H8 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass Nm 200 953 100 kW 20.88 99.96 10.44 80 8.20 ØP 40 20 ØD 40 60 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Dimensions in mm PCD ØP 40,00 44,00 48,00 48,00 52,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 290 4 Volume  4 2013 Outside ØD 48,00 52,00 56,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 124,00 128,00 Boss ØM 30 34 38 38 38 40 40 50 50 50 50 50 50 50 50 50 80 80 80 80 80 80 HPC Bore ØA 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 Weight (kg) G PG 0,349 0,288 0,460 0,369 0,502 0,404 0,502 0,404 0,598 0,500 0,721 0,604 0,832 0,715 1,060 0,834 1,187 0,961 1,321 1,096 1,464 1,238 1,614 1,388 1,771 1,546 1,937 1,711 2,110 1,884 2,291 2,065 2,849 2,188 3,045 2,384 3,249 2,588 3,460 2,799 3,680 3,018 3,907 3,245 Price each 1 to 5 G PG 28,29 F 28,29 F 28,29 F 28,92 F 30,52 F 32,73 F 37,15 F 41,19 F 43,42 F 45,62 F 47,32 F 49,58 F 51,36 F 54,06 F 55,12 F 56,19 F 58,43 F 60,87 F 63,54 F 65,99 F 68,25 F 70,71 F On request Part number G4-9 G4-10 G4-11 G4-12 G4-13 G4-14 G4-15 G4-16 G4-17 G4-18 G4-19 G4-20 G4-21 G4-22 G4-23 G4-24 G4-25 G4-26 G4-27 G4-28 G4-29 G4-30 www.hpceurope.com - +33(0)4 37 496 496 G4-145 Teeth Z 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 PCD ØP 124,00 128,00 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 Outside ØD 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 292,00 296,00 145 580,00 588,00 Dimensions in mm Boss ØM 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 120 120 120 120 120 120 120 120 120 120 120 120 120 120 150 150 150 150 150 150 150 150 Bore ØA 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 38 Weight (kg) G PG 4,141 3,480 4,383 3,722 4,633 3,972 4,891 4,230 5,157 4,495 5,430 4,769 5,710 5,049 5,999 5,338 6,295 5,634 6,599 5,938 6,911 6,249 7,230 6,569 7,557 6,896 7,891 7,230 8,234 7,573 8,584 7,923 8,941 8,280 9,307 8,646 9,680 9,019 10,061 9,400 11,411 9,788 11,807 10,184 12,211 10,588 12,622 11,000 13,042 11,419 13,469 11,846 13,903 12,281 14,346 12,723 14,796 13,173 15,253 13,631 15,719 14,096 16,192 14,569 16,673 15,050 17,161 15,538 18,435 15,904 18,939 16,408 19,450 16,919 19,970 17,439 20,497 17,966 21,031 18,500 21,573 19,043 22,124 19,593 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 G PG 75,40 F 79,83 F 88,58 F 91,35 F 100,38 F 104,91 F 111,21 F 112,90 F 119,21 F 123,19 F 127,87 F 139,49 F 141,81 F 144,23 F 146,60 F 148,30 F 149,98 F 151,66 F 186,59 F 186,59 F 186,59 F 186,59 F 186,59 F 186,59 F 219,71 F 219,71 F 219,71 F 211,91 F 220,61 F 226,17 F 273,95 F 276,47 F 281,49 F 287,37 F 299,50 F 309,70 F 320,67 F 330,16 F 338,87 F 345,97 F 415,38 F 415,38 F On request Part number G4-31 G4-32 G4-33 G4-34 G4-35 G4-36 G4-37 G4-38 G4-39 G4-40 G4-41 G4-42 G4-43 G4-44 G4-45 G4-46 G4-47 G4-48 G4-49 G4-50 G4-51 G4-52 G4-53 G4-54 G4-55 G4-56 G4-57 G4-58 G4-59 G4-60 G4-61 G4-62 G4-63 G4-64 G4-65 G4-66 G4-67 G4-68 G4-69 G4-70 G4-71 G4-72 On request Volume 4 2013 4 291 HEAVY DUTY spur gear Steel 35NCD6 Module 4.0 - - - - YG XG (option) ØM  reater torque G Precision class 9 Pressure angle 20° Linear speed 300m/min ØA H8 .Options. ØP - Material 20NCD2 case-hardened Nm kW Torque and power indication For 50 teeth at 1000 rpm 35NCD6 20NCD2 35NCD6 hardened 20NCD2 hardened 420 44 665 69 510 52.96 ØD 45 25 45 70 1256 131 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Dimensions in mm PCD ØP 40,00 44,00 48,00 48,00 52,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 292 4 Volume  4 2013 Outside ØD 48,00 52,00 56,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 124,00 128,00 Boss ØM 48 52 56 56 60 60 60 60 60 60 60 60 60 75 75 75 75 75 75 75 100 100 HPC Bore ØA 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 Weight (kg) YG XG 0,61 0,32 0,76 0,42 0,83 0,45 0,83 0,45 1,01 0,56 1,13 0,68 1,25 0,80 1,39 0,94 1,53 1,08 1,68 1,23 1,84 1,39 2,01 1,56 2,19 1,74 2,68 1,93 2,87 2,12 3,07 2,32 3,17 2,46 3,39 2,68 3,62 2,91 3,86 3,15 4,76 3,40 5,02 3,65 Price each 1 to 5 YG XG 37,80 F 37,80 F 37,80 F 37,86 F 40,75 F 43,70 F 49,55 F 54,94 F 57,89 F 60,87 F 63,10 F 65,42 F 68,54 F 72,16 F 73,62 F 91,49 F 91,49 F 91,49 F 115,06 F 115,06 F 115,06 F 115,06 F On request Part number YG4-9 YG4-10 YG4-11 YG4-12 YG4-13 YG4-14 YG4-15 YG4-16 YG4-17 YG4-18 YG4-19 YG4-20 YG4-21 YG4-22 YG4-23 YG4-24 YG4-25 YG4-26 YG4-27 YG4-28 YG4-29 YG4-30 www.hpceurope.com - +33(0)4 37 496 496 G4-145 Teeth Z 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 PCD ØP 124,00 128,00 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 Outside ØD 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 292,00 296,00 145 580,00 588,00 Dimensions in mm Boss ØM 100 100 100 100 100 100 100 100 100 100 100 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 150 150 150 150 150 150 150 150 Bore ØA 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 38 38 Weight (kg) YG XG 5,28 3,92 5,55 4,19 5,84 4,47 6,13 4,76 6,42 5,06 6,73 5,36 7,05 5,68 7,37 6,01 7,71 6,34 8,05 6,68 8,40 7,03 9,68 7,39 10,05 7,76 10,42 8,13 10,81 8,52 11,20 8,91 11,60 9,32 12,01 9,73 12,43 10,15 12,86 10,57 13,30 11,01 13,75 11,46 14,20 11,91 14,66 12,37 15,13 12,85 15,61 13,33 16,10 13,82 16,60 14,31 17,11 14,82 17,62 15,33 18,15 15,86 18,68 16,39 19,22 16,93 19,54 17,33 21,06 17,89 21,62 18,46 22,20 19,03 22,78 19,62 23,37 20,21 23,98 20,81 24,59 21,42 25,21 22,04 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 YG XG 134,46 F 134,46 F 134,46 F 175,36 F 175,36 F 175,36 F 190,60 F 190,60 F 190,60 F 221,80 F 221,80 F 221,80 F 221,80 F 277,27 F 277,27 F 277,27 F 277,27 F 277,27 F 363,92 F 363,92 F 363,92 F 363,92 F 363,92 F 363,92 F 429,77 F 429,77 F 429,77 F 429,77 F 429,77 F 429,77 F 471,38 F 471,38 F 471,38 F 540,71 F 540,71 F 589,23 F 589,23 F 589,23 F 630,82 F 630,82 F 716,79 F 716,79 F On request Part number YG4-31 YG4-32 YG4-33 YG4-34 YG4-35 YG4-36 YG4-37 YG4-38 YG4-39 YG4-40 YG4-41 YG4-42 YG4-43 YG4-44 YG4-45 YG4-46 YG4-47 YG4-48 YG4-49 YG4-50 YG4-51 YG4-52 YG4-53 YG4-54 YG4-55 YG4-56 YG4-57 YG4-58 YG4-59 YG4-60 YG4-61 YG4-62 YG4-63 YG4-64 YG4-65 YG4-66 YG4-67 YG4-68 YG4-69 YG4-70 YG4-71 YG4-72 On request Volume 4 2013 4 293 Plastic spur gear Machined Delrin Module 4.0 - - - - ZG ZPG (optional) ØM  achined parts M Precision class 9 Pressure angle 20° Working temp. -50°C to +80°C ØA H8 Torque indication For 50 teeth at 1000 rpm Delrin 55 Nm ØP ØD 40 20 40 60 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Dimensions in mm PCD ØP 40,00 44,00 48,00 48,00 52,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 294 4 Volume  4 2013 Outside ØD 48,00 52,00 56,00 56,00 60,00 64,00 68,00 72,00 76,00 80,00 84,00 88,00 92,00 96,00 100,00 104,00 108,00 112,00 116,00 120,00 124,00 128,00 HPC Boss ØM 30 34 38 38 38 40 40 50 50 50 50 50 50 50 50 50 80 80 80 80 80 80 Bore ØA 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 Price each 1 to 5 ZG ZPG 19,28 F 19,28 F 19,28 F 19,28 F 20,84 F 22,30 F 25,34 F 28,11 F 29,66 F 31,07 F 32,30 F 33,30 F 35,07 F 36,93 F 38,06 F 44,97 F 44,97 F 44,97 F 55,36 F 55,36 F 46,65 F 55,36 F On request Part number ZG4-9 ZG4-10 ZG4-11 ZG4-12 ZG4-13 ZG4-14 ZG4-15 ZG4-16 ZG4-17 ZG4-18 ZG4-19 ZG4-20 ZG4-21 ZG4-22 ZG4-23 ZG4-24 ZG4-25 ZG4-26 ZG4-27 ZG4-28 ZG4-29 ZG4-30 www.hpceurope.com - +33(0)4 37 496 496 ZG4-145 Teeth Z 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 145 Dimensions in mm PCD ØP 124,00 128,00 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 Outside ØD 132,00 136,00 140,00 144,00 148,00 152,00 156,00 160,00 164,00 168,00 172,00 176,00 180,00 184,00 188,00 192,00 196,00 200,00 204,00 208,00 212,00 216,00 220,00 224,00 228,00 232,00 236,00 240,00 244,00 248,00 252,00 256,00 260,00 264,00 268,00 272,00 276,00 280,00 284,00 288,00 292,00 296,00 Boss ØM 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 120 120 120 120 120 120 120 120 120 120 120 120 120 120 150 150 150 150 150 150 150 150 580,00 588,00 Dimensions: contact us Gears available up to this size +33(0)4 37 490 055 - cial2@hpceurope.com HPC Bore ØA 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 38 Price each 1 to 5 ZG ZPG 65,73 F 103,32 F 110,70 F 118,28 F 128,29 F 135,80 F 144,02 F 146,22 F 154,41 F 159,53 F 165,57 F 180,60 F 183,69 F 186,80 F 189,83 F 192,02 F 194,22 F 397,38 F 425,75 F 435,01 F 445,68 F 455,82 F 468,93 F 488,32 F 530,19 F 561,44 F 574,39 F 581,84 F 605,60 F 620,92 F 710,55 F 710,55 F 710,55 F 710,55 F 710,55 F 710,55 F 845,64 F 845,64 F 845,64 F 845,64 F 845,64 F 845,64 F On request Part number ZG4-31 ZG4-32 ZG4-33 ZG4-34 ZG4-35 ZG4-36 ZG4-37 ZG4-38 ZG4-39 ZG4-40 ZG4-41 ZG4-42 ZG4-43 ZG4-44 ZG4-45 ZG4-46 ZG4-47 ZG4-48 ZG4-49 ZG4-50 ZG4-51 ZG4-52 ZG4-53 ZG4-54 ZG4-55 ZG4-56 ZG4-57 ZG4-58 ZG4-59 ZG4-60 ZG4-61 ZG4-62 ZG4-63 ZG4-64 ZG4-65 ZG4-66 ZG4-67 ZG4-68 ZG4-69 ZG4-70 ZG4-71 ZG4-72 On request Volume 4 2013 4 295 Steel spur gear Module 5.0 Steel 34C10 HG HPG (optional) ØM ØA H8 - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØP .Option. - Alternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format 45 25 Part number HG5-12 HG5-14 HG5-15 HG5-18 HG5-19 HG5-20 HG5-21 HG5-22 HG5-23 HG5-24 HG5-25 HG5-30 HG5-35 HG5-38 HG5-40 HG5-42 HG5-45 HG5-50 HG5-52 HG5-55 Teeth Z 12 14 15 18 19 20 21 22 23 24 25 30 35 38 40 42 45 50 52 55 HG5-115 115 Dimensions in mm 80 8.30 DISCOUNTS 120 12.60 PCD ØP 60,00 70,00 75,00 90,00 95,00 100,00 105,00 110,00 115,00 120,00 125,00 150,00 175,00 190,00 200,00 210,00 225,00 250,00 260,00 275,00 Outside ØD 70,00 80,00 85,00 100,00 105,00 110,00 115,00 120,00 125,00 130,00 135,00 160,00 185,00 200,00 210,00 220,00 235,00 260,00 270,00 285,00 575,00 585,00 Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Boss ØM 40 50 50 70 70 80 80 80 85 85 85 100 100 100 150 150 150 150 150 150 Gears available up to this size 296 4 Volume  4 2013 HPC Bore ØA 20 25 25 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 Dimensions: contact us 1 to 3 Price each HG HPG on request 68,03 F on request 82,18 F on request 136,57 F on request on request 101,86 F on request 112,36 F 170,31 F 214,87 F on request on request on request on request on request on request on request On request 1570 165 45 70 Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass Nm 294 kW 30.80 ØD on request www.hpceurope.com - +33(0)4 37 496 496 Plastic spur gear Machined Delrin Module ZHG 5.0 ZHPG (optional) ØM ØA H8 - Machined parts - Precision class 9 - Pressure angle 20° - Working temp. -50°C to +80°C .Option. - Different number of teeth: a datasheet is available in PDF on www.hpceurope.com ØP ØD 45 25 45 70 Torque indication For 50 teeth 1000 rpm Delrin 90 Nm ZHG5-115 Teeth Z 12 14 15 18 19 20 21 22 23 24 25 30 35 38 40 42 45 50 52 55 115 Dimensions in mm Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request PCD ØP 60,00 70,00 75,00 90,00 95,00 100,00 105,00 110,00 115,00 120,00 125,00 150,00 175,00 190,00 200,00 210,00 225,00 250,00 260,00 275,00 Outside ØD 70,00 80,00 85,00 100,00 105,00 110,00 115,00 120,00 125,00 130,00 135,00 160,00 185,00 200,00 210,00 220,00 235,00 260,00 270,00 285,00 575,00 585,00 Boss ØM 40 50 50 70 70 80 80 80 85 85 85 100 100 100 150 150 150 150 150 150 Gears available up to this size Bore ØA 20 25 25 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 3 ZHG ZHPG on request on request on request 82,47 F on request 91,35 F on request on request 101,40 F on request 112,69 F 170,80 F 215,57 F on request on request on request on request on request on request on request On request Part number ZHG5-12 ZHG5-14 ZHG5-15 ZHG5-18 ZHG5-19 ZHG5-20 ZHG5-21 ZHG5-22 ZHG5-23 ZHG5-24 ZHG5-25 ZHG5-30 ZHG5-35 ZHG5-38 ZHG5-40 ZHG5-42 ZHG5-45 ZHG5-50 ZHG5-52 ZHG5-55 discounts on request Volume 4 2013 4 297 Steel spur gear Module Steel 34C10 6.0 HG HPG (optional) ØM - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØA H8 .Option. - A  lternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format 441 46 2350 246 Part number HG6-12 HG6-14 HG6-15 HG6-18 HG6-19 HG6-20 HG6-21 HG6-22 HG6-23 HG6-24 HG6-25 HG6-30 HG6-31 HG6-32 HG6-35 HG6-38 HG6-40 HG6-41 HG6-42 HG6-44 Teeth Z 12 14 15 18 19 20 21 22 23 24 25 30 31 32 35 38 40 41 42 44 HG6-95 95 Dimensions in mm 50 20 ØD 50 70 120 180 12.60 18.80 DISCOUNTS Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request PCD ØP 72,00 84,00 90,00 108,00 114,00 120,00 126,00 132,00 138,00 144,00 150,00 180,00 186,00 192,00 210,00 228,00 240,00 246,00 252,00 264,00 Outside ØD 84,00 96,00 102,00 120,00 126,00 132,00 138,00 144,00 150,00 156,00 162,00 192,00 198,00 204,00 222,00 240,00 252,00 258,00 264,00 276,00 570,00 582,00 Boss ØM 50 60 65 80 80 90 90 90 90 90 90 100 100 120 120 120 150 150 150 150 Gears available up to this size 298 4 Volume  4 2013 HPC Bore ØA 25 25 25 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 Dimensions: contact us 1 to 3 Price each HG HPG on request 74,88 F 80,23 F 96,27 F 101,63 F 106,97 F on request on request 123,02 F on request 133,72 F 191,86 F on request on request 276,74 F on request 316,28 F on request on request on request On request Nm kW Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass ØP on request www.hpceurope.com - +33(0)4 37 496 496 Plastic spur gear Machined Delrin Module - Machined parts - Precision class 9 - Pressure angle 20° - Working temp. -50°C to +80°C ZHG 6.0 ZHPG (optional) ØM .Option. ØA H8 - Different number of teeth: a datasheet is available in PDF on www.hpceurope.com ØP Torque indication For 50 teeth 1000 rpm Delrin 140 Nm ØD 50 20 50 70 discounts Qty. 1+ 4+ 9+ 16+ Disc. List -5% -10% On request Teeth Z 12 14 15 18 19 20 21 22 23 24 25 30 31 32 35 38 40 41 42 44 ZHG6-95 95 Dimensions in mm PCD ØP 72,00 84,00 90,00 108,00 114,00 120,00 126,00 132,00 138,00 144,00 150,00 180,00 186,00 192,00 210,00 228,00 240,00 246,00 252,00 264,00 Outside ØD 84,00 96,00 102,00 120,00 126,00 132,00 138,00 144,00 150,00 156,00 162,00 192,00 198,00 204,00 222,00 240,00 252,00 258,00 264,00 276,00 570,00 582,00 Boss ØM 50 60 65 80 80 90 90 90 90 90 90 100 100 120 120 120 150 150 150 150 Gears available up to this size Bore ØA 25 25 25 30 30 30 30 30 30 30 30 30 30 38 38 38 38 38 38 38 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 3 ZHG ZHPG on request on request on request 86,64 F on request 96,27 F on request on request 110,72 F on request 120,34 F 172,67 F on request on request 268,60 F on request on request on request on request on request On request Part number ZHG6-12 ZHG6-14 ZHG6-15 ZHG6-18 ZHG6-19 ZHG6-20 ZHG6-21 ZHG6-22 ZHG6-23 ZHG6-24 ZHG6-25 ZHG6-30 ZHG6-31 ZHG6-32 ZHG6-35 ZHG6-38 ZHG6-40 ZHG6-41 ZHG6-42 ZHG6-44 on request Volume 4 2013 4 299 Steel spur gear Module 8.0 Steel 34C10 HG HPG (optional) ØM ØA H8 - Precision class 9 - Pressure angle 20° - Linear speed 300m/min ØP .Option. - A  lternative number of teeth, a datasheet is available from www. hpceurope.com in PDF format 60 20 ØD 60 80 Part number 5360 560 HG8-12 HG8-14 HG8-15 HG8-16 HG8-18 HG8-19 HG8-20 HG8-21 HG8-22 HG8-23 HG8-24 HG8-25 HG8-30 HG8-35 HG8-40 Teeth Z 12 14 15 16 18 19 20 21 22 23 24 25 30 35 40 HG8-70 70 Dimensions in mm 460 48 364 38 PCD ØP 96,00 112,00 120,00 128,00 144,00 152,00 160,00 168,00 176,00 184,00 192,00 200,00 240,00 280,00 320,00 Outside ØD 112,00 128,00 136,00 144,00 160,00 168,00 176,00 184,00 192,00 200,00 208,00 216,00 256,00 296,00 336,00 560,00 576,00 Boss ØM 50 50 50 75 75 75 75 75 75 100 100 100 100 100 100 Gears available up to this size 300 4 Volume  4 2013 HPC Bore ØA 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 Dimensions: contact us 1 to 3 Price each HG HPG On request 918 96 On request Nm kW Torque and power indication For 50 teeth at 1000 rpm 34C10 34C10 fibre Z10CNF18.09 hardened brass www.hpceurope.com - +33(0)4 37 496 496 Plastic spur gear Machined Delrin Module - Machined parts - Precision class 9 - Pressure angle 20° - Working temp. -50°C to +80°C .Option. - Different number of teeth: a datasheet is available in PDF on www.hpceurope.com 8.0 ZHG ZHPG (optional) ØM Torque indication For 50 teeth 1000 rpm Delrin 179 Nm ØA H8 ØP ØD 60 20 60 80 PCD ØP 96,00 112,00 120,00 128,00 144,00 160,00 168,00 176,00 184,00 192,00 200,00 240,00 280,00 320,00 Outside ØD 112,00 128,00 136,00 144,00 160,00 176,00 184,00 192,00 200,00 208,00 216,00 256,00 296,00 336,00 ZHG8-70 70 560,00 576,00 Dimensions in mm Boss ØM 50 50 50 75 75 75 75 75 100 100 100 100 100 100 Bore ØA 25 25 25 25 25 25 30 30 30 30 30 30 30 30 Gears available up to this size Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 3 ZHG ZHPG On request Teeth Z 12 14 15 16 18 20 21 22 23 24 25 30 35 40 On request Part number ZHG8-12 ZHG8-14 ZHG8-15 ZHG8-16 ZHG8-18 ZHG8-20 ZHG8-21 ZHG8-22 ZHG8-23 ZHG8-24 ZHG8-25 ZHG8-30 ZHG8-35 ZHG8-40 Volume 4 2013 4 301 is x a el ears l l ra g 4 Pa lical -p.31 he .304 p Parallel axis helical gears p.304 Parallel axis helical gear Steel Module 0.4 0.28 0.03 1.12 0.12 ØP 5 5 10 Important: a right handed gear only meshes with a left handed gear. Z Part number Teeth SH0.4-10/RH 10 SH0.4-15/RH 15 SH0.4-20/RH 20 SH0.4-25/RH 25 SH0.4-30/RH 30 SH0.4-35/RH 35 SH0.4-40/RH 40 SH0.4-45/RH 45 SH0.4-50/RH 50 SH0.4-55/RH 55 SH0.4-60/RH 60 SH0.4-65/RH 65 SH0.4-70/RH 70 SH0.4-75/RH 75 SH0.4-80/RH 80 SH0.4-86/RH 86 SH0.4-90/RH 90 SH0.4-100/RH 100 SH0.4-120/RH 120 SH0.4-140/RH 140 SH0.4-150/RH 150 SH0.4-180/RH 180 SH0.4-200/RH 200 SH0.4-220/RH 220 SH0.4-250/RH 250 Dimensions in mm ØA H8 Helix angle 17°45’ (LH) .Info.. ØM 0.14 0.01 - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 SH0.4-330 PSH SH 330 ØP PCD 4,62 6,30 8,40 10,50 12,60 14,70 16,80 18,90 21,00 23,10 25,20 27,30 29,40 31,50 33,60 36,12 37,80 42,00 50,40 58,80 63,00 75,60 84,00 92,40 105,00 (RH) Helix angle17°45’ DISCOUNTS ØD Outside 5,42 7,10 9,20 11,30 13,40 15,50 17,60 19,70 21,80 23,90 26,00 28,10 30,20 32,30 34,40 36,92 38,60 42,80 51,20 59,60 63,80 76,40 84,80 93,20 105,80 ØA Bore 2 2 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 6 8 8 10 ØM Boss 5,42 7,10 8,00 8,00 8,00 8,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 15,00 15,00 15,00 20,00 Gears available up to this size 304 4 Volume  4 2013 Dimensions: contact us HPC ØD 5 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request Price each 1 to 5 SH PSH 15,37 F 15,49 F 15,49 F 15,46 F 15,65 F 16,05 F 16,43 F 17,02 F 17,54 F 18,04 F 18,83 F 19,75 F on request 20,27 F 20,62 F 21,38 F 22,17 F 22,98 F 23,29 F 25,36 F 26,15 F 36,86 F 41,39 F on request 54,15 F On request Nm kW TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 brass Z10CNF18.09 hardened On request www.hpceurope.com - +33(0)4 37 496 496 Parallel axis helical gear Steel or machined plastic Module Nm kW 0.5 ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin 0.53 0.05 2.09 0.22 0.26 0.03 Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Z ØP Teeth PCD 10 5,78 15 7,88 20 10,50 25 13,13 30 15,75 35 18,38 40 21,00 45 23,63 50 26,25 55 28,88 60 31,50 65 34,13 70 36,75 75 39,38 80 42,00 86 45,15 90 47,25 100 52,50 120 63,00 140 73,50 150 78,75 180 94,50 200 105,00 220 115,50 250 131,25 6 6 12 ØD Outside 6,78 8,88 11,50 14,13 16,75 19,38 22,00 24,63 27,25 29,88 32,50 35,13 37,75 40,38 43,00 46,15 48,25 53,50 64,00 74,50 79,75 95,50 106,00 116,50 132,25 ØM Boss SH ZSH 6,78 - 8,50 7 8,50 9 10,00 10 10,00 12 10,00 12 10,00 12 10,00 12 12,00 12 12,00 14 12,00 14 12,00 14 12,00 14 12,00 14 12,00 16 12,00 16 12,00 16 12,00 16 12,00 16 12,00 16 15,00 16 15,00 16 20,00 - 20,00 - 25,00 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØA Bore SH ZSH 3 - 4 2 4 3 4 3 5 4 5 4 5 4 5 4 6 4 6 4 6 4 6 4 6 4 6 4 6 5 6 5 6 5 6 5 6 6 6 6 8 8 8 8 10 - 10 - 12 - Gears available up to this size SH0.5-264 ZSH0.5-264 264 Dimensions in mm ØD (RH) Helix angle17°45’ Important: a right handed gear only meshes with a left handed gear. ØP STEEL DISCOUNTS .Info.. Part number STEEL PLASTIC SH0.5-10 - SH0.5-15 ZSH0.5-15H SH0.5-20H ZSH0.5-20H SH0.5-25 ZSH0.5-25H SH0.5-30 ZSH0.5-30 SH0.5-35 ZSH0.5-35 SH0.5-40 ZSH0.5-40 SH0.5-45 ZSH0.5-45 SH0.5-50 ZSH0.5-50H SH0.5-55 ZSH0.5-55 SH0.5-60 ZSH0.5-60 SH0.5-65 ZSH0.5-65 SH0.5-70 ZSH0.5-70 SH0.5-75 ZSH0.5-75 SH0.5-80 ZSH0.5-80 SH0.5-86 ZSH0.5-86 SH0.5-90 ZSH0.5-90 SH0.5-100 ZSH0.5-100 SH0.5-120 ZSH0.5-120 SH0.5-140 ZSH0.5-140 SH0.5-150 ZSH0.5-150 SH0.5-180 ZSH0.5-180 SH0.5-200 - SH0.5-220 - SH0.5-250 - ØA H8 0.13 - Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 SH ZSH - 16,05 F 16,65 F 8,35 F 17,61 F 8,79 F 18,75 F 9,35 F 19,56 F 9,82 F 20,70 F 10,37 F 21,79 F 10,52 F 22,93 F 11,14 F 24,02 F 11,68 F 24,88 F 12,25 F 25,74 F 13,94 F 26,56 F 14,35 F 26,97 F 14,51 F 27,51 F 14,86 F 28,10 F 15,12 F 28,70 F 17,56 F 29,19 F 17,82 F 29,64 F 18,17 F 35,82 F 18,37 F 42,85 F 18,54 F 47,30 F 18,57 F 52,65 F 27,07 F - 57,49 F - 62,70 F - 68,99 F On request On request Volume 4 2013 4 305 Parallel axis helical gear Steel or machined plastic Module 0.7 Nm kW TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin 1.73 0.18 6.83 0.72 0.86 0.09 0.4 - Important: a right handed gear only meshes with a left handed gear. Part number STEEL PLASTIC SH0.7-10 - SH0.7-11 - SH0.7-15 ZSH0.7-15 SH0.7-20 ZSH0.7-20 SH0.7-22 ZSH0.7-22 SH0.7-25 ZSH0.7-25 SH0.7-30 ZSH0.7-30 SH0.7-34 ZSH0.7-34 SH0.7-35 ZSH0.7-35 SH0.7-40 ZSH0.7-40 SH0.7-45 ZSH0.7-45 SH0.7-50 ZSH0.7-50 SH0.7-51 ZSH0.7-51 SH0.7-55 ZSH0.7-55 SH0.7-60 ZSH0.7-60 SH0.7-70 ZSH0.7-70 SH0.7-75 ZSH0.7-75 SH0.7-80 ZSH0.7-80 SH0.7-90 ZSH0.7-90 SH0.7-100 ZSH0.7-100 SH0.7-120 ZSH0.7-120 SH0.7-140 - SH0.7-150 - SH0.7-175 - ØD (RH) Helix angle17°45’ .Info.. ØP ØD PCD Outside 7,35 8,75 8,09 9,49 11,03 12,43 14,70 16,10 16,17 17,57 18,38 19,78 22,05 23,45 24,99 26,39 25,73 27,13 29,40 30,80 33,08 34,48 36,75 38,15 37,49 38,89 40,43 41,83 44,10 45,50 51,45 52,85 55,13 56,63 58,80 60,20 66,15 67,55 73,50 74,90 88,20 89,60 102,63 104,30 110,25 111,65 128,63 130,03 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts ØM Boss ØA Bore SH ZSH SH ZSH 8,75 - 4 - 9,49 - 5 - 11,90 12,43 5 3 12,00 12,00 5 3 12,00 12,00 5 3 12,00 14,00 5 4 12,00 14,00 5 4 16,00 14,00 6 4 16,00 14,00 6 4 16,00 16,00 6 5 16,00 16,00 6 5 16,00 16,00 6 5 16,00 16,00 6 5 16,00 16,00 6 5 16,00 16,00 6 5 16,00 18,00 8 6 16,00 18,00 8 6 16,00 18,00 8 6 16,00 18,00 8 6 16,00 18,00 8 6 20,00 18,00 8 8 20,00 - 10 - 25,00 - 10 - 30,00 - 15 - Gears available up to this size SH0.7-188 ZSH0.7-188 188 Dimensions in mm 306 4 Volume  4 2013 Dimensions: contact us HPC 10 6 (8*) (7*) 16 (15*) STEEL DISCOUNTS Qty. 1+ Disc. List Z Teeth 10 11 15 20 22 25 30 34 35 40 45 50 51 55 60 70 75 80 90 100 120 140 150 175 ØA H8 ØP Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic ØM *plastic gear (ZSH) dimensions 6+ -22% 30+ On request Price each 1 to 5 SH ZSH - 18,04 F - 18,04 F 19,27 F 9,66 F 21,29 F 10,64 F 21,69 F 10,90 F 22,35 F 11,25 F 23,18 F 11,62 F 23,49 F 11,80 F 23,53 F 11,80 F 23,78 F 13,14 F 24,02 F 13,30 F 24,56 F 13,61 F 24,66 F 13,61 F 25,11 F 15,79 F 25,71 F 16,15 F 26,76 F 20,18 F 27,33 F 20,67 F 28,50 F 24,43 F 30,11 F 25,79 F 38,29 F 32,82 F 52,27 F 47,46 F - 59,56 F - 64,58 F - 74,43 F On request On request www.hpceurope.com - +33(0)4 37 496 496 Parallel axis helical gear Steel or machined plastic Module Nm kW 2.25 0.24 8.92 0.93 1.13 0.12 0.5 - Important: a right handed gear only meshes with a left handed gear. Part number STEEL PLASTIC SH0.8-10 - SH0.8-15 ZSH0.8-15 SH0.8-16 ZSH0.8-16 SH0.8-19 ZSH0.8-19 SH0.8-20 ZSH0.8-20 SH0.8-25 ZSH0.8-25 SH0.8-28 ZSH0.8-28 SH0.8-30 ZSH0.8-30 SH0.8-35 ZSH0.8-35 SH0.8-40 ZSH0.8-40 SH0.8-45 ZSH0.8-45 SH0.8-50 ZSH0.8-50 SH0.8-55 ZSH0.8-55 SH0.8-60 ZSH0.8-60 SH0.8-66 ZSH0.8-66 SH0.8-70 ZSH0.8-70 SH0.8-75 ZSH0.8-75 SH0.8-80 ZSH0.8-80 SH0.8-90 ZSH0.8-90 SH0.8-100 ZSH0.8-100 SH0.8-120 ZSH0.8-120 SH0.8-140 ZSH0.8-140 SH0.8-150 - SH0.8-164 ZSH0.8-164 Dimensions in mm ØD (RH) Helix angle17°45’ .Info.. ØM ØA H8 ØP Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic 0.8 *plastic gear (ZSH) dimensions TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin 10 6 (10*) (8*) 16 (18*) STEEL DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List Z Teeth 10 15 16 19 20 25 28 30 35 40 45 50 55 60 66 70 75 80 90 100 120 140 150 ØP PCD 8,40 12,60 13,44 15,96 16,80 21,00 23,52 25,20 29,40 33,60 37,80 42,00 46,20 50,40 55,44 58,80 63,00 67,20 75,60 84,00 100,80 117,60 126,00 ØD Outside 10,00 14,20 15,04 17,56 18,40 22,60 25,12 26,80 31,00 35,20 39,40 43,60 47,80 52,00 57,04 60,40 64,60 68,80 77,20 85,60 102,40 119,20 127,60 ØM Boss ØA Bore SH ZSH SH ZSH 10 - 5 - 12 14,20 5 3 12 15,04 5 3 12 14,00 5 4 12 14,00 5 4 12 14,00 5 4 12 14,00 5 4 16 16,00 6 5 16 16,00 6 5 16 16,00 6 5 16 16,00 6 5 16 16,00 6 5 16 18,00 6 6 16 18,00 8 6 16 18,00 8 6 16 18,00 8 6 16 18,00 8 6 16 18,00 8 6 20 22,00 8 6 20 22,00 8 8 20 30,00 10 10 20 30,00 10 10 30 - 12 - Gears available up to this size 164 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 SH ZSH - 18,04 F 19,27 F 9,66 F 19,77 F 9,88 F 21,02 F 10,52 F 21,29 F 10,64 F 22,35 F 11,25 F 22,93 F 11,49 F 23,18 F 11,62 F 23,53 F 12,99 F 23,78 F 13,14 F 24,02 F 13,30 F 24,40 F 15,33 F 25,02 F 15,75 F 25,44 F 19,23 F 26,07 F 19,64 F 26,30 F 22,53 F 26,76 F 22,93 F 28,10 F 24,06 F 29,64 F 26,86 F 32,98 F 29,96 F 43,54 F 48,34 F 57,02 F 60,58 F - 65,91 F On request On request Volume 4 2013 4 307 Parallel axis helical gear Steel or machined plastic Module 1.0 Nm kW ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 brass delrin Z10CNF18.09 hardened 4.23 0.44 16.74 1.75 2.12 0.22 ØA H8 1.0 - Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Dimensions in mm 12 8 20 STEEL DISCOUNTS Important: a right handed gear only meshes with a left handed gear. SH1-550 ZSH1-550 ØD (RH) Helix angle17°45’ .Info.. Part number STEEL PLASTIC SH1-10 - SH1-12 ZSH1-12 SH1-15 ZSH1-15 SH1-16 ZSH1-16 SH1-20 ZSH1-20 SH1-25 ZSH1-25 SH1-28 ZSH1-28 SH1-29 ZSH1-29 SH1-30 ZSH1-30 SH1-33 ZSH1-33 SH1-35 ZSH1-35 SH1-40 ZSH1-40 SH1-45 ZSH1-45 SH1-50 ZSH1-50 SH1-55 ZSH1-55 SH1-60 ZSH1-60 SH1-65 ZSH1-65 SH1-66 ZSH1-66 SH1-70 ZSH1-70 SH1-80 ZSH1-80 SH1-90 ZSH1-90 SH1-100 ZSH1-100 SH1-120 ZSH1-120 SH1-130 - ØP 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List Z ØP Teeth PCD 10 10,50 12 12,60 15 15,75 16 16,80 20 21,00 25 26,25 28 29,40 29 30,45 30 31,50 33 34,65 35 36,75 40 42,00 45 47,25 50 52,50 55 57,75 60 63,00 65 68,25 66 69,30 70 73,50 80 84,00 90 94,50 100 105,00 120 126,00 130 136,50 ØD Outside 12,50 14,60 17,75 18,80 23,00 28,25 31,40 32,45 33,50 36,65 38,75 44,00 49,25 54,50 59,75 65,00 70,25 71,30 75,50 86,00 96,50 107,00 128,00 138,50 ØM Boss ØA Bore SH ZSH SH ZSH 12 - 6 - 12 14 6 4 12 15 6 6 15 15 8 6 15 15 8 6 15 18 8 6 15 18 8 6 15 18 8 6 20 18 8 6 20 18 8 6 20 18 8 6 20 18 8 6 20 18 8 6 30 22 10 8 30 22 10 8 30 22 10 8 30 22 10 8 30 22 10 8 30 22 10 8 30 26 10 8 30 26 10 8 30 26 10 10 40 30 12 12 40 - 12 - Gears available up to this size 550 308 4 Volume  4 2013 Dimensions: contact us HPC 6+ -22% 30+ On request Price each 1 to 5 SH ZSH - 16,05 F 16,05 F 8,04 F 16,92 F 8,41 F 17,20 F 8,58 F 18,75 F 9,35 F 20,05 F 10,05 F 21,74 F 12,01 F 22,30 F 12,30 F 22,72 F 12,54 F 23,53 F 12,99 F 24,02 F 13,30 F 25,96 F 16,35 F 26,45 F 16,67 F 29,45 F 18,54 F 31,62 F 19,95 F 33,37 F 25,26 F 36,95 F 27,94 F 37,72 F 28,50 F 39,55 F 33,89 F 44,70 F 34,39 F 47,76 F 48,17 F 53,59 F 71,70 F 75,85 F 100,24 F - 81,40 F On request On request www.hpceurope.com - +33(0)4 37 496 496 Parallel axis helical gear Steel or machined plastic Module Nm kW 1.25 TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin 6.61 0.69 43.45 4.55 3.31 0.34 ØM ØA H8 1.5 - Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic ØD (RH) Helix angle17°45’ Important: a right handed gear only meshes with a left handed gear. Part number Z ØP ØD STEEL PLASTIC Teeth PCD Outside SH1.25-10 - 10 13,13 15,63 SH1.25-15 ZSH1.25-15 15 19,69 22,19 SH1.25-18 ZSH1.25-18 18 23,63 26,13 SH1.25-20 ZSH1.25-20 20 26,25 28,75 SH1.25-21 ZSH1.25-21 21 27,56 30,06 SH1.25-25 ZSH1.25-25 25 32,81 35,31 SH1.25-30 ZSH1.25-30 30 39,38 41,88 SH1.25-35 ZSH1.25-35 35 45,94 48,44 SH1.25-37 ZSH1.25-37 37 45,56 51,06 SH1.25-40 ZSH1.25-40 40 52,50 55,00 SH1.25-45 ZSH1.25-45 45 59,06 61,56 SH1.25-50 ZSH1.25-50 50 65,63 68,13 SH1.25-55 ZSH1.25-55 55 72,19 74,69 SH1.25-60 ZSH1.25-60 60 78,75 81,25 SH1.25-65 ZSH1.25-65 65 85,31 87,81 SH1.25-70 ZSH1.25-70 70 91,88 94,38 SH1.25-76 ZSH1.25-76 76 99,75 102,25 SH1.25-80 ZSH1.25-80 80 105,00 107,50 SH1.25-88 ZSH1.25-88 88 115,50 118,00 SH1.25-90 ZSH1.25-90 90 118,13 120,63 SH1.25-96 ZSH1.25-96 96 126,00 128,50 SH1.25-100 ZSH1.25-100 100 131,25 133,75 SH1.25-120 - 120 157,50 160,00 SH1.25-130 - 130 170,63 173,13 20 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com 6+ -22% 30+ On request ØM Boss ØA Bore Price each 1 to 5 SH ZSH SH ZSH SH ZSH 12 - 6 - 20,70 F - 12 15 6 5 22,52 F 11,32 F 15 16 8 6 24,48 F 12,30 F 15 16 8 6 25,79 F 12,93 F 15 18 8 6 26,13 F 14,42 F 15 18 8 6 27,68 F 15,25 F 25 18 8 6 31,71 F 17,56 F 25 18 8 6 34,92 F 21,95 F 25 18 8 6 35,70 F 26,95 F 30 22 10 8 36,86 F 27,88 F 30 22 10 8 37,64 F 32,26 F 30 22 10 8 39,32 F 33,67 F 30 26 10 10 40,98 F 35,13 F 30 26 10 10 47,36 F 42,98 F 30 26 10 10 50,24 F 45,62 F 30 26 10 10 52,99 F 53,44 F 30 30 10 10 54,77 F 60,71 F 30 30 10 10 60,51 F 67,23 F 30 30 10 10 67,03 F 74,38 F 40 30 12 12 67,64 F 82,01 F 30 30 10 12 77,75 F 93,69 F 40 30 12 12 79,03 F 107,57 F 50 - 15 - 93,59 F - 50 - 15 - 104,30 F - Gears available up to this size SH1.25-135 ZSH1.25-135 135 Dimensions in mm 12 8 STEEL DISCOUNTS .Info.. ØP HPC On request On request Volume 4 2013 4 309 Parallel axis helical gear Steel or machined plastic Module 1.5 ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin Nm 12.71 50.29 kW 1.34 5.27 6.36 0.66 3.0 - Dimensions in mm 280 16 9 25 Important: a right handed gear only meshes with a left handed gear. Part number Z STEEL PLASTIC Teeth SH1.5-10 ZSH1.5-10 10 SH1.5-15 ZSH1.5-15 15 SH1.5-16 ZSH1.5-16 16 SH1.5-20 ZSH1.5-20 20 SH1.5-23 ZSH1.5-23 23 SH1.5-25 ZSH1.5-25 25 SH1.5-26 ZSH1.5-26 26 SH1.5-30 ZSH1.5-30 30 SH1.5-31 ZSH1.5-31 31 SH1.5-32 ZSH1.5-32 32 SH1.5-38 ZSH1.5-38 38 SH1.5-40 ZSH1.5-40 40 SH1.5-45 ZSH1.5-45 45 SH1.5-50 ZSH1.5-50 50 SH1.5-56 ZSH1.5-56 56 SH1.5-60 ZSH1.5-60 60 SH1.5-66 ZSH1.5-66 66 SH1.5-70 ZSH1.5-70 70 SH1.5-75 ZSH1.5-75 75 SH1.5-80 ZSH1.5-80 80 SH1.5-90 ZSH1.5-90 90 SH1.5-100 ZSH1.5-100 100 SH1.5-110 - 110 SH1.5-115 - 115 SH1.5-120 - 120 ZSH1.5-280 ØD STEEL DISCOUNTS (RH) Helix angle17°45’ .Info.. ØP Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic SH1.5-280 ØA H8 ØP ØD PCD Outside 15,75 18,75 23,63 26,63 25,20 28,20 31,50 34,50 36,23 39,23 39,38 42,38 40,95 43,95 47,25 50,25 48,83 51,83 50,40 53,40 59,85 62,85 63,00 66,00 70,88 73,88 78,75 81,75 88,20 91,20 94,50 97,50 103,95 106,95 110,25 113,25 118,13 121,13 126,00 129,00 141,75 144,75 157,50 160,50 173,25 176,25 181,13 184,13 189,00 192,00 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List dimensions: contact us HPC 30+ On request ØM Boss ØA Bore Price each 1 to 5 SH ZSH SH ZSH SH ZSH 18 18 8 6 20,75 F 10,42 F 18 20 8 8 21,52 F 10,80 F 20 20 10 8 22,03 F 11,02 F 20 25 10 8 25,41 F 14,04 F 20 25 10 8 26,41 F 15,70 F 25 25 12 8 28,10 F 17,68 F 25 25 12 8 29,43 F 18,75 F 25 25 12 8 32,71 F 20,56 F 25 28 12 10 33,16 F 20,91 F 25 28 12 10 33,85 F 21,36 F 30 28 15 10 38,21 F 29,36 F 40 30 15 12 39,95 F 30,24 F 40 30 15 12 40,78 F 30,83 F 40 30 15 12 48,77 F 41,80 F 40 30 15 12 52,82 F 47,98 F 40 30 15 12 54,15 F 54,60 F 40 40 15 12 59,34 F 59,91 F 40 40 15 12 62,89 F 63,51 F 40 40 15 12 70,78 F 82,88 F 40 40 15 12 77,47 F 91,70 F 40 40 15 12 on request 122,31 F 40 50 15 15 107,44 F 157,04 F 40 - 15 - 123,63 F - 40 - 15 - 137,75 F - 40 - 15 - 153,88 F - Gears available up to this size 310 4 Volume  4 2013 6+ -22% On request On request www.hpceurope.com - +33(0)4 37 496 496 Parallel axis helical gear Steel or machined plastic Module *plastic gear (ZSH) dimensions TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin Nm 33.89 134.0 16.94 kW 3.56 14.0 1.78 8.0 - - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Helix angle 17°45’ (LH) Dimensions in mm ØA H8 ØP 24 11 (18*) (12*) 35 (7*) (8*) (36*) ØD (RH) Helix angle17°45’ Important: a right handed gear only meshes with a left handed gear. SH2-280 ZSH2-280 ØM STEEL DISCOUNTS .Info.. Part number STEEL PLASTIC SH2-10 ZSH2-10 SH2-15 ZSH2-15 SH2-18 ZSH2-18 SH2-20 ZSH2-20 SH2-22 ZSH2-22 SH2-24 ZSH2-24 SH2-25 ZSH2-25 SH2-30 ZSH2-30 SH2-32 ZSH2-32 SH2-35 ZSH2-35 SH2-40 ZSH2-40 SH2-45 ZSH2-45 SH2-48 ZSH2-48 SH2-50 ZSH2-50 SH2-55 ZSH2-55 SH2-56 ZSH2-56 SH2-60 ZSH2-60 SH2-65 ZSH2-65 SH2-70 ZSH2-70 SH2-75 ZSH2-75 SH2-80 - SH2-90 - SH2-100 - SH2-110 - SH2-120 - 2.0 Z Teeth 10 15 18 20 22 24 25 30 32 35 40 45 48 50 55 56 60 65 70 75 80 90 100 110 120 ØP ØD PCD Outside 21,00 25,00 31,50 35,50 37,80 41,80 42,00 46,00 46,20 50,20 50,40 54,40 52,50 56,50 63,00 67,00 67,20 71,20 73,50 77,50 84,00 88,00 94,50 98,50 100,80 104,80 105,00 109,00 115,50 119,50 117,60 121,60 126,00 130,00 136,50 140,50 147,00 151,00 157,50 161,50 168,00 172,00 189,00 193,00 210,00 214,00 231,00 235,00 252,00 256,00 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØM Boss ØA Bore SH ZSH SH ZSH 25 24 12 10 25 25 15 12 30 30 15 12 30 30 15 12 35 30 15 12 35 30 15 12 35 30 15 12 40 30 20 12 40 30 20 12 50 30 20 12 50 35 20 12 50 35 20 15 50 35 20 15 50 35 20 15 50 35 20 15 50 35 20 15 50 35 20 15 50 40 20 15 50 40 20 15 50 50 20 15 50 - 20 - 50 - 20 - 50 - 20 - 50 - 20 - 50 - 20 - Gears available up to this size 280 dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 SH ZSH 26,97 F 13,52 F 31,81 F 17,61 F 35,00 F 19,40 F 36,63 F 23,07 F 38,29 F 24,13 F 39,95 F 30,24 F 42,14 F 31,85 F 48,11 F 41,27 F 52,27 F 44,82 F 57,76 F 52,38 F 65,98 F 59,91 F 71,04 F 71,66 F 76,48 F 84,91 F 81,82 F 90,83 F 95,85 F 106,37 F 97,88 F 118,56 F 104,25 F 126,54 F 114,55 F 150,30 F 121,22 F 159,03 F 149,97 F 227,78 F - 181,63 F - 216,82 F - 269,51 F - 298,72 F - 347,11 F On request On request Volume 4 2013 4 311 Parallel axis helical gear Steel or machined plastic Module 2.5 *plastic gear (ZSH) dimensions TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin Nm 66.17 261.7 kW 6.94 27.4 33.0 3.5 12.0 - STEEL DISCOUNTS Important: a right handed gear only meshes with a left handed gear. 30 10 (20*) (12*) 40 (7*) (8*) (32*) ØD (RH) Helix angle17°45’ .Info.. Part number STEEL PLASTIC SH2.5-10 ZSH2.5-10 SH2.5-15 ZSH2.5-15 SH2.5-20 ZSH2.5-20 SH2.5-22 ZSH2.5-22 SH2.5-25 ZSH2.5-25 SH2.5-26 ZSH2.5-26 SH2.5-30 ZSH2.5-30 SH2.5-35 ZSH2.5-35 SH2.5-36 ZSH2.5-36 SH2.5-40 ZSH2.5-40 SH2.5-45 ZSH2.5-45 SH2.5-46 ZSH2.5-46 SH2.5-50 ZSH2.5-50 SH2.5-53 ZSH2.5-53 SH2.5-55 ZSH2.5-55 SH2.5-57 ZSH2.5-57 SH2.5-60 ZSH2.5-60 SH2.5-65 ZSH2.5-65 SH2.5-70 ZSH2.5-70 SH2.5-75 ZSH2.5-75 SH2.5-80 - SH2.5-90 - SH2.5-100 - SH2.5-110 - ØA H8 ØP Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic ØM 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List Z Teeth 10 15 20 22 25 26 30 35 36 40 45 46 50 53 55 57 60 65 70 75 80 90 100 110 ØP ØD PCD Outside 26,25 31,25 39,38 44,38 52,50 57,50 57,75 62,75 65,63 70,63 68,25 73,25 78,75 83,75 91,88 96,88 94,50 99,50 105,00 110,00 118,13 123,13 120,75 125,75 131,25 136,25 139,13 144,13 144,38 149,38 149,63 154,63 157,50 162,50 170,63 175,63 183,75 188,75 196,88 201,88 210,00 215,00 236,25 241,25 262,50 267,50 288,75 293,75 Dimensions in mm 312 4 Volume  4 2013 Dimensions: contact us HPC 30+ On request ØM Boss ØA Bore Price each 1 to 5 SH ZSH SH ZSH SH ZSH 30 30 12 10 37,12 F 20,71 F 30 30 15 12 42,20 F 25,06 F 40 30 20 12 50,25 F 38,02 F 40 30 20 12 53,31 F 45,64 F 40 30 20 12 59,29 F 50,83 F 45 30 20 12 62,31 F 53,40 F 45 45 20 15 69,72 F 63,35 F 45 45 20 15 78,36 F 79,09 F 45 45 20 17 82,59 F 83,31 F 50 45 20 17 89,52 F 90,30 F 50 45 20 17 96,40 F 106,97 F 50 45 20 17 98,60 F 109,46 F 50 45 20 17 108,96 F 120,92 F 50 45 20 17 112,46 F 136,24 F 50 45 20 17 124,72 F 150,78 F 50 60 20 20 129,24 F 156,46 F 50 60 20 20 135,24 F 201,32 F 50 60 20 20 185,22 F 268,02 F 50 60 20 20 225,53 F 314,72 F 50 60 20 20 284,04 F 595,20 F 50 - 20 - 305,12 F - 50 - 20 - 340,12 F - 50 - 20 - 434,52 F - 50 - 20 - 500,24 F - Gears available up to this size SH2.5-220 ZSH2.5-220 220 6+ -22% On request On request www.hpceurope.com - +33(0)4 37 496 496 Parallel axis helical gear Steel or machined plastic Module *plastic gear (ZSH) dimensions TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened brass delrin Nm 114.2 451.9 57.12 20.00 kW 11.9 47.4 5.98 - Important: a right handed gear only meshes with a left handed gear. Z ØP Teeth PCD 10 31,50 15 47,25 18 56,70 20 63,00 22 69,30 25 78,75 27 85,05 30 94,50 35 110,25 40 126,00 45 141,75 50 157,50 54 170,10 55 173,25 60 189,00 61 192,15 62 195,30 65 204,75 70 220,50 75 236,25 80 252,00 90 283,50 92 289,80 95 299,25 SH3-180 ZSH3-180 180 Dimensions in mm 36 14 (25*) (15*) 50 (7*) (8*) (40*) ØD STEEL DISCOUNTS .Info.. Part number STEEL PLASTIC SH3-10 ZSH3-10 SH3-15 ZSH3-15 SH3-18 ZSH3-18 SH3-20 ZSH3-20 SH3-22 ZSH3-22 SH3-25 ZSH3-25 SH3-27 ZSH3-27 SH3-30 ZSH3-30 SH3-35 ZSH3-35 SH3-40 ZSH3-40 SH3-45 ZSH3-45 SH3-50 ZSH3-50 SH3-54 ZSH3-54 SH3-55 ZSH3-55 SH3-60 ZSH3-60 SH3-61 - SH3-62 - SH3-65 - SH3-70 - SH3-75 - SH3-80 - SH3-90 - SH3-92 - SH3-95 - ØA H8 ØP Helix angle 17°45’ (LH) - Gears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 or delrin plastic 3.0 ØM 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request (RH) Helix angle17°45’ PLASTIC discounts Qty. 1+ Disc. List ØD Outside 37,50 53,25 62,70 69,00 75,30 84,75 91,05 100,50 116,25 132,00 147,75 163,50 176,10 179,25 195,00 198,15 201,30 210,75 226,50 242,25 258,00 289,50 295,80 305,25 ØM Boss SH ZSH 30 36 30 40 40 40 50 40 50 40 50 40 50 50 50 50 60 50 60 50 60 60 60 60 60 70 60 70 60 70 60 - 60 - 60 - 60 - 60 - 60 - 60 - 60 - 60 - Dimensions: contact us HPC 30+ On request ØA Bore Price each 1 to 5 SH ZSH SH ZSH 15 12 45,90 F 25,41 F 20 15 51,06 F 32,11 F 20 15 60,33 F 45,62 F 25 15 64,51 F 55,39 F 25 15 69,05 F 59,23 F 25 15 77,63 F 70,47 F 25 20 83,99 F 76,22 F 25 20 93,12 F 93,93 F 25 20 115,68 F 128,44 F 25 20 127,72 F 154,65 F 25 20 188,71 F 229,12 F 25 20 208,93 F 314,80 F 25 20 238,21 F 361,67 F 25 20 249,53 F 365,79 F 25 20 276,60 F 419,91 F 25 - - 284,12 F 25 - - 291,59 F 25 - - 307,67 F 25 - - 355,88 F 25 - - 395,65 F 25 - - 441,46 F 25 - - 580,99 F 25 - - 599,09 F 25 - - 664,14 F Gears available up to this size +33(0)4 37 490 055 - cial2@hpceurope.com 6+ -22% On request On request Volume 4 2013 4 313 Parallel axis helical gear Steel Module 4.0 338 35 1340 140 169 17 ØA H8 Helix angle 17°45’ (LH) - G  ears are in permanent contact - Reduced noise - Pressure angle 20° - Material: Steel 34C10 Important: a right handed gear only meshes with a left handed gear. SH4-135 Z Teeth 10 12 14 15 18 20 24 25 28 30 34 35 36 40 45 46 50 55 56 60 65 68 70 72 ØP (RH) Helix angle17°45’ .Info.. Part number SH4-10 SH4-12 SH4-14 SH4-15 SH4-18 SH4-20 SH4-24 SH4-25 SH4-28 SH4-30 SH4-34 SH4-35 SH4-36 SH4-40 SH4-45 SH4-46 SH4-50 SH4-55 SH4-56 SH4-60 SH4-65 SH4-68 SH4-70 SH4-72 ØM 48 12 60 ØD 48 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ØP PCD 42,00 50,40 58,80 63,00 75,60 84,00 100,80 105,00 117,60 126,00 142,80 147,00 151,20 168,00 189,00 193,20 210,00 231,00 235,20 252,00 273,00 285,60 294,00 302,40 135 314 4 Volume  4 2013 ØD Outside 50,00 58,40 66,80 71,00 83,60 92,00 108,80 113,00 125,60 134,00 150,80 155,00 159,20 176,00 197,00 201,20 218,00 239,00 243,20 260,00 281,00 293,60 302,00 310,40 ØM Boss 40 40 40 40 50 50 50 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 ØA Bore 20 20 20 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Gears available up to this size Dimensions: contact us HPC Price each 1 to 5 SH PSH 63,04 F 63,04 F 72,81 F 82,59 F 101,39 F 108,96 F 124,98 F 129,92 F 146,55 F 157,30 F 202,87 F 217,95 F 232,93 F 274,69 F 325,47 F 329,23 F 351,78 F 428,73 F 453,96 F 502,03 F 664,69 F 732,92 F 767,83 F 831,39 F On request Nm kW PSH SH TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 brass Z10CNF18.09 hardened On request On request www.hpceurope.com - +33(0)4 37 496 496 xis s a d ear e s s g 3 Cro lical -p.35 he .315 p Crossed axis helical gears p.316 Crossed helical gear crossed axis à 90° Steel Module 0.4 H TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm hardened 34C10 Z10CNF18.09 34C10 Nm 0,056 0,375 PH ØM 0,039 ØA H8 - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 ØP 3 7 10 .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Part number H0.4-10 H0.4-12 H0.4-15 H0.4-16 H0.4-20 H0.4-25 H0.4-26 H0.4-30 H0.4-35 H0.4-36 H0.4-40 H0.4-46 H0.4-50 H0.4-55 H0.4-56 H0.4-60 H0.4-65 H0.4-68 H0.4-70 H0.4-75 H0.4-80 H0.4-86 H0.4-90 H0.4-100 H0.4-120 Z Teeth 10 12 15 16 20 25 26 30 35 36 40 46 50 55 56 60 65 68 70 75 80 86 90 100 120 H0.4-246 246 Dimensions in mm ØP PCD 5,66 6,79 8,49 9,05 11,31 14,14 14,71 16,97 19,80 20,36 22,63 26,02 28,28 31,11 31,68 33,94 36,77 38,47 39,60 42,43 45,25 48,65 50,91 56,57 67,88 RH 45° Helix angle ØD Outside 6,46 7,59 9,29 9,85 12,11 14,94 15,51 17,77 20,60 21,16 23,43 26,82 29,08 31,91 32,48 34,74 37,57 39,27 40,40 43,23 46,05 49,45 51,71 57,37 68,68 ØM Boss 6,46 7,59 9,29 9,85 8,00 8,00 8,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 12,00 Gears available up to this size 316 4 Volume  4 2013 Dimensions: contact us HPC ØD 3 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ØA Bore 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 Price each 1 to 5 H PH 14,80 F 14,80 F 14,57 F 14,62 F 14,90 F 15,30 F 15,37 F 16,00 F 16,74 F 16,86 F 17,52 F 18,98 F 19,20 F 19,45 F 19,45 F 19,95 F 20,95 F 21,29 F 21,74 F 22,76 F 22,93 F 23,78 F 26,88 F 29,29 F 34,21 F On request 0,006 kW on request www.hpceurope.com - +33(0)4 37 496 496 Crossed helical gear crossed axis à 90° Steel or machined plastic Module ØM Nm kW TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 0.127 0.011 0.705 0.074 ØA H8 0.03 - ØD 5 7 (4*) (5*) 12 (9*) STEEL DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. H0.5-196 ZH0.5-196 Dimensions in mm Z Teeth 10 12 14 15 20 25 26 30 35 36 40 46 50 56 60 64 70 75 80 90 100 120 140 150 180 *plastic gear (ZH) dimensions ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Part number STEEL PLASTIC H0.5-10 - H0.5-12 - H0.5-14 ZH0.5-14 H0.5-15 ZH0.5-15 H0.5-20 ZH0.5-20 H0.5-25 ZH0.5-25 H0.5-26 ZH0.5-26 H0.5-30 ZH0.5-30 H0.5-35 ZH0.5-35 H0.5-36 ZH0.5-36 H0.5-40 ZH0.5-40 H0.5-46 ZH0.5-46 H0.5-50 ZH0.5-50 H0.5-56 ZH0.5-56 H0.5-60 ZH0.5-60 H0.5-64 ZH0.5-64 H0.5-70 ZH0.5-70 H0.5-75 ZH0.5-75 H0.5-80 ZH0.5-80 H0.5-90 ZH0.5-90 H0.5-100 ZH0.5-100 H0.5-120 ZH0.5-120 H0.5-140 - H0.5-150 - H0.5-180 - RH 45° Helix angle ØP ØD ØM Boss PCD Outside H ZH 7,07 8,07 8,07 - 8,49 9,49 8,50 - 9,90 10,90 8,50 10 10,61 11,61 8,50 10 14,14 15,14 10,00 10 17,68 18,68 10,00 14 18,38 19,38 10,00 14 21,21 22,21 10,00 14 24,75 25,75 10,00 14 25,46 26,46 10,00 14 28,28 29,28 10,00 14 35,53 33,53 10,00 16 35,36 36,36 12,00 16 39,60 40,60 12,00 16 42,43 43,43 12,00 16 45,25 46,25 12,00 16 49,50 50,50 12,00 16 53,03 54,03 12,00 16 56,57 57,57 12,00 16 63,64 64,64 12,00 18 70,71 71,71 16,00 18 84,85 85,85 20,00 18 98,99 99,99 20,00 - 106,07 107,07 20,00 - 127,26 128,28 20,00 - PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 3 - 3 - 4 3 4 3 5 3 5 4 5 4 5 4 5 4 5 4 5 4 5 4 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 6 6 6 8 8 8 - 10 - 10 - Gears available up to this size 196 0.5 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH - 15,83 F - 16,23 F 16,86 F 8,41 F 17,20 F 8,58 F 18,54 F 9,30 F 19,95 F 9,99 F 20,16 F 10,14 F 21,36 F 10,73 F 22,93 F 11,49 F 23,07 F 11,61 F 24,00 F 12,01 F 25,44 F 14,04 F 26,01 F 14,35 F 26,76 F 16,74 F 27,31 F 17,20 F 28,09 F 17,61 F 28,19 F 21,36 F 34,13 F 25,79 F 34,13 F 25,79 F 40,78 F 34,97 F 45,06 F 40,90 F 50,14 F 45,49 F - 54,77 F - 59,71 F - 66,96 F on request on request Volume 4 2013 4 317 Crossed helical gear crossed axis à 90° Steel Module 0.7 0.272 0.028 ØM 1.791 0.188 ØA H8 - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 ØP 6 .Info.. H0.7-140 Dimensions in mm Z Teeth 9 10 15 16 18 20 25 26 30 35 36 40 46 50 55 56 60 66 70 75 80 90 100 120 140 8 14 Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Part number H0.7-9 H0.7-10 H0.7-15 H0.7-16 H0.7-18 H0.7-20 H0.7-25 H0.7-26 H0.7-30 H0.7-35 H0.7-36 H0.7-40 H0.7-46 H0.7-50 H0.7-55 H0.7-56 H0.7-60 H0.7-66 H0.7-70 H0.7-75 H0.7-80 H0.7-90 H0.7-100 H0.7-120 PH RH 45° Helix angle ØD 6 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ØP PCD 8,91 9,90 14,85 15,84 17,82 19,80 24,75 25,74 29,70 34,65 35,64 39,60 45,54 49,50 54,45 55,44 59,40 65,34 69,30 74,25 79,20 89,10 98,99 118,97 ØD Outside 10,31 11,30 16,25 17,24 19,22 21,20 26,15 27,14 31,10 36,05 37,04 41,00 46,94 50,90 55,85 56,84 60,80 66,74 70,70 75,65 80,60 90,50 100,39 120,19 ØM Boss 10,31 11,30 12,00 12,00 12,00 12,00 12,00 12,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 16,00 20,00 20,00 20,00 20,00 20,00 20,00 ØA Bore 4 4 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 8 10 10 Price each 1 to 5 H PH 17,60 F 18,37 F 20,67 F on request 21,52 F 21,97 F 22,40 F 22,45 F 22,79 F 23,41 F 23,49 F 24,06 F 25,11 F 26,30 F 27,21 F 27,21 F 28,96 F 34,36 F 36,43 F 41,48 F 49,79 F 52,06 F 61,53 F 70,83 F 138,59 139,99 30,00 12 On request Gears available up to this size 318 4 Volume  4 2013 HPC On request Nm kW H TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened www.hpceurope.com - +33(0)4 37 496 496 Crossed helical gear crossed axis à 90° Steel or machined plastic Module Nm kW ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 0.395 0.041 2.596 0.272 ØA H8 0.10 - ØD Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Dimensions in mm 8 6 (6*) 14 (12*) STEEL DISCOUNTS .Info.. H0.8-122 ZH0.8-122 *plastic gear (ZH) dimensions ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Part number STEEL PLASTIC H0.8-9 - H0.8-10 - H0.8-15 ZH0.8-15 H0.8-16 ZH0.8-16 H0.8-20 ZH0.8-20 H0.8-25 ZH0.8-25 H0.8-26 ZH0.8-26 H0.8-30 ZH0.8-30 H0.8-35 ZH0.8-35 H0.8-36 ZH0.8-36 H0.8-40 ZH0.8-40 H0.8-45 ZH0.8-45 H0.8-50 ZH0.8-50 H0.8-56 ZH0.8-56 H0.8-60 ZH0.8-60 H0.8-66 ZH0.8-66 H0.8-70 ZH0.8-70 H0.8-76 ZH0.8-76 H0.8-80 ZH0.8-80 H0.8-86 ZH0.8-86 H0.8-90 ZH0.8-90 H0.8-100 ZH0.8-100 H0.8-112 - H0.8-120 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request RH 45° Helix angle Z ØP ØD Teeth PCD Outside 9 11,31 12,91 10 11,31 12,91 15 16,97 18,57 16 18,10 19,70 20 22,63 24,23 25 28,28 29,88 26 29,42 31,02 30 33,94 35,44 35 39,60 41,20 36 40,73 42,33 40 45,25 46,85 45 50,91 52,51 50 56,57 58,17 56 63,36 64,96 60 67,88 69,48 66 74,67 76,27 70 79,20 80,80 76 75,24 76,64 80 90,51 92,11 86 97,30 98,90 90 101,82 103,42 100 113,14 114,74 112 126,71 128,31 120 135,76 137,36 ØM Boss H ZH 9 - 9 - 12 14 12 14 12 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 18 20 18 20 18 20 18 20 18 20 18 20 20 20 20 30 - 30 - PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 5 - 5 - 5 4 5 4 5 4 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 6 5 8 6 8 6 8 8 8 8 8 8 8 6 10 10 10 10 12 - 12 - Gears available up to this size 122 0.8 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH - 17,60 F - 18,37 F 20,67 F 10,16 F 20,91 F 10,16 F 21,97 F 10,64 F 22,40 F 11,14 F 22,45 F 11,14 F 22,79 F 12,54 F 23,24 F 12,79 F 23,41 F 12,87 F 24,00 F 14,90 F 24,70 F 18,46 F 26,62 F 18,84 F 29,21 F 22,93 F 30,31 F 23,25 F 32,59 F 24,58 F 34,05 F 27,33 F 36,43 F 38,57 F 41,48 F 42,42 F 49,79 F 33,10 F 51,38 F 56,37 F 62,77 F 56,37 F - 79,73 F - 79,73 F On request On request Volume 4 2013 4 319 Crossed helical gear crossed axis à 90° Steel or machined plastic Module 1.0 Nm kW ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 0.747 0.078 4.908 0.518 *plastic gear (ZH) dimensions 0.18 - ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic 12 ØD 8 (6*) 20 (14*) STEEL DISCOUNTS .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Part number STEEL PLASTIC H1-9 ZH1-9 H1-10 ZH1-10 H1-15 ZH1-15 H1-16 ZH1-16 H1-20 ZH1-20 H1-25 ZH1-25 H1-26 ZH1-26 H1-30 ZH1-30 H1-35 ZH1-35 H1-36 ZH1-36 H1-40 ZH1-40 H1-46 ZH1-46 H1-50 ZH1-50 H1-56 ZH1-56 H1-60 ZH1-60 H1-66 ZH1-66 H1-70 ZH1-70 H1-76 ZH1-76 H1-80 ZH1-80 H1-84 ZH1-84 H1-90 ZH1-90 H1-100 ZH1-100 H1-120 - H1-130 - H1-150 - H1-420 ZH1-420 Dimensions in mm Z Teeth 9 10 15 16 20 25 26 30 35 36 40 46 50 56 60 66 70 76 80 84 90 100 120 130 150 RH 45° Helix angle ØP ØD PCD Outside 14,14 16,14 14,14 16,14 21,21 23,21 22,63 24,63 28,28 30,28 35,36 37,36 36,77 38,77 42,43 44,43 49,50 51,50 50,91 52,91 56,57 58,57 65,05 67,05 70,71 72,71 79,20 81,20 84,85 86,85 93,34 95,34 98,99 100,99 107,48 109,45 113,14 115,14 118,79 120,79 127,28 129,28 141,42 143,42 169,71 171,71 183,85 185,85 212,13 214,13 ØM Boss H ZH 11 12 11 12 15 18 15 18 15 18 20 18 20 18 20 18 20 18 20 22 20 22 20 22 25 22 25 22 25 22 25 26 25 26 25 26 25 26 25 26 30 30 30 30 40 - 50 - 50 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 6 4 6 4 6 6 6 6 6 6 8 6 8 6 8 6 8 6 8 8 8 8 8 8 10 8 10 8 10 8 10 8 10 10 10 10 10 10 10 12 12 12 12 12 15 - 20 - 20 - Gears available up to this size 420 320 4 Volume  4 2013 ØA H8 Dimensions: contact us HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH 81,94 F 7,80 F 16,10 F 8,04 F 18,18 F 9,12 F 18,28 F 9,12 F 21,24 F 11,68 F 23,15 F 12,79 F 23,44 F 12,93 F 25,02 F 15,79 F 28,09 F 21,18 F 28,48 F 21,44 F 30,66 F 23,17 F 35,85 F 30,73 F 38,49 F 33,02 F 42,58 F 38,62 F 44,13 F 40,06 F 50,35 F 50,83 F 51,06 F 56,76 F 63,88 F 62,63 F 72,22 F 77,10 F 72,22 F 77,10 F 81,94 F 77,10 F 96,12 F 112,76 F - 110,28 F - 120,93 F - 138,76 F on request on request www.hpceurope.com - +33(0)4 37 496 496 Crossed helical gear crossed axis à 90° Steel or machined plastic Module Nm kW 1.25 TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 1.386 0.145 9.108 0.954 ØM ØA H8 0.4 - - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic ØD 8 12 (10*) (8*) 20 (18*) STEEL DISCOUNTS .Info.. RH 45° Helix angle Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Part number STEEL PLASTIC H1.25-10 ZH1.25-10 H1.25-16 ZH1.25-16 H1.25-17 ZH1.25-17 H1.25-20 ZH1.25-20 H1.25-22 ZH1.25-22 H1.25-25 ZH1.25-25 H1.25-28 ZH1.25-28 H1.25-30 ZH1.25-30 H1.25-32 ZH1.25-32 H1.25-33 ZH1.25-33 H1.25-36 ZH1.25-36 H1.25-40 ZH1.25-40 H1.25-45 ZH1.25-45 H1.25-50 ZH1.25-50 H1.25-56 ZH1.25-56 H1.25-60 ZH1.25-60 H1.25-66 ZH1.25-66 H1.25-70 ZH1.25-70 H1.25-76 - H1.25-80 - H1.25-84 ZH1.25-84 H1.25-90 ZH1.25-90 H1.25-96 - H1.25-100 Dimensions in mm *plastic gear (ZH) dimensions ØP 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List 6+ -22% 30+ On request Z Teeth 10 16 17 20 22 25 28 30 32 33 36 40 45 50 56 60 66 70 76 80 84 90 96 ØP ØD PCD Outside 17,68 20,18 28,28 30,78 30,05 32,55 35,36 37,86 38,89 41,39 44,19 46,69 49,50 52,00 53,03 55,53 56,57 59,07 58,34 60,84 63,64 66,14 70,71 73,21 79,55 82,05 88,39 90,89 98,99 101,49 106,07 108,57 116,67 119,17 123,74 126,24 134,35 136,85 141,42 143,92 148,49 150,99 159,10 161,60 169,71 172,21 ØM Boss H ZH 15 15 20 18 20 18 20 18 20 18 20 18 20 22 20 22 20 22 20 22 20 22 25 26 25 26 25 26 25 26 25 30 25 30 25 30 25 - 25 - 30 30 30 30 30 - ØA Bore H ZH 6 5 8 6 8 6 8 9 8 9 8 9 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 12 10 12 - 12 - 15 15 15 15 15 - Price each 1 to 5 H ZH 21,42 F 10,73 F 25,41 F 14,04 F 26,41 F 14,56 F 29,26 F 16,15 F 31,47 F 19,79 F 33,82 F 27,19 F 35,00 F 26,45 F 35,55 F 26,86 F 35,94 F 27,19 F 36,17 F 31,02 F 37,77 F 32,40 F 42,61 F 36,47 F 47,15 F 42,78 F 50,74 F 51,25 F 57,57 F 64,50 F 63,84 F 71,08 F 77,56 F 91,29 F 80,84 F 92,52 F - 87,89 F - 90,57 F 95,76 F 135,32 F 99,76 F 164,23 F - 107,33 F 100 176,78 30 15 on request Gears available up to this size 179,28 +33(0)4 37 490 055 - cial2@hpceurope.com - HPC - - Volume 4 2013 4 321 Crossed helical gear crossed axis à 90° Steel or machined plastic Module 1.5 Nm kW TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 2.32 0.24 15.28 1.60 ØM *plastic gear (ZH) dimensions 0.7 - - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic ØA H8 ØP 13 ØD 12 (8*) 25 (20*) .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. RH 45° Helix angle STEEL DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List Part number STEEL PLASTIC H1.5-10 ZH1.5-10 H1.5-14 ZH1.5-14 H1.5-15 ZH1.5-15 H1.5-16 ZH1.5-16 H1.5-20 ZH1.5-20 H1.5-22 ZH1.5-22 H1.5-25 ZH1.5-25 H1.5-26 ZH1.5-26 H1.5-28 ZH1.5-28 H1.5-30 ZH1.5-30 H1.5-32 ZH1.5-32 H1.5-35 ZH1.5-35 H1.5-36 ZH1.5-36 H1.5-40 ZH1.5-40 H1.5-46 ZH1.5-46 H1.5-50 ZH1.5-50 H1.5-56 ZH1.5-56 H1.5-60 ZH1.5-60 H1.5-65 ZH1.5-65 H1.5-70 ZH1.5-70 H1.5-80 - H1.5-83 ZH1.5-83 Dimensions in mm Z Teeth 10 14 15 16 20 22 25 26 28 30 32 35 36 40 46 50 56 60 65 70 80 ØP ØD PCD Outside 21,21 24,21 29,70 32,70 31,82 34,82 33,94 36,94 42,43 45,43 46,67 49,67 53,03 56,03 55,15 58,15 59,40 62,40 63,64 66,64 67,88 70,88 74,25 77,25 76,37 79,37 84,85 87,85 97,58 100,58 106,07 109,07 118,79 121,79 127,28 130,28 137,89 140,89 148,49 151,49 169,71 172,71 ØM Boss H ZH 17 20 20 25 20 25 25 25 30 25 30 28 40 28 40 28 40 30 40 30 40 30 40 30 40 36 40 36 40 36 40 48 40 48 40 48 40 48 40 48 40 - 322 4 Volume  4 2013 Dimensions: contact us HPC 30+ On request ØA Bore Price each 1 to 5 H ZH H ZH 8 8 20,44 F 10,24 F 10 8 24,28 F 13,43 F 10 8 25,12 F 13,65 F 12 8 25,79 F 13,94 F 15 8 30,24 F 19,08 F 15 10 32,21 F 20,30 F 15 10 34,86 F 26,31 F 15 10 35,62 F 26,97 F 15 12 37,94 F 28,70 F 15 12 38,04 F 32,61 F 15 12 39,67 F 33,98 F 15 12 46,35 F 39,74 F 15 12 47,76 F 43,31 F 15 12 50,77 F 46,16 F 15 12 56,53 F 62,70 F 15 12 61,53 F 68,30 F 15 12 73,75 F 89,43 F 15 12 83,88 F 95,97 F 15 12 92,77 F 119,09 F 15 15 107,68 F 134,72 F 15 - - 136,39 F Gears available up to this size 83 6+ -22% on request on request www.hpceurope.com - +33(0)4 37 496 496 Crossed helical gear crossed axis à 90° Steel or machined plastic Module Nm kW ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 5.20 0.54 34.18 3.58 ØA H8 1.5 - ØD 20 15 (15*) (10*) 35 (25*) STEEL DISCOUNTS .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. H2-210 ZH2-210 Dimensions in mm Z Teeth 10 15 16 20 25 26 30 35 36 40 45 46 50 55 60 65 70 76 86 90 96 100 110 120 *plastic gear (ZH) dimensions ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Part number STEEL PLASTIC H2-10 ZH2-10 H2-15 ZH2-15 H2-16 ZH2-16 H2-20 ZH2-20 H2-25 ZH2-25 H2-26 ZH2-26 H2-30 ZH2-30 H2-35 ZH2-35 H2-36 ZH2-36 H2-40 ZH2-40 H2-45 ZH2-45 H2-46 ZH2-46 H2-50 ZH2-50 H2-55 ZH2-55 H2-60 ZH2-60 H2-65 ZH2-65 H2-70 ZH2-70 H2-76 - H2-86 - H2-90 - H2-96 - H2-100 - H2-110 - H2-120 - RH 45° Helix angle ØP ØD PCD Outside 28,28 32,28 42,43 46,43 45,25 49,25 56,57 59,57 70,71 74,71 73,54 77,54 84,85 88,85 98,99 102,99 101,82 105,82 113,14 117,14 127,28 131,28 130,11 134,11 141,42 145,42 155,56 159,56 169,71 173,71 183,85 187,85 197,99 201,99 214,96 218,96 243,24 247,24 254,56 258,56 271,53 275,53 282,84 286,84 311,13 315,13 339,41 343,41 ØM Boss H ZH 22 25 30 30 30 30 40 35 50 35 50 45 50 45 50 45 50 45 50 45 50 60 50 60 50 60 50 60 50 60 50 60 50 60 50 - 50 - 50 - 50 - 50 - 50 - 50 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 12 12 15 12 15 12 20 12 20 12 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 - 20 - 20 - 20 - 20 - 20 - 20 - Gears available up to this size 210 2.0 Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH 30,29 F 16,74 F 36,43 F 27,55 F 37,16 F 28,09 F 43,76 F 37,53 F 58,04 F 52,68 F 58,76 F 53,43 F 65,57 F 66,23 F 77,94 F 86,72 F 79,46 F 88,51 F 95,08 F 105,76 F 109,10 F 132,49 F 110,94 F 134,72 F 121,83 F 174,79 F 157,62 F 212,13 F 186,04 F 246,50 F 221,02 F 290,88 F 256,72 F 485,56 F - 284,47 F - 352,28 F - 416,37 F - 459,36 F - 511,28 F - 575,18 F - 626,14 F on request on request Volume 4 2013 4 323 Crossed helical gear crossed axis à 90° Steel or machined plastic Module 2.5 Nm kW TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin 9.71 1.02 63.84 6.69 3.0 - ØD Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. ZH2.5-165 Dimensions in mm Z ØP Teeth PCD 10 35,36 12 42,43 15 53,03 17 60,10 20 70,71 22 77,78 25 88,39 30 106,07 32 113,14 35 123,74 40 141,42 42 148,49 45 159,10 46 162,63 50 176,78 55 194,45 56 197,99 60 212,13 66 233,35 70 247,49 76 268,70 80 282,84 90 318,20 96 339,41 100 353,55 RH 45° Helix angle ØD Outside 40,36 47,43 58,03 65,10 75,71 82,78 93,39 111,07 118,14 128,74 146,42 153,49 164,10 167,63 181,78 199,45 202,99 217,13 238,35 252,49 273,70 287,84 323,20 344,41 358,55 ØM Boss H ZH 28 30 30 30 40 36 40 45 50 45 50 45 50 50 50 50 50 50 50 65 50 65 50 65 50 65 50 65 50 65 50 65 50 - 50 - 50 - 50 - 50 - 50 - 50 - 50 - 50 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 15 12 15 12 20 12 20 12 20 15 20 15 20 15 20 17 20 17 20 17 20 20 20 20 20 20 20 20 20 20 20 20 20 - 20 - 20 - 20 - 20 - 20 - 20 - 20 - 20 - Gears available up to this size 165 324 4 Volume  4 2013 25 15 (18*) (12*) 40 (30*) STEEL DISCOUNTS .Info.. H2.5-165 ØA H8 ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Part number STEEL PLASTIC H2.5-10 ZH2.5-10 H2.5-12 ZH2.5-12 H2.5-15 ZH2.5-15 H2.5-17 ZH2.5-17 H2.5-20 ZH2.5-20 H2.5-22 ZH2.5-22 H2.5-25 ZH2.5-25 H2.5-30 ZH2.5-30 H2.5-32 ZH2.5-32 H2.5-35 ZH2.5-35 H2.5-40 ZH2.5-40 H2.5-42 ZH2.5-42 H2.5-45 ZH2.5-45 H2.5-46 ZH2.5-46 H2.5-50 ZH2.5-50 H2.5-55 ZH2.5-55 H2.5-56 - H2.5-60 - H2.5-66 - H2.5-70 - H2.5-76 - H2.5-80 - H2.5-90 - H2.5-96 - H2.5-100 - ØM *plastic gear (ZH) dimensions Dimensions: contact us HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH 40,21 F 22,26 F 43,45 F 27,33 F 50,77 F 38,44 F 56,49 F 48,38 F 64,21 F 55,02 F 70,45 F 63,91 F 78,67 F 71,45 F 91,86 F 102,14 F 98,37 F 109,16 F 106,06 F 128,85 F 126,72 F 166,24 F 128,83 F 169,01 F 164,58 F 246,36 F 164,58 F 286,27 F 227,86 F 345,95 F 285,48 F 355,67 F - 290,58 F - 296,13 F - 348,70 F - 413,77 F - 476,42 F - 518,95 F - 593,50 F - 632,03 F - 674,58 F on request on request www.hpceurope.com - +33(0)4 37 496 496 Crossed helical gear crossed axis à 90° Steel or machined plastic Module Nm kW 16.17 1.69 106.3 11.17 ØA H8 5.0 - ØD 30 20 (20*) (12*) 50 (32*) STEEL DISCOUNTS .Info.. Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. H3-140 ZH3-140 Dimensions in mm Z Teeth 9 10 15 16 20 25 26 30 34 35 36 40 45 46 50 55 56 60 65 68 70 76 80 86 90 *plastic gear (ZH) dimensions ØP - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 or delrin plastic Part number STEEL PLASTIC H3-9 ZH3-9 H3-10 ZH3-10 H3-15 ZH3-15 H3-16 ZH3-16 H3-20 ZH3-20 H3-25 ZH3-25 H3-26 ZH3-26 H3-30 ZH3-30 H3-34 ZH3-34 H3-35 ZH3-35 H3-36 ZH3-36 H3-40 ZH3-40 H3-45 ZH3-45 H3-46 ZH3-46 H3-50 ZH3-50 H3-55 - H3-56 - H3-60 - H3-65 - H3-68 - H3-70 - H3-76 - H3-80 - H3-86 - H3-90 - RH 45° Helix angle ØP ØD PCD Outside 42,43 48,43 42,43 48,43 63,64 69,64 67,88 73,88 84,85 90,85 106,07 112,07 110,31 116,31 127,28 133,28 144,25 150,25 148,49 154,49 152,74 158,74 169,71 175,71 190,92 196,92 195,16 201,16 212,13 218,13 233,35 239,35 237,59 243,59 254,56 260,56 275,77 281,77 288,50 294,50 296,98 302,98 322,44 328,44 339,41 345,41 364,87 370,87 381,84 387,84 ØM Boss H ZH 34 36 34 40 50 48 50 48 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 80 60 80 60 80 60 80 60 - 60 - 60 - 60 - 60 - 60 - 60 - 60 - 60 - 60 - 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request PLASTIC discounts Qty. 1+ Disc. List ØA Bore H ZH 20 15 20 15 25 15 25 15 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 - 25 - 25 - 25 - 25 - 25 - 25 - 25 - 25 - 25 - Gears available up to this size 140 3.0 ØM TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened delrin Dimensions: contact us +33(0)4 37 490 055 - cial2@hpceurope.com HPC 6+ -22% 30+ On request Price each 1 to 5 H ZH 45,22 F 25,41 F 48,65 F 30,68 F 65,71 F 56,37 F 67,77 F 58,12 F 85,60 F 77,70 F 114,47 F 119,02 F 116,67 F 129,81 F 137,42 F 165,75 F 191,80 F 214,27 F 199,03 F 214,27 F 205,96 F 260,05 F 245,26 F 302,17 F 291,37 F 375,43 F 313,81 F 595,20 F 349,84 F 595,20 F - 400,08 F - 420,43 F - 502,43 F - 570,52 F - 598,16 F - 616,26 F - 673,84 F - 728,58 F - 823,10 F - 881,58 F on request on request Volume 4 2013 4 325 Crossed helical gear crossed axis à 90° Steel Module 4.0 36.07 3.78 ØM 237.1 24.84 ØA H8 - Power transferred through 90° - Teeth are angled at 45° to the right - Pressure angle 20° - Material: Steel 34C10 ØP .Info.. 40 20 Important: A helical gear with a 45° RH angle meshes with a second identically angled gear. Part number H4-10 H4-12 H4-15 H4-16 H4-18 H4-20 H4-22 H4-25 H4-26 H4-28 H4-30 H4-32 H4-35 H4-36 H4-38 H4-40 H4-42 H4-45 H4-46 H4-48 H4-50 H4-55 H4-56 H4-58 H4-60 H4-100 Dimensions in mm Z Teeth 10 12 15 16 18 20 22 25 26 28 30 32 35 36 38 40 42 45 46 48 50 55 56 58 60 100 RH 45° Helix angle ØP PCD 56,57 67,88 84,85 90,51 101,82 113,14 124,45 141,42 147,08 158,39 169,71 181,02 197,99 203,65 214,96 226,27 237,59 254,56 260,22 271,53 282,84 311,13 316,78 328,10 339,41 ØD Outside 64,57 75,88 92,85 98,51 109,82 121,14 132,45 149,42 155,08 166,39 177,71 189,02 205,99 211,65 222,96 234,27 245,59 262,56 268,22 279,53 290,84 319,13 324,78 336,10 347,41 ØM Boss 45 50 50 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 Gears available up to this size 326 4 Volume  4 2013 PH Dimensions: contact us HPC ØD 40 60 DISCOUNTS 40+ Qty. 1+ 6+ 20+ Disc. List -12% -25% On request ØA Bore 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Price each 1 to 5 H PH 81,60 F 91,94 F 114,47 F 116,73 F 128,83 F 144,51 F 168,86 F 221,86 F 235,22 F 260,53 F 299,98 F 313,55 F 335,01 F 343,24 F 376,00 F 442,32 F 483,29 F 607,39 F 654,58 F 697,95 F 773,04 F 1 008,18 F 1 066,66 F 1 168,95 F 1 217,62 F On request Nm kW H TORQUE AND POWER INDICATION For 50 teeth at 1000 rpm 34C10 34C10 Z10CNF18.09 hardened on request www.hpceurope.com - +33(0)4 37 496 496 Custom-made gears STANDARD PARTS ADAPTED TO YOUR NEEDS Modifications Bore-size (mm) <Ø25 free for 20 or more Ø25 to Ø50 ≥Ø50 Keyway (mm) < 8 8 to 18 20 Tapped hole < M8 M8 Pinhole < Ø8 (mm) Ø8 Steel 9,50 E 17,20 E 54,70 E 7,70 E 13,80 E 25,00 E 4,80 E 6,00 E 2,50 E 4,00 E Plastic 2,20 E 4,10 E 12,00 E 2,10 E 5,70 E 10,70 E 1,55 E 2,50 E 1,10 E 1,55 E If you have had a breakdown, send us your worn or broken parts Ask us about different materials Steels, stainless, delrin, nylon, brass, bronze, cast iron, TUFNOL and more... Parts can be heat treated on request, prices will depend on process used. CONTACT us for a quote If you require gears manufactured from a drawing 3.2 Ø204 A ØA 3.2 Gearing width A General tolerance Attachment method - Keyway - Pin - Screw b GEAR CHARACTERISTICS Module Pressure angle Number of teeth Helical angle Pitch diameter Precision class 9 Centre distance Gear Drawing Material Other information +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 327 Custom-made gears Maximum sizes of made to measure parts Module / Pitch SPUR GEARS HELICAL GEARS Max. sizes (mm) Module 0.25 to module 6 Ø600 Module 0.25 to module 4 Module 0.25 to module 4 from Ø10 x length 10mm to Ø60 x length 500mm External Ø300 Module 0.25 to module 4 Ø140 RACKS Module 0.25 to module 6 Length 3000 BEVEL GEARS T PULLEYS AT HTD SINGLE CHAIN PINIONS DOUBLE Module 0.8 to module 6 Ø300 Pitch 2.5mm to 20mm Pitch 2.5mm to 20mm Pitch 3mm to 8mm Ø400 Pitch 4mm to 19.05mm Ø400 INTERNAL GEARS WORMS WORM WHEELS TRIPLE Length 300 Only given as an indication Please contact us for more information. 328 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Heat treatments Through-hardening Principle: In general, through-hardening consists of exposing the metal to a cycle of high-temperature heating followed by controlled cooling. Through-hardening is often the first step of a more complex treatment in which the metal will subsequently be tempered. The consequence of this treatment is a notable improvement in the hardness of the steel. Through-hardening is followed by tempering, a process that consists in heating the hardened metal (at a temperature lower than that used in the through-hardening process itself) in order to remove any tensions that may remain in the metal. This cycle of through-hardening and tempering can only be carried out on steels that contain sufficient carbon, such as 35NCD6. Gears made of 35NCD6 through-hardened to 45-50 HRc have a good resistance to wear. Case-hardening Principle: Case-hardening involves using an appropriate powder, paste, liquid or gas to enrich the carbon in all the surfaces of a material. This process is immediately followed by an oil through hardening. These combined treatments improve the surface and core hardness of the metal, which vary according to the type of steel used. An excellent compromise between high resistance to wear and good malleability is thus obtained. The depth to which the treatment is effective depends on the length of the heat cycle and the type of material used. Steel 34C10 can be case-hardened, but hardened gears made from this soft steel are only suitable for light loads. For heavier loads, through- and case- hardened steel 20NCD2 is recommended. The good core resistance and surface hardness (57-62 HRc) obtained after treatment allow gears made of through- and case-hardened 20NCD2 to withstand heavy loads and shocks received during use. The cost of these treatments depends on the number of parts to be treated and their size. The costs associated with using a treatment bath are fixed regardless of the number of parts to be treated. This cost is therefore divided between the number of parts to be treated. The size and dimension of the parts determine how many can be treated at the same time. Please contact us for more information. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 329 Heat treatments This table indicates the various processes that will be used for heat treating gears. MATERIAL CARBON DIFFUSION HEATING TEMPERATURE THROUGH-HARDENING 60C40 830/860°C XC38 810/840°C 42 CD4 860/890°C 35NCD6 820/850°C CASE-HARDENING 34C10 < Ø100 34C10 > Ø100 20NCD2 Maintain at 900- 930°C for 1h depth of case- hardening 0.2mm Maintain at 900- 930°C for 1h depth of case- hardening 0.2mm Maintain at 900- 930°C for 1h depth of case- hardening 0.2mm 770/790°C 900/930°C 820/840°C COOLING METHOD Maintain at 210-230°C in oil bath 1h/25 mm Maintain at 210-230°C in oil bath 1h/25 mm Maintain at 210-230°C in oil bath 1h/25 mm Maintain at 180-200°C in oil bath 1h/25 mm Maintain at 150-200°C in oil bath 1h/25 mm Maintain at 150-200°C in oil bath 1h/25 mm Maintain at 150-200°C in oil bath 1h/25 mm HARDNESS OBTAIINED 40-45 HRc 40-45 HRc 40-45 HRc 40-45 HRc 55-60 HRc 57-62 HRc 57-62 HRc TEMPERING Maintain at 650°C then allow to cool for 1h in open air or in oven Maintain at 650°C then allow to cool for 1h in open air or in oven Maintain at 690°C then allow to cool for 1h in open air or in oven Maintain at 650°C then allow to cool for 1h in open air or in oven Maintain at 650°C then allow to cool for 1h in open air or in oven Maintain at 650°C then allow to cool for 1h in open air or in oven Maintain at 650°C then allow to cool for 1h in open air or in oven *Do not stock or use at 250-450°C. Values are given as a guide only. 330 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Standard and special materials STANDARD MATERIALS GEARS: 20NCD2 34 C10 Delrin 35NCD6 Brass CuZn40Pb3 60C40 TUFNOL Stainless steel Z10 CNF 18.09 (303) Z6 CND 17.12 (316) WORMWHEELS: Bronze CuAl10NiFe4 Delrin Tufnol WORMS: 34 C10 Delrin Brass CHAINS AND SPROCKETS: 34 C10 Delrin Steel Cast Iron Stainless steel PULLEYS: Aluminium 6082 BEVEL GEARS: 60 C40 RACKS: 60 C40 34 C10 Delrin Brass Stainless steel Z10 CNF 18.09 (303) 34 C10 Stainless Z10CNF 18.09 (303) Delrin Stainless Z10 CNF 18.09 (303) SPECIAL MATERIALS } } 60 C40 42 CD4 35 NCD 6 Very 35 NCD 14 resistant 100 C6 34 C10 20 NCD 2 Z12 CF 13 30CD12 Z10 CNF 18.09 } ALUMINIUM DELRIN NYLON PHOSPHOR BRONZE BRASS TUFNOL Can be through or induction-hardened. Hardness 50-55 HRc Can be case-hardened 57-62 HRc. Stainless steel can be through-hardened to 35-45 HRc. Nitriding steel Stainless steel Maximum working temperature: 140°C Maximum working temperature: 160°C Maximum working temperature: 130°C +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 331 Material information MATERIALS Properties 0.62-0.82 Nylon 66 69 Delrin (polyoxymethylene) Tufnol Cast iron Aluminium alloy Aluminium bronze CuAl10NiFe4 Phosphor bronze CuSn12 34C10 34C10 Case-hardened 35NCD6 35NCD6 Hardened 20NCD2 Case-hardened Z10CNF18 09 Stainless steel 303 60C40 60C40 Tensile strength N/mm 2 Fine fibres GR17 (260) HR15N 68 260 295 420-720 360-500 430 Surface hardness By induction or through-hardening Surface hardness 850-1550 480-510 Elongation after fracture % 20% - 200% 60% 6% - 8% 18% - 40% 6.25% 18% 5% - 13% 35% - 40% Proof stress 02% N/mm 2 Surface stress Sc Bending stress Sb 500 3900 500 3900 560 1400 4500 9000 230 500 13000 140 -660 900 9000 170 - 280 700 7000 1400 9200 17000 635 - 1125 3000 5000 32000 26500 11000 50000 180-200 1800 20000 - 1400 19000 17000 40000 16%-17% 510-550 hardened 2800 When using the above data in any calculations, please note that the data is given as a guide only. HPC decline responsibility for any unforeseen consequences as many factors are not under our control. 332 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Material hardness DEGREES OF DEGREES OF DEGREES OF DEGREES OF HARDNESS HARDNESS HARDNESS HARDNESS IN HRc IN HRb IN VICKERS IN BRINNEL N/mm 2 AFNOR MATERIALS: -20 67 114 114 400 XC18 -9 74 131 131 460 34C10 1 83 154 156 560 60 C40 10 90 183 182 635 15 93 199 200 680 XC38 42 CD4 20 97 221 224 760 35NCD 6 20NCD2 25 101 250 249 850 35NCD 6 pre-treated 30 105 278 276 955 35 109 320 323 1110 40 112 385 370 1270 45 115 460 427 1453 50 118 535 497 1670 55 639 545 1870 57 694 576 1940 60 746 601 2110 63 867 652 2220 65 940 682 2300 67 1060 725 2400 70 1170 760 2640 Stainless steel 303 60 C40 through-hardened 35 NCD 6 through-hardened 42 CD 4 through-hardened xC38 through-hardened 20NCD2 case-hardened 30 CD 12 nitrided +33(0)4 37 490 055 - cial2@hpceurope.com HPC 30 CD12 34C10 case-hardened Volume 4 2013 4 333 Density D 792 Tensile strength D 628 at -55˚C at +23˚C at +70˚C at +100˚C at +122˚C Elongation at break D 638 at -55˚C at +23˚C at +70˚C at +100˚C at +122˚C Tensile E modulus D 638 Shear strength D 732 Flexural modulus D790 at -55˚C at +23˚C at +70˚C at +100˚C at +122˚C Flexural fatigue D 671 endurance limit Melting point D 2133 Deflection temperature under flexural load D 648 1.8 N/mm 2 2 0.5 N/mm Coefficient of linear thermal expansion D696 from -40˚C to +30˚C from -30˚C to +60˚C from +60˚C to +105˚C from +105˚C to +150˚C Properties ASTM Homo- polymer “Delrin” Verification ASTM Properties Verification Properties of delrin 150 (polyoxymethylene) Homo- polymer “Delrin” at 1% deformation 36 N/mm 2 at 10% deformation 124 N/mm 2 D 256 101 N/mm 2 Izod impact strength 69 N/mm 2 Unnotched no break 2 48 N/mm Notched -40˚C 96 J/m 36 N/mm 2 Notched +23˚C 23 J/m 2 26 N/mm Tensile impact strength D 1822 350 kJ/m 2 Deformation under load 0.38 % (14Nmm 2 at 50ºC) D 621 0.5 % 75 % Hardness (Rockwell) D 785 M94 - R120 230 % Water absorption D 570 < 260 % 0.25 % > 260 % 24h immersion Equilibrium 50 % RH 0.22 % 3100 N/mm 2 Equilibrium. 66N/mm 2 continuous immersion 0.90 % Coefficient of dynamic D 1894 3650 N/mm 2 friction against steel - dry -61 T 0.10 - 0.30 2 2620 N/mm water lubricated 0.10 - 0.20 2 1550 N/mm oil lubricated 0.05 - 0.10 895 N/mm 2 against brass 0.15 620 N/mm 2 against aluminium 0.15 32N/mm 2 against polyacetal 0.35 Flammability UL 94 HB 1.42g/cm 3 175˚ C Thermal conductivity 0.37W/mK 1.47 kJ/kgK 136˚C 172˚C Specific heat Maximum continuous use temperature in air +90ºC in water +65ºC 10.4 1x10 -5 ˚C 12.2 1x10 -5 ˚C 13.7 1x10 -5 ˚C 14.9 1x10 -5 ˚C Maximum intermittent use temperature in air +150ºC in water +80ºC Minimum continuous Volume resistivity D257 10 15 ohm.cm use temperature -40ºC D149 20 kV/mm Surface resistivity D257 10 13 ohm.cm Dielectric strength Dissipation factor D150 0.05 MHz short-time (2.3mm sheet) Dielectric constant D150 3.7 10 2 -10 6 Hz Compressive stress D 695 334 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Cross reference for International standards FRENCH AFNOR STANDARDS DIN SYMBOLS GERMAN WERKSTöFF STANDARDS BRITISH STANDARDS NEW OLD AMERICAN STANDARDS % Carbon 9521 1.0711 220M07 C15 1.0401 080M15 C22 1.0402 070M20 C35 1.0501 080A32 50C30 C25 1.0406 070M26 080M30 EN6 60C40 C40 1.0511 080M40 EN8 1040 0.36/0.44 C22 1.0501 080A35 & 37 EN8 A & B 1035 0.33/0.38 CK40 1.1186 080A40 EN8C 1040 0.38/0.43 35S20 1.0726 212M36 EN8M 1140 0.32/0.40 C45 1.0503 080M46 EN8 1045 0.42/0.50 C55 1.0535 070M55 EN9 1055 0.52/0.60 34Cr4 1.7033 530A32 EN18B 5132 0.28/0.33 42CrMo4 1.7225 708M40 EN19A 4140. 4142 0.36/0.44 34CrMo4 1.7220 708A37 EN19B 4135. 4137 0.35/0.40 34CrNiMo6 1.6582 817M40 EN24 4340 0.36/0.44 32NiCrMo145 1.6746 0826M40 EN26 30NiCrMo166 1.6747 835M30 EN30B 100C6 100Cr6 1.3505 535A99 EN31 214M15 EN202 34C10 C10 1.0301 045M10 EN32A 15S20 1.0723 212M15 EN32M 12NC15 14NiCr14 1.5752 655M13 EN36A 1.6723 835M15 EN39B 32CrMo12 1.7361 722M24 EN40B CK50 1.1206 080M50 EN43A 1050 0.45/0.55 X12CrS13 1.4005 416S21 EN56 416 (Stainless) 0.09/0.15 X10CrNiS189 1.4305 303S21 EN58 303 (Stainless) X5CrNiMo17133 1.4436 316S16 EN58J 316 (Stainless) 21NiCrMo2 1.6523 805M20 XC18 XC25 XC38 55C35 XC42H1 35MF6 XC48 XC38 32C4 42CD4 35CD4 35NCD6 35NCD14 35NCD16 16NCD17 30CD12 XC48H1 Z12CF13 Z10CNF18.09 Z6CND17.12 20NCD2 +33(0)4 37 490 055 - cial2@hpceurope.com En 1 A 1212 0.00/0.15 1015 0.12/0.18 EN3 A 1020 0.16/0.24 EN5 C 1035 0.30/0.35 1025 0.36/0.44 0.26/0.34 52100 1.20/1.60 1010 0.07/0.13 0.12/0.18 3415.3310.9314 0.10/0.16 0.12/0.18 0.20/0.28 0.17/0.23 HPC Volume 4 2013 4 335 Mechanical characteristics WERKSTöFF Elastic limit Classification Re (N/mm 2 ) Tensile strength Rm (N/mm 2 ) 1.0301 295 490-640 16 20NCD2 1.6523 590 780-1080 10 35NCD6 1.6582 900 Materials Case- hardening steel (ø30mm) Improved steel (ø30mm) 34C10 60C40 Materials (Values for cross-section of small dimensions) Stainless steel Z10CNF18.09 (303) Stainless steel Z2CNF18.10 (304) Stainless steel Z6CND17.12 (316) Elongation Lo = 5do A% Break lateral contraction J Resilience Z% 45 40 69 41 18 35 50 1100-1300 10 45 50 Elastic limit Tensile strength Rm (N/mm 2 ) Elongation Lo = 5do A% 1.4305 195-230 500-700 35 60 85 1.4306 180-215 460-680 45 60 85 1.4401 205-240 510-710 40 60 85 1.1186 400 630-780 WERKSTöFF Rp 0.2 at 0.2% Classification et Rp 0.1 at 0.1% (N/mm 2 ) Break lateral contraction J Resilience Z% Source : the steel key M AI SPE NT C EN IAL AN CE Too much wear, bad handling or an accident can cause your plant or machine to stop working Send us your worn or broken units for replacement by new ones. Whatever state the original is in, our technical team will be able to propose a solution CONTACT US... Tel. +33(0)437 496 496 Fax. +33(0)437 490 055 www.hpceurope.com 336 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Tolerances HPC manufactured gears are circular involute gears that conform to BS 4582 Part 1 Fig 1 DIN867. The manufacturing tolerances for these gears are given in the tables below. Please note: These tolerances do not apply for any gears not manufactured by HPC such as the plastic moulded ranges. Gears General tolerances Bore-size Nominal outside Ø Surface roughness Squareness ±0.15 mm H8 +0 / -0.15 mm Ra 3.2 js11 Gearing General Delrin PCD (nominal) Ø Backlash (nominal) TCE Ø10 to Ø60 TCE Ø61 to Ø125 TCE Ø126 to Ø300 -0.15 mm -0.11 mm 0.04 mm 0.06 mm 0.08 mm - - 0.05 mm 0.07 mm 0.08 mm Note: The total composite error (TCE) is the total size of the variation in central distance between a gear and a reference gear. Fixing Note: * Keyways are not aligned on the gearing axis as standard. On request, the keyways can be aligned: 0.6 Keyway* JS9 Nominal distance between centres HPC gears are machined to have a backlash of between 0.07mm and 0.3mm depending on the module. The distance between centres when assembling the gears should be the nominal distance between centres -0/+0.05mm. PCD Ø gear A + PCD Ø gear B Nominal distance between centres 2 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 337 The three types of gears: General info Cylindrical parallel gears: Spur gears: these are the most common and the easiest to apply. Advantages and disadvantages They can accept and axial movement No force is transmitted axially Helical parallel gears: The angle of the gearing allows continuous meshing of the gears and they therefore run quieter. Advantages and disadvantages A  right handed gear (angle ß) has to mesh with a left handed gear with the same angle ß. T  he efficiency is not as good as a spur gear. B  earings must withstand the axial thrust generated by the gears Important note: Helical angles are not standardised between manufacturers and gears from different manufacturers are not interchangeable. Gear pairs with non-parallel, non-intersecting axes: Crossed helical gears: these work on the same principles as parallel helical gears but the angles of the two gears are in the same direction and add up to 90°. Advantages and disadvantages  Allow 90° angular transmission Wide range of reduction ratios Low efficiency Worms and wheels: These have high reduction ratios (from 5:1 to 120:1). The total of the two angles being 90° allows angular transmission through 90°. Advantages and disadvantages L  ow efficiency (between 40-70%)depending on the materials used, the lubrication system and other factors. Gears with intersecting axes: Bevel gears: These allow 90° angular transmission in the sam plane and speed reduction ratios from 1:1 to 4:1. Advantages and disadvantages  R  equire careful assembly as the tips of the two cones intersect. B  earings must withstand axial thrust B  evel gears as supplied and must be used in pairs C  an be noisy, use helical bevel or spiral bevel gears if noise is a problem Reduction ratios: The calculation of speed ratios is the same for all three types of gear: W1 Z2 W1: Input speed Z1: Number of teeth on input gear = W2 Z1 W2: Output speed Z2: Number of teeth on output gear 338 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Cylindrical gears Tooth thickness Dedendum Pitch Whole depth Addendum (module) d A pitch diameter a + 0.05 - 0 Root clearance Centre distance (Nominal) d B pitch diameter outside diameter Gearing profile whole depth addendum (module) tooth thickness pitch head diameter dedendum +33(0)4 37 490 055 - cial2@hpceurope.com pitch diameter HPC Volume 4 2013 4 339 Tooth sizes tooth thickness whole depth pitch head diameter addendum dedendum (module) pitch diameter *MODULE 1.25 to 6 MODULE (m) 0.20 0.25 0.30 0.40 0.50 0.60 0.70 0.75 0.80 0.90 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 4.00 5.00 6.00 PITCH (p) π x m 0.628 0.785 0.942 1.256 1.570 1.884 2.199 2.356 2.513 2.827 3.141 3.926 4.712 5.497 6.283 7.068 7.853 8.639 9.424 12.566 15.707 18.849 340 4 Volume  4 2013 TOOTH WHOLE THICKNESS ADDENDUM DEDENDUM DEPTH π x m 2 0.314 0.392 0.471 0.628 0.785 0.942 1.099 1.178 1.256 1.413 1.570 1.963 2.356 2.7845 3.141 3.534 3.926 4.319 4.712 6.283 7.853 9.4245 HPC = m (module) 0.20 0.25 0.30 0.40 0.50 0.60 0.70 0.75 0.80 0.90 1.00 1.25 1.30 1.75 2.00 2.25 2.50 2.75 3.00 4.00 5.00 6.00 1.40 x m or 1.25 x m * 0.280 0.350 0.420 0.560 0.700 0.840 0.980 1.050 1.120 1.260 1.400 1.562 1.875 2.187 2.500 2.182 3.125 3.437 3.750 5.000 6.250 7.500 2.40 x m or 2.25 x m * 0.48 0.60 0.72 0.93 1.20 1.44 1.68 1.80 1.92 2.16 2.40 2.81 3.37 3.93 4.50 5.06 5.62 6.18 6.75 9.00 11.25 13.50 www.hpceurope.com - +33(0)4 37 496 496 Spur gears: some formulae A right hand cylindrical gear is defined by its number of gears and its module. All the other dimensions can then be calculated as shown below: Standard gearing Module Number of teeth Pitch Pitch diameter External diameter Addendum Dedendum module 0.25 to 1.25 Dedendum module 1.50 to 8 Teeth height module 0.25 to 1.25 Teeth height module 1.50 to 8 Tooth thickness Symbols Formulae Units m Z p d D ha hf hf h h e p ÷ π d ÷ m m x π Z x m (Z + 2) x m m 1.40 x m 1.25 x m 2.40 x m 2.25 x m π ÷ 2 m mm mm mm mm mm mm mm mm mm mm Teeth with correction: Gearing correction for gears with 18 to 17 teeth. We can correct the gearing of these gears to avoid the interference that can weaken the bottom of the teeth. Please note however that this will modify the pitch diameter of the gear and therefore the distance between centres will also be modified. Corrected pitch diameter Corrected outside diameter Symbols Formulae Units dc Dc m (Z + 1) m (Z + 3) mm mm Distance between centres: HPC gears are machined to have a backlash of between 0.07mm and 0.3mm depending on the module. The distance between centres when assembling the gears should be the nominal distance between centres -0/+0.05mm PCD Ø gear A + PCD Ø gear B Nominal distance between centres = 2 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 341 Helical gears: some formulae Standard gearing : Symbols Formulae Units m p d D Z ha Pz p ÷ π m x π Z.m ÷ cosß d + (2 x m) mm mm mm mm Module Pitch PCD Outside diameter Number of teeth Addendum Lead d x cosß m m d x π ÷ tanß mm mm Parallel helical gears: T  he angled teeth of this type of gear engage more gradually and the increased number of teeth engaged at the same time means a more continuous drive. It also means that the gears run smoother and more quietly than spur gears. Left angled gears mesh with right angled gears Helical gears generate a thrust along the axis of the gear  HPC helical gears are angled at 17°45’ and are not compatible with gears inclined at any other angle. General direction of force Parallel axis: left- hand gearing driver right- hand gearing driver right- hand gearing driven left- hand gearing driven 342 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Helical gears: some formulae parallel axis crossed axis Crossed helical gears: The 45° angle of the teeth on crossed helical gears allows movement to transmitted at 90° Right angled gears mesh with similarly angled gears Helical gears generate a thrust along the axis of the gear Direction of the force generated by the meshing Crossed axis: left-hand gearing driven gear right- hand gearing left-hand gearing right- hand gearing driving gear Left angled gears mesh with similarly angled gears driving gear Right angled gears mesh with similarly angled gears left-hand gearing right- hand gearing left-hand gearing right- hand gearing driving gear +33(0)4 37 490 055 - cial2@hpceurope.com HPC driven gear driving gear Volume 4 2013 4 343 Worms and wheels: some formulae Worms and wheels offer very high reductions in speed Under certain conditions systems can prevent back-drive. The efficiency of the system is low and rises as the gearing angle increases The helix direction is the same for both the worm and wheel There is little standardisation for wheels and worms. If a part breaks, it must be replaced by an identical part. Most of the time, replacement parts must be produced from samples. Wheels Module Pitch PCD Number of teeth Outside diameter Worms Outside diameter Helix angle tangent PCD Symbols Formulae Units m p d Z dc π m x π Z x m d ÷ m (Z + 2) x m mm mm mm Symboles Formules Unités D ß d (2 x m) + d (mx Z) ÷ d mm p x Z π tanß mm mm Distance between centres: HPC worms and wheels are machined to have a backlash of between 0.07mm and 0.3mm depending on the module. The distance between centres when assembling them should be the nominal distance between centres -0/+0.05mm. Nominal distance between centres = 344 4 Volume  4 2013 HPC d(wheel) + d(worm) 2 www.hpceurope.com - +33(0)4 37 496 496 Dimensioning a shaft The table below will allow you to determine a shaft diameter based on the type of material to be used and the torque to be transmitted. Shaft diameter (mm) Material Torque (Nm) Ø6 Ø10 Ø12 Ø15 Ø17 Ø20 Ø25 Ø30 Ø40 Ø50 Ø75 Ø100 6.60 11.50 23 34 55 105 180 440 840 2800 6600 1.90 60 C40 Z10CNF18.09 45000 kN/m 2 8.50 15 28 43 70 135 230 550 1000 3600 8500 2.50 42CD4 20NCD2 60000 kN/m 2 12.00 20 39 56 95 180 310 750 1500 4800 12000 Soft steel 1.50 XC18 XC65 35000 kN/m 2 This table is offered as a guide only and does not take specific applications into account USEFUL FORMULAE: kW = 0.746 x CV Nm = 9550 x kW rpm Choosing a gear When choosing a gear as part of a system there are many factors to be taken into account. The torque and the speed are the most obvious but there is also the material, the operating environment, the required life expectancy and the lubrication system. HPC can suggest the use of two simple methods to make the choice but neither takes into account all of the various parameters and as such HPC cannot be held responsible for any problems that may arise. However they do offer a good place to start. The first method uses the different values you will find in this catalogue and consists of applying coefficients to a given torque in two ways. Firstly, the next 2 pages allow you to calculate the module required based on the torque to be transmitted. The following 2 pages allow you to calculate the torque that can be transmitted by gears you have already chosen The second method takes two factors into account: wear and resistance. Depending on the results you get, you should use the lowest value. Don’t forget. our technical team is always there to help you. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 345 How to calculate the module you need ? mo dul e 1 .0 0.391 0.63 0.6 0.99 1 1.91 2.6 0.23 0.32 0.698 1.85 2.91 3.2 4L57 5 8.82 12 - - - - - - - 4 - 10.6 - - - - - - - 5.8 - 15.5 - - - - - - - 11 - 29.3 - - - 0.195 - - - 0.54 - 1.25 - - 0.04 0.1 - - - 0.3 - 0.7 mo dul e 0 .8 mo dul e 0 .9 mo dul e 0 .75 0.147 mo dul e 0 .7 0.07 mo dul e 0 .6 0.05 mo dul e 0 .5 Output torque indication (Nm) for two gears with 50 teeth at 1000rpm (input speed) mo dul e 0 .4 Indicative torque mo dul e 0 .25 mo dul e 0 .3 The majority of the pages in this catalogue contain references to torque and the table below provides a brief summary. The values for standard gears should only be used as a reference in your own calculations. These numbers are based on two well lubricated 50 tooth gears turning at 1000 rpm (input speed) for 12 hours per day, it will need to modifying to meet your requirements. To calculate the module required, you need to apply weighting coefficients A, B, C and D (see next page) to the torque to be transmitted. Torque to be transmitted < Indicative torque A x B x C x D Example: We need to transmit 20Nm at 500 rpm for 6H per day with a 20 tooth input gear and 100 tooth output gear: 20 < 49.80 0.25 x 1.27 x 1.15 x 1.1 Many different solutions are possible, such as the following: Straight gears module 1.75 hardened (G1.75 hardened). module 2 (YG2 untreated) Helical gears module 1.5 hardened (SH1.5 hardened) Spur gear G/PG/SSG/HG (34C10. stainless steel) G/PG (34C10 hardened) YG/XG (35NCD6. 20NCD2) YG/XG (35NCD6 hardened) YG/XG (20NCD2 hardened) GB (Brass) ZG/ZPG(Delrin) Helical gear SH/PSH (34C10) SH/PSH (34C10 hardened) ZSH/ZPSH (Delrin) H/PH (34C10) H/PH (34C10 hardened) ZH/ZPH(Delrin) - - 0.28 0.53 - 1.73 - 2.25 - 4.23 - - 1.12 2.09 - 6.83 - 8.92 - 16.74 - - - 0.13 - 0.4 - 0.5 - 1 - - 0.056 0.127 - 0.272 - 0.395 - 0.747 - - 0.375 0.705 - 1.791 - 2.596 - 4.908 - - - 0.03 - - - 0.1 - 0.18 Worm and wheel M/PM and W/SW (Bronze/steel) M/PM and WH/SWH (Bronze/treated steel) ZM/ZPM and ZW/ZSW (Delrin) ZM/ZPM and W/SW (Delrin/steel) - - 0.57 1.01 - - - 2.82 - 5.87 - - 1 1.86 - - - 5.26 - 10.06 - - 0.14 0.25 - - - 0.7 - 1.32 - - 0.36 0.65 - - - 1.84 - 3.42 346 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Calculs D Variation in working time COEF.C 0.85 1.00 1.15 1.54 2.38 COEF.D 0.90 1.00 1.10 1.22 1.44 1.58 mo dul e 0 .8 mo dul e 0 .75 mo dul e 0 .7 mo dul e 0 .6 Hours of work per day (H) 24 12 6 3 1 1/2 mo dul e 0 .5 mo dul e 0 .4 mo dul e 0 .25 mo dul e 0 .3 Variation in number of teeth of driven wheel Number of teeth COEF.B 100 1.27 50 1.00 30 0.80 20 0.63 Note : for worms and wheels, only use B, C, and D. Output torque indication (Nm) for two gears with 50 teeth at 1000rpm (input speed) Speed variation Speed (rpm) 2000 1000 500 100 10 B indicative torque C mo dul e 1 .0 Variation in number of teeth of driving wheel Number of teeth COEF.A 100 2.00 75 1.50 50 1.00 40 0.75 30 0.50 20 0.25 mo dul e 0 .9 A Spur gear G/PG/SSG/HG (34C10. stainless steel) G/PG (34C10 hardened) YG/XG (35NCD6. 20NCD2) YG/XG (35NCD6 hardened) YG/XG (20NCD2 hardened) GB (Brass) ZG/ZPG (Delrin) 3.8 8.88 16 25 48 88 200 294 441 918 18 41.5 75 119 228 421 953 1570 2350 5360 17 32 48 70 122 223 420 - - - 24 46 69 103 178 325 665 - - - 47 88 132 195 337 615 1256 - - - - - - - - - - - - - 1 2.4 - 6 11 18 55 90 140 179 SH/PSH (34C10) SH/PSH (34C10 hardened) ZSH/ZPSH (Delrin) H/PH (34C10) H/PH (34C10 hardened) ZH/ZPH (Delrin) 6.61 12.71 - 33.89 66.17 114.2 338 - - - 43.45 50.29 - 134 261.7 451.9 1340 - - - 1.5 3 - 8 12 20 - - - - 1.386 2.32 - 5.2 9.71 16.17 36.07 - - - 9.108 15.28 - 34.18 63.84 106.3 237.1 - - - 0.4 0.7 - 1.5 3 5 - - - - Helical gear Worm and wheel M/PM and W/SW (Bronze/steel) M/PM and WH/SWH (Bronze/treated steel) ZM/ZPM and ZW/ZSW (Delrin) ZM/ZPM and W/SW (Delrin/steel) 11.41 16.8 - 45 81 139 309 - - - 20.25 30 - 79 124 200 417 - - - 2.75 3.97 - 11 16 27 61 - - - 7.02 10.05 - 28.3 40 69 154 - - - +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 347 Calculs How to calculate the torque that can be transmitted by the gears you have already chosen ? The majority of the pages in this catalogue contain a value for torque. The values for standard gears should only be used as a reference in your own calculations. They are based on: (1) (2) (3) (4) A A driving gear with 50 teeth. turning at a speed of 1000 rpm A driven gear with 50 teeth. Gear used 12H per day. Good lubrication. Variation in the number of teeth of the driving gear: Fixed parameters: Speed of driving gear: 1000 rpm 50 tooth driving gear TEETH/DRIVING GEAR REAL TORQUE (Nm) 100 75 50 40 30 20 B Reference torque x 2.00 Reference torque x 1.50 Reference torque x 1.00 Reference torque x 0.75 Reference torque x 0.50 Reference torque x 0.25 Variation in number of teeth of the driven gear: Fixed parameters Speed of driving gear: 1000 rpm 50 tooth driven gear TEETH/DRIVEN GEAR REAL TORQUE (Nm) 100 50 30 20 Reference torque x 1.27 Reference torque x 1.00 Reference torque x 0.80 Reference torque x 0.63 NOTE: For worm and wheel systems, only B, C and D are used. 348 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Calculs How to calculate the torque that can be transmitted by gears you have already chosen ? C Speed variation: Fixed parameters: 50 tooth driving gear 50 tooth driven gear SPEED rpm REAL TORQUE (Nm) 2000 1000 500 100 10 D Reference torque x 0.85 Reference torque x 1.00 Reference torque x 1.15 Reference torque x 1.54 Reference torque x 2.38 Variation in working time: Fixed parameters: Speed of driving gear: 1000 rpm 50 tooth driving gear 50 tooth driven gear HOURS OF WORK PER DAY (H) REAL TORQUE (Nm) 24 12 6 3 1 1/2 Reference torque x 0.90 Reference torque x 1.00 Reference torque x 1.10 Reference torque x 1.22 Reference torque x 1.44 Reference torque x 1.58 CALCULATION AND EXAMPLES Example: helical gears H 0.8-30 and H0.8-100 Reference torque Co = 0.395 Nm VARIABLES: 30 tooth driving gear 100 tooth driven gear Speed in rotation of driving gear: 500 rpm Hours of work per day: 6 h SO FOR 30 TEETH {[(0.395 x 0.50) x 1.27 ] x 1.15} x 1.1 0.317 Nm Co A B C D +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 349 Spur gear calculations PITCH FACTOR USE FACTOR ‘K’ MODULE 0.5 0.6 0.75 0.9 1 1.25 1.5 1.75 2 2.5 3 4 5 HOURS OF WORK PER DAY 23.00 20.00 16.70 14.60 13.40 11.20 9.87 8.60 8.00 6.50 5.60 4.40 3.70 FACTOR X WEAR RESISTANCE 24 0.80 0.90 12 1.00 1.00 6 1.25 1.10 3 1.65 1.20 1 2.20 1.40 0.5 2.90 1.60 SPEED COEFFICIENT rpm ‘X’ 3000 0.20 2000 0.23 1000 0.24 600 0.30 400 0.32 200 0.36 100 0.42 50 0.47 10 0.57 5 0.60 SIZE FACTOR ‘Z’ VALUE 12 16 NUMBER 20 OF TEETH 25 OF THE 30 DRIVEN 40 GEAR 50 Rack NUMBER OF TEETH OF THE DRIVING GEAR 12 1.00 1.12 1.18 1.22 1.23 1.24 1.25 1.49 350 4 Volume  4 2013 16 1.12 1.26 1.38 1.44 1.49 1.52 1.60 2.05 HPC 20 1.18 1.38 1.52 1.62 1.66 1.75 1.89 2.55 25 1.22 1.44 1.62 1.75 1.84 2.00 2.20 3.20 30 1.23 1.49 1.66 1.84 1.98 2.20 2.35 3.60 40 1.24 1.52 1.75 2.00 2.20 2.50 2.75 4.70 50 1.25 1.59 1.89 2.20 2.35 2.75 3.00 5.60 www.hpceurope.com - +33(0)4 37 496 496 Spur gear calculations Calculation of the forces that spur and helical gears can withstand The following formulae allow you to calculate the resistance to wear (1) and resistance to force (2), both of which must be taken into account when designing a system. Resistance to wear (1) F u = X x Z x Sc x L 5.71 x K Resistance to force X x Sb x Mod x L (2) F e = 242 With - F u : Resistance to wear (N) - F e : Resistance to force (N) - X = Use factor x Speed factor - Sc: Surface tension (material data) - Sb: Bending force (material data) - K: Pitch factor - L: Gearing width (in mm) - Mod: Module These formulae give the maximum forces the pitch diameter can withstand. To find the admissible torque, use both formulae (3) and (4) and use the lowest of the two values. (3) C a = F u x R or (4) C a = F e x R R = Pitch radius = Pitch diameter/2 (in m) C a : Admissible torque (in Nm) These factors, coefficients and formulae are only given as a guide to enable you to do your own calculations and the results will only be approximations. The only way to obtain accurate results is to carry out repeated tests under real conditions. HPC decline any responsibility for the results obtained from these formulae. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 351 Fixing gears Dimensions of machined items for different shaft diameters Width* w JS9 Keyway Depth* Width* Pin hole øG w 00 +0.05 h -0 +0.05 -0 Depth* p ±0.05 Threaded hole øT Shaft or bore diameter Keyway from Ø up to Ø (inclusive) W (mm) Ø4 Ø6 Ø8 Ø10 Ø12 Ø17 Ø22 Ø30 Ø38 Ø44 Ø50 - Ø6 - Ø8 - Ø10 - Ø12 - Ø17 - Ø22 - Ø30 - Ø38 - Ø44 - Ø50 - Ø58 352 4 Volume  4 2013 - 2 3 4 5 6 8 10 12 14 16 HPC h(mm) - 1.07 1.50 1.86 2.35 2.83 3.34 3.34 3.35 3.80 4.30 p(mm) - 1.25 1.85 2.55 3.05 3.55 4.10 5.10 5.10 5.50 6.00 Pin hole diameter øG 1.50 2.00 3.00 4.00 5.00 6.00 8.00 10.00 10.00 10.00 10.00 Tapped hole øT M3 M3 M3 M4 M5 M6 M8 M10 M10 M12 M12 www.hpceurope.com - +33(0)4 37 496 496 Various fixing systems Set screw Self-lubricating Key. circlip bushing Gear & pinion pinned Internal clamp And also technicians to help you on +33(0)437 496 496 Gear clamp Integral gearclamp +33(0)4 37 490 055 - cial2@hpceurope.com HPC Woodruff key and lock nut fixing Volume 4 2013 4 353 ion rs s i c ea 7 e r P el g .35 v p be 356- p. Bevel gears p.356 prEcision range (Quality Grade 7f24) RaTIO Bevel gears 1:1 Pre-treated or stainless steel - Quality grade 7f24 DIN3985 - Pressure angle : 20° - Materials : Pre-treated 35NCD6 steel 28HRC Stainless steel 303 - Tooth thickness conforms to DIN3967 - Efficiency approx 88% .Options. - - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin 20NCD2 case hardened steel and 2:1 ratio on request .Info.. - T  orque figures are for 100 rpm and are given as a guide only - A pair requires 2 gears Part number No Steel Module of teeth Ød Stainless steel Ratio PBG0.6-30 PBG0.6-30S 1:1 0,6 30 18 PBG0.8-30 PBG0.8-30S 1:1 0,8 30 24 PBG1.0-30 PBG1.0-30S 1:1 1,0 30 30 PBG1.5-30 PBG1.5-30S 1:1 1,5 30 45 PBG2.0-30 PBG2.0-30S 1:1 2,0 30 60 PBG4.0-17 PBG4.0-17S 1:1 4,0 17 68 Dimensions in mm 356 4 Volume  4 2013 HPC 4 ade 7f2 gr Quality Øda 18,85 25,13 31,41 47,12 62,83 73,66 ØY 20 25 30 40 50 60 Øb 4,0 5,5 7,0 10,0 13,5 16,0 www.hpceurope.com - +33(0)4 37 496 496 RaTIO 1:1 X B Øda Ød ØBD Ødj H7 45° DL BL L 45° Y DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Ødj (H7) BL L BD DL X 6 13,0 14,0 12 9 8,58 8 16,0 17,0 18 10 11,43 8 18,5 20,0 22 12 14,29 10 23,0 25,0 35 14 21,44 12 28,0 30,5 40 15 28,59 25 34,5 39,0 50 20 31,17 Dimensions in mm Torque (Nm) Weight Price each 1 to 5 Steel Stainless steel (kg) Steel Stainless steel 0,69 041 0,012 43,62 F 63,28 F 1,56 0,94 0,031 52,22 F 75,75 F 2,95 1,77 0,059 60,56 F 87,84 F 8,94 5,36 0,186 72,12 F 104,57 F 20,14 12,08 0,363 89,58 F 129,92 F 24,62 14,77 0,430 118,98 F 172,58 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 357 ion d s i c an e r P rm els 3 wa whe p.38 - 0 6 p.3 Steel warm and wheel p.360 Plastic worm and wheel p372 prEcision range (Quality Grade 7e) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 0.5 - Quality grade 7e DIN 58405 - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 58405 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Quality e grade 7 Ø5 H7 Ø11 Ø10 PW Bored worm 4 16 2 x M3 to 90° 25 Ø6 h6 Ø7,5 Ø10 Ø11 11,5 8 PSW Shaft worm 8 16 Part number Steel Stainless steel Bored worm 36,5 80 DISCOUNTS No of starts Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Price each 1 to 5 Steel Stainless steel PW0.5-1 PW0.5-2 PW0.5-3 PW0.5-4 PW0.5-1S PW0.5-2S PW0.5-3S PW0.5-4S 1 2 3 4 37,90 F 39,90 F 39,90 F 39,90 F 47,83 F 47,83 F 47,83 F 47,83 F PSW0.5-1 PSW0.5-2 PSW0.5-3 PSW0.5-4 PSW0.5-1S PSW0.5-2S PSW0.5-3S PSW0.5-4S 1 2 3 4 70,62 F 70,62 F 70,62 F 70,62 F 84,79 F 84,79 F 84,79 F 84,79 F Shaft worm Dimensions in mm 360 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e) Worm and wheel set PWG Bronze wheel 5 - Quality grade 7e DIN 58405 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 MODULE 0.5 15 10 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - T  o order, add the number of starts to the part number: e.g. worm PW0,5-4, wheel PWG0,5-15-4 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Theoretical backlash (mm) Torque Price each No of Bore ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 1 to 5 Part number teeth a PWG0.5-18-1 18 9,50 9,00 10,00 10,50 3 7,50 0,073 - 0,031 1,47 36,69 F PWG0.5-19-1 19 9,75 9,50 10,50 11,00 4 8,00 0,073 - 0,031 1,55 37,70 F PWG0.5-20-1 20 10,00 10,00 11,00 11,50 4 8,00 0,073 - 0,031 1,63 38,56 F PWG0.5-21-1 21 10,25 10,50 11,50 12,00 4 8,00 0,075 - 0,030 1,71 39,08 F PWG0.5-22-1 22 10,50 11,00 12,00 12,50 4 8,00 0,075 - 0,030 1,80 39,41 F PWG0.5-23-1 23 10,75 11,50 12,50 13,00 4 8,00 0,075 - 0,030 1,88 36,64 F PWG0.5-24-1 24 11,00 12,00 13,00 13,50 5 10,00 0,075 - 0,030 1,96 37,31 F PWG0.5-25-1 25 11,25 12,50 13,50 14,00 5 10,00 0,080 - 0,033 2,04 41,34 F PWG0.5-26-1 26 11,50 13,00 14,00 14,50 5 10,00 0,080 - 0,033 2,12 41,52 F PWG0.5-27-1 27 11,75 13,50 14,50 15,00 5 10,00 0,080 - 0,033 2,20 41,72 F PWG0.5-28-1 28 12,00 14,00 15,00 15,50 5 10,00 0,080 - 0,033 2,28 41,95 F PWG0.5-29-1 29 12,25 14,50 15,50 16,00 6 12,50 0,080 - 0,033 2,37 42,00 F PWG0.5-30-1 30 12,50 15,00 16,00 16,50 6 12,50 0,080 - 0,033 2,45 42,11 F PWG0.5-32-1 32 13,00 16,00 17,00 17,50 6 12,50 0,080 - 0,033 2,61 43,89 F PWG0.5-35-1 35 13,75 17,50 18,50 19,00 6 12,50 0,080 - 0,033 2,86 45,76 F PWG0.5-40-1 40 15,00 20,00 21,00 21,50 6 15,00 0,080 - 0,033 3,26 51,22 F PWG0.5-45-1 45 16,25 22,50 23,50 24,00 6 15,00 0,080 - 0,033 3,67 52,88 F PWG0.5-48-1 48 17,00 24,00 25,00 25,50 6 15,00 0,080 - 0,033 3,92 54,69 F PWG0.5-50-1 50 17,50 25,00 26,00 26,50 6 15,00 0,080 - 0,033 4,08 55,46 F PWG0.5-55-1 55 18,75 27,50 28,50 29,00 6 15,00 0,087 - 0,033 4,53 59,56 F PWG0.5-60-1 60 20,00 30,00 31,00 31,50 8 20,00 0,087 - 0,033 4,98 65,30 F PWG0.5-65-1 65 21,25 32,50 33,50 34,00 8 20,00 0,087 - 0,033 5,43 70,29 F PWG0.5-68-1 68 22,00 34,00 35,00 35,50 8 20,00 0,087 - 0,033 5,70 72,81 F PWG0.5-70-1 70 22,50 35,00 36,00 36,50 8 20,00 0,087 - 0,033 5,89 75,36 F PWG0.5-72-1 72 23,00 36,00 37,00 37,50 8 20,00 0,087 - 0,033 6,07 77,88 F PWG0.5-75-1 75 23,75 37,50 38,50 39,00 8 20,00 0,087 - 0,033 6,35 80,40 F PWG0.5-78-1 78 24,50 39,00 40,00 40,50 8 30,00 0,087 - 0,033 6,62 83,08 F PWG0.5-80-1 80 25,00 40,00 41,00 41,50 8 30,00 0,087 - 0,033 6,81 85,81 F Dimensions in mm Wheels available with 18 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 361 prEcision range (Quality Grade 7e25) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 1.0 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 5 ade 7e2 gr Quality Ø8 H7 Ø17 Ø15 PW Bored worm 4 30 2 x M4 to 90° 40 Ø8 h6 Ø11 Ø15 Ø17 25 10 PSW Shaft worm 10 30 Part number Steel Stainless steel Bored worm 60 DISCOUNTS 135 No of starts Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Price each 1 to 5 Steel Stainless steel PW1.0-1 PW1.0-2 PW1.0-3 PW1.0-4 PW1.0-1S PW1.0-2S PW1.0-3S PW1.0-4S 1 2 3 4 52,64 F 52,64 F 52,64 F 52,64 F 63,17 F 63,17 F 63,17 F 63,17 F PSW1.0-1 PSW1.0-2 PSW1.0-3 PSW1.0-4 PSW1.0-1S PSW1.0-2S PSW1.0-3S PSW1.0-4S 1 2 3 4 85,14 F 85,14 F 85,14 F 85,14 F 102,19 F 102,19 F 102,19 F 102,19 F Shaft worm Dimensions in mm 362 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e25) Worm and wheel set PWG Bronze wheel MODULE 1.0 22 10 12 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - T  o order, add the number of starts to the part number: e.g. worm PW1,0-4, wheel PWG1,0-15-4 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request No of Bore Theoretical backlash (mm) Torque Price each Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 1 to 5 PWG1.0-15-1 15 15,00 15 17 18 5 12 0,112 - 0,042 2,05 56,35 F PWG1.0-16-1 16 15,50 16 18 19 5 12 0,112 - 0,042 2,31 57,71 F PWG1.0-17-1 17 16,00 17 19 20 5 12 0,112 - 0,042 2,57 58,09 F PWG1.0-18-1 18 16,50 18 20 21 5 12 0,112 - 0,042 2,85 58,76 F PWG1.0-19-1 19 17,00 19 21 22 5 12 0,112 - 0,042 3,14 58,96 F PWG1.0-20-1 20 17,50 20 22 23 5 12 0,112 - 0,042 3,45 59,31 F PWG1.0-21-1 21 18,00 21 23 24 5 12 0,112 - 0,042 3,76 59,64 F PWG1.0-22-1 22 18,50 22 24 25 5 12 0,114 - 0,040 4,09 60,25 F PWG1.0-23-1 23 19,00 23 25 26 5 12 0,114 - 0,040 4,43 60,81 F PWG1.0-24-1 24 19,50 24 26 27 6 20 0,114 - 0,040 4,79 62,53 F PWG1.0-25-1 25 20,00 25 27 28 6 20 0,114 - 0,040 5,15 65,19 F PWG1.0-26-1 26 20,50 26 28 29 6 20 0,114 - 0,040 5,53 65,99 F PWG1.0-27-1 27 21,00 27 29 30 6 20 0,114 - 0,040 5,92 67,23 F PWG1.0-28-1 28 21,50 28 30 31 6 20 0,114 - 0,040 6,32 67,68 F PWG1.0-29-1 29 22,00 29 31 32 8 25 0,114 - 0,040 6,73 68,82 F PWG1.0-30-1 30 22,50 30 32 33 8 25 0,114 - 0,040 7,15 69,82 F PWG1.0-35-1 35 25,00 35 37 38 8 25 0,114 - 0,040 9,44 84,39 F PWG1.0-40-1 40 27,50 40 42 43 10 35 0,114 - 0,040 12,00 99,09 F PWG1.0-45-1 45 30,00 45 47 48 10 35 0,114 - 0,040 14,84 114,94 F PWG1.0-48-1 48 31,50 48 50 51 10 35 0,116 - 0,038 16,67 122,97 F PWG1.0-50-1 50 32,50 50 52 53 10 35 0,116 - 0,038 17,94 132,30 F PWG1.0-52-1 52 33,50 52 54 55 10 35 0,136 - 0,048 19,25 134,44 F PWG1.0-55-1 55 35,00 55 57 58 10 35 0,136 - 0,048 21,29 139,07 F PWG1.0-60-1 60 37,50 60 62 63 10 40 0,136 - 0,048 24,90 145,70 F PWG1.0-65-1 65 40,00 65 67 68 10 40 0,136 - 0,048 28,76 157,64 F PWG1.0-70-1 70 42,50 70 72 73 10 40 0,136 - 0,048 32,87 170,14 F PWG1.0-75-1 75 45,00 75 77 78 10 40 0,136 - 0,048 37,21 178,41 F PWG1.0-80-1 80 47,50 80 82 83 10 50 0,136 - 0,048 41,80 216,37 F Dimensions in mm Wheels available with 15 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 363 prEcision range (Quality Grade 7e25) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 1.5 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 5 ade 7e2 gr Quality Ø10 H7 Ø23 Ø20 PW Bored worm 5 38 2 x M5 to 90° 50 Ø10 h6 Ø14 Ø20 Ø23 38,5 12,5 12,5 38 PSW Shaft worm Part number Steel Stainless steel Bored worm 73,5 175 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request No of starts Price each 1 to 5 Steel Stainless steel PW1.5-1 PW1.5-2 PW1.5-3 PW1.5-4 PW1.5-1S PW1.5-2S PW1.5-3S PW1.5-4S 1 2 3 4 58,42 F 58,42 F 58,42 F 58,42 F 75,96 F 75,96 F 75,96 F 75,96 F PSW1.5-1 PSW1.5-2 PSW1.5-3 PSW1.5-4 PSW1.5-1S PSW1.5-2S PSW1.5-3S PSW1.5-4S 1 2 3 4 99,33 F 99,33 F 99,33 F 99,33 F 129,13 F 129,13 F 129,13 F 129,13 F Shaft worm Dimensions in mm 364 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e25) Worm and wheel set PWG Bronze wheel MODULE 1.5 30 15 15 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - T  o order, add the number of starts to the part number: e.g. worm PW1,5-4, wheel PWG1,5-15-4 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Theoretical backlash (mm) Torque Price each No of Bore Part number teeth a 1 to 5 ØD ØDa ØDe ØA ØM Max. - Min. (Nm) PWG1.5-15-1 15 21,25 22,50 25,50 27,00 6 20 0,114 - 0,040 5,29 79,98 F PWG1.5-16-1 16 22,00 24,00 27,00 28,50 6 20 0,114 - 0,040 5,95 82,69 F PWG1.5-17-1 17 22,75 25,50 28,50 30,00 6 20 0,114 - 0,040 6,63 84,31 F PWG1.5-18-1 18 23,50 27,00 30,00 31,50 6 20 0,114 - 0,040 7,35 85,42 F PWG1.5-19-1 19 24,25 28,50 31,50 33,00 6 20 0,114 - 0,040 8,10 86,92 F PWG1.5-20-1 20 25,00 30,00 33,00 34,50 6 20 0,114 - 0,040 8,89 88,11 F PWG1.5-21-1 21 25,75 31,50 34,50 36,00 8 25 0,114 - 0,040 9,70 89,49 F PWG1.5-22-1 22 26,50 33,00 36,00 37,50 8 25 0,114 - 0,040 10,72 90,96 F PWG1.5-23-1 23 27,25 34,50 37,50 39,00 8 25 0,114 - 0,040 11,62 92,21 F PWG1.5-24-1 24 28,00 36,00 39,00 40,50 8 25 0,114 - 0,040 12,54 94,06 F PWG1.5-25-1 25 28,75 37,50 40,50 42,00 8 25 0,114 - 0,040 13,72 96,80 F PWG1.5-26-1 26 29,50 39,00 42,00 43,50 8 25 0,114 - 0,040 14,72 98,33 F PWG1.5-27-1 27 30,25 40,50 43,50 45,00 8 25 0,117 - 0,038 15,89 100,30 F PWG1.5-28-1 28 31,00 42,00 45,00 46,50 8 25 0,117 - 0,038 16,96 101,71 F PWG1.5-29-1 29 31,75 43,50 46,50 48,00 10 35 0,117 - 0,038 18,07 103,87 F PWG1.5-30-1 30 32,50 45,00 48,00 49,50 10 35 0,117 - 0,038 19,36 106,63 F PWG1.5-35-1 35 36,25 52,50 55,50 57,00 10 35 0,137 - 0,048 25,55 132,50 F PWG1.5-40-1 40 40,00 60,00 63,00 64,50 12 45 0,137 - 0,048 32,49 161,95 F PWG1.5-45-1 45 43,75 67,50 70,50 72,00 12 45 0,137 - 0,048 40,80 202,48 F PWG1.5-48-1 48 46,00 72,00 75,00 76,50 12 45 0,137 - 0,048 45,83 227,40 F PWG1.5-50-1 50 47,50 75,00 78,00 79,50 14 55 0,137 - 0,048 50,09 244,74 F PWG1.5-55-1 55 51,25 82,50 85,50 87,00 14 55 0,139 - 0,045 59,47 291,13 F PWG1.5-60-1 60 55,00 90,00 93,00 94,50 14 55 0,139 - 0,045 69,55 341,36 F PWG1.5-65-1 65 58,75 97,50 100,50 102,00 14 55 0,139 - 0,045 83,42 390,03 F PWG1.5-70-1 70 62,50 105,00 108,00 109,50 16 65 0,139 - 0,045 95,32 447,48 F PWG1.5-75-1 75 66,25 112,50 115,50 117,00 16 65 0,139 - 0,045 107,92 508,72 F PWG1.5-78-1 78 68,50 117,00 120,00 121,50 16 65 0,139 - 0,045 115,82 547,58 F PWG1.5-80-1 80 70,00 120,00 123,00 124,50 16 65 0,139 - 0,045 121,32 574,12 F Dimensions in mm Wheels available with 15 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 365 prEcision range (Quality Grade 7e25) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 2.0 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 5 ade 7e2 gr Quality Ø15 H7 Ø29 Ø25 PW Bored worm 6 45 2 x M6 to 90° 60 Ø6 h6 Ø19 Ø25 Ø29 35 12,5 12,5 45 PSW Shaft worm Part number Steel Stainless steel Bored worm 80 DISCOUNTS 185 Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request No of starts Price each 1 to 5 Steel Stainless steel PW2.0-1 PW2.0-2 PW2.0-3 PW2.0-4 PW2.0-1S PW2.0-2S PW2.0-3S PW2.0-4S 1 2 3 4 89,02 F 89,02 F 89,02 F 89,02 F 120,20 F 120,20 F 120,20 F 120,20 F PSW2.0-1 PSW2.0-2 PSW2.0-3 PSW2.0-4 PSW2.0-1S PSW2.0-2S PSW2.0-3S PSW2.0-4S 1 2 3 4 135,00 F 135,00 F 135,00 F 135,00 F 182,28 F 182,28 F 182,28 F 182,28 F Shaft worm Dimensions in mm 366 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e25) Worm and wheel set PWG Bronze wheel MODULE 2.0 40 20 20 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - T  o order, add the number of starts to the part number: e.g. worm PW2,0-4, wheel PWG2,0-15-4 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Theoretical backlash (mm) Torque Price each No of Bore ØD ØDa ØDe ØA ØM Max. - Min. (Nm) Part number teeth a 1 to 5 PWG2.0-15-1 15 27,50 30 34 36 10 25 0,114 - 0,040 11,30 156,89 F PWG2.0-16-1 16 28,50 32 36 38 10 25 0,114 - 0,040 12,69 165,84 F PWG2.0-17-1 17 29,50 34 38 40 10 25 0,114 - 0,040 14,16 168,98 F PWG2.0-18-1 18 30,50 36 40 42 10 25 0,117 - 0,038 15,69 172,15 F PWG2.0-19-1 19 31,50 38 42 44 10 25 0,117 - 0,038 17,30 175,40 F PWG2.0-20-1 20 32,50 40 44 46 10 25 0,117 - 0,038 19,29 178,57 F PWG2.0-21-1 21 33,50 42 46 48 12 35 0,117 - 0,038 21,06 188,61 F PWG2.0-22-1 22 34,50 44 48 50 12 35 0,117 - 0,038 23,27 199,92 F PWG2.0-23-1 23 35,50 46 50 52 12 35 0,117 - 0,038 25,62 205,50 F PWG2.0-24-1 24 36,50 48 52 54 12 35 0,117 - 0,038 28,09 210,68 F PWG2.0-25-1 25 37,50 50 54 56 12 35 0,117 - 0,038 30,24 216,19 F PWG2.0-26-1 26 38,50 52 56 58 12 35 0,137 - 0,048 32,45 221,47 F PWG2.0-27-1 27 39,50 54 58 60 12 35 0,137 - 0,048 34,73 223,20 F PWG2.0-28-1 28 40,50 56 60 62 12 35 0,137 - 0,048 37,08 226,80 F PWG2.0-29-1 29 41,50 58 62 64 14 50 0,137 - 0,048 39,50 230,38 F PWG2.0-30-1 30 42,50 60 64 66 14 50 0,137 - 0,048 41,98 232,18 F PWG2.0-32-1 32 44,50 64 68 70 14 50 0,137 - 0,048 47,15 241,10 F PWG2.0-35-1 35 47,50 70 74 76 14 50 0,137 - 0,048 55,41 283,00 F PWG2.0-38-1 38 50,50 76 80 82 14 50 0,139 - 0,045 64,25 328,23 F PWG2.0-40-1 40 52,50 80 84 86 14 50 0,139 - 0,045 70,46 360,25 F PWG2.0-42-1 42 54,50 84 88 90 14 50 0,139 - 0,045 76,93 393,80 F PWG2.0-45-1 45 57,50 90 94 96 14 50 0,139 - 0,045 88,46 446,77 F PWG2.0-48-1 48 60,50 96 100 102 14 50 0,139 - 0,045 99,36 500,19 F PWG2.0-50-1 50 62,50 100 104 106 16 65 0,139 - 0,045 106,94 539,28 F PWG2.0-52-1 52 64,50 104 108 110 16 65 0,139 - 0,045 114,76 580,06 F PWG2.0-55-1 55 67,50 110 114 116 16 65 0,139 - 0,045 126,95 637,70 F PWG2.0-58-1 58 70,50 116 120 122 16 65 0,139 - 0,045 139,68 704,27 F PWG2.0-60-1 60 72,50 120 124 126 16 65 0,139 - 0,045 153,04 750,43 F Dimensions in mm Wheels available with 15 to 60 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 367 prEcision range (Quality Grade 7e25) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 2.5 - Quality grade 7e25 DIN 3974 - Pressure angle : 20° - Material : Pre-treated steel 35NCD6, 28HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 5 ade 7e2 gr Quality Ø15 H7 Ø40 Ø35 PW Bored worm 6,5 50 2 x M6 to 90° 65 Ø15 h6 Ø20 Ø35 Ø40 40 12,5 PSW Shaft worm 12,5 50 Part number Steel Stainless steel Bored worm 85 DISCOUNTS 200 Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request No of starts Price each 1 to 5 Steel Stainless steel PW2.5-1 PW2.5-2 PW2.5-3 PW2.5-4 PW2.5-1S PW2.5-2S PW2.5-3S PW2.5-4S 1 2 3 4 137,79 F 137,79 F 137,79 F 137,79 F 186,06 F 186,06 F 186,06 F 186,06 F PSW2.5-1 PSW2.5-2 PSW2.5-3 PSW2.5-4 PSW2.5-1S PSW2.5-2S PSW2.5-3S PSW2.5-4S 1 2 3 4 202,56 F 202,56 F 202,56 F 202,56 F 273,47 F 273,47 F 273,47 F 273,47 F Shaft worm Dimensions in mm 368 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e25) Worm and wheel set PWG MODULE 2.5 Bronze wheel 50 25 25 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM .Info.. a js8 - Torque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW2,5-4, wheel PWG2,5-15-4 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Theoretical backlash (mm) Torque No of Bore Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) PWG2.5-15-1 15 36,25 37,50 42,50 45,00 10 30 0,116 - 0,038 22,38 PWG2.5-16-1 16 37,50 40,00 45,00 47,50 10 30 0,116 - 0,038 25,13 PWG2.5-17-1 17 38,75 42,50 47,50 50,00 10 30 0,116 - 0,038 28,52 PWG2.5-18-1 18 40,00 45,00 50,00 52,50 10 30 0,116 - 0,038 31,61 PWG2.5-19-1 19 41,25 47,50 52,50 55,00 10 30 0,116 - 0,038 34,84 PWG2.5-20-1 20 42,50 50,00 55,00 57,50 10 30 0,116 - 0,038 38,85 PWG2.5-21-1 21 43,75 52,50 57,50 60,00 12 45 0,137 - 0,048 42,42 PWG2.5-22-1 22 45,00 55,00 60,00 62,50 12 45 0,137 - 0,048 46,12 PWG2.5-23-1 23 46,25 57,50 62,50 65,00 12 45 0,137 - 0,048 49,97 PWG2.5-24-1 24 47,50 60,00 65,00 67,50 12 45 0,137 - 0,048 53,95 PWG2.5-25-1 25 48,75 62,50 67,50 70,00 12 45 0,137 - 0,048 58,06 PWG2.5-26-1 26 50,00 65,00 70,00 72,50 12 45 0,137 - 0,048 63,34 PWG2.5-27-1 27 51,25 67,50 72,50 75,00 12 45 0,139 - 0,045 67,80 PWG2.5-28-1 28 52,50 70,00 75,00 77,50 12 45 0,139 - 0,045 72,38 PWG2.5-29-1 29 53,75 72,50 77,50 80,00 14 55 0,139 - 0,045 77,10 PWG2.5-30-1 30 55,00 75,00 80,00 82,50 14 55 0,139 - 0,045 83,97 PWG2.5-32-1 32 57,50 80,00 85,00 87,50 14 55 0,139 - 0,045 94,31 PWG2.5-35-1 35 61,25 87,50 92,50 95,00 14 55 0,139 - 0,045 110,82 PWG2.5-38-1 38 65,00 95,00 100,00 102,50 14 55 0,139 - 0,045 129,53 PWG2.5-40-1 40 67,50 100,00 105,00 107,50 14 55 0,139 - 0,045 142,06 PWG2.5-42-1 42 70,00 105,00 110,00 112,50 16 65 0,139 - 0,045 157,56 PWG2.5-45-1 45 73,75 112,50 117,50 120,00 16 65 0,139 - 0,045 178,40 PWG2.5-48-1 48 77,50 120,00 125,00 127,50 16 65 0,139 - 0,045 200,93 Dimensions in mm Wheels available with 15 to 48 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Price each 1 to 5 176,24 F 180,09 F 183,80 F 194,66 F 205,46 F 216,28 F 221,62 F 226,03 F 234,87 F 237,92 F 240,44 F 243,09 F 245,04 F 246,52 F 249,03 F 251,03 F 307,39 F 341,81 F 399,54 F 446,54 F 499,60 F 552,62 F 612,12 F Volume 4 2013 4 369 prEcision range (Quality Grade 7e25) PW Worm and wheel set PSW Worm available in pre-treated or stainless steel MODULE 3.0 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 5 ade 7e2 gr Quality Ø20 H7 Ø46 Ø40 PW Bored worm 7 55 2 x M8 to 90° 70 Ø20 h6 Ø27 Ø40 Ø46 45 12,5 PSW Shaft worm Part number Steel Stainless steel Bored worm 12,5 55 90 DISCOUNTS 215 No of starts Qty. 1+ 6+ 19+ 50+ Disc. List -5% -10% On request Price each 1 to 5 Steel Stainless steel PW3.0-1 PW3.0-2 PW3.0-3 PW3.0-4 PW3.0-1S PW3.0-2S PW3.0-3S PW3.0-4S 1 2 3 4 161,56 F 161,56 F 161,56 F 161,56 F 218,16 F 218,16 F 218,16 F 218,16 F PSW3.0-1 PSW3.0-2 PSW3.0-3 PSW3.0-4 PSW3.0-1S PSW3.0-2S PSW3.0-3S PSW3.0-4S 1 2 3 4 231,18 F 231,18 F 231,18 F 231,18 F 312,14 F 312,14 F 312,14 F 312,14 F Shaft worm Dimensions in mm 370 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 7e25) Worm and wheel set PWG MODULE 3.0 Bronze wheel 60 30 30 - Quality grade 7e25 DIN 3974 - Pressure angle: 20° - Material: Bronze CA104 (CuAI10Ni5Fe4) - Tooth thickness conforms to DIN 3967 .Options. - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM .Info.. a js8 - Torque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW3,0-4, wheel PWG3,0-15-4 DISCOUNTS Qty. 1+ 6+ 19+ Disc. List -5% -10% Theoretical backlash (mm) Torque No of Bore Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) PWG3.0-15-1 15 42,50 45 51 54 12 35 0,117 - 0,038 33,19 PWG3.0-16-1 16 44,00 48 54 57 12 35 0,117 - 0,038 37,27 PWG3.0-17-1 17 45,50 51 57 60 12 35 0,137 - 0,048 41,57 PWG3.0-18-1 18 47,00 54 60 63 12 35 0,137 - 0,048 46,08 PWG3.0-19-1 19 48,50 57 63 66 12 35 0,137 - 0,048 51,73 PWG3.0-20-1 20 50,00 60 66 69 12 35 0,137 - 0,048 56,73 PWG3.0-21-1 21 51,50 63 69 72 14 50 0,139 - 0,045 63,06 PWG3.0-22-1 22 53,00 66 72 75 14 50 0,139 - 0,045 68,57 PWG3.0-23-1 23 54,50 69 75 78 14 50 0,139 - 0,045 74,28 PWG3.0-24-1 24 56,00 72 78 81 14 50 0,139 - 0,045 81,63 PWG3.0-25-1 25 57,50 75 81 84 14 50 0,139 - 0,045 87,85 PWG3.0-26-1 26 59,00 78 84 87 14 50 0,139 - 0,045 94,28 PWG3.0-27-1 27 60,50 81 87 90 14 50 0,139 - 0,045 101,79 PWG3.0-28-1 28 62,00 84 90 93 14 50 0,139 - 0,045 108,68 PWG3.0-29-1 29 63,50 87 93 96 16 65 0,139 - 0,045 116,77 PWG3.0-30-1 30 65,00 90 96 99 16 65 0,139 - 0,045 124,12 PWG3.0-32-1 32 68,00 96 102 105 16 65 0,139 - 0,045 139,41 PWG3.0-35-1 35 72,50 105 111 114 16 65 0,139 - 0,045 163,81 PWG3.0-38-1 38 77,00 114 120 123 16 65 0,139 - 0,045 196,49 PWG3.0-40-1 40 80,00 120 126 129 16 65 0,139 - 0,045 215,50 Dimensions in mm Wheels available with 15 to 40 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC 50+ On request Price each 1 to 5 186,37 F 193,47 F 205,58 F 217,65 F 229,74 F 235,50 F 253,95 F 266,05 F 274,83 F 278,74 F 283,60 F 323,91 F 347,17 F 374,10 F 391,53 F 408,24 F 482,75 F 555,83 F 627,02 F 726,00 F Volume 4 2013 4 371 prEcision range (Quality Grade 8e) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 0,5 Plastic - Quality grade 8e DIN 58405 - Pressure angle : 20° - Material : Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 58405 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø5 H7 Ø11 Ø10 PWDL Bored worm 4 16 2 x M3 to 90° 25 Ø6 h6 Ø7,5 Ø10 Ø11 11,5 8 PSWDL Shaft worm Part number Delrin Peek Bored worm 8 16 36,5 DISCOUNTS 80 of starts Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Price each 1 to 5 Delrin Peek PW0.5-1DL PW0.5-2DL PW0.5-3DL PW0.5-4DL PW0.5-1PK PW0.5-2PK PW0.5-3PK PW0.5-4PK 1 2 3 4 31,91 F 33,49 F 35,20 F 37,29 F On request On request On request On request PSW0.5-1DL PSW0.5-2DL PSW0.5-3DL PSW0.5-4DL PSW0,5-1PK PSW0,5-2PK PSW0,5-3PK PSW0,5-4PK 1 2 3 4 56,52 F 59,08 F 61,64 F 64,24 F On request On request On request On request Shaft worm Dimensions in mm 372 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e) Worm and wheel set PWG dl Delrin wheel 5 MODULE 0,5 15 10 - Quality grade 8e DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 .Options. ØA ØM - Also available in PEEK GF30® ØDe ØDa ØD (Light brown), ask for details. - A  lternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin a js8 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW0,5-4DL, wheel PWG0,5-15-4DL Part number PWG0.5-18-1DL PWG0.5-19-1DL PWG0.5-20-1DL PWG0.5-21-1DL PWG0.5-22-1DL PWG0.5-23-1DL PWG0.5-24-1DL PWG0.5-25-1DL PWG0.5-26-1DL PWG0.5-27-1DL PWG0.5-28-1DL PWG0.5-29-1DL PWG0.5-30-1DL PWG0.5-32-1DL PWG0.5-35-1DL PWG0.5-40-1DL PWG0.5-45-1DL PWG0.5-48-1DL PWG0.5-50-1DL PWG0.5-55-1DL PWG0.5-60-1DL PWG0.5-65-1DL PWG0.5-68-1DL PWG0.5-70-1DL PWG0.5-72-1DL PWG0.5-75-1DL PWG0.5-78-1DL PWG0.5-80-1DL Dimensions in mm DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Theoretical backlash (mm) Torque Price each of Bore teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 1 to 5 18 9,50 9,00 10,00 10,50 3 7,50 0,073 - 0,031 0,74 18,85 F 19 9,75 9,50 10,50 11,00 4 8,00 0,073 - 0,031 0,78 19,39 F 20 10,00 10,00 11,00 11,50 4 8,00 0,073 - 0,031 0,82 19,79 F 21 10,25 10,50 11,50 12,00 4 8,00 0,075 - 0,030 0,86 20,07 F 22 10,50 11,00 12,00 12,50 4 8,00 0,075 - 0,030 0,90 20,27 F 23 10,75 11,50 12,50 13,00 4 8,00 0,075 - 0,030 0,94 18,85 F 24 11,00 12,00 13,00 13,50 5 10,00 0,075 - 0,030 0,98 19,16 F 25 11,25 12,50 13,50 14,00 5 10,00 0,080 - 0,033 1,02 21,23 F 26 11,50 13,00 14,00 14,50 5 10,00 0,080 - 0,033 1,06 21,34 F 27 11,75 13,50 14,50 15,00 5 10,00 0,080 - 0,033 1,10 21,46 F 28 12,00 14,00 15,00 15,50 5 10,00 0,080 - 0,033 1,14 21,55 F 29 12,25 14,50 15,50 16,00 6 12,50 0,080 - 0,033 1,19 21,57 F 30 12,50 15,00 16,00 16,50 6 12,50 0,080 - 0,033 1,23 21,62 F 32 13,00 16,00 17,00 17,50 6 12,50 0,080 - 0,033 1,31 22,54 F 35 13,75 17,50 18,50 19,00 6 12,50 0,080 - 0,033 1,43 23,55 F 40 15,00 20,00 21,00 21,50 6 15,00 0,080 - 0,033 1,63 26,31 F 45 16,25 22,50 23,50 24,00 6 15,00 0,080 - 0,033 1,84 27,17 F 48 17,00 24,00 25,00 25,50 6 15,00 0,080 - 0,033 1,96 28,11 F 50 17,50 25,00 26,00 26,50 6 15,00 0,080 - 0,033 2,04 28,49 F 55 18,75 27,50 28,50 29,00 6 15,00 0,087 - 0,033 2,27 30,64 F 60 20,00 30,00 31,00 31,50 8 20,00 0,087 - 0,033 2,49 33,57 F 65 21,25 32,50 33,50 34,00 8 20,00 0,087 - 0,033 2,72 36,12 F 68 22,00 34,00 35,00 35,50 8 20,00 0,087 - 0,033 2,85 37,46 F 70 22,50 35,00 36,00 36,50 8 20,00 0,087 - 0,033 2,95 38,74 F 72 23,00 36,00 37,00 37,50 8 20,00 0,087 - 0,033 3,04 40,02 F 75 23,75 37,50 38,50 39,00 8 20,00 0,087 - 0,033 3,18 41,34 F 78 24,50 39,00 40,00 40,50 8 30,00 0,087 - 0,033 3,31 42,71 F 80 25,00 40,00 41,00 41,50 8 30,00 0,087 - 0,033 3,41 44,11 F Wheels available with 18 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 373 prEcision range (Quality Grade 8e25) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 1,0 Plastic - Quality grade 8e25 DIN 3974 - Pressure angle : 20° - Material : Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø8 H7 Ø17 Ø15 PWDL Bored worm 4 30 2 x M4 to 90° 40 Ø8 h6 Ø11 Ø15 Ø17 25 10 PSWDL Shaft worm Part number Delrin Peek Bored worm 10 30 60 DISCOUNTS 135 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request of starts Price each 1 to 5 Delrin Peek PW1.0-1DL PW1.0-2DL PW1.0-3DL PW1.0-4DL PW1.0-1PK PW1.0-2PK PW1.0-3PK PW1.0-4PK 1 2 3 4 42,11 F 44,39 F 48,99 F 50,47 F On request On request On request On request PSW1.0-1DL PSW1.0-2DL PSW1.0-3DL PSW1.0-4DL PSW1,0-1PK PSW1,0-2PK PSW1,0-3PK PSW1,0-4PK 1 2 3 4 68,12 F 69,84 F 74,77 F 75,86 F On request On request On request On request Shaft worm Dimensions in mm 374 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e25) Worm and wheel set PWG dl Delrin wheel - Quality grade 8e DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 MODULE 1,0 22 10 12 .Options. - Also available in PEEK GF30® ØDe ØDa ØD (Light brown), ask for details - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØA ØM a js8 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW1,0-4DL, wheel PWG1,0-15-4DL DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Theoretical backlash (mm) Torque Price each of Bore 1 to 5 Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) PWG1.0-15-1DL 15 15,00 15 17 18 5 12 0,112 - 0,042 1,03 28,97 F PWG1.0-16-1DL 16 15,50 16 18 19 5 12 0,112 - 0,042 1,16 29,66 F PWG1.0-17-1DL 17 16,00 17 19 20 5 12 0,112 - 0,042 1,29 29,86 F PWG1.0-18-1DL 18 16,50 18 20 21 5 12 0,112 - 0,042 1,43 30,22 F PWG1.0-19-1DL 19 17,00 19 21 22 5 12 0,112 - 0,042 1,57 30,30 F PWG1.0-20-1DL 20 17,50 20 22 23 5 12 0,112 - 0,042 1,73 30,47 F PWG1.0-21-1DL 21 18,00 21 23 24 5 12 0,112 - 0,042 1,88 30,66 F PWG1.0-22-1DL 22 18,50 22 24 25 5 12 0,114 - 0,040 2,05 30,98 F PWG1.0-23-1DL 23 19,00 23 25 26 5 12 0,114 - 0,040 2,22 31,27 F PWG1.0-24-1DL 24 19,50 24 26 27 6 20 0,114 - 0,040 2,40 32,16 F PWG1.0-25-1DL 25 20,00 25 27 28 6 20 0,114 - 0,040 2,58 33,52 F PWG1.0-26-1DL 26 20,50 26 28 29 6 20 0,114 - 0,040 2,77 33,93 F PWG1.0-27-1DL 27 21,00 27 29 30 6 20 0,114 - 0,040 2,96 34,57 F PWG1.0-28-1DL 28 21,50 28 30 31 6 20 0,114 - 0,040 3,16 34,80 F PWG1.0-29-1DL 29 22,00 29 31 32 8 25 0,114 - 0,040 3,37 35,40 F PWG1.0-30-1DL 30 22,50 30 32 33 8 25 0,114 - 0,040 3,58 35,91 F PWG1.0-35-1DL 35 25,00 35 37 38 8 25 0,114 - 0,040 4,72 43,38 F PWG1.0-40-1DL 40 27,50 40 42 43 10 35 0,114 - 0,040 6,00 50,93 F PWG1.0-45-1DL 45 30,00 45 47 48 10 35 0,114 - 0,040 7,42 59,08 F PWG1.0-48-1DL 48 31,50 48 50 51 10 35 0,116 - 0,038 8,34 63,22 F PWG1.0-50-1DL 50 32,50 50 52 53 10 35 0,116 - 0,038 8,97 68,05 F PWG1.0-52-1DL 52 33,50 52 54 55 10 35 0,136 - 0,048 9,63 69,12 F PWG1.0-55-1DL 55 35,00 55 57 58 10 35 0,136 - 0,048 10,65 71,49 F PWG1.0-60-1DL 60 37,50 60 62 63 10 40 0,136 - 0,048 12,45 74,92 F PWG1.0-65-1DL 65 40,00 65 67 68 10 40 0,136 - 0,048 14,38 81,06 F PWG1.0-70-1DL 70 42,50 70 72 73 10 40 0,136 - 0,048 16,44 87,50 F PWG1.0-75-1DL 75 45,00 75 77 78 10 40 0,136 - 0,048 18,61 91,73 F PWG1.0-80-1DL 80 47,50 80 82 83 10 50 0,136 - 0,048 20,90 111,28 F Dimensions in mm Wheels available with 15 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 375 prEcision range (Quality Grade 8e25) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 1,5 Plastic - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø10 H7 Ø23 Ø20 PWDL Bored worm 5 38 2 x M5 to 90° 50 Ø10 h6 Ø14 Ø20 Ø23 38,5 12,5 PSWDL Shaft worm 12,5 38 Part number Delrin Peek Bored worm 73,5 DISCOUNTS 175 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request of starts Price each 1 to 5 Delrin Peek PW1.5-1DL PW1.5-2DL PW1.5-3DL PW1.5-4DL PW1.5-1PK PW1.5-2PK PW1.5-3PK PW1.5-4PK 1 2 3 4 46,77 F 53,55 F 56,01 F 59,85 F On request On request On request On request PSW1.5-1DL PSW1.5-2DL PSW1.5-3DL PSW1.5-4DL PSW1.5-1PK PSW1.5-2PK PSW1.5-3PK PSW1.5-4PK 1 2 3 4 79,46 F 83,81 F 86,29 F 87,30 F On request On request On request On request Shaft worm Dimensions in mm 376 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e25) Worm and wheel set PWG dl Delrin wheel - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 MODULE 1,5 30 15 15 .Options. - Also available in PEEK GF30® ØDe ØDa ØD (Light brown), ask for details - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØA ØM a js8 .Info.. - T  orque figures are for 100 rpm and are given as a guide only - To order, add the number of starts to the part number: e.g. worm PW1,5-4DL, wheel PWG1,5-15-4DL DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Theoretical backlash (mm) Torque Price each of Bore Part number teeth a 1 to 5 ØD ØDa ØDe ØA ØM Max. - Min. (Nm) PWG1.5-15-1DL 15 21,25 22,50 25,50 27,00 6 20 0,114 - 0,040 2,65 41,13 F PWG1.5-16-1DL 16 22,00 24,00 27,00 28,50 6 20 0,114 - 0,040 2,98 42,49 F PWG1.5-17-1DL 17 22,75 25,50 28,50 30,00 6 20 0,114 - 0,040 3,32 43,35 F PWG1.5-18-1DL 18 23,50 27,00 30,00 31,50 6 20 0,114 - 0,040 3,68 43,91 F PWG1.5-19-1DL 19 24,25 28,50 31,50 33,00 6 20 0,114 - 0,040 4,05 44,71 F PWG1.5-20-1DL 20 25,00 30,00 33,00 34,50 6 20 0,114 - 0,040 4,45 45,29 F PWG1.5-21-1DL 21 25,75 31,50 34,50 36,00 8 25 0,114 - 0,040 4,85 46,01 F PWG1.5-22-1DL 22 26,50 33,00 36,00 37,50 8 25 0,114 - 0,040 5,36 46,77 F PWG1.5-23-1DL 23 27,25 34,50 37,50 39,00 8 25 0,114 - 0,040 5,81 47,39 F PWG1.5-24-1DL 24 28,00 36,00 39,00 40,50 8 25 0,114 - 0,040 6,27 48,34 F PWG1.5-25-1DL 25 28,75 37,50 40,50 42,00 8 25 0,114 - 0,040 6,86 49,75 F PWG1.5-26-1DL 26 29,50 39,00 42,00 43,50 8 25 0,114 - 0,040 7,36 50,56 F PWG1.5-27-1DL 27 30,25 40,50 43,50 45,00 8 25 0,117 - 0,038 7,95 51,55 F PWG1.5-28-1DL 28 31,00 42,00 45,00 46,50 8 25 0,117 - 0,038 8,48 52,31 F PWG1.5-29-1DL 29 31,75 43,50 46,50 48,00 10 35 0,117 - 0,038 9,04 53,42 F PWG1.5-30-1DL 30 32,50 45,00 48,00 49,50 10 35 0,117 - 0,038 9,68 54,80 F PWG1.5-35-1DL 35 36,25 52,50 55,50 57,00 10 35 0,137 - 0,048 12,78 68,15 F PWG1.5-40-1DL 40 40,00 60,00 63,00 64,50 12 45 0,137 - 0,048 16,25 83,29 F PWG1.5-45-1DL 45 43,75 67,50 70,50 72,00 12 45 0,137 - 0,048 20,40 104,13 F 45 0,137 - 0,048 22,92 116,93 F PWG1.5-48-1DL 48 46,00 72,00 75,00 76,50 12 55 0,137 - 0,048 25,05 125,82 F PWG1.5-50-1DL 50 47,50 75,00 78,00 79,50 14 55 0,139 - 0,045 29,74 149,71 F PWG1.5-55-1DL 55 51,25 82,50 85,50 87,00 14 55 0,139 - 0,045 34,78 175,53 F PWG1.5-60-1DL 60 55,00 90,00 93,00 94,50 14 55 0,139 - 0,045 41,71 200,56 F PWG1.5-65-1DL 65 58,75 97,50 100,50 102,00 14 65 0,139 - 0,045 47,66 230,14 F PWG1.5-70-1DL 70 62,50 105,00 108,00 109,50 16 65 0,139 - 0,045 53,96 261,61 F PWG1.5-75-1DL 75 66,25 112,50 115,50 117,00 16 65 0,139 - 0,045 57,91 281,60 F PWG1.5-78-1DL 78 68,50 117,00 120,00 121,50 16 65 0,139 - 0,045 60,66 295,22 F PWG1.5-80-1DL 80 70,00 120,00 123,00 124,50 16 Dimensions in mm Wheels available with 15 to 80 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 377 prEcision range (Quality Grade 8e25) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 2,0 Plastic - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø15 H7 Ø29 Ø25 PWDL Bored worm 6 45 2 x M6 to 90° 60 Ø15 h6 Ø19 Ø25 Ø29 35 12,5 PSWDL Shaft worm Part number Delrin Peek Bored worm 12,5 45 80 185 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request of starts Price each 1 to 5 Delrin Peek PW2.0-1DL PW2.0-2DL PW2.0-3DL PW2.0-4DL PW2.0-1PK PW2.0-2PK PW2.0-3PK PW2.0-4PK 1 2 3 4 71,23 F 76,50 F 82,18 F 90,35 F On request On request On request On request PSW2.0-1DL PSW2.0-2DL PSW2.0-3DL PSW2.0-4DL PSW2.0-1PK PSW2.0-2PK PSW2.0-3PK PSW2.0-4PK 1 2 3 4 108,01 F 114,66 F 117,12 F 124,21 F On request On request On request On request Shaft worm Dimensions in mm 378 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e25) Worm and wheel set PWG dl Delrin wheel - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 MODULE 2,0 40 20 20 .Options. - Also available in PEEK GF30® ØDe ØDa ØD (Light brown), ask for details - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØA ØM a js8 .Info.. - T  orque figures are for 100 rpm and are given DISCOUNTS as a guide only Qty. 1+ 6+ 19+ 50+ - To order, add the number of starts to the part number: Disc. List. -5% -10% On request e.g. worm PW2,0-4DL, wheel PWG2,0-15-4DL Theoretical backlash (mm) Torque Price each of Bore Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 1 to 5 PWG2.0-15-1DL 15 27,50 30 34 36 10 25 0,114 - 0,040 5,65 80,65 F PWG2.0-16-1DL 16 28,50 32 36 38 10 25 0,114 - 0,040 6,35 85,28 F PWG2.0-17-1DL 17 29,50 34 38 40 10 25 0,114 - 0,040 7,08 86,90 F PWG2.0-18-1DL 18 30,50 36 40 42 10 25 0,117 - 0,038 7,85 88,52 F PWG2.0-19-1DL 19 31,50 38 42 44 10 25 0,117 - 0,038 8,65 90,18 F PWG2.0-20-1DL 20 32,50 40 44 46 10 25 0,117 - 0,038 9,65 91,83 F PWG2.0-21-1DL 21 33,50 42 46 48 12 35 0,117 - 0,038 10,53 97,00 F PWG2.0-22-1DL 22 34,50 44 48 50 12 35 0,117 - 0,038 11,64 102,81 F 50 52 12 35 0,117 - 0,038 12,81 105,65 F PWG2.0-23-1DL 23 35,50 46 52 54 12 35 0,117 - 0,038 14,05 108,34 F PWG2.0-24-1DL 24 36,50 48 54 56 12 35 0,117 - 0,038 15,12 111,19 F PWG2.0-25-1DL 25 37,50 50 56 58 12 35 0,137 - 0,048 16,23 113,88 F PWG2.0-26-1DL 26 38,50 52 58 60 12 35 0,137 - 0,048 17,37 114,77 F PWG2.0-27-1DL 27 39,50 54 60 62 12 35 0,137 - 0,048 18,54 116,62 F PWG2.0-28-1DL 28 40,50 56 62 64 14 50 0,137 - 0,048 19,75 118,45 F PWG2.0-29-1DL 29 41,50 58 64 66 14 50 0,137 - 0,048 20,99 119,39 F PWG2.0-30-1DL 30 42,50 60 68 70 14 50 0,137 - 0,048 23,58 145,53 F PWG2.0-32-1DL 32 44,50 64 74 76 14 50 0,137 - 0,048 27,71 168,81 F PWG2.0-35-1DL 35 47,50 70 80 82 14 50 0,139 - 0,045 32,13 168,81 F PWG2.0-38-1DL 38 50,50 76 84 86 14 50 0,139 - 0,045 35,23 185,24 F PWG2.0-40-1DL 40 52,50 80 88 90 14 50 0,139 - 0,045 38,47 202,51 F PWG2.0-42-1DL 42 54,50 84 94 96 14 50 0,139 - 0,045 44,23 229,74 F PWG2.0-45-1DL 45 57,50 90 50 0,139 - 0,045 49,68 257,21 F PWG2.0-48-1DL 48 60,50 96 100 102 14 65 0,139 - 0,045 53,47 277,35 F PWG2.0-50-1DL 50 62,50 100 104 106 16 16 65 0,139 - 0,045 57,38 298,29 F PWG2.0-52-1DL 52 64,50 104 108 110 116 16 65 0,139 - 0,045 63,48 327,94 F PWG2.0-55-1DL 55 67,50 110 114 65 0,139 - 0,045 69,84 362,18 F PWG2.0-58-1DL 58 70,50 116 120 122 16 65 0,139 - 0,045 76,52 385,90 F PWG2.0-60-1DL 60 72,50 120 124 126 16 Dimensions in mm Wheels available with 15 to 60 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 379 prEcision range (Quality Grade 8e25) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 2,5 Plastic - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø15 H7 Ø40 Ø35 PWDL Bored worm 6,5 50 2 x M6 to 90° 65 Ø15 h6 Ø20 Ø35 Ø40 40 12,5 PSWDL Shaft worm Part number Delrin Peek Bored worm 12,5 50 85 200 DISCOUNTS of starts Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Price each 1 to 5 Delrin Peek PW2.5-1DL PW2.5-2DL PW2.5-3DL PW2.5-4DL PW2.5-1PK PW2.5-2PK PW2.5-3PK PW2.5-4PK 1 2 3 4 110,25 F 117,65 F 122,38 F 126,58 F On request On request On request On request PSW2.5-1DL PSW2.5-2DL PSW2.5-3DL PSW2.5-4DL PSW2.5-1PK PSW2.5-2PK PSW2.5-3PK PSW2.5-4PK 1 2 3 4 162,05 F 168,70 F 175,46 F 183,51 F On request On request On request On request Shaft worm Dimensions in mm 380 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e25) Worm and wheel set PWG dl MODULE 2,5 Delrin wheel 50 25 25 - Quality grade 8e DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 .Options. - Also available in PEEK GF30® (Light brown), ask for details - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW2,5-4DL, wheel PWG2,5-15-4DL DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Theoretical backlash (mm) Torque Price each of Bore Part number teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 1 to 5 PWG2.5-15-1DL 15 36,25 37,50 42,50 45,00 10 30 0,116 - 0,038 11,19 90,62 F PWG2.5-16-1DL 16 37,50 40,00 45,00 47,50 10 30 0,116 - 0,038 12,57 92,60 F PWG2.5-17-1DL 17 38,75 42,50 47,50 50,00 10 30 0,116 - 0,038 14,26 94,54 F PWG2.5-18-1DL 18 40,00 45,00 50,00 52,50 10 30 0,116 - 0,038 15,81 100,10 F PWG2.5-19-1DL 19 41,25 47,50 52,50 55,00 10 30 0,116 - 0,038 17,42 105,63 F PWG2.5-20-1DL 20 42,50 50,00 55,00 57,50 10 30 0,116 - 0,038 19,43 111,22 F PWG2.5-21-1DL 21 43,75 52,50 57,50 60,00 12 45 0,137 - 0,048 21,21 113,96 F PWG2.5-22-1DL 22 45,00 55,00 60,00 62,50 12 45 0,137 - 0,048 23,06 116,23 F PWG2.5-23-1DL 23 46,25 57,50 62,50 65,00 12 45 0,137 - 0,048 24,99 120,77 F PWG2.5-24-1DL 24 47,50 60,00 65,00 67,50 12 45 0,137 - 0,048 26,98 122,32 F PWG2.5-25-1DL 25 48,75 62,50 67,50 70,00 12 45 0,137 - 0,048 29,03 123,63 F PWG2.5-26-1DL 26 50,00 65,00 70,00 72,50 12 45 0,137 - 0,048 31,67 124,99 F PWG2.5-27-1DL 27 51,25 67,50 72,50 75,00 12 45 0,139 - 0,045 33,90 126,02 F PWG2.5-28-1DL 28 52,50 70,00 75,00 77,50 12 45 0,139 - 0,045 36,19 126,76 F PWG2.5-29-1DL 29 53,75 72,50 77,50 80,00 14 55 0,139 - 0,045 38,55 128,07 F PWG2.5-30-1DL 30 55,00 75,00 80,00 82,50 14 55 0,139 - 0,045 41,99 129,10 F PWG2.5-32-1DL 32 57,50 80,00 85,00 87,50 14 55 0,139 - 0,045 47,16 158,08 F PWG2.5-35-1DL 35 61,25 87,50 92,50 95,00 14 55 0,139 - 0,045 55,41 175,75 F PWG2.5-38-1DL 38 65,00 95,00 100,00 102,50 14 55 0,139 - 0,045 64,77 205,46 F PWG2.5-40-1DL 40 67,50 100,00 105,00 107,50 14 55 0,139 - 0,045 71,03 229,63 F PWG2.5-42-1DL 42 70,00 105,00 110,00 112,50 16 65 0,139 - 0,045 78,78 256,93 F PWG2.5-45-1DL 45 73,75 112,50 117,50 120,00 16 65 0,139 - 0,045 89,20 284,21 F PWG2.5-48-1DL 48 77,50 120,00 125,00 127,50 16 65 0,139 - 0,045 100,47 314,80 F Dimensions in mm Wheels available with 15 to 48 teeth +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 381 prEcision range (Quality Grade 8e25) PW dl Worm and wheel set Worm: Delrin or Peek PSW dl MODULE 3,0 Plastic - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) PEEK GF30® (Light brown) - Tooth thickness conforms to DIN 3967 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Ø20 H7 Ø46 Ø40 PWDL Bored worm 7 55 2 x M8 to 90° 70 Ø20 h6 Ø27 Ø40 Ø46 45 12,5 PSWDL Shaft worm Part number Delrin Peek Bored worm 12,5 55 90 215 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request of starts Price each 1 to 5 Delrin Peek PW3.0-1DL PW3.0-2DL PW3.0-3DL PW3.0-4DL PW3.0-1PK PW3.0-2PK PW3.0-3PK PW3.0-4PK 1 2 3 4 129,26 F 133,68 F 137,55 F 142,92 F On request On request On request On request PSW3.0-1DL PSW3.0-2DL PSW3.0-3DL PSW3.0-4DL PSW3.0-1PK PSW3.0-2PK PSW3.0-3PK PSW3.0-4PK 1 2 3 4 184,96 F 196,24 F 204,62 F 212,65 F On request On request On request On request Shaft worm Dimensions in mm 382 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision range (Quality Grade 8e25) Worm and wheel set PWG dl MODULE 3,0 Delrin wheel 60 30 30 - Quality grade 8e25 DIN 3974 - Pressure angle: 20° - Material: Delrin POM (White) - Tooth thickness conforms to DIN 3967 .Options. - Also available in PEEK GF30® (Light brown), ask for details - Alternative bores (H7) - Keyway conforming to DIN6885 (JS9) - Tapped hole - Hole for dowel pin ØDe ØDa ØD ØA ØM a js8 .Info.. - T  orque figures are for 100 rpm and are given as a guide only. - To order, add the number of starts to the part number: e.g. worm PW3,0-4DL, wheel PWG3,0-15-4DL DISCOUNTS Part number PWG3.0-15-1DL PWG3.0-16-1DL PWG3.0-17-1DL PWG3.0-18-1DL PWG3.0-19-1DL PWG3.0-20-1DL PWG3.0-21-1DL PWG3.0-22-1DL PWG3.0-23-1DL PWG3.0-24-1DL PWG3.0-25-1DL PWG3.0-26-1DL PWG3.0-27-1DL PWG3.0-28-1DL PWG3.0-29-1DL PWG3.0-30-1DL PWG3.0-32-1DL PWG3.0-35-1DL PWG3.0-38-1DL PWG3.0-40-1DL Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Theoretical backlash (mm) Torque Price each of Bore 1 to 5 teeth a ØD ØDa ØDe ØA ØM Max. - Min. (Nm) 15 42,50 45 51 54 12 35 0,117 - 0,038 16,60 95,83 F 16 44,00 48 54 57 12 35 0,117 - 0,038 18,64 99,49 F 17 45,50 51 57 60 12 35 0,137 - 0,048 20,79 105,70 F 18 47,00 54 60 63 12 35 0,137 - 0,048 23,04 111,95 F 19 48,50 57 63 66 12 35 0,137 - 0,048 25,87 118,11 F 20 50,00 60 66 69 12 35 0,137 - 0,048 28,37 121,09 F 21 51,50 63 69 72 14 50 0,139 - 0,045 31,53 130,59 F 22 53,00 66 72 75 14 50 0,139 0,045 34,29 136,83 F 23 54,50 69 75 78 14 50 0,139 - 0,045 37,14 141,32 F 24 56,00 72 78 81 14 50 0,139 - 0,045 40,82 143,34 F 25 57,50 75 81 84 14 50 0,139 - 0,045 43,93 145,82 F 26 59,00 78 84 87 14 50 0,139 - 0,045 47,14 166,56 F 27 60,50 81 87 90 14 50 0,139 - 0,045 50,90 178,53 F 28 62,00 84 90 93 14 50 0,139 - 0,045 54,34 192,38 F 29 63,50 87 93 96 16 65 0,139 - 0,045 58,39 201,34 F 30 65,00 90 96 99 16 65 0,139 - 0,045 62,06 209,94 F 32 68,00 96 102 105 16 65 0,139 - 0,045 69,71 248,25 F 35 72,50 105 111 114 16 65 0,139 - 0,045 81,91 285,86 F 38 77,00 114 120 123 16 65 0,139 - 0,045 98,25 322,45 F 40 80,00 120 126 129 16 65 0,139 - 0,045 107,75 373,38 F Wheels available with 15 to 40 teeth Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 383 n o i s ci ks 7 e r P rac .38 -p 6 8 p.3 Rack p.386 prEcision Range (Quality Grade 8) PGRS Square gear rack Steel - Quality grade 8 ISO 1328 - Pressure angle: 20° - Teeth profile conforms to DIN 867 - Material: Steel C40 - Straightness: 1.0mm/1000mm - Total pitch deviation: 0.10mm .Info.. - A  ll racks are cut starting at half tooth spacing - Racks cut for butt joining finish at half tooth spacing. H π - mn 4 P B W A DISCOUNTS Part number Full length Qty. 1+ 10+ 25+ 50+ Disc. List. -5% -10% On request H W Length (mm) Price each Module (+/-0,05) P (+/-0,05) A B 1 to 9 PGRS0.5-600A PGRS1.0-600A PGRS1.5-600A PGRS1.5-1200A PGRS2.0-600A PGRS2.0-1200A PGRS2.5-600A PGRS2.5-1200A PGRS3.0-600A PGRS3.0-1200A 0,5 1,0 1,5 1,5 2,0 2,0 2,5 2,5 3,0 3,0 10 10 15 15 20 20 25 25 30 30 9,50 9,00 13,50 13,50 18,00 18,00 22,50 22,50 27,00 27,00 10 10 15 15 20 20 25 25 30 30 PGRS0.5-600B PGRS1.0-600B PGRS1.5-600B PGRS1.5-1200B PGRS2.0-600B PGRS2.0-1200B PGRS2.5-600B PGRS2.5-1200B PGRS3.0-600B PGRS3.0-1200B 0,5 1,0 1,5 1,5 2,0 2,0 2,5 2,5 3,0 3,0 10 10 15 15 20 20 25 25 30 30 9,50 9,00 13,50 13,50 18,00 18,00 22,50 22,50 27,00 27,00 10 10 15 15 20 20 25 25 30 30 Cut for but joining Dimensions in mm 386 4 Volume  4 2013 HPC 600 +/-0,25 600 +/-0,25 600 +/-0,25 1200 +/-0,25 600 +/-0,25 1200 +/-0,25 600 +/-0,25 1200 +/-0,25 600 +/-0,25 1200 +/-0,25 - - - - - - - - - - - - - - - - - - - - 598 +/-0,1 596 +/-0,1 598 +/-0,1 1196 +/-0,1 596 +/-0,1 1193 +/-0,1 596 +/-0,1 1193 +/-0,1 593 +/-0,1 1196 +/-0,1 159,77 F 159,13 F 159,13 F 239,70 F 182,02 F 285,78 F 219,97 F 361,48 F 266,10 F 453,87 F 186,39 F 185,80 F 190,55 F 270,42 F 214,94 F 318,69 F 258,84 F 400,38 F 311,88 F 499,63 F www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 8) Round gear rack PGRR Stainless steel - Quality grade 8 ISO 1328 - Pressure angle: 20° - Teeth profile conforms to DIN 867 - Material: Stainless steel 303 - Straightness: 0.5mm/400mm - Total pitch deviation: 0.1mm - Surface finish on diameter: 0.4Ra .Info.. - A  ll racks are cut starting at half tooth spacing - Racks cut for butt joining finish at half tooth spacing. π Ød h6 H - mn 4 P B A DISCOUNTS Part number Full length H Module (+/-0,05) P Ød (h6) Qty. 1+ 10+ 25+ 50+ Disc. List. -5% -10% On request Length (mm) Price each A B 1 to 9 PGRR0.5-400A PGRR1.0-400A PGRR1.5-400A PGRR2.0-400A PGRR2.5-400A PGRR3-400A 0,5 1,0 1,5 2,0 2,5 3,0 7,50 9,00 13,50 18,00 22,50 27,00 7,00 8,00 12,00 16,00 20,00 24,00 8 10 15 20 25 30 400 400 400 400 400 400 PGRR0.5-400B PGRR1.0-400B PGRR1.5-400B PGRR2.0-400B PGRR2.5-400B PGRR3-400B 0,5 1,0 1,5 2,0 2,5 3,0 7,50 9,00 13,50 18,00 22,50 27,00 7,00 8,00 12,00 16,00 20,00 24,00 8 10 15 20 25 30 - - - - - - Cut for but joining Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC - - - - - - 204,51 F 221,24 F 317,46 F 390,78 F 494,31 F 596,65 F 398 +/-0,1 398 +/-0,1 395 +/-0,1 395 +/-0,1 392 +/-0,1 395 +/-0,1 231,16 F 247,90 F 348,18 F 423,70 F 533,19 F 642,40 F +/-0,25 +/-0,25 +/-0,25 +/-0,25 +/-0,25 +/-0,25 Volume 4 2013 4 387 n o i s i ars c e Pr r ge .437 spu 390-p p. Pinion shaft p.390 Spur gear p.396 Spur gear p.424 prEcision Range (Quality Grade 7e) Pinion shaft MODULE 0,5 Pre-treated or stainless steel - Quality grade 7e DIN 58405 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCF6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Quality Ø6h6 Ø7,5 10 5 e grade 7 ØP ØD 30 2,5 2,5 50 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Steel Stainless steel PPS0.5-18 PPS0.5-18S PPS0.5-19 PPS0.5-19S PPS0.5-20 PPS0.5-20S PPS0.5-21 PPS0.5-21S PPS0.5-22 PPS0.5-22S PPS0.5-23 PPS0.5-23S PPS0.5-24 PPS0.5-24S PPS0.5-25 PPS0.5-25S PPS0.5-26 PPS0.5-26S PPS0.5-27 PPS0.5-27S PPS0.5-28 PPS0.5-28S PPS0.5-29 PPS0.5-29S PPS0.5-30 PPS0.5-30S Dimensions in mm Z Teeth 18 19 20 21 22 23 24 25 26 27 28 29 30 390 4 Volume  4 2013 ØP Pitch 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 HPC ØD External 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 15,5 16,0 Steel 0,25 0,27 0,36 0,37 0,39 0,41 0,43 0,44 0,54 0,57 0,59 0,61 0,69 Torque (Nm) Weight Price each 1 to 5 Stainless steel (kg) Steel Stainless steel 0,15 0,013 65,50 F 141,43 F 0,16 0,013 66,27 F 143,04 F 0,21 0,014 67,51 F 145,77 F 0,22 0,014 68,18 F 147,20 F 0,23 0,014 69,07 F 149,15 F 0,25 0,015 69,93 F 150,90 F 0,26 0,015 70,71 F 152,70 F 0,27 0,015 71,45 F 154,29 F 0,33 0,016 72,54 F 156,52 F 0,34 0,016 73,25 F 158,14 F 0,35 0,017 74,04 F 159,77 F 0,36 0,017 74,43 F 160,74 F 0,41 0,017 74,72 F 161,34 F www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 7e25) Pinion shaft MODULE 1,0 Pre-treated or stainless steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 25 rade 7e g Quality Ø10h6 Ø14 15 10 2,5 ØP ØD 55 2,5 85 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Steel Stainless steel Teeth PPS1.0-18 PPS1.0-18S 18 PPS1.0-19 PPS1.0-19S 19 PPS1.0-20 PPS1.0-20S 20 PPS1.0-21 PPS1.0-21S 21 PPS1.0-22 PPS1.0-22S 22 PPS1.0-23 PPS1.0-23S 23 PPS1.0-24 PPS1.0-24S 24 PPS1.0-25 PPS1.0-25S 25 PPS1.0-26 PPS1.0-26S 26 PPS1.0-27 PPS1.0-27S 27 PPS1.0-28 PPS1.0-28S 28 PPS1.0-29 PPS1.0-29S 29 PPS1.0-30 PPS1.0-30S 30 Dimensions in mm ØP Pitch 18 19 20 21 22 23 24 25 26 27 28 29 30 ØD Torque (Nm) Weight Price each 1 to 5 External Steel Stainless steel (kg) Steel Stainless steel 20 1,8 1,1 0,069 70,05 F 151,19 F 21 1,9 1,1 0,071 71,11 F 153,51 F 22 2,5 1,5 0,074 73,39 F 158,46 F 23 2,6 1,6 0,076 73,86 F 159,46 F 24 2,7 1,6 0,079 74,94 F 161,77 F 25 2,8 1,7 0,081 75,27 F 162,43 F 26 3,0 1,8 0,084 75,72 F 163,43 F 27 3,1 1,9 0,087 78,87 F 170,19 F 28 3,8 2,3 0,090 81,68 F 176,31 F 29 3,9 2,4 0,094 83,37 F 179,96 F 30 4,1 2,4 0,097 85,20 F 183,93 F 31 4,2 2,5 0,100 87,44 F 188,73 F 32 4,8 2,9 0,104 88,89 F 191,87 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 391 prEcision Range (Quality Grade 7e25) Pinion shaft MODULE 1,5 Pre-treated or stainless steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Quality Ø15h6 Ø19 20 15 2,5 e25 grade 7 ØP ØD 80 2,5 120 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Steel Stainless steel Teeth PPS1.5-16 PPS1.5-16S 16 PPS1.5-18 PPS1.5-18S 18 PPS1.5-19 PPS1.5-19S 19 PPS1.5-20 PPS1.5-20S 20 PPS1.5-21 PPS1.5-21S 21 PPS1.5-22 PPS1.5-22S 22 PPS1.5-23 PPS1.5-23S 23 PPS1.5-24 PPS1.5-24S 24 PPS1.5-25 PPS1.5-25S 25 PPS1.5-26 PPS1.5-26S 26 PPS1.5-27 PPS1.5-27S 27 PPS1.5-28 PPS1.5-28S 28 PPS1.5-29 PPS1.5-29S 29 PPS1.5-30 PPS1.5-30S 30 ØP Pitch 24,0 27,0 28,5 30,0 31,5 33,0 34,5 36,0 37,5 39,0 40,5 42,0 43,5 45,0 ØD External 27,0 30,0 31,5 33,0 34,5 36,0 37,5 39,0 40,5 42,0 43,5 45,0 46,5 48,0 392 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Dimensions in mm Torque (Nm) Weight Price each 1 to 5 Steel Stainless steel (kg) Steel Stainless steel 4,9 2,7 0,203 80,42 F 156,73 F 5,5 3,3 0,216 84,36 F 162,43 F 5,8 3,5 0,224 87,52 F 168,55 F 7,7 4,6 0,232 91,95 F 177,09 F 8,1 4,9 0,240 92,76 F 178,57 F 8,5 5,1 0,249 93,82 F 180,61 F 8,9 5,3 0,259 95,50 F 183,83 F 9,3 5,6 0,268 96,43 F 185,66 F 9,6 5,8 0,278 101,43 F 195,24 F 11,8 7,1 0,289 106,29 F 204,62 F 12,2 7,3 0,300 109,58 F 210,98 F 12,7 7,6 0,311 112,68 F 216,97 F 13,2 7,9 0,323 114,46 F 220,32 F 15,0 9,0 0,335 117,89 F 226,97 F prEcision Range (Quality Grade 7e25) Pinion shaft MODULE 2,0 Pre-treated or stainless steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 25 rade 7e g Quality Ø20h6 Ø24 20 20 2,5 ØP ØD 100 2,5 145 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Steel Stainless steel Teeth PPS2.0-16 PPS2.0-16S 16 PPS2.0-18 PPS2.0-18S 18 PPS2.0-19 PPS2.0-19S 19 PPS2.0-20 PPS2.0-20S 20 PPS2.0-21 PPS2.0-21S 21 PPS2.0-22 PPS2.0-22S 22 PPS2.0-23 PPS2.0-23S 23 PPS2.0-24 PPS2.0-24S 24 PPS2.0-25 PPS2.0-25S 25 PPS2.0-26 PPS2.0-26S 26 PPS2.0-27 PPS2.0-27S 27 PPS2.0-28 PPS2.0-28S 28 PPS2.0-29 PPS2.0-29S 29 PPS2.0-30 PPS2.0-30S 30 Dimensions in mm ØP Pitch 32 36 38 40 42 44 46 48 50 52 54 56 58 60 ØD External 36 40 42 44 46 48 50 52 54 56 58 60 62 64 +33(0)4 37 490 055 - cial2@hpceurope.com Torque (Nm) Weight Price each 1 to 5 Steel Stainless steel (kg) Steel Stainless steel 11,4 6,9 0,439 96,67 F 208,68 F 12,3 7,4 0,472 101,97 F 196,31 F 13,0 7,8 0,490 104,29 F 200,78 F 17,3 10,4 0,509 106,45 F 204,94 F 18,1 10,9 0,529 109,29 F 210,40 F 19,0 11,4 0,550 110,96 F 213,66 F 19,8 11,9 0,571 113,33 F 218,14 F 20,7 12,4 0,594 115,79 F 222,93 F 21,6 12,9 0,618 122,25 F 235,37 F 26,4 15,8 0,643 126,16 F 242,93 F 27,4 16,4 0,669 130,63 F 251,52 F 28,4 17,1 0,696 133,50 F 256,95 F 29,4 17,7 0,724 136,83 F 263,42 F 33,5 20,1 0,753 139,82 F 269,18 F HPC Volume 4 2013 4 393 prEcision Range (Quality Grade 7e25) Pinion shaft MODULE 2,5 Pre-treated or stainless steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. Quality Ø20h6 Ø27 25 25 5 e25 grade 7 ØP ØD 100 5 160 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Steel Stainless steel Teeth PPS2.5-14 PPS2.5-14S 14 PPS2.5-16 PPS2.5-16S 16 PPS2.5-18 PPS2.5-18S 18 PPS2.5-19 PPS2.5-19S 19 PPS2.5-20 PPS2.5-20S 20 PPS2.5-21 PPS2.5-21S 21 PPS2.5-22 PPS2.5-22S 22 PPS2.5-23 PPS2.5-23S 23 PPS2.5-24 PPS2.5-24S 24 PPS2.5-25 PPS2.5-25S 25 Dimensions in mm 394 4 Volume  4 2013 ØP Pitch 35,0 40,0 45,0 47,5 50,0 52,5 55,0 57,5 60,0 62,5 HPC ØD External 40,0 45,0 50,0 52,5 55,0 57,5 60,0 62,5 65,0 67,5 Torque (Nm) Weight Price each 1 to 5 Steel Stainless steel (kg) Steel Stainless steel 17,6 9,4 0,540 121,14 F 261,53 F 19,8 11,7 0,597 126,14 F 272,23 F 22,9 13,8 0,662 129,79 F 280,17 F 24,2 14,5 0,697 133,28 F 287,69 F 32,2 19,3 0,734 138,16 F 298,22 F 33,8 20,3 0,773 141,51 F 305,39 F 35,5 21,3 0,814 146,59 F 316,37 F 37,1 22,2 0,857 150,26 F 324,36 F 38,7 23,2 0,901 154,67 F 333,88 F 40,3 24,2 0,948 163,09 F 352,01 F www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 7e25) Pinion shaft MODULE 3,0 Pre-treated or stainless steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Pressure angle: 20° - Material: Pre-treated steel 35NCD6, 28 HRC Stainless steel 303 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Info.. - T  orque figures are for 100 rpm and are given as a guide only. 25 rade 7e g Quality Ø25h6 Ø30 30 30 5 ØP ØD 125 5 195 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Steel Stainless steel Teeth PPS3.0-14 PPS3.0-14S 14 PPS3.0-16 PPS3.0-16S 16 PPS3.0-18 PPS3.0-18S 18 PPS3.0-19 PPS3.0-19S 19 PPS3.0-20 PPS3.0-20S 20 PPS3.0-21 PPS3.0-21S 21 PPS3.0-22 PPS3.0-22S 22 PPS3.0-23 PPS3.0-23S 23 PPS3.0-24 PPS3.0-24S 24 PPS3.0-25 PPS3.0-25S 25 Dimensions in mm ØP Pitch 42 48 54 57 60 63 66 69 72 75 ØD External 48 54 60 63 66 69 72 75 78 81 +33(0)4 37 490 055 - cial2@hpceurope.com Torque (Nm) Weight Steel Stainless steel (kg) 31,6 17,3 0,976 34,1 19,5 1,074 38,2 22,9 1,186 40,3 24,2 1,246 53,7 32,2 1,311 56,4 33,8 1,378 59,1 35,4 1,449 61,8 37,1 1,523 64,4 38,7 1,600 67,1 40,3 1,681 HPC Price each 1 to 5 Steel Stainless steel 134,74 F 330,20 F 138,60 F 339,58 F 144,84 F 354,83 F 150,24 F 368,13 F 155,20 F 380,22 F 160,28 F 392,68 F 165,78 F 406,16 F 171,08 F 419,15 F 175,92 F 431,08 F 186,56 F 457,18 F Volume 4 2013 4 395 prEcision Range (Quality Grade 7e) Spur gear MODULE 0.5 Pre-treated or case hardened steel - Quality grade 7e DIN 58405 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. Part number Z Standard Hardened Teeth PSG0.5-20 PSG0.5-20H 20 PSG0.5-21 PSG0.5-21H 21 PSG0.5-22 PSG0.5-22H 22 PSG0.5-23 PSG0.5-23H 23 PSG0.5-24 PSG0.5-24H 24 PSG0.5-25 PSG0.5-25H 25 PSG0.5-26 PSG0.5-26H 26 PSG0.5-27 PSG0.5-27H 27 PSG0.5-28 PSG0.5-28H 28 PSG0.5-29 PSG0.5-29H 29 PSG0.5-30 PSG0.5-30H 30 PSG0.5-32 PSG0.5-32H 32 PSG0.5-35 PSG0.5-35H 35 PSG0.5-38 PSG0.5-38H 38 PSG0.5-40 PSG0.5-40H 40 PSG0.5-42 PSG0.5-42H 42 PSG0.5-45 PSG0.5-45H 45 PSG0.5-48 PSG0.5-48H 48 PSG0.5-50 PSG0.5-50H 50 PSG0.5-52 PSG0.5-52H 52 PSG0.5-55 PSG0.5-55H 55 PSG0.5-58 PSG0.5-58H 58 PSG0.5-60 PSG0.5-60H 60 Dimensions in mm ØP Pitch 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 16,0 17,5 19,0 20,0 21,0 22,5 24,0 25,0 26,0 27,5 29,0 30,0 396 4 Volume  4 2013 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request ØD ØA ØM Backlash Torque (Nm) External Bore Boss (mm) Standard Hardened 11,0 4 8 0,076 - 0,037 0,36 1,11 11,5 4 8 0,077 - 0,036 0,37 1,16 12,0 4 8 0,077 - 0,036 0,39 1,22 12,5 4 8 0,077 - 0,036 0,41 1,27 13,0 5 10 0,077 - 0,036 0,43 1,33 13,5 5 10 0,087 - 0,042 0,44 1,38 14,0 5 10 0,087 - 0,042 0,54 1,44 14,5 5 10 0,087 - 0,042 0,57 1,50 15,0 5 10 0,087 - 0,042 0,59 1,55 15,5 6 13 0,087 - 0,042 0,61 1,61 16,0 6 13 0,087 - 0,042 0,69 1,65 17,0 6 13 0,087 - 0,042 0,74 1,76 18,5 6 13 0,087 - 0,042 0,81 1,93 20,0 6 17 0,089 - 0,041 0,87 2,09 21,0 6 17 0,089 - 0,041 1,18 2,45 22,0 6 17 0,089 - 0,041 1,24 2,57 23,5 6 17 0,089 - 0,041 1,32 2,75 25,0 6 17 0,089 - 0,041 1,41 2,94 26,0 6 17 0,089 - 0,041 1,74 3,32 27,0 6 17 0,097 - 0,046 1,81 3,45 28,5 6 17 0,097 - 0,046 1,92 3,65 30,0 6 17 0,097 - 0,046 2,02 3,85 31,0 6 17 0,097 - 0,046 2,49 4,15 HPC e grade 7 Weight Price each 1 to 5 (kg) Standard Hardened 0,006 26,99 F 44,55 F 0,006 27,26 F 45,00 F 0,006 27,61 F 45,60 F 0,006 27,94 F 46,16 F 0,008 28,27 F 46,67 F 0,009 28,54 F 47,15 F 0,009 28,97 F 47,83 F 0,009 29,28 F 48,34 F 0,010 29,59 F 48,87 F 0,013 29,77 F 49,14 F 0,014 29,86 F 49,33 F 0,015 30,61 F 50,50 F 0,016 31,63 F 52,22 F 0,026 32,58 F 53,82 F 0,027 33,32 F 54,99 F 0,028 33,91 F 55,98 F 0,030 34,95 F 57,69 F 0,032 36,35 F 59,95 F 0,034 36,73 F 60,58 F 0,035 37,29 F 61,47 F 0,038 38,01 F 62,79 F 0,040 38,79 F 64,06 F 0,042 39,23 F 64,72 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA ØM 5 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PSG0.5-62 PSG0.5-62H 62 31,0 PSG0.5-65 PSG0.5-65H 65 32,5 PSG0.5-68 PSG0.5-68H 68 34,0 PSG0.5-70 PSG0.5-70H 70 35,0 PSG0.5-72 PSG0.5-72H 72 36,0 PSG0.5-75 PSG0.5-75H 75 37,5 PSG0.5-78 PSG0.5-78H 78 39,0 PSG0.5-80 PSG0.5-80H 80 40,0 PSG0.5-82 PSG0.5-82H 82 41,0 PSG0.5-85 PSG0.5-85H 85 42,5 PSG0.5-90 PSG0.5-90H 90 45,0 PSG0.5-100 PSG0.5-100H 100 50,0 PSG0.5-120 PSG0.5-120H 120 60,0 PSG0.5-130 PSG0.5-130H 130 65,0 PSG0.5-140 PSG0.5-140H 140 70,0 PSG0.5-150 PSG0.5-150H 150 75,0 PSG0.5-200 PSG0.5-200H 200 100,0 PSG0.5-250 PSG0.5-250H 250 125,0 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 32,0 8 20 0,098 - 0,044 33,5 8 20 0,098 - 0,044 35,0 8 20 0,098 - 0,044 36,0 8 20 0,098 - 0,044 37,0 8 20 0,098 - 0,044 38,5 8 20 0,098 - 0,044 40,0 8 20 0,098 - 0,044 41,0 8 25 0,098 - 0,044 42,0 8 25 0,098 - 0,044 43,5 8 25 0,098 - 0,044 46,0 8 25 0,098 - 0,044 51,0 10 30 0,098 - 0,044 61,0 10 35 0,111 - 0,049 66,0 10 35 0,111 - 0,049 71,0 10 35 0,111 - 0,049 76,0 10 40 0,111 - 0,049 101,0 14 50 0,113 - 0,047 126,0 16 60 0,136 - 0,062 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Standard Hardened (kg) 2,57 4,29 0,048 2,70 4,50 0,051 2,82 4,70 0,054 2,91 4,84 0,056 2,99 4,98 0,058 3,11 5,19 0,062 3,24 5,40 0,065 3,71 5,80 0,082 3,81 5,95 0,084 3,95 6,16 0,088 4,18 6,53 0,095 4,75 7,42 0,123 5,70 8,90 0,177 6,17 9,65 0,196 6,65 10,39 0,217 7,28 11,37 0,262 9,80 15,32 0,444 12,25 19,15 0,679 Price each 1 to 5 Standard Hardened 39,69 F 65,52 F 40,56 F 66,97 F 40,84 F 67,39 F 41,27 F 68,15 F 41,69 F 68,77 F 45,91 F 69,31 F 42,63 F 70,32 F 42,91 F 62,79 F 43,38 F 71,60 F 43,82 F 72,33 F 44,55 F 73,53 F 45,24 F 74,61 F 54,80 F 90,40 F 62,84 F 103,70 F 65,50 F 108,03 F 71,28 F 117,61 F 87,86 F 144,98 F 105,40 F 173,93 F Volume 4 2013 4 397 prEcision Range (Quality Grade 7e) Spur gear MODULE 0.5 Stainless steel 303 or 316 - Quality grade 7e DIN 58405 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only Part number Z SS- 303 SS- 316 Teeth PSG0.5-20S PSG0.5-20SL 20 PSG0.5-21S PSG0.5-21SL 21 PSG0.5-22S PSG0.5-22SL 22 PSG0.5-23S PSG0.5-23SL 23 PSG0.5-24S PSG0.5-24SL 24 PSG0.5-25S PSG0.5-25SL 25 PSG0.5-26S PSG0.5-26SL 26 PSG0.5-27S PSG0.5-27SL 27 PSG0.5-28S PSG0.5-28SL 28 PSG0.5-29S PSG0.5-29SL 29 PSG0.5-30S PSG0.5-30SL 30 PSG0.5-32S PSG0.5-32SL 32 PSG0.5-35S PSG0.5-35SL 35 PSG0.5-38S PSG0.5-38SL 38 PSG0.5-40S PSG0.5-40SL 40 PSG0.5-42S PSG0.5-42SL 42 PSG0.5-45S PSG0.5-45SL 45 PSG0.5-48S PSG0.5-48SL 48 PSG0.5-50S PSG0.5-50SL 50 PSG0.5-52S PSG0.5-52SL 52 PSG0.5-55S PSG0.5-55SL 55 PSG0.5-58S PSG0.5-58SL 58 PSG0.5-60S PSG0.5-60SL 60 Dimensions in mm ØP Pitch 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 16,0 17,5 19,0 20,0 21,0 22,5 24,0 25,0 26,0 27,5 29,0 30,0 398 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 11,0 4 8 0,076 - 0,037 11,5 4 8 0,077 - 0,036 12,0 4 8 0,077 - 0,036 12,5 4 8 0,077 - 0,036 13,0 5 10 0,077 - 0,036 13,5 5 10 0,087 - 0,042 14,0 5 10 0,087 - 0,042 14,5 5 10 0,087 - 0,042 15,0 5 10 0,087 - 0,042 15,5 6 13 0,087 - 0,042 16,0 6 13 0,087 - 0,042 17,0 6 13 0,087 - 0,042 18,5 6 13 0,087 - 0,042 20,0 6 17 0,089 - 0,041 21,0 6 17 0,089 - 0,041 22,0 6 17 0,089 - 0,041 23,5 6 17 0,089 - 0,041 25,0 6 17 0,089 - 0,041 26,0 6 17 0,089 - 0,041 27,0 6 17 0,097 - 0,046 28,5 6 17 0,097 - 0,046 30,0 6 17 0,097 - 0,046 31,0 6 17 0,097 - 0,046 HPC e grade 7 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 0,21 0,17 0,006 36,45 F 41,85 F 0,22 0,17 0,006 36,82 F 42,27 F 0,23 0,18 0,006 37,29 F 42,84 F 0,25 0,19 0,007 37,76 F 43,32 F 0,26 0,20 0,008 38,17 F 43,82 F 0,27 0,21 0,009 38,58 F 44,33 F 0,33 0,25 0,009 39,13 F 44,96 F 0,34 0,26 0,010 39,56 F 45,40 F 0,35 0,27 0,010 39,95 F 45,88 F 0,36 0,28 0,014 40,19 F 46,18 F 0,41 0,32 0,014 40,36 F 46,34 F 0,44 0,34 0,015 41,34 F 47,46 F 0,48 0,38 0,017 42,71 F 49,06 F 0,52 0,41 0,026 44,01 F 50,54 F 0,71 0,55 0,027 45,00 F 51,67 F 0,74 0,58 0,028 45,78 F 52,59 F 0,79 0,62 0,031 47,21 F 54,21 F 0,85 0,66 0,033 49,06 F 56,30 F 1,05 0,81 0,034 49,56 F 56,92 F 1,09 0,85 0,036 50,31 F 57,79 F 1,15 0,90 0,038 51,33 F 58,96 F 1,21 0,94 0,041 52,41 F 60,14 F 1,49 1,16 0,043 52,97 F 60,79 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA ØM 5 10 DISCOUNTS Z ØP Part number SS- 303 SS- 316 Teeth Pitch PSG0.5-62S PSG0.5-62SL 62 31,0 PSG0.5-65S PSG0.5-65SL 65 32,5 PSG0.5-68S PSG0.5-68SL 68 34,0 PSG0.5-70S PSG0.5-70SL 70 35,0 PSG0.5-72S PSG0.5-72SL 72 36,0 PSG0.5-75S PSG0.5-75SL 75 37,5 PSG0.5-78S PSG0.5-78SL 78 39,0 PSG0.5-80S PSG0.5-80SL 80 40,0 PSG0.5-82S PSG0.5-82SL 82 41,0 PSG0.5-85S PSG0.5-85SL 85 42,5 PSG0.5-90S PSG0.5-90SL 90 45,0 PSG0.5-100S PSG0.5-100SL 100 50,0 PSG0.5-120S PSG0.5-120SL 120 60,0 PSG0.5-130S PSG0.5-130SL 130 65,0 PSG0.5-140S PSG0.5-140SL 140 70,0 PSG0.5-150S PSG0.5-150SL 150 75,0 PSG0.5-200S PSG0.5-200SL 200 100,0 PSG0.5-250S PSG0.5-250SL 250 125,0 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 32,0 8 20 0,098 - 0,044 33,5 8 20 0,098 - 0,044 35,0 8 20 0,098 - 0,044 36,0 8 20 0,098 - 0,044 37,0 8 20 0,098 - 0,044 38,5 8 20 0,098 - 0,044 40,0 8 20 0,098 - 0,044 41,0 8 25 0,098 - 0,044 42,0 8 25 0,098 - 0,044 43,5 8 25 0,098 - 0,044 46,0 8 25 0,098 - 0,044 51,0 10 30 0,098 - 0,044 61,0 10 35 0,111 - 0,049 66,0 10 35 0,111 - 0,049 71,0 10 35 0,111 - 0,049 76,0 10 40 0,111 - 0,049 101,0 14 50 0,113 - 0,047 126,0 16 60 0,136 - 0,062 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 1,54 1,20 0,049 53,60 F 61,56 F 1,62 1,26 0,052 54,77 F 62,89 F 1,69 1,32 0,055 55,13 F 63,30 F 1,74 1,36 0,057 55,71 F 64,00 F 1,79 1,39 0,060 56,26 F 64,61 F 1,87 1,45 0,063 56,68 F 65,10 F 1,94 1,51 0,067 57,51 F 66,06 F 2,55 1,98 0,083 57,96 F 66,55 F 2,61 2,03 0,086 58,57 F 67,29 F 2,71 2,11 0,090 59,19 F 67,94 F 2,87 2,23 0,097 60,14 F 69,07 F 3,84 2,99 0,125 61,03 F 70,10 F 4,61 3,59 0,180 73,98 F 84,92 F 5,00 3,89 0,200 84,84 F 97,43 F 5,38 4,19 0,221 88,39 F 101,46 F 7,79 6,06 0,267 96,23 F 110,50 F 11,61 9,03 0,452 118,62 F 136,22 F 14,51 11,29 0,692 142,27 F 163,38 F Volume 4 2013 4 399 prEcision Range (Quality Grade 7e) Spur gear MODULE 0.8 Pre-treated or case hardened steel - Quality grade 7e DIN 58405 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. Part number Z Standard Hardened Teeth PSG0.8-18 PSG0.8-18H 18 PSG0.8-19 PSG0.8-19H 19 PSG0.8-20 PSG0.8-20H 20 PSG0.8-21 PSG0.8-21H 21 PSG0.8-22 PSG0.8-22H 22 PSG0.8-23 PSG0.8-23H 23 PSG0.8-24 PSG0.8-24H 24 PSG0.8-25 PSG0.8-25H 25 PSG0.8-26 PSG0.8-26H 26 PSG0.8-27 PSG0.8-27H 27 PSG0.8-28 PSG0.8-28H 28 PSG0.8-29 PSG0.8-29H 29 PSG0.8-30 PSG0.8-30H 30 PSG0.8-32 PSG0.8-32H 32 PSG0.8-35 PSG0.8-35H 35 PSG0.8-38 PSG0.8-38H 38 PSG0.8-40 PSG0.8-40H 40 PSG0.8-42 PSG0.8-42H 42 PSG0.8-45 PSG0.8-45H 45 PSG0.8-48 PSG0.8-48H 48 PSG0.8-50 PSG0.8-50H 50 PSG0.8-52 PSG0.8-52H 52 PSG0.8-55 PSG0.8-55H 55 PSG0.8-58 PSG0.8-58H 58 Dimensions in mm ØP Pitch 14,4 15,2 16,0 16,8 17,6 18,4 19,2 20,0 20,8 21,6 22,4 23,2 24,0 25,6 28,0 30,4 32,0 33,6 36,0 38,4 40,0 41,6 44,0 46,4 400 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 16,0 5 11 0,096 - 0,047 16,8 5 11 0,096 - 0,047 17,6 5 11 0,096 - 0,047 18,4 5 12 0,096 - 0,047 19,2 5 12 0,096 - 0,047 20,0 5 12 0,097 - 0,046 20,8 6 14 0,097 - 0,046 21,6 6 14 0,097 - 0,046 22,4 6 14 0,097 - 0,046 23,2 6 14 0,097 - 0,046 24,0 8 18 0,097 - 0,046 24,8 8 18 0,097 - 0,046 25,6 8 18 0,097 - 0,046 27,2 8 18 0,108 - 0,052 29,6 10 20 0,108 - 0,052 32,0 10 20 0,109 - 0,050 33,6 10 20 0,109 - 0,050 35,2 10 20 0,109 - 0,050 37,6 10 20 0,109 - 0,050 40,0 10 30 0,109 - 0,050 41,6 10 30 0,109 - 0,050 43,2 10 30 0,109 - 0,050 45,6 10 30 0,109 - 0,050 48,0 10 30 0,109 - 0,050 HPC e grade 7 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 0,94 3,46 0,015 26,39 F 44,23 F 1,00 3,65 0,016 26,81 F 44,93 F 1,33 4,53 0,017 27,20 F 45,60 F 1,39 4,76 0,020 28,06 F 46,28 F 1,46 4,98 0,021 28,44 F 46,99 F 1,53 5,21 0,023 28,59 F 47,17 F 1,59 5,44 0,026 28,72 F 47,44 F 1,66 5,66 0,028 29,94 F 49,42 F 2,03 5,90 0,029 31,02 F 51,20 F 2,11 6,13 0,031 31,63 F 52,22 F 2,18 6,35 0,037 32,36 F 53,42 F 2,26 6,58 0,039 33,21 F 54,80 F 2,58 6,76 0,041 33,76 F 55,71 F 2,75 7,21 0,045 34,62 F 57,19 F 3,00 7,89 0,052 35,79 F 59,08 F 3,26 8,57 0,059 37,29 F 61,50 F 4,39 10,03 0,064 38,64 F 63,78 F 4,61 10,53 0,069 38,92 F 64,24 F 4,94 11,28 0,077 39,47 F 65,19 F 5,26 12,04 0,117 39,80 F 65,71 F 6,50 13,61 0,123 48,06 F 72,54 F 6,76 14,15 0,129 45,27 F 74,70 F 7,15 14,97 0,139 47,12 F 77,80 F 7,54 15,78 0,150 48,57 F 80,15 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.8 ØD ØP ØA ØM 8 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PSG0.8-60 PSG0.8-60H 60 PSG0.8-62 PSG0.8-62H 62 PSG0.8-65 PSG0.8-65H 65 PSG0.8-68 PSG0.8-68H 68 PSG0.8-70 PSG0.8-70H 70 PSG0.8-72 PSG0.8-72H 72 PSG0.8-75 PSG0.8-75H 75 PSG0.8-78 PSG0.8-78H 78 PSG0.8-80 PSG0.8-80H 80 PSG0.8-82 PSG0.8-82H 82 PSG0.8-85 PSG0.8-85H 85 PSG0.8-90 PSG0.8-90H 90 PSG0.8-95 PSG0.8-95H 95 PSG0.8-100 PSG0.8-100H 100 PSG0.8-110 PSG0.8-110H 110 PSG0.8-120 PSG0.8-120H 120 Dimensions in mm ØP Pitch 48,0 49,6 52,0 54,4 56,0 57,6 60,0 62,4 64,0 65,6 68,0 72,0 76,0 80,0 88,0 96,0 ØD ØA ØM Backlash External Bore Boss (mm) 49,6 10 40 0,109 - 0,050 51,2 10 40 0,109 - 0,050 53,6 10 40 0,122 - 0,055 56,0 10 40 0,122 - 0,055 57,6 10 40 0,122 - 0,055 59,2 10 40 0,122 - 0,055 61,6 10 50 0,122 - 0,055 64,0 10 50 0,122 - 0,055 65,6 10 50 0,122 - 0,055 67,2 10 50 0,122 - 0,055 69,6 10 50 0,122 - 0,055 73,6 10 65 0,122 - 0,055 77,6 10 65 0,122 - 0,055 81,6 14 65 0,122 - 0,055 89,6 14 70 0,123 - 0,053 97,6 14 70 0,123 - 0,053 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 9,29 17,00 0,200 49,70 F 82,01 F 9,60 17,57 0,208 51,33 F 84,73 F 10,06 18,42 0,220 55,02 F 90,76 F 10,52 19,27 0,233 57,81 F 95,45 F 10,83 19,83 0,241 59,03 F 97,43 F 11,14 20,40 0,250 60,31 F 99,54 F 11,61 21,25 0,320 64,34 F 106,21 F 12,07 22,10 0,334 65,30 F 107,79 F 15,21 23,77 0,344 66,66 F 109,97 F 15,59 24,36 0,354 67,57 F 111,55 F 16,16 25,25 0,370 69,04 F 113,94 F 17,11 26,74 0,504 71,26 F 117,59 F 18,06 28,22 0,533 78,87 F 130,20 F 19,45 30,39 0,553 79,93 F 131,92 F 20,42 31,91 0,661 100,08 F 165,15 F 21,40 33,43 0,733 113,18 F 186,74 F Volume 4 2013 4 401 prEcision Range (Quality Grade 7e) Spur gear MODULE 0.8 Stainless steel 303 or 316 - Quality grade 7e DIN 58405 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. DISCOUNTS - T  orque figures are for 100 rpm and are given as a guide only Part number Z SS- 303 SS- 316 Teeth PSG0.8-18S PSG0.8-18SL 18 PSG0.8-19S PSG0.8-19SL 19 PSG0.8-20S PSG0.8-20SL 20 PSG0.8-21S PSG0.8-21SL 21 PSG0.8-22S PSG0.8-22SL 22 PSG0.8-23S PSG0.8-23SL 23 PSG0.8-24S PSG0.8-24SL 24 PSG0.8-25S PSG0.8-25SL 25 PSG0.8-26S PSG0.8-26SL 26 PSG0.8-27S PSG0.8-27SL 27 PSG0.8-28S PSG0.8-28SL 28 PSG0.8-29S PSG0.8-29SL 29 PSG0.8-30S PSG0.8-30SL 30 PSG0.8-32S PSG0.8-32SL 32 PSG0.8-35S PSG0.8-35SL 35 PSG0.8-38S PSG0.8-38SL 38 PSG0.8-40S PSG0.8-40SL 40 PSG0.8-42S PSG0.8-42SL 42 PSG0.8-45S PSG0.8-45SL 45 PSG0.8-48S PSG0.8-48SL 48 PSG0.8-50S PSG0.8-50SL 50 PSG0.8-52S PSG0.8-52SL 52 PSG0.8-55S PSG0.8-55SL 55 PSG0.8-58S PSG0.8-58SL 58 Dimensions in mm ØP Pitch 14,4 15,2 16,0 16,8 17,6 18,4 19,2 20,0 20,8 21,6 22,4 23,2 24,0 25,6 28,0 30,4 32,0 33,6 36,0 38,4 40,0 41,6 44,0 46,4 402 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 16,0 16,8 17,6 18,4 19,2 20,0 20,8 21,6 22,4 23,2 24,0 24,8 25,6 27,2 29,6 32,0 33,6 35,2 37,6 40,0 41,6 43,2 45,6 48,0 5 5 5 5 5 5 6 6 6 6 8 8 8 8 10 10 10 10 10 10 10 10 10 10 HPC 11 11 11 12 12 12 14 14 14 14 18 18 18 18 20 20 20 20 20 30 30 30 30 30 e grade 7 0,096 - 0,047 0,096 - 0,047 0,096 - 0,047 0,096 - 0,047 0,096 - 0,047 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,097 - 0,046 0,108 - 0,052 0,108 - 0,052 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 0,57 0,60 0,80 0,84 0,88 0,92 0,96 0,99 1,22 1,26 1,31 1,36 1,55 1,65 1,80 1,96 2,63 2,76 2,96 3,16 3,90 4,06 4,29 4,53 0,44 0,47 0,62 0,65 0,68 0,71 0,74 0,77 0,95 0,98 1,02 1,06 1,20 1,28 1,40 1,52 2,05 2,15 2,30 2,46 3,03 3,16 3,34 3,52 0,015 0,016 0,017 0,020 0,022 0,023 0,027 0,028 0,030 0,031 0,038 0,040 0,042 0,046 0,053 0,060 0,065 0,070 0,078 0,119 0,125 0,132 0,142 0,153 35,64 F 36,17 F 36,73 F 37,86 F 38,45 F 38,58 F 38,81 F 40,42 F 41,89 F 42,73 F 43,71 F 44,84 F 45,60 F 46,79 F 48,34 F 50,33 F 52,16 F 52,56 F 53,32 F 53,77 F 59,34 F 61,08 F 63,67 F 65,57 F 40,94 F 41,55 F 42,16 F 43,50 F 44,11 F 44,33 F 44,57 F 46,43 F 48,06 F 49,09 F 50,17 F 51,49 F 52,36 F 53,70 F 55,52 F 57,79 F 59,90 F 60,35 F 61,24 F 61,73 F 68,15 F 70,15 F 73,09 F 75,30 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.8 ØD ØP ØA ØM 8 10 DISCOUNTS Part number Z SS- 303 SS- 316 Teeth PSG0.8-60S PSG0.8-60SL 60 PSG0.8-62S PSG0.8-62SL 62 PSG0.8-65S PSG0.8-65SL 65 PSG0.8-68S PSG0.8-68SL 68 PSG0.8-70S PSG0.8-70SL 70 PSG0.8-72S PSG0.8-72SL 72 PSG0.8-75S PSG0.8-75SL 75 PSG0.8-78S PSG0.8-78SL 78 PSG0.8-80S PSG0.8-80SL 80 PSG0.8-82S PSG0.8-82SL 82 PSG0.8-85S PSG0.8-85SL 85 PSG0.8-90S PSG0.8-90SL 90 PSG0.8-95S PSG0.8-95SL 95 PSG0.8-100S PSG0.8-100SL 100 PSG0.8-110S PSG0.8-110SL 110 PSG0.8-120S PSG0.8-120SL 120 Dimensions in mm ØP Pitch 48,0 49,6 52,0 54,4 56,0 57,6 60,0 62,4 64,0 65,6 68,0 72,0 76,0 80,0 88,0 96,0 ØD ØA ØM Backlash External Bore Boss (mm) 49,6 10 40 0,109 - 0,050 51,2 10 40 0,109 - 0,050 53,6 10 40 0,122 - 0,055 56,0 10 40 0,122 - 0,055 57,6 10 40 0,122 - 0,055 59,2 10 40 0,122 - 0,055 61,6 10 50 0,122 - 0,055 64,0 10 50 0,122 - 0,055 65,6 10 50 0,122 - 0,055 67,2 10 50 0,122 - 0,055 69,6 10 50 0,122 - 0,055 73,6 10 65 0,122 - 0,055 77,6 10 65 0,122 - 0,055 81,6 14 65 0,122 - 0,055 89,6 14 70 0,123 - 0,053 97,6 14 70 0,123 - 0,053 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 5,57 4,33 0,204 67,10 F 77,05 F 5,76 4,48 0,212 69,31 F 79,58 F 6,04 4,69 0,224 74,26 F 85,28 F 6,31 4,91 0,237 78,08 F 89,66 F 6,50 5,06 0,246 79,71 F 91,51 F 6,69 5,20 0,255 81,42 F 93,48 F 6,96 5,42 0,326 86,90 F 99,75 F 7,24 5,63 0,340 88,18 F 101,24 F 9,51 7,40 0,351 89,96 F 103,30 F 9,75 7,58 0,361 91,26 F 104,76 F 10,10 7,86 0,377 93,21 F 107,02 F 10,70 8,32 0,513 96,20 F 110,47 F 11,29 8,78 0,543 106,51 F 122,30 F 14,33 11,15 0,564 107,95 F 123,94 F 15,05 11,70 0,673 135,10 F 155,14 F 15,77 12,26 0,747 152,81 F 175,46 F Volume 4 2013 4 403 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin Quality e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. Part number Z Standard Hardened Teeth PSG1.0-18 PSG1.0-18H 18 PSG1.0-19 PSG1.0-19H 19 PSG1.0-20 PSG1.0-20H 20 PSG1.0-21 PSG1.0-21H 21 PSG1.0-22 PSG1.0-22H 22 PSG1.0-23 PSG1.0-23H 23 PSG1.0-24 PSG1.0-24H 24 PSG1.0-25 PSG1.0-25H 25 PSG1.0-26 PSG1.0-26H 26 PSG1.0-27 PSG1.0-27H 27 PSG1.0-28 PSG1.0-28H 28 PSG1.0-29 PSG1.0-29H 29 PSG1.0-30 PSG1.0-30H 30 PSG1.0-32 PSG1.0-32H 32 PSG1.0-35 PSG1.0-35H 35 PSG1.0-38 PSG1.0-38H 38 PSG1.0-40 PSG1.0-40H 40 PSG1.0-42 PSG1.0-42H 42 PSG1.0-45 PSG1.0-45H 45 PSG1.0-48 PSG1.0-48H 48 PSG1.0-50 PSG1.0-50H 50 Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35 38 40 42 45 48 50 404 4 Volume  4 2013 20 21 22 23 24 25 26 27 28 29 30 31 32 34 37 40 42 44 47 50 52 5 5 5 5 5 5 6 6 6 6 6 8 8 8 8 10 10 10 10 10 10 HPC 15 15 15 15 15 15 20 20 20 20 20 25 25 25 25 34 34 34 34 34 34 0,127 - 0,053 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 1,76 1,86 2,48 2,60 2,73 2,85 2,97 3,10 3,79 3,94 4,08 4,23 4,81 5,13 5,61 6,09 8,19 8,60 9,22 9,83 12,15 6,47 6,83 8,85 9,29 9,73 10,18 10,62 11,06 11,52 11,96 12,41 12,85 13,21 14,09 15,41 16,73 19,59 20,57 22,04 23,51 26,57 0,033 0,035 0,038 0,040 0,043 0,045 0,060 0,063 0,066 0,069 0,073 0,089 0,092 0,100 0,112 0,160 0,170 0,180 0,196 0,213 0,225 27,99 F 28,42 F 29,33 F 29,55 F 29,94 F 30,10 F 30,25 F 31,52 F 32,64 F 33,32 F 34,06 F 34,95 F 35,53 F 36,45 F 37,70 F 39,23 F 40,66 F 40,96 F 41,55 F 41,91 F 46,26 F 46,21 F 46,89 F 48,45 F 48,72 F 49,44 F 49,65 F 49,94 F 52,03 F 53,91 F 54,99 F 56,24 F 57,69 F 58,68 F 60,14 F 62,23 F 64,74 F 67,16 F 67,66 F 68,60 F 69,16 F 76,33 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA ØM 10 12 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request ØD ØA ØM Backlash Part number Z ØP (mm) Standard Hardened Teeth Pitch External Bore Boss PSG1.0-52 PSG1.0-55 PSG1.0-58 PSG1.0-60 PSG1.0-62 PSG1.0-65 PSG1.0-68 PSG1.0-70 PSG1.0-72 PSG1.0-75 PSG1.0-78 PSG1.0-80 PSG1.0-82 PSG1.0-85 PSG1.0-90 PSG1.0-95 PSG1.0-100 PSG1.0-110 PSG1.0-120 PSG1.0-52H 52 52 PSG1.0-55H 55 55 PSG1.0-58H 58 58 PSG1.0-60H 60 60 PSG1.0-62H 62 62 PSG1.0-65H 65 65 PSG1.0-68H 68 68 PSG1.0-70H 70 70 PSG1.0-72H 72 72 PSG1.0-75H 75 75 PSG1.0-78H 78 78 PSG1.0-80H 80 80 PSG1.0-82H 82 82 PSG1.0-85H 85 85 PSG1.0-90H 90 90 PSG1.0-95H 95 95 PSG1.0-100H 100 100 PSG1.0-110H 110 110 PSG1.0-120H 120 120 Dimensions in mm 54 57 60 62 64 67 70 72 74 77 80 82 84 87 92 97 102 112 122 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 40 40 40 40 40 50 50 50 50 50 60 60 60 60 60 60 70 70 70 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 12,63 13,36 14,09 17,35 17,92 18,79 19,66 20,24 20,81 21,68 22,55 29,61 30,35 31,46 33,31 35,16 37,99 41,79 45,59 27,64 29,23 30,82 33,20 34,31 35,97 37,63 38,73 39,84 41,50 43,16 46,42 47,58 49,32 52,22 55,12 59,36 65,30 71,24 0,270 0,290 0,311 0,325 0,340 0,430 0,455 0,472 0,489 0,516 0,626 0,645 0,665 0,696 0,750 0,807 0,950 1,079 1,220 47,66 F 78,60 F 49,61 F 81,87 F 51,14 F 84,36 F 52,31 F 86,34 F 54,02 F 89,18 F 57,91 F 95,54 F 60,89 F 100,50 F 62,14 F 102,58 F 63,47 F 104,79 F 67,73 F 111,78 F 68,77 F 113,50 F 70,15 F 115,73 F 71,15 F 117,43 F 72,66 F 119,93 F 75,00 F 123,77 F 83,03 F 137,05 F 84,13 F 138,88 F 105,35 F 173,85 F 119,15 F 196,57 F Volume 4 2013 4 405 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.0 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin Quality e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only Z Part number SS- 303 SS- 316 Teeth PSG1.0-18S PSG1.0-18SL 18 PSG1.0-19S PSG1.0-19SL 19 PSG1.0-20S PSG1.0-20SL 20 PSG1.0-21S PSG1.0-21SL 21 PSG1.0-22S PSG1.0-22SL 22 PSG1.0-23S PSG1.0-23SL 23 PSG1.0-24S PSG1.0-24SL 24 PSG1.0-25S PSG1.0-25SL 25 PSG1.0-26S PSG1.0-26SL 26 PSG1.0-27S PSG1.0-27SL 27 PSG1.0-28S PSG1.0-28SL 28 PSG1.0-29S PSG1.0-29SL 29 PSG1.0-30S PSG1.0-30SL 30 PSG1.0-32S PSG1.0-32SL 32 PSG1.0-35S PSG1.0-35SL 35 PSG1.0-38S PSG1.0-38SL 38 PSG1.0-40S PSG1.0-40SL 40 PSG1.0-42S PSG1.0-42SL 42 PSG1.0-45S PSG1.0-45SL 45 PSG1.0-48S PSG1.0-48SL 48 PSG1.0-50S PSG1.0-50SL 50 Dimensions in mm ØP Pitch 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35 38 40 42 45 48 50 406 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 20 5 15 0,127 - 0,053 21 5 15 0,128 - 0,052 22 5 15 0,128 - 0,052 23 5 15 0,128 - 0,052 24 5 15 0,128 - 0,052 25 5 15 0,128 - 0,052 26 6 20 0,128 - 0,052 27 6 20 0,128 - 0,052 28 6 20 0,128 - 0,052 29 6 20 0,128 - 0,052 30 6 20 0,128 - 0,052 31 8 25 0,128 - 0,052 32 8 25 0,128 - 0,052 34 8 25 0,129 - 0,051 37 8 25 0,129 - 0,051 40 10 34 0,129 - 0,051 42 10 34 0,129 - 0,051 44 10 34 0,129 - 0,051 47 10 34 0,129 - 0,051 50 10 34 0,129 - 0,051 52 10 34 0,129 - 0,051 HPC DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 1,06 0,82 0,034 37,81 F 43,45 F 1,12 0,87 0,036 38,40 F 44,11 F 1,49 1,16 0,038 39,63 F 45,51 F 1,56 1,21 0,041 39,90 F 45,78 F 1,64 1,27 0,044 40,47 F 46,46 F 1,71 1,33 0,046 40,61 F 46,65 F 1,78 1,39 0,061 40,86 F 46,93 F 1,86 1,45 0,064 42,58 F 48,87 F 2,27 1,77 0,067 44,11 F 50,64 F 2,36 1,84 0,070 45,00 F 51,67 F 2,45 1,90 0,074 45,99 F 52,83 F 2,54 1,97 0,091 47,21 F 54,21 F 2,89 2,24 0,094 47,99 F 55,10 F 3,08 2,39 0,102 49,21 F 56,52 F 3,37 2,62 0,114 50,91 F 58,45 F 3,66 2,84 0,163 52,99 F 60,81 F 4,92 3,82 0,173 54,91 F 63,06 F 5,16 4,02 0,183 55,35 F 63,52 F 5,53 4,30 0,199 56,14 F 64,46 F 5,90 4,59 0,217 56,59 F 64,97 F 7,29 5,67 0,229 62,45 F 71,72 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA ØM 10 12 DISCOUNTS Z ØP Part number SS- 303 SS- 316 Teeth Pitch PSG1.0-52S PSG1.0-55S PSG1.0-58S PSG1.0-60S PSG1.0-62S PSG1.0-65S PSG1.0-68S PSG1.0-70S PSG1.0-72S PSG1.0-75S PSG1.0-78S PSG1.0-80S PSG1.0-82S PSG1.0-85S PSG1.0-90S PSG1.0-95S PSG1.0-100S PSG1.0-110S PSG1.0-120S PSG1.0-52SL 52 52 PSG1.0-55SL 55 55 PSG1.0-58SL 58 58 PSG1.0-60SL 60 60 PSG1.0-62SL 62 62 PSG1.0-65SL 65 65 PSG1.0-68SL 68 68 PSG1.0-70SL 70 70 PSG1.0-72SL 72 72 PSG1.0-75SL 75 75 PSG1.0-78SL 78 78 PSG1.0-80SL 80 80 PSG1.0-82SL 82 82 PSG1.0-85SL 85 85 PSG1.0-90SL 90 90 PSG1.0-95SL 95 95 PSG1.0-100SL 100 100 PSG1.0-110SL 110 110 PSG1.0-120SL 120 120 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 54 57 60 62 64 67 70 72 74 77 80 82 84 87 92 97 102 112 122 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 40 40 40 40 40 50 50 50 50 50 60 60 60 60 60 60 70 70 70 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 7,58 5,90 0,275 64,31 F 73,83 F 8,02 6,24 0,295 67,00 F 76,92 F 8,45 6,58 0,317 69,04 F 79,26 F 10,41 8,09 0,331 70,62 F 81,14 F 10,75 8,36 0,347 72,93 F 83,79 F 11,27 8,77 0,438 78,16 F 89,73 F 11,79 9,17 0,463 82,20 F 94,39 F 12,14 9,44 0,481 83,92 F 96,36 F 12,49 9,71 0,498 85,73 F 98,45 F 13,01 10,12 0,526 91,44 F 105,01 F 13,53 10,52 0,638 92,84 F 106,63 F 17,76 13,82 0,658 94,71 F 108,73 F 18,21 14,16 0,678 96,09 F 110,33 F 18,87 14,68 0,709 98,16 F 112,68 F 19,98 15,54 0,764 101,30 F 116,29 F 21,09 16,41 0,822 112,12 F 128,73 F 23,75 18,76 0,968 113,60 F 130,45 F 26,12 20,63 1,099 142,20 F 163,27 F 28,49 22,51 1,244 160,85 F 184,67 F Volume 4 2013 4 407 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.25 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin Quality e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Z ØP Part number Standard Hardened Teeth Pitch PSG1.25-18 PSG1.25-18H 18 22,50 PSG1.25-19 PSG1.25-19H 19 23,75 PSG1.25-20 PSG1.25-20H 20 25,00 PSG1.25-21 PSG1.25-21H 21 26,25 PSG1.25-22 PSG1.25-22H 22 27,50 PSG1.25-23 PSG1.25-23H 23 28,75 PSG1.25-24 PSG1.25-24H 24 30,00 PSG1.25-25 PSG1.25-25H 25 31,25 PSG1.25-26 PSG1.25-26H 26 32,50 PSG1.25-27 PSG1.25-27H 27 33,75 PSG1.25-28 PSG1.25-28H 28 35,00 PSG1.25-29 PSG1.25-29H 29 36,25 PSG1.25-30 PSG1.25-30H 30 37,50 PSG1.25-32 PSG1.25-32H 32 40,00 PSG1.25-35 PSG1.25-35H 35 43,75 PSG1.25-38 PSG1.25-38H 38 47,50 PSG1.25-40 PSG1.25-40H 40 50,00 PSG1.25-42 PSG1.25-42H 42 52,50 PSG1.25-45 PSG1.25-45H 45 56,25 Dimensions in mm 408 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 25,00 6 15 0,097 - 0,046 26,25 6 15 0,097 - 0,046 27,50 6 15 0,108 - 0,052 28,75 8 20 0,108 - 0,052 30,00 8 20 0,108 - 0,052 31,25 8 20 0,108 - 0,052 32,50 8 22 0,108 - 0,052 33,75 8 22 0,109 - 0,050 35,00 8 22 0,109 - 0,050 36,25 8 22 0,109 - 0,050 37,50 8 25 0,109 - 0,050 38,75 8 25 0,109 - 0,050 40,00 8 25 0,109 - 0,050 42,50 8 25 0,109 - 0,050 46,25 10 30 0,109 - 0,050 50,00 10 30 0,109 - 0,050 52,50 10 30 0,120 - 0,057 55,00 10 30 0,122 - 0,055 58,75 10 30 0,122 - 0,055 HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 3,29 12,08 0,050 35,02 F 57,79 F 3,48 12,75 0,055 35,53 F 58,68 F 4,63 16,97 0,059 36,08 F 59,56 F 4,86 17,82 0,073 37,24 F 61,42 F 5,09 18,67 0,079 37,76 F 62,31 F 5,32 19,52 0,084 37,92 F 62,58 F 5,55 20,36 0,096 38,14 F 62,91 F 5,79 21,21 0,102 39,69 F 65,55 F 7,08 22,50 0,108 41,13 F 67,89 F 7,35 23,37 0,114 42,00 F 69,28 F 7,62 24,23 0,132 42,91 F 70,83 F 7,90 25,10 0,138 44,05 F 72,71 F 8,98 25,80 0,145 44,79 F 73,92 F 9,58 27,52 0,160 45,94 F 75,83 F 10,48 30,10 0,200 47,51 F 78,40 F 11,38 32,68 0,226 49,44 F 81,57 F 15,31 38,26 0,245 51,25 F 84,58 F 16,07 40,17 0,264 51,65 F 85,20 F 17,22 43,04 0,296 52,38 F 86,45 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.25 ØD ØP ØA ØM 12,5 12,5 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Z ØP ØD ØA ØM Backlash Part number (mm) Standard Hardened Teeth Pitch External Bore Boss PSG1.25-48 PSG1.25-48H 48 60,00 62,50 10 40 0,122 - 0,055 PSG1.25-50 PSG1.25-50H 50 62,50 65,00 10 40 0,122 - 0,055 PSG1.25-52 PSG1.25-52H 52 65,00 67,50 10 40 0,122 - 0,055 PSG1.25-55 PSG1.25-55H 55 68,75 71,25 10 40 0,122 - 0,055 PSG1.25-58 PSG1.25-58H 58 72,50 75,00 10 40 0,122 - 0,055 PSG1.25-60 PSG1.25-60H 60 75,00 77,50 10 50 0,122 - 0,055 PSG1.25-62 PSG1.25-62H 62 77,50 80,00 10 50 0,122 - 0,055 PSG1.25-65 PSG1.25-65H 65 81,25 83,75 10 50 0,123 - 0,053 PSG1.25-68 PSG1.25-68H 68 85,00 87,50 10 50 0,123 - 0,053 PSG1.25-70 PSG1.25-70H 70 87,50 90,00 10 50 0,123 - 0,053 PSG1.25-72 PSG1.25-72H 72 90,00 92,50 10 50 0,123 - 0,053 PSG1.25-75 PSG1.25-75H 75 93,75 96,25 10 60 0,123 - 0,053 PSG1.25-78 PSG1.25-78H 78 97,50 100,00 10 60 0,123 - 0,053 PSG1.25-80 PSG1.25-80H 80 100,00 102,50 10 60 0,138 - 0,064 PSG1.25-82 PSG1.25-82H 82 102,50 105,00 10 60 0,138 - 0,064 PSG1.25-85 PSG1.25-85H 85 106,25 108,75 10 60 0,138 - 0,064 PSG1.25-90 PSG1.25-90H 90 112,50 115,00 10 65 0,138 - 0,064 PSG1.25-95 PSG1.25-95H 95 118,75 121,25 10 65 0,138 - 0,064 PSG1.25-100 PSG1.25-100H 100 125,00 127,50 14 65 0,140 - 0,062 PSG1.25-110 PSG1.25-110H 110 137,50 140,00 14 70 0,140 - 0,062 PSG1.25-120 PSG1.25-120 120 150,00 152,50 14 70 0,140 - 0,062 Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 18,37 45,91 0,383 52,81 F 87,19 F 22,69 51,90 0,407 58,32 F 96,23 F 23,60 53,98 0,431 60,03 F 99,09 F 24,96 57,09 0,469 62,53 F 103,21 F 26,32 60,20 0,510 64,41 F 106,31 F 32,40 64,85 0,608 65,91 F 108,78 F 33,48 67,01 0,637 68,10 F 112,35 F 35,10 70,25 0,683 72,95 F 120,43 F 36,72 73,49 0,731 76,72 F 126,60 F 37,80 75,65 0,764 78,30 F 128,95 F 38,88 77,82 0,798 80,02 F 132,02 F 40,50 81,06 0,935 85,37 F 140,84 F 42,12 84,30 0,991 86,63 F 142,99 F 55,30 90,66 1,029 88,39 F 145,89 F 56,68 92,92 1,067 89,66 F 147,94 F 58,75 96,32 1,128 91,60 F 151,13 F 62,21 101,99 1,281 94,54 F 156,00 F 65,67 107,66 1,392 104,65 F 172,69 F 74,20 115,95 1,494 106,03 F 174,99 F 77,92 121,74 1,798 132,75 F 219,08 F 81,63 127,54 2,075 150,13 F 150,13 F Volume 4 2013 4 409 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.25 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only DISCOUNTS Part number Z SS- 303 SS- 316 Teeth PSG1.25-18S PSG1.25-18SL 18 PSG1.25-19S PSG1.25-19SL 19 PSG1.25-20S PSG1.25-20SL 20 PSG1.25-21S PSG1.25-21SL 21 PSG1.25-22S PSG1.25-22SL 22 PSG1.25-23S PSG1.25-23SL 23 PSG1.25-24S PSG1.25-24SL 24 PSG1.25-25S PSG1.25-25SL 25 PSG1.25-26S PSG1.25-26SL 26 PSG1.25-27S PSG1.25-27SL 27 PSG1.25-28S PSG1.25-28SL 28 PSG1.25-29S PSG1.25-29SL 29 PSG1.25-30S PSG1.25-30SL 30 PSG1.25-32S PSG1.25-32SL 32 PSG1.25-35S PSG1.25-35SL 35 PSG1.25-38S PSG1.25-38SL 38 PSG1.25-40S PSG1.25-40SL 40 PSG1.25-42S PSG1.25-42SL 42 PSG1.25-45S PSG1.25-45SL 45 Dimensions in mm ØP Pitch 22,50 23,75 25,00 26,25 27,50 28,75 30,00 31,25 32,50 33,75 35,00 36,25 37,50 40,00 43,75 47,50 50,00 52,50 56,25 410 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 25,00 6 15 0,097 - 0,046 26,25 6 15 0,097 - 0,046 27,50 6 15 0,108 - 0,052 28,75 8 20 0,108 - 0,052 30,00 8 20 0,108 - 0,052 31,25 8 20 0,108 - 0,052 32,50 8 22 0,108 - 0,052 33,75 8 22 0,109 - 0,050 35,00 8 22 0,109 - 0,050 36,25 8 22 0,109 - 0,050 37,50 8 25 0,109 - 0,050 38,75 8 25 0,109 - 0,050 40,00 8 25 0,109 - 0,050 42,50 8 25 0,109 - 0,050 46,25 10 30 0,109 - 0,050 50,00 10 30 0,109 - 0,050 52,50 10 30 0,120 - 0,057 55,00 10 30 0,122 - 0,055 58,75 10 30 0,122 - 0,055 HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 1,98 1,54 0,051 47,31 F 54,31 F 2,09 1,62 0,056 48,01 F 55,10 F 2,78 2,16 0,061 48,72 F 55,93 F 2,92 2,27 0,075 50,25 F 57,71 F 3,05 2,38 0,080 50,98 F 58,54 F 3,19 2,48 0,085 51,22 F 58,79 F 3,33 2,59 0,098 51,49 F 59,12 F 3,47 2,70 0,104 53,60 F 61,58 F 4,25 3,30 0,110 55,54 F 63,78 F 4,41 3,43 0,116 56,68 F 65,10 F 4,57 3,56 0,134 57,98 F 66,57 F 4,74 3,68 0,141 59,48 F 68,29 F 5,39 4,19 0,148 60,47 F 69,44 F 5,75 4,47 0,163 62,02 F 71,23 F 6,29 4,89 0,204 64,13 F 73,65 F 6,83 5,31 0,230 66,74 F 76,64 F 9,18 7,14 0,250 69,21 F 79,46 F 9,64 7,50 0,270 69,71 F 80,08 F 10,33 8,04 0,301 70,73 F 81,21 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.25 ØD ØP ØA ØM 12,5 Part number Z ØP SS- 303 SS- 316 Teeth Pitch PSG1.25-48S PSG1.25-48SL 48 60,00 PSG1.25-50S PSG1.25-50SL 50 62,50 PSG1.25-52S PSG1.25-52SL 52 65,00 PSG1.25-55S PSG1.25-55SL 55 68,75 PSG1.25-58S PSG1.25-58SL 58 72,50 PSG1.25-60S PSG1.25-60SL 60 75,00 PSG1.25-62S PSG1.25-62SL 62 77,50 PSG1.25-65S PSG1.25-65SL 65 81,25 PSG1.25-68S PSG1.25-68SL 68 85,00 PSG1.25-70S PSG1.25-70SL 70 87,50 PSG1.25-72S PSG1.25-72SL 72 90,00 PSG1.25-75S PSG1.25-75SL 75 93,75 PSG1.25-78S PSG1.25-78SL 78 97,50 PSG1.25-80S PSG1.25-80SL 80 100,00 PSG1.25-82S PSG1.25-82SL 82 102,50 PSG1.25-85S PSG1.25-85SL 85 106,25 PSG1.25-90S PSG1.25-90SL 90 112,50 PSG1.25-95S PSG1.25-95SL 95 118,75 PSG1.25-100S PSG1.25-100SL 100 125,00 PSG1.25-110S PSG1.25-110SL 110 137,50 PSG1.25-120S PSG1.25-120SL 120 150,00 12,5 DISCOUNTS ØD ØA ØM Backlash External Bore Boss (mm) 62,50 10 40 0,122 - 0,055 65,00 10 40 0,122 - 0,055 67,50 10 40 0,122 - 0,055 71,25 10 40 0,122 - 0,055 75,00 10 40 0,122 - 0,055 77,50 10 50 0,122 - 0,055 80,00 10 50 0,122 - 0,055 83,75 10 50 0,123 - 0,053 87,50 10 50 0,123 - 0,053 90,00 10 50 0,123 - 0,053 92,50 10 50 0,123 - 0,053 96,25 10 60 0,123 - 0,053 100,00 10 60 0,123 - 0,053 102,50 10 60 0,138 - 0,064 105,00 10 60 0,138 - 0,064 108,75 10 60 0,138 - 0,064 115,00 10 65 0,138 - 0,064 121,25 10 65 0,138 - 0,064 127,50 14 65 0,140 - 0,062 140,00 14 70 0,140 - 0,062 152,50 14 70 0,140 - 0,062 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 316 SS- 303 SS- 316 (kg) SS- 303 11,02 8,57 0,390 71,31 F 81,87 F 13,61 10,59 0,414 78,71 F 90,38 F 14,16 11,01 0,439 81,03 F 93,06 F 14,97 11,65 0,478 84,46 F 96,95 F 15,79 12,28 0,520 87,00 F 99,88 F 19,44 15,12 0,619 89,00 F 102,19 F 20,09 15,62 0,649 91,93 F 105,58 F 21,06 16,38 0,696 98,50 F 113,11 F 22,03 17,14 0,745 103,58 F 118,95 F 22,68 17,64 0,778 105,74 F 121,39 F 23,33 18,14 0,813 108,01 F 124,03 F 24,30 18,90 0,953 115,23 F 132,30 F 25,27 19,66 1,009 116,95 F 134,30 F 33,18 25,81 1,048 119,34 F 137,05 F 34,01 26,45 1,088 121,06 F 138,95 F 35,25 27,42 1,149 123,65 F 141,95 F 37,33 29,03 1,305 127,60 F 146,55 F 39,40 30,64 1,418 141,29 F 162,21 F 50,00 38,89 1,523 143,14 F 164,37 F 52,51 40,84 1,833 179,23 F 205,78 F 55,01 42,78 2,114 202,67 F 232,71 F HPC Volume 4 2013 4 411 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.5 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Quality Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. Part number Z ØP Standard Hardened Teeth Pitch PSG1.5-18 PSG1.5-18H 18 27,0 PSG1.5-19 PSG1.5-19H 19 28,5 PSG1.5-20 PSG1.5-20H 20 30,0 PSG1.5-21 PSG1.5-21H 21 31,5 PSG1.5-22 PSG1.5-22H 22 33,0 PSG1.5-23 PSG1.5-23H 23 34,5 PSG1.5-24 PSG1.5-24H 24 36,0 PSG1.5-25 PSG1.5-25H 25 37,5 PSG1.5-26 PSG1.5-26H 26 39,0 PSG1.5-27 PSG1.5-27H 27 40,5 PSG1.5-28 PSG1.5-28H 28 42,0 PSG1.5-29 PSG1.5-29H 29 43,5 PSG1.5-30 PSG1.5-30H 30 45,0 PSG1.5-32 PSG1.5-32H 32 48,0 PSG1.5-35 PSG1.5-35H 35 52,5 PSG1.5-38 PSG1.5-38H 38 57,0 PSG1.5-40 PSG1.5-40H 40 60,0 PSG1.5-42 PSG1.5-42H 42 63,0 PSG1.5-45 PSG1.5-45H 45 67,5 PSG1.5-48 PSG1.5-48H 48 72,0 Dimensions in mm 412 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 30,0 31,5 33,0 34,5 36,0 37,5 39,0 40,5 42,0 43,5 45,0 46,5 48,0 51,0 55,5 60,0 63,0 66,0 70,5 75,0 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 12 12 12 12 12 HPC 22 22 22 25 25 25 25 25 25 25 25 35 35 35 35 45 45 45 45 45 0,128 - 0,052 0,128 - 0,052 0,128 - 0,052 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 5,49 5,79 7,71 8,10 8,48 8,87 9,25 9,64 11,79 12,25 12,70 13,15 14,97 15,97 17,46 18,96 25,50 26,78 28,69 30,60 20,13 21,24 28,28 29,69 31,10 32,52 33,93 35,34 38,88 40,38 41,87 43,37 44,58 47,55 52,01 56,47 66,12 69,42 74,38 79,34 0,105 0,112 0,120 0,137 0,145 0,155 0,164 0,174 0,185 0,196 0,207 0,268 0,280 0,306 0,347 0,458 0,490 0,524 0,578 0,636 36,67 F 38,06 F 39,97 F 40,30 F 40,78 F 41,50 F 41,91 F 44,11 F 46,18 F 47,66 F 48,99 F 49,75 F 51,25 F 52,99 F 54,69 F 59,90 F 62,31 F 62,58 F 63,95 F 68,32 F 60,51 F 62,81 F 65,99 F 66,52 F 67,29 F 68,52 F 69,16 F 72,76 F 76,21 F 78,60 F 80,85 F 82,13 F 84,56 F 87,47 F 90,22 F 98,86 F 102,81 F 103,32 F 105,53 F 112,74 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.5 ØD ØP ØA ØM 15 15 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PSG1.5-50 PSG1.5-50H 50 75,0 PSG1.5-52 PSG1.5-52H 52 78,0 PSG1.5-55 PSG1.5-55H 55 82,5 PSG1.5-58 PSG1.5-58H 58 87,0 PSG1.5-60 PSG1.5-60H 60 90,0 PSG1.5-62 PSG1.5-62H 62 93,0 PSG1.5-65 PSG1.5-65H 65 97,5 PSG1.5-68 PSG1.5-68H 68 102,0 PSG1.5-70 PSG1.5-70H 70 105,0 PSG1.5-72 PSG1.5-72H 72 108,0 PSG1.5-75 PSG1.5-75H 75 112,5 PSG1.5-78 PSG1.5-78H 78 117,0 PSG1.5-80 PSG1.5-80H 80 120,0 PSG1.5-82 PSG1.5-82H 82 123,0 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 78,0 14 55 0,171 - 0,069 81,0 14 55 0,171 - 0,069 85,5 14 55 0,173 - 0,067 90,0 14 55 0,173 - 0,067 93,0 14 55 0,173 - 0,067 96,0 14 55 0,173 - 0,067 100,5 14 55 0,173 - 0,067 105,0 16 65 0,173 - 0,067 108,0 16 65 0,173 - 0,067 111,0 16 65 0,173 - 0,067 115,5 16 65 0,173 - 0,067 120,0 16 65 0,173 - 0,067 123,0 16 65 0,173 - 0,067 126,0 16 65 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 37,80 89,68 0,760 76,36 F 126,02 F 39,31 93,27 0,802 80,27 F 132,42 F 41,58 98,65 0,868 82,26 F 135,78 F 43,85 104,03 0,939 84,13 F 138,88 F 53,98 112,05 0,987 84,92 F 140,17 F 55,78 115,79 1,038 86,61 F 142,94 F 58,48 121,39 1,117 89,89 F 148,32 F 61,18 127,00 1,300 95,32 F 157,33 F 62,98 130,73 1,357 98,77 F 162,96 F 64,78 134,47 1,416 104,41 F 172,25 F 67,48 140,07 1,507 111,28 F 183,66 F 70,17 145,67 1,602 117,26 F 193,55 F 92,13 156,66 1,668 121,64 F 200,70 F 94,44 160,57 1,735 127,20 F 209,87 F Volume 4 2013 4 413 prEcision Range (Quality Grade 7e25) Spur gear MODULE 1.5 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only Part number Z ØP SS- 303 SS- 316 Teeth Pitch PSG1.5-18S PSG1.5-18SL 18 27,0 PSG1.5-19S PSG1.5-19SL 19 28,5 PSG1.5-20S PSG1.5-20SL 20 30,0 PSG1.5-21S PSG1.5-21SL 21 31,5 PSG1.5-22S PSG1.5-22SL 22 33,0 PSG1.5-23S PSG1.5-23SL 23 34,5 PSG1.5-24S PSG1.5-24SL 24 36,0 PSG1.5-25S PSG1.5-25SL 25 37,5 PSG1.5-26S PSG1.5-26SL 26 39,0 PSG1.5-27S PSG1.5-27SL 27 40,5 PSG1.5-28S PSG1.5-28SL 28 42,0 PSG1.5-29S PSG1.5-29SL 29 43,5 PSG1.5-30S PSG1.5-30SL 30 45,0 PSG1.5-32S PSG1.5-32SL 32 48,0 PSG1.5-35S PSG1.5-35SL 35 52,5 PSG1.5-38S PSG1.5-38SL 38 57,0 PSG1.5-40S PSG1.5-40SL 40 60,0 PSG1.5-42S PSG1.5-42SL 42 63,0 PSG1.5-45S PSG1.5-45SL 45 67,5 PSG1.5-48S PSG1.5-48SL 48 72,0 Dimensions in mm 414 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 30,0 6 22 0,128 - 0,052 31,5 6 22 0,128 - 0,052 33,0 6 22 0,128 - 0,052 34,5 8 25 0,129 - 0,051 36,0 8 25 0,129 - 0,051 37,5 8 25 0,129 - 0,051 39,0 8 25 0,129 - 0,051 40,5 8 25 0,129 - 0,051 42,0 8 25 0,129 - 0,051 43,5 8 25 0,129 - 0,051 45,0 8 25 0,129 - 0,051 46,5 10 35 0,129 - 0,051 48,0 10 35 0,129 - 0,051 51,0 10 35 0,129 - 0,051 55,5 10 35 0,171 - 0,069 60,0 12 45 0,171 - 0,069 63,0 12 45 0,171 - 0,069 66,0 12 45 0,171 - 0,069 70,5 12 45 0,171 - 0,069 75,0 12 45 0,171 - 0,069 HPC DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 3,29 2,56 0,107 49,51 F 56,87 F 3,48 2,70 0,114 51,36 F 58,96 F 4,63 3,60 0,123 53,96 F 61,97 F 4,86 3,78 0,139 54,43 F 62,51 F 5,09 3,96 0,148 55,08 F 63,22 F 5,32 4,14 0,158 56,03 F 63,22 F 5,55 4,32 0,168 56,59 F 64,97 F 5,78 4,50 0,178 59,51 F 68,32 F 7,08 5,50 0,189 62,36 F 71,60 F 7,35 5,72 0,200 64,31 F 73,83 F 7,62 5,93 0,211 66,11 F 75,91 F 7,89 6,14 0,273 67,18 F 77,10 F 8,98 6,99 0,285 69,18 F 79,46 F 9,58 7,45 0,311 71,54 F 82,15 F 10,48 8,15 0,354 73,83 F 84,79 F 11,38 8,85 0,467 80,91 F 92,88 F 15,30 11,90 0,500 84,11 F 96,59 F 16,07 12,50 0,534 84,53 F 97,05 F 17,21 13,39 0,589 86,34 F 99,14 F 18,36 14,28 0,648 92,26 F 105,92 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.5 ØD ØP ØA ØM 15 15 DISCOUNTS Z ØP Part number SS- 303 SS- 316 Teeth Pitch PSG1.5-50S PSG1.5-50SL 50 75,0 PSG1.5-52S PSG1.5-52SL 52 78,0 PSG1.5-55S PSG1.5-55SL 55 82,5 PSG1.5-58S PSG1.5-58SL 58 87,0 PSG1.5-60S PSG1.5-60SL 60 90,0 PSG1.5-62S PSG1.5-62SL 62 93,0 PSG1.5-65S PSG1.5-65SL 65 97,5 PSG1.5-68S PSG1.5-68SL 68 102,0 PSG1.5-70S PSG1.5-70SL 70 105,0 PSG1.5-72S PSG1.5-72SL 72 108,0 PSG1.5-75S PSG1.5-75SL 75 112,5 PSG1.5-78S PSG1.5-78SL 78 117,0 PSG1.5-80S PSG1.5-80SL 80 120,0 PSG1.5-82S PSG1.5-82SL 82 123,0 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 78,0 14 55 0,171 - 0,069 81,0 14 55 0,171 - 0,069 85,5 14 55 0,173 - 0,067 90,0 14 55 0,173 - 0,067 93,0 14 55 0,173 - 0,067 96,0 14 55 0,173 - 0,067 100,5 14 55 0,173 - 0,067 105,0 16 65 0,173 - 0,067 108,0 16 65 0,173 - 0,067 111,0 16 65 0,173 - 0,067 115,5 16 65 0,173 - 0,067 120,0 16 65 0,173 - 0,067 123,0 16 65 0,173 - 0,067 126,0 16 65 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 22,68 17,64 0,774 103,10 F 118,40 F 23,59 18,35 0,817 108,36 F 124,38 F 24,95 19,40 0,885 111,08 F 127,54 F 26,31 20,46 0,956 113,60 F 130,45 F 32,39 25,19 1,006 114,68 F 131,70 F 33,47 26,03 1,058 116,95 F 134,28 F 35,09 27,29 1,138 121,36 F 139,32 F 36,71 28,55 1,324 128,70 F 147,80 F 37,79 29,39 1,383 133,30 F 153,09 F 38,87 30,23 1,443 140,93 F 161,83 F 40,49 31,49 1,536 150,24 F 172,49 F 42,10 32,75 1,633 158,33 F 181,83 F 55,28 43,00 1,700 164,20 F 188,56 F 56,66 44,07 1,768 171,71 F 197,15 F Volume 4 2013 4 415 prEcision Range (Quality Grade 7e25) Spur gear MODULE 2.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Z Part number Standard Hardened Teeth PSG2.0-18 PSG2.0-18H 18 PSG2.0-19 PSG2.0-19H 19 PSG2.0-20 PSG2.0-20H 20 PSG2.0-21 PSG2.0-21H 21 PSG2.0-22 PSG2.0-22H 22 PSG2.0-23 PSG2.0-23H 23 PSG2.0-24 PSG2.0-24H 24 PSG2.0-25 PSG2.0-25H 25 PSG2.0-26 PSG2.0-26H 26 PSG2.0-27 PSG2.0-27H 27 PSG2.0-28 PSG2.0-28H 28 Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 36 40 10 30 0,129 - 0,051 38 42 10 30 0,129 - 0,051 40 44 10 30 0,129 - 0,051 42 46 12 35 0,129 - 0,051 44 48 12 35 0,129 - 0,051 46 50 12 35 0,129 - 0,051 48 52 12 35 0,129 - 0,051 50 54 12 35 0,129 - 0,051 52 56 12 35 0,171 - 0,069 54 58 12 35 0,171 - 0,069 56 60 12 35 0,171 - 0,069 416 4 Volume  4 2013 HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 12,28 45,04 0,244 55,10 F 90,96 F 12,97 47,54 0,262 56,35 F 93,01 F 17,26 63,28 0,281 57,51 F 94,93 F 18,12 66,44 0,330 59,03 F 97,45 F 18,98 69,60 0,351 59,95 F 99,00 F 19,85 72,77 0,373 61,24 F 101,05 F 20,71 75,93 0,396 62,56 F 103,26 F 21,57 79,09 0,420 66,08 F 109,02 F 26,39 92,17 0,445 68,18 F 112,52 F 27,41 95,71 0,471 70,60 F 116,54 F 28,42 99,26 0,498 72,15 F 119,04 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 2.0 ØD ØP ØA ØM 20 20 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PSG2.0-29 PSG2.0-29H 29 PSG2.0-30 PSG2.0-30H 30 PSG2.0-32 PSG2.0-32H 32 PSG2.0-35 PSG2.0-35H 35 PSG2.0-38 PSG2.0-38H 38 PSG2.0-40 PSG2.0-40H 40 PSG2.0-42 PSG2.0-42H 42 PSG2.0-45 PSG2.0-45H 45 PSG2.0-48 PSG2.0-48H 48 PSG2.0-50 PSG2.0-50H 50 PSG2.0-52 PSG2.0-52H 52 PSG2.0-55 PSG2.0-55H 55 PSG2.0-58 PSG2.0-58H 58 PSG2.0-60 PSG2.0-60H 60 PSG2.0-62 PSG2.0-62H 62 Dimensions in mm ØP ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 Pitch External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 58 62 14 45 0,171 - 0,069 29,44 102,80 0,612 73,95 F 122,03 F 60 64 14 45 0,171 - 0,069 33,50 105,67 0,640 75,59 F 124,69 F 64 68 14 45 0,171 - 0,069 35,73 112,71 0,701 82,09 F 135,47 F 70 74 14 45 0,171 - 0,069 39,08 123,28 0,799 90,60 F 149,52 F 76 80 14 45 0,171 - 0,069 42,43 133,85 0,907 99,47 F 149,52 F 80 84 16 55 0,171 - 0,069 57,07 156,72 1,092 103,65 F 164,12 F 84 88 16 55 0,173 - 0,067 59,93 164,56 1,172 106,81 F 171,05 F 90 94 16 55 0,173 - 0,067 64,21 176,31 1,300 111,50 F 176,31 F 96 100 16 55 0,173 - 0,067 68,49 188,06 1,437 120,06 F 198,09 F 100 104 20 65 0,173 - 0,067 84,59 212,58 1,646 128,54 F 212,09 F 104 108 20 65 0,173 - 0,067 87,98 221,08 1,746 133,28 F 219,99 F 110 114 20 65 0,173 - 0,067 93,05 233,84 1,903 150,53 F 248,37 F 116 120 20 65 0,173 - 0,067 98,13 246,59 2,070 159,64 F 263,42 F 120 124 20 65 0,173 - 0,067 120,80 265,61 2,186 163,67 F 270,12 F 124 128 20 65 0,175 - 0,065 124,83 274,46 2,306 167,70 F 276,67 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 417 prEcision Range (Quality Grade 7e25) Spur gear MODULE 2.0 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - T  orque figures are for 100 rpm and are given as a guide only DISCOUNTS Part number Z SS- 303 SS- 316 Teeth PSG2.0-18S PSG2.0-18SL 18 PSG2.0-19S PSG2.0-19SL 19 PSG2.0-20S PSG2.0-20SL 20 PSG2.0-21S PSG2.0-21SL 21 PSG2.0-22S PSG2.0-22SL 22 PSG2.0-23S PSG2.0-23SL 23 PSG2.0-24S PSG2.0-24SL 24 PSG2.0-25S PSG2.0-25SL 25 PSG2.0-26S PSG2.0-26SL 26 PSG2.0-27S PSG2.0-27SL 27 PSG2.0-28S PSG2.0-28SL 28 Dimensions in mm ØP Pitch 36 38 40 42 44 46 48 50 52 54 56 418 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 40 10 30 0,129 - 0,051 42 10 30 0,129 - 0,051 44 10 30 0,129 - 0,051 46 12 35 0,129 - 0,051 48 12 35 0,129 - 0,051 50 12 35 0,129 - 0,051 52 12 35 0,129 - 0,051 54 12 35 0,129 - 0,051 56 12 35 0,171 - 0,069 58 12 35 0,171 - 0,069 60 12 35 0,171 - 0,069 HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 7,37 5,73 0,249 74,41 F 85,42 F 7,78 6,05 0,267 76,09 F 87,39 F 10,35 8,05 0,287 77,69 F 89,18 F 10,87 8,46 0,337 79,76 F 91,57 F 11,39 8,86 0,358 80,96 F 92,99 F 11,91 9,26 0,380 82,69 F 94,93 F 12,43 9,66 0,404 84,51 F 97,00 F 12,94 10,07 0,428 89,21 F 102,41 F 15,84 12,32 0454 92,05 F 105,70 F 16,44 12,79 0,480 95,32 F 109,46 F 17,05 13,26 0,507 97,38 F 111,83 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 2.0 ØD ØP ØA ØM 20 20 DISCOUNTS Part number Z SS- 303 SS- 316 Teeth PSG2.0-29S PSG2.0-29SL 29 PSG2.0-30S PSG2.0-30SL 30 PSG2.0-32S PSG2.0-32SL 32 PSG2.0-35S PSG2.0-35SL 35 PSG2.0-38S PSG2.0-38SL 38 PSG2.0-40S PSG2.0-40SL 40 PSG2.0-42S PSG2.0-42SL 42 PSG2.0-45S PSG2.0-45SL 45 PSG2.0-48S PSG2.0-48SL 48 PSG2.0-50S PSG2.0-50SL 50 PSG2.0-52S PSG2.0-52SL 52 PSG2.0-55S PSG2.0-55SL 55 PSG2.0-58S PSG2.0-58SL 58 PSG2.0-60S PSG2.0-60SL 60 PSG2.0-62S PSG2.0-62SL 62 Dimensions in mm ØP Pitch 58 60 64 70 76 80 84 90 96 100 104 110 116 120 124 ØD ØA ØM Backlash External Bore Boss (mm) 62 14 45 0,171 - 0,069 64 14 45 0,171 - 0,069 68 14 45 0,171 - 0,069 74 14 45 0,171 - 0,069 80 14 45 0,171 - 0,069 84 16 55 0,171 - 0,069 88 16 55 0,173 - 0,067 94 16 55 0,173 - 0,067 100 16 55 0,173 - 0,067 104 20 65 0,173 - 0,067 108 20 65 0,173 - 0,067 114 20 65 0,173 - 0,067 120 20 65 0,173 - 0,067 124 20 65 0,173 - 0,067 128 20 65 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 316 SS- 303 SS- 316 (kg) SS- 303 17,66 13,74 0,623 99,86 F 114,63 F 20,10 15,63 0,653 102,03 F 117,15 F 21,44 16,68 0,714 110,84 F 127,26 F 23,45 18,24 0,815 122,32 F 140,45 F 25,46 19,80 0,924 134,28 F 99,47 F 34,24 26,63 1,113 139,96 F 160,66 F 35,96 27,97 1,194 144,25 F 165,62 F 38,52 29,96 1,325 150,48 F 172,76 F 41,09 31,96 1,464 162,07 F 186,10 F 50,76 39,48 1,677 173,52 F 199,20 F 52,79 41,06 1,779 179,94 F 206,67 F 55,83 43,42 1,940 203,19 F 233,34 F 58,88 45,79 2,109 215,50 F 247,43 F 72,48 56,37 2,227 220,98 F 253,74 F 74,90 58,25 2,350 226,36 F 259,89 F Volume 4 2013 4 419 prEcision Range (Quality Grade 7e25) Spur gear MODULE 2.5 Pre-treated or case hardened steel Quality - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin .Info.. e25 grade 7 ØD ØP ØA ØM 25 25 25 DISCOUNTS - T  orque figures are for 100 rpm and are given as a guide only Qty. 1+ 6+ 19+ 50+ - Grade and tolerances measured before heat Disc. List. -5% -10% On request treatment. Part number Z ØP ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 Standard Hardened Teeth Pitch External Bore Boss (mm) Standard Hardened (kg) Standard Hardened PSG2.5-18 PSG2.5-18H 18 45,0 50,0 14 35 0,129 - 0,051 22,94 84,12 0,437 74,14 F 122,38 F PSG2.5-19 PSG2.5-19H 19 47,5 52,5 14 35 0,129 - 0,051 24,22 88,80 0,472 76,16 F 125,65 F PSG2.5-20 PSG2.5-20H 20 50,0 55,0 14 35 0,129 - 0,051 32,23 118,19 0,509 78,93 F 130,25 F PSG2.5-21 PSG2.5-21H 21 52,5 57,5 14 35 0,171 - 0,069 33,85 124,10 0,548 80,85 F 133,39 F PSG2.5-22 PSG2.5-22H 22 55,0 60,0 14 35 0,171 - 0,069 35,46 130,01 0,589 83,75 F 138,22 F PSG2.5-23 PSG2.5-23H 23 57,5 62,5 16 45 0,171 - 0,069 37,07 135,92 0,737 85,86 F 141,67 F PSG2.5-24 PSG2.5-24H 24 60,0 65,0 16 45 0,171 - 0,069 38,68 141,83 0,781 88,39 F 145,82 F PSG2.5-25 PSG2.5-25H 25 62,5 67,5 16 45 0,171 - 0,069 40,29 147,74 0,828 93,17 F 153,75 F PSG2.5-26 PSG2.5-26H 26 65,0 70,0 16 45 0,171 - 0,069 49,30 180,01 0,877 97,88 F 161,54 F PSG2.5-27 PSG2.5-27H 27 67,5 72,5 16 45 0,171 - 0,069 51,20 186,94 0,927 99,98 F 164,95 F PSG2.5-28 PSG2.5-28H 28 70,0 75,0 16 45 0,171 - 0,069 53,09 193,86 0,980 102,58 F 169,19 F PSG2.5-29 PSG2.5-29H 29 72,5 77,5 18 55 0,171 - 0,069 54,99 200,78 1,168 105,92 F 174,79 F PSG2.5-30 PSG2.5-30H 30 75,0 80,0 18 55 0,171 - 0,069 62,57 206,38 1,224 109,53 F 180,75 F PSG2.5-32 PSG2.5-32H 32 80,0 85,0 18 55 0,171 - 0,069 66,74 220,14 1,342 116,16 F 191,69 F PSG2.5-35 PSG2.5-35H 35 87,5 92,5 18 55 0,173 - 0,067 73,00 240,78 1,535 123,05 F 203,07 F PSG2.5-38 PSG2.5-38H 38 95,0 100,0 20 70 0,173 - 0,067 79,26 261,42 2,010 135,28 F 223,20 F PSG2.5-40 PSG2.5-40H 40 100,0 105,0 20 70 0,173 - 0,067 106,60 306,09 2,159 140,62 F 232,01 F PSG2.5-42 PSG2.5-42H 42 105,0 110,0 20 70 0,173 - 0,067 111,93 321,40 2,316 146,19 F 241,25 F PSG2.5-45 PSG2.5-45H 45 112,5 117,5 20 70 0,173 - 0,067 119,93 344,36 2,566 151,36 F 249,78 F PSG2.5-48 PSG2.5-48H 48 120,0 125,0 20 70 0,173 - 0,067 127,92 367,31 2,833 162,15 F 267,58 F PSG2.5-50 PSG2.5-50H 50 125,0 130,0 20 70 0,175 - 0,065 158,01 415,19 3,021 171,14 F 282,39 F Dimensions in mm 420 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 7e25) Spur gear MODULE 2.5 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - Alternative bores (H7) - Keyway conforming to DIN 6885 (JS9) - Tapped hole - Hole for dowel pin ØD ØP ØA ØM .Info.. - T  orque figures are for 100 rpm and are given as a guide only 25 25 de 7e25 25 gra Quality DISCOUNTS Z ØP Part number SS- 303 SS- 316 Teeth Pitch PSG2.5-18S PSG2.5-18SL 18 45,0 PSG2.5-19S PSG2.5-19SL 19 47,5 PSG2.5-20S PSG2.5-20SL 20 50,0 PSG2.5-21S PSG2.5-21SL 21 52,5 PSG2.5-22S PSG2.5-22SL 22 55,0 PSG2.5-23S PSG2.5-23SL 23 57,5 PSG2.5-24S PSG2.5-24SL 24 60,0 PSG2.5-25S PSG2.5-25SL 25 62,5 PSG2.5-26S PSG2.5-26SL 26 65,0 PSG2.5-27S PSG2.5-27SL 27 67,5 PSG2.5-28S PSG2.5-28SL 28 70,0 PSG2.5-29S PSG2.5-29SL 29 72,5 PSG2.5-30S PSG2.5-30SL 30 75,0 PSG2.5-32S PSG2.5-32SL 32 80,0 PSG2.5-35S PSG2.5-35SL 35 87,5 PSG2.5-38S PSG2.5-38SL 38 95,0 PSG2.5-40S PSG2.5-40SL 40 100,0 PSG2.5-42S PSG2.5-42SL 42 105,0 PSG2.5-45S PSG2.5-45SL 45 112,5 PSG2.5-48S PSG2.5-48SL 48 120,0 PSG2.5-50S PSG2.5-50SL 50 125,0 Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 50,0 14 35 0,129 - 0,051 52,5 14 35 0,129 - 0,051 55,0 14 35 0,129 - 0,051 57,5 14 35 0,171 - 0,069 60,0 14 35 0,171 - 0,069 62,5 16 45 0,171 - 0,069 65,0 16 45 0,171 - 0,069 67,5 16 45 0,171 - 0,069 70,0 16 45 0,171 - 0,069 72,5 16 45 0,171 - 0,069 75,0 16 45 0,171 - 0,069 77,5 18 55 0,171 - 0,069 80,0 18 55 0,171 - 0,069 85,0 18 55 0,171 - 0,069 92,5 18 55 0,173 - 0,067 100,0 20 70 0,173 - 0,067 105,0 20 70 0,173 - 0,067 110,0 20 70 0,173 - 0,067 117,5 20 70 0,173 - 0,067 125,0 20 70 0,173 - 0,067 130,0 20 70 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 13,77 10,71 0,445 100,10 F 114,96 F 14,53 11,30 0,481 102,79 F 118,06 F 19,34 15,04 0,519 106,59 F 122,36 F 20,31 15,79 0,559 109,14 F 125,30 F 21,27 16,55 0,600 113,05 F 129,81 F 22,24 17,30 0,751 115,90 F 133,12 F 23,21 18,05 0,796 119,31 F 137,02 F 24,18 18,80 0,844 125,80 F 144,44 F 29,58 23,01 0,894 132,18 F 151,74 F 30,72 23,89 0,945 134,94 F 154,95 F 31,85 24,78 0,999 138,46 F 159,00 F 32,99 25,66 1,190 143,01 F 164,17 F 37,54 29,20 1,247 147,88 F 169,81 F 40,05 31,15 1,368 156,80 F 180,06 F 43,80 34,07 1,564 166,14 F 190,76 F 47,55 36,99 2,048 182,61 F 209,68 F 63,96 49,75 2,200 189,82 F 217,94 F 67,16 52,24 2,360 197,38 F 226,64 F 71,96 55,97 2,615 204,35 F 234,65 F 76,75 59,70 2,887 218,91 F 251,35 F 94,81 73,74 3,079 231,06 F 265,27 F Volume 4 2013 4 421 prEcision Range (Quality Grade 7e25) Spur gear MODULE 3.0 Pre-treated or case hardened steel Quality e25 grade 7 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Pre-treated steel 35NCD6, 28HRC Case hardened steel 20NCD2 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - ØD ØP Alternative bores (H7) Keyway conforming to DIN6885 (JS9) Tapped hole Hole for dowel pin .Info.. - T  orque figures are for 100 rpm and are given as a guide only - Grade and tolerances measured before heat treatment. Part number Z Standard Hardened Teeth PSG3.0-18 PSG3.0-18H 18 PSG3.0-19 PSG3.0-19H 19 PSG3.0-20 PSG3.0-20H 20 PSG3.0-21 PSG3.0-21H 21 PSG3.0-22 PSG3.0-22H 22 PSG3.0-23 PSG3.0-23H 23 PSG3.0-24 PSG3.0-24H 24 PSG3.0-25 PSG3.0-25H 25 PSG3.0-26 PSG3.0-26H 26 PSG3.0-27 PSG3.0-27H 27 PSG3.0-28 PSG3.0-28H 28 PSG3.0-29 PSG3.0-29H 29 PSG3.0-30 PSG3.0-30H 30 PSG3.0-32 PSG3.0-32H 32 PSG3.0-35 PSG3.0-35H 35 PSG3.0-38 PSG3.0-38H 38 PSG3.0-40 PSG3.0-40H 40 Dimensions in mm ØA ØM 25 30 30 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request ØP ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 Pitch External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 54 60 14 45 0,171 - 0,069 38,23 140,16 0,835 65,80 F 108,58 F 57 63 14 45 0,171 - 0,069 40,35 147,95 0,896 68,27 F 112,68 F 60 66 14 45 0,171 - 0,069 53,71 196,92 0,960 70,54 F 116,34 F 63 69 16 55 0,171 - 0,069 56,39 206,77 1,190 72,83 F 120,17 F 66 72 16 55 0,171 - 0,069 59,08 216,61 1,261 75,32 F 124,32 F 69 75 16 55 0,171 - 0,069 61,76 226,46 1,335 77,71 F 128,29 F 72 78 16 55 0,171 - 0,069 64,45 236,31 1,412 79,96 F 131,92 F 75 81 16 55 0,171 - 0,069 67,13 246,15 1,493 84,81 F 139,93 F 78 84 16 55 0,171 - 0,069 82,14 301,17 1,577 89,66 F 147,97 F 81 87 16 55 0,173 - 0,067 85,30 312,76 1,664 91,83 F 151,52 F 84 90 16 55 0,173 - 0,067 88,46 324,34 1,755 94,33 F 155,70 F 87 93 18 70 0,173 - 0,067 91,62 335,93 2,171 98,22 F 162,07 F 90 96 18 70 0,173 - 0,067 104,25 356,63 2,268 101,77 F 167,94 F 96 102 18 70 0,173 - 0,067 111,20 380,40 2,473 109,17 F 180,17 F 105 111 18 70 0,173 - 0,067 121,63 416,07 2,805 126,46 F 208,71 F 114 120 18 70 0,173 - 0,067 132,05 451,73 3,167 135,75 F 223,98 F 120 126 18 70 0,173 - 0,067 177,62 528,93 3,425 139,54 F 230,27 F 422 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 7e25) Spur gear MODULE 3.0 Stainless steel 303 or 316 - Quality grade 7e25 DIN 3961 (AGMA Q10) - Material : Stainless steel 303 Stainless steel 316 - Teeth profile conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - Alternative bores (H7) - Keyway conforming to DIN 6885 (JS9) - Tapped hole - Hole for dowel pin ØD ØP ØA ØM .Info.. - T  orque figures are for 100 rpm and are given as a guide only 25 30 5 ade 7e2 gr Quality 30 DISCOUNTS Part number Z SS- 303 SS- 316 Teeth PSG3.0-18S PSG3.0-18SL 18 PSG3.0-19S PSG3.0-19SL 19 PSG3.0-20S PSG3.0-20SL 20 PSG3.0-21S PSG3.0-21SL 21 PSG3.0-22S PSG3.0-22SL 22 PSG3.0-23S PSG3.0-23SL 23 PSG3.0-24S PSG3.0-24SL 24 PSG3.0-25S PSG3.0-25SL 25 PSG3.0-26S PSG3.0-26SL 26 PSG3.0-27S PSG3.0-27SL 27 PSG3.0-28S PSG3.0-28SL 28 PSG3.0-29S PSG3.0-29SL 29 PSG3.0-30S PSG3.0-30SL 30 PSG3.0-32S PSG3.0-32SL 32 PSG3.0-35S PSG3.0-35SL 35 PSG3.0-38S PSG3.0-38SL 38 PSG3.0-40S PSG3.0-40SL 40 Dimensions in mm ØP Pitch 54 57 60 63 66 69 72 75 78 81 84 87 90 96 105 114 120 ØD ØA ØM Backlash External Bore Boss (mm) 60 14 45 0,171 - 0,069 63 14 45 0,171 - 0,069 66 14 45 0,171 - 0,069 69 16 55 0,171 - 0,069 72 16 55 0,171 - 0,069 75 16 55 0,171 - 0,069 78 16 55 0,171 - 0,069 81 16 55 0,171 - 0,069 84 16 55 0,171 - 0,069 87 16 55 0,173 - 0,067 90 16 55 0,173 - 0,067 93 18 70 0,173 - 0,067 96 18 70 0,173 - 0,067 102 18 70 0,173 - 0,067 111 18 70 0,173 - 0,067 120 18 70 0,173 - 0,067 126 18 70 0,173 - 0,067 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) SS- 303 Price each 1 to 5 SS- 303 SS- 316 (kg) SS- 303 SS- 316 22,94 17,84 0,851 88,85 F 102,03 F 24,21 18,83 0,913 92,17 F 105,84 F 32,22 25,06 0,978 95,22 F 109,34 F 33,83 26,32 1,213 98,33 F 112,91 F 35,45 27,57 1,285 101,71 F 116,76 F 37,06 28,82 1,360 104,96 F 120,50 F 38,67 30,08 1,439 107,95 F 123,94 F 40,28 31,33 1,521 114,49 F 131,45 F 49,28 38,33 1,607 121,06 F 139,01 F 51,18 39,81 1,696 123,98 F 142,32 F 53,07 41,28 1,789 127,37 F 146,26 F 54,97 42,75 2,212 132,62 F 152,25 F 62,55 48,65 2,312 137,38 F 157,75 F 66,72 51,89 2,520 147,42 F 169,25 F 72,98 56,76 2,859 170,75 F 196,04 F 79,23 61,62 3,228 183,24 F 210,40 F 106,57 82,89 3,491 188,39 F 216,33 F HPC Volume 4 2013 4 423 prEcision Range (Quality Grade 8e) Spur gear MODULE 0.5 Delrin or Peek - Quality grade 8e DIN 58405 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only Dimensions in mm ØP Pitch 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 16,0 17,5 19,0 20,0 21,0 22,5 24,0 25,0 26,0 27,5 29,0 30,0 424 4 Volume  4 2013 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight ØD ØA ØM Backlash Torque (Nm) Delrin Price each 1 to 5 External Bore Boss (mm) Delrin Peek Peek (kg) Delrin 11,0 4 8 0,076 - 0,037 0,20 0,27 0,001 21,60 F 11,5 4 8 0,077 - 0,036 0,21 0,29 0,001 21,82 F 12,0 4 8 0,077 - 0,036 0,23 0,31 0,001 21,55 F 12,5 4 8 0,077 - 0,036 0,24 0,33 0,001 22,34 F 13,0 5 10 0,077 - 0,036 0,26 0,35 0,001 22,60 F 13,5 5 10 0,087 - 0,042 0,27 0,37 0,002 22,84 F 14,0 5 10 0,087 - 0,042 0,29 0,39 0,002 23,17 F 14,5 5 10 0,087 - 0,042 0,30 0,41 0,002 23,42 F 15,0 5 10 0,087 - 0,042 0,31 0,43 0,002 23,65 F 15,5 6 13 0,087 - 0,042 0,33 0,45 0,002 23,81 F 16,0 6 13 0,087 - 0,042 0,35 0,47 0,003 23,89 F 17,0 6 13 0,087 - 0,042 0,37 0,51 0,003 24,49 F 18,5 6 13 0,087 - 0,042 0,42 0,57 0,003 25,31 F 20,0 6 17 0,089 - 0,041 0,46 0,63 0,005 26,06 F 21,0 6 17 0,089 - 0,041 0,50 0,68 0,005 26,65 F 22,0 6 17 0,089 - 0,041 0,53 0,72 0,005 27,15 F 23,5 6 17 0,089 - 0,041 0,57 0,78 0,005 27,97 F 25,0 6 17 0,089 - 0,041 0,62 0,84 0,006 29,05 F 26,0 6 17 0,089 - 0,041 0,65 0,89 0,006 29,38 F 27,0 6 17 0,097 - 0,046 0,68 0,93 0,006 29,82 F 28,5 6 17 0,097 - 0,046 0,73 0,99 0,007 30,41 F 30,0 6 17 0,097 - 0,046 0,78 1,06 0,007 31,04 F 31,0 6 17 0,097 - 0,046 0,81 1,10 0,008 31,35 F On request Part number Z Delrin Peek Teeth PSG0.5-20DL PSG0.5-20PK 20 PSG0.5-21DL PSG0.5-21PK 21 PSG0.5-22DL PSG0.5-22PK 22 PSG0.5-23DL PSG0.5-23PK 23 PSG0.5-24DL PSG0.5-24PK 24 PSG0.5-25DL PSG0.5-25PK 25 PSG0.5-26DL PSG0.5-26PK 26 PSG0.5-27DL PSG0.5-27PK 27 PSG0.5-28DL PSG0.5-28PK 28 PSG0.5-29DL PSG0.5-29PK 29 PSG0.5-30DL PSG0.5-30PK 30 PSG0.5-32DL PSG0.5-32PK 32 PSG0.5-35DL PSG0.5-35PK 35 PSG0.5-38DL PSG0.5-38PK 38 PSG0.5-40DL PSG0.5-40PK 40 PSG0.5-42DL PSG0.5-42PK 42 PSG0.5-45DL PSG0.5-45PK 45 PSG0.5-48DL PSG0.5-48PK 48 PSG0.5-50DL PSG0.5-50PK 50 PSG0.5-52DL PSG0.5-52PK 52 PSG0.5-55DL PSG0.5-55PK 55 PSG0.5-58DL PSG0.5-58PK 58 PSG0.5-60DL PSG0.5-60PK 60 e grade 8 HPC www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA ØM 5 10 DISCOUNTS Dimensions in mm +33(0)4 37 490 055 - cial2@hpceurope.com HPC 0,84 0,88 0,93 0,96 0,99 1,04 1,09 1,12 1,15 1,20 1,28 1,43 1,74 1,90 2,06 2,22 3,02 3,83 1,14 1,21 1,27 1,31 1,35 1,42 1,48 1,53 1,57 1,63 1,74 1,95 2,38 2,59 2,81 3,02 4,12 5,22 0,009 0,009 0,010 0,010 0,010 0,011 0,012 0,015 0,015 0,016 0,017 0,022 0,032 0,035 0,039 0,047 0,080 0,122 31,77 F 32,46 F 32,66 F 33,02 F 33,35 F 33,59 F 34,06 F 34,31 F 34,71 F 35,04 F 35,62 F 36,17 F 43,82 F 50,27 F 52,38 F 57,02 F 70,26 F 84,31 F On request ØD ØA ØM Backlash Part number Z ØP (mm) Delrin Peek Teeth Pitch External Bore Boss PSG0.5-62DL PSG0.5-62PK 62 31,0 32,0 8 20 0,098 - 0,044 PSG0.5-65DL PSG0.5-65PK 65 32,5 33,5 8 20 0,098 - 0,044 PSG0.5-68DL PSG0.5-68PK 68 34,0 35,0 8 20 0,098 - 0,044 PSG0.5-70DL PSG0.5-70PK 70 35,0 36,0 8 20 0,098 - 0,044 PSG0.5-72DL PSG0.5-72PK 72 36,0 37,0 8 20 0,098 - 0,044 PSG0.5-75DL PSG0.5-75PK 75 37,5 38,5 8 20 0,098 - 0,044 PSG0.5-78DL PSG0.5-78PK 78 39,0 40,0 8 20 0,098 - 0,044 PSG0.5-80DL PSG0.5-80PK 80 40,0 41,0 8 25 0,098 - 0,044 PSG0.5-82DL PSG0.5-82PK 82 41,0 42,0 8 25 0,098 - 0,044 PSG0.5-85DL PSG0.5-85PK 85 42,5 43,5 8 25 0,098 - 0,044 PSG0.5-90DL PSG0.5-90PK 90 45,0 46,0 8 25 0,098 - 0,044 PSG0.5-100DL PSG0.5-100PK 100 50,0 51,0 10 30 0,098 - 0,044 PSG0.5-120DL PSG0.5-120PK 120 60,0 61,0 10 35 0,111 - 0,049 PSG0.5-130DL PSG0.5-130PK 130 65,0 66,0 10 35 0,111 - 0,049 PSG0.5-140DL PSG0.5-140PK 140 70,0 71,0 10 35 0,111 - 0,049 PSG0.5-150DL PSG0.5-150PK 150 75,0 76,0 10 40 0,111 - 0,049 PSG0.5-200DL PSG0.5-200PK 200 100,0 101,0 14 50 0,113 - 0,047 PSG0.5-250DL PSG0.5-250PK 250 125,0 126,0 16 60 0,136 - 0,062 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek Volume 4 2013 4 425 prEcision Range (Quality Grade 8e) Spur gear MODULE 0.8 Delrin or Peek - Quality grade 8e DIN 58405 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only Part number Z Delrin Peek Teeth PSG0.8-18DL PSG0.8-18PK 18 PSG0.8-19DL PSG0.8-19PK 19 PSG0.8-20DL PSG0.8-20PK 20 PSG0.8-21DL PSG0.8-21PK 21 PSG0.8-22DL PSG0.8-22PK 22 PSG0.8-23DL PSG0.8-23PK 23 PSG0.8-24DL PSG0.8-24PK 24 PSG0.8-25DL PSG0.8-25PK 25 PSG0.8-26DL PSG0.8-26PK 26 PSG0.8-27DL PSG0.8-27PK 27 PSG0.8-28DL PSG0.8-28PK 28 PSG0.8-29DL PSG0.8-29PK 29 PSG0.8-30DL PSG0.8-30PK 30 PSG0.8-32DL PSG0.8-32PK 32 PSG0.8-35DL PSG0.8-35PK 35 PSG0.8-38DL PSG0.8-38PK 38 PSG0.8-40DL PSG0.8-40PK 40 PSG0.8-42DL PSG0.8-42PK 42 PSG0.8-45DL PSG0.8-45PK 45 PSG0.8-48DL PSG0.8-48PK 48 PSG0.8-50DL PSG0.8-50PK 50 PSG0.8-52DL PSG0.8-52PK 52 PSG0.8-55DL PSG0.8-55PK 55 PSG0.8-58DL PSG0.8-58PK 58 Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 14,4 16,0 5 11 0,096 - 0,047 15,2 16,8 5 11 0,096 - 0,047 16,0 17,6 5 11 0,096 - 0,047 16,8 18,4 5 12 0,096 - 0,047 17,6 19,2 5 12 0,096 - 0,047 18,4 20,0 5 12 0,097 - 0,046 19,2 20,8 6 14 0,097 - 0,046 20,0 21,6 6 14 0,097 - 0,046 20,8 22,4 6 14 0,097 - 0,046 21,6 23,2 6 14 0,097 - 0,046 22,4 24,0 8 18 0,097 - 0,046 23,2 24,8 8 18 0,097 - 0,046 24,0 25,6 8 18 0,097 - 0,046 25,6 27,2 8 18 0,108 - 0,052 28,0 29,6 10 20 0,108 - 0,052 30,4 32,0 10 20 0,109 - 0,050 32,0 33,6 10 20 0,109 - 0,050 33,6 35,2 10 20 0,109 - 0,050 36,0 37,6 10 20 0,109 - 0,050 38,4 40,0 10 30 0,109 - 0,050 40,0 41,6 10 30 0,109 - 0,050 41,6 43,2 10 30 0,109 - 0,050 44,0 45,6 10 30 0,109 - 0,050 46,4 48,0 10 30 0,109 - 0,050 426 4 Volume  4 2013 HPC e grade 8 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek Peek (kg) Delrin 0,59 0,70 0,003 21,11 F 0,64 0,78 0,003 21,44 F 0,69 0,88 0,003 21,77 F 0,74 0,98 0,004 22,44 F 0,79 1,08 0,004 22,76 F 0,84 1,15 0,004 22,87 F 0,89 1,22 0,005 22,99 F 0,95 1,29 0,005 23,93 F 1,00 1,36 0,005 24,78 F 1,05 1,43 0,006 25,31 F 1,10 1,50 0,007 25,88 F 1,16 1,58 0,007 26,56 F 1,21 1,65 0,007 26,99 F 1,31 1,79 0,008 27,72 F 1,47 2,00 0,009 28,67 F 1,63 2,22 0,011 29,80 F 1,74 2,37 0,011 30,91 F 1,84 2,51 0,012 31,14 F 2,01 2,73 0,014 31,59 F 2,17 2,96 0,021 31,85 F 2,28 3,11 0,022 35,17 F 2,39 3,26 0,023 36,21 F 2,55 3,48 0,025 37,70 F 2,72 3,71 0,027 38,84 F On request - - - - www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.8 ØD ØP ØA ØM 8 10 DISCOUNTS Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 48,0 49,6 10 40 0,109 - 0,050 49,6 51,2 10 40 0,109 - 0,050 52,0 53,6 10 40 0,122 - 0,055 54,4 56,0 10 40 0,122 - 0,055 56,0 57,6 10 40 0,122 - 0,055 57,6 59,2 10 40 0,122 - 0,055 60,0 61,6 10 50 0,122 - 0,055 62,4 64,0 10 50 0,122 - 0,055 64,0 65,6 10 50 0,122 - 0,055 65,6 67,2 10 50 0,122 - 0,055 68,0 69,6 10 50 0,122 - 0,055 72,0 73,6 10 65 0,122 - 0,055 76,0 77,6 10 65 0,122 - 0,055 80,0 81,6 14 65 0,122 - 0,055 88,0 89,6 14 70 0,123 - 0,053 96,0 97,6 14 70 0,123 - 0,053 +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Part number Z Delrin Peek Teeth PSG0.8-60DL PSG0.8-60PK 60 PSG0.8-62DL PSG0.8-62PK 62 PSG0.8-65DL PSG0.8-65PK 65 PSG0.8-68DL PSG0.8-68PK 68 PSG0.8-70DL PSG0.8-70PK 70 PSG0.8-72DL PSG0.8-72PK 72 PSG0.8-75DL PSG0.8-75PK 75 PSG0.8-78DL PSG0.8-78PK 78 PSG0.8-80DL PSG0.8-80PK 80 PSG0.8-82DL PSG0.8-82PK 82 PSG0.8-85DL PSG0.8-85PK 85 PSG0.8-90DL PSG0.8-90PK 90 PSG0.8-95DL PSG0.8-95PK 95 PSG0.8-100DL PSG0.8-100PK 100 PSG0.8-110DL PSG0.8-110PK 110 PSG0.8-120DL PSG0.8-120PK 120 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 2,83 3,86 0,036 39,74 F 2,94 4,01 0,037 41,06 F 3,10 4,22 0,040 43,99 F 3,26 4,45 0,042 46,26 F 3,37 4,59 0,043 47,23 F 3,48 4,74 0,045 48,26 F 3,64 4,97 0,057 51,47 F 3,81 5,19 0,060 52,25 F 3,92 5,35 0,062 53,32 F 4,03 5,50 0,064 54,09 F 4,20 5,72 0,066 55,22 F 4,47 6,10 0,090 57,02 F 4,75 6,48 0,096 63,11 F 5,02 6,85 0,099 63,95 F 5,56 7,59 0,119 80,08 F 6,11 8,33 0,132 90,52 F Volume 4 2013 4 427 prEcision Range (Quality Grade 8e25) Spur gear MODULE 1.0 Delrin or Peek - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - 25 rade 8e Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin g Quality .Info.. ØD ØA ØM Backlash Part number Z ØP (mm) Delrin Peek Teeth Pitch External Bore Boss PSG1.0-18DL PSG1.0-18PK 18 18 20 5 15 0,127 - 0,053 PSG1.0-19DL PSG1.0-19PK 19 19 21 5 15 0,128 - 0,052 PSG1.0-20DL PSG1.0-20PK 20 20 22 5 15 0,128 - 0,052 PSG1.0-21DL PSG1.0-21PK 21 21 23 5 15 0,128 - 0,052 PSG1.0-22DL PSG1.0-22PK 22 22 24 5 15 0,128 - 0,052 PSG1.0-23DL PSG1.0-23PK 23 23 25 5 15 0,128 - 0,052 PSG1.0-24DL PSG1.0-24PK 24 24 26 6 20 0,128 - 0,052 PSG1.0-25DL PSG1.0-25PK 25 25 27 6 20 0,128 - 0,052 PSG1.0-26DL PSG1.0-26PK 26 26 28 6 20 0,128 - 0,052 PSG1.0-27DL PSG1.0-27PK 27 27 29 6 20 0,128 - 0,052 PSG1.0-28DL PSG1.0-28PK 28 28 30 6 20 0,128 - 0,052 PSG1.0-29DL PSG1.0-29PK 29 29 31 8 25 0,128 - 0,052 PSG1.0-30DL PSG1.0-30PK 30 30 32 8 25 0,128 - 0,052 PSG1.0-32DL PSG1.0-32PK 32 32 34 8 25 0,129 - 0,051 PSG1.0-35DL PSG1.0-35PK 35 35 37 8 25 0,129 - 0,051 PSG1.0-38DL PSG1.0-38PK 38 38 40 10 34 0,129 - 0,051 PSG1.0-40DL PSG1.0-40PK 40 40 42 10 34 0,129 - 0,051 PSG1.0-42DL PSG1.0-42PK 42 42 44 10 34 0,129 - 0,051 PSG1.0-45DL PSG1.0-45PK 45 45 47 10 34 0,129 - 0,051 PSG1.0-48DL PSG1.0-48PK 48 48 50 10 34 0,129 - 0,051 PSG1.0-50DL PSG1.0-50PK 50 50 52 10 34 0,129 - 0,051 Dimensions in mm 428 4 Volume  4 2013 HPC DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 0,92 1,04 0,006 22,40 F 1,03 1,17 0,006 22,73 F 1,16 1,31 0,007 23,44 F 1,29 1,46 0,007 23,60 F 1,43 1,61 0,008 23,95 F 1,54 1,78 0,008 24,06 F 1,63 1,96 0,011 24,21 F 1,73 2,15 0,011 25,20 F 1,83 2,34 0,012 26,11 F 1,92 2,55 0,012 26,65 F 2,02 2,75 0,013 27,26 F 2,11 2,88 0,016 27,97 F 2,21 3,02 0,017 28,42 F 2,40 3,27 0,018 29,16 F 2,68 3,66 0,020 30,14 F 2,98 4,06 0,029 31,35 F 3,18 4,33 0,030 32,51 F 3,37 4,59 0,032 32,80 F 3,66 4,99 0,035 33,25 F 3,96 5,40 0,038 33,52 F 4,17 5,68 0,040 37,01 F On request - T  orque figures are for 100 rpm and are given as a guide only www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA ØM 10 12 DISCOUNTS Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 52 55 58 60 62 65 68 70 72 75 78 80 82 85 90 95 100 110 120 54 57 60 62 64 67 70 72 74 77 80 82 84 87 92 97 102 112 122 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 40 40 40 40 40 50 50 50 50 50 60 60 60 60 60 60 70 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 HPC On request Part number Z Delrin Peek Teeth PSG1.0-52DL PSG1.0-52PK 52 PSG1.0-55DL PSG1.0-55PK 55 PSG1.0-58DL PSG1.0-58PK 58 PSG1.0-60DL PSG1.0-60PK 60 PSG1.0-62DL PSG1.0-62PK 62 PSG1.0-65DL PSG1.0-65PK 65 PSG1.0-68DL PSG1.0-68PK 68 PSG1.0-70DL PSG1.0-70PK 70 PSG1.0-72DL PSG1.0-72PK 72 PSG1.0-75DL PSG1.0-75PK 75 PSG1.0-78DL PSG1.0-78PK 78 PSG1.0-80DL PSG1.0-80PK 80 PSG1.0-82DL PSG1.0-82PK 82 PSG1.0-85DL PSG1.0-85PK 85 PSG1.0-90DL PSG1.0-90PK 90 PSG1.0-95DL PSG1.0-95PK 95 PSG1.0-100DL PSG1.0-100PK 100 PSG1.0-110DL PSG1.0-110PK 110 PSG1.0-120DL PSG1.0-120PK 120 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 4,36 5,95 0,049 38,12 F 4,66 6,36 0,052 39,69 F 4,97 6,77 0,056 40,89 F 5,17 7,05 0,058 41,83 F 5,36 7,31 0,061 43,22 F 5,66 7,72 0,077 46,32 F 5,95 8,12 0,082 48,70 F 6,15 8,39 0,085 49,72 F 6,35 8,66 0,088 50,78 F 6,65 9,07 0,093 54,19 F 6,96 9,49 0,112 54,99 F 7,16 9,76 0,116 56,11 F 7,37 10,05 0,119 56,90 F 7,67 10,45 0,125 58,12 F 8,17 11,14 0,135 60,00 F 8,67 11,83 0,145 66,44 F 9,17 12,50 0,171 67,29 F 10,16 13,86 0,194 84,26 F 11,16 15,21 0,219 95,27 F Volume 4 2013 4 429 prEcision Range (Quality Grade 8e25) Spur gear MODULE 1.25 Delrin or Peek - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% de 8e25 .Options. - - - - gra Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - T  orque figures are for 100 rpm and are given as a guide only DISCOUNTS Dimensions in mm 430 4 Volume  4 2013 ØD ØA ØM Backlash External Bore Boss (mm) 25,00 6 15 0,097 - 0,046 26,25 6 15 0,097 - 0,046 27,50 6 15 0,108 - 0,052 28,75 8 20 0,108 - 0,052 30,00 8 20 0,108 - 0,052 31,25 8 20 0,108 - 0,052 32,50 8 22 0,108 - 0,052 33,75 8 22 0,109 - 0,050 35,00 8 22 0,109 - 0,050 36,25 8 22 0,109 - 0,050 37,50 8 25 0,109 - 0,050 38,75 8 25 0,109 - 0,050 40,00 8 25 0,109 - 0,050 42,50 8 25 0,109 - 0,050 46,25 10 30 0,109 - 0,050 50,00 10 30 0,109 - 0,050 52,50 10 30 0,120 - 0,057 55,00 10 30 0,122 - 0,055 58,75 10 30 0,122 - 0,055 HPC On request Part number Z ØP Delrin Peek Teeth Pitch PSG1.25-18DL PSG1.25-18PK 18 22,50 PSG1.25-19DL PSG1.25-19PK 19 23,75 PSG1.25-20DL PSG1.25-20PK 20 25,00 PSG1.25-21DL PSG1.25-21PK 21 26,25 PSG1.25-22DL PSG1.25-22PK 22 27,50 PSG1.25-23DL PSG1.25-23PK 23 28,75 PSG1.25-24DL PSG1.25-24PK 24 30,00 PSG1.25-25DL PSG1.25-25PK 25 31,25 PSG1.25-26DL PSG1.25-26PK 26 32,50 PSG1.25-27DL PSG1.25-27PK 27 33,75 PSG1.25-28DL PSG1.25-28PK 28 35,00 PSG1.25-29DL PSG1.25-29PK 29 36,25 PSG1.25-30DL PSG1.25-30PK 30 37,50 PSG1.25-32DL PSG1.25-32PK 32 40,00 PSG1.25-35DL PSG1.25-35PK 35 43,75 PSG1.25-38DL PSG1.25-38PK 38 47,50 PSG1.25-40DL PSG1.25-40PK 40 50,00 PSG1.25-42DL PSG1.25-42PK 42 52,50 PSG1.25-45DL PSG1.25-45PK 45 56,25 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Peek Delrin Peek (kg) Delrin 1,37 1,55 0,0090 27,99 F 1,54 1,75 0,0098 28,42 F 1,73 1,96 0,011 28,86 F 1,92 2,18 0,013 29,77 F 2,13 2,41 0,014 30,20 F 2,35 2,66 0,015 30,32 F 2,59 2,93 0,017 30,49 F 2,83 3,21 0,018 31,77 F 3,09 3,50 0,019 32,91 F 3,37 3,81 0,021 33,57 F 3,65 4,13 0,024 34,31 F 3,87 4,47 0,025 35,24 F 4,05 4,83 0,026 35,81 F 4,39 5,59 0,029 36,73 F 4,91 6,70 0,036 38,01 F 5,45 7,43 0,041 39,56 F 5,81 7,93 0,044 41,00 F 6,17 8,41 0,048 41,29 F 6,71 9,14 0,053 41,91 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.25 ØA ØM 12,5 Part number Z ØP Delrin Peek Teeth Pitch PSG1.25-48DL PSG1.25-48PK 48 60,00 PSG1.25-50DL PSG1.25-50PK 50 62,50 PSG1.25-52DL PSG1.25-52PK 52 65,00 PSG1.25-55DL PSG1.25-55PK 55 68,75 PSG1.25-58DL PSG1.25-58PK 58 72,50 PSG1.25-60DL PSG1.25-60PK 60 75,00 PSG1.25-62DL PSG1.25-62PK 62 77,50 PSG1.25-65DL PSG1.25-65PK 65 81,25 PSG1.25-68DL PSG1.25-68PK 68 85,00 PSG1.25-70DL PSG1.25-70PK 70 87,50 PSG1.25-72DL PSG1.25-72PK 72 90,00 PSG1.25-75DL PSG1.25-75PK 75 93,75 PSG1.25-78DL PSG1.25-78PK 78 97,50 PSG1.25-80DL PSG1.25-80PK 80 100,00 PSG1.25-82DL PSG1.25-82PK 82 102,50 PSG1.25-85DL PSG1.25-85PK 85 106,25 PSG1.25-90DL PSG1.25-90PK 90 112,50 PSG1.25-95DL PSG1.25-95PK 95 118,75 PSG1.25-100DL PSG1.25-100PK 100 125,00 PSG1.25-110DL PSG1.25-110PK 110 137,50 PSG1.25-120DL PSG1.25-120PK 120 150,00 Dimensions in mm 12,5 DISCOUNTS ØD ØA ØM Backlash External Bore Boss (mm) 62,50 10 40 0,122 - 0,055 65,00 10 40 0,122 - 0,055 67,50 10 40 0,122 - 0,055 71,25 10 40 0,122 - 0,055 75,00 10 40 0,122 - 0,055 77,50 10 50 0,122 - 0,055 80,00 10 50 0,122 - 0,055 83,75 10 50 0,123 - 0,053 87,50 10 50 0,123 - 0,053 90,00 10 50 0,123 - 0,053 92,50 10 50 0,123 - 0,053 96,25 10 60 0,123 - 0,053 100,00 10 60 0,123 - 0,053 102,50 10 60 0,138 - 0,064 105,00 10 60 0,138 - 0,064 108,75 10 60 0,138 - 0,064 115,00 10 65 0,138 - 0,064 121,25 10 65 0,138 - 0,064 127,50 14 65 0,140 - 0,062 140,00 14 70 0,140 - 0,062 152,50 14 70 0,140 - 0,062 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 7,26 9,89 0,069 42,24 F 7,63 10,40 0,073 46,62 F 7,99 10,89 0,077 48,01 F 8,54 11,64 0,084 50,03 F 9,09 12,40 0,092 51,53 F 9,47 12,91 0,109 52,71 F 9,82 13,39 0,114 54,46 F 10,36 14,13 0,123 58,37 F 10,90 14,87 0,131 61,36 F 11,27 15,36 0,137 62,63 F 11,63 15,86 0,143 64,00 F 12,18 16,61 0,168 68,27 F 12,74 17,37 0,178 69,31 F 13,11 17,88 0,185 70,71 F 13,49 18,40 0,192 71,72 F 14,04 19,14 0,203 73,25 F 14,96 20,40 0,230 75,61 F 15,88 21,66 0,250 83,70 F 16,79 22,89 0,268 84,81 F 18,61 25,37 0,323 106,21 F 20,43 27,85 0,373 120,09 F On request ØD ØP Volume 4 2013 4 431 prEcision Range (Quality Grade 8e25) Spur gear MODULE 1.5 Delrin or Peek - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% - - - - 25 rade 8e .Options. g Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. Z ØP Part number Delrin Peek Teeth Pitch PSG1.5-18DL PSG1.5-18PK 18 27,0 PSG1.5-19DL PSG1.5-19PK 19 28,5 PSG1.5-20DL PSG1.5-20PK 20 30,0 PSG1.5-21DL PSG1.5-21PK 21 31,5 PSG1.5-22DL PSG1.5-22PK 22 33,0 PSG1.5-23DL PSG1.5-23PK 23 34,5 PSG1.5-24DL PSG1.5-24PK 24 36,0 PSG1.5-25DL PSG1.5-25PK 25 37,5 PSG1.5-26DL PSG1.5-26PK 26 39,0 PSG1.5-27DL PSG1.5-27PK 27 40,5 PSG1.5-28DL PSG1.5-28PK 28 42,0 PSG1.5-29DL PSG1.5-29PK 29 43,5 PSG1.5-30DL PSG1.5-30PK 30 45,0 PSG1.5-32DL PSG1.5-32PK 32 48,0 PSG1.5-35DL PSG1.5-35PK 35 52,5 PSG1.5-38DL PSG1.5-38PK 38 57,0 PSG1.5-40DL PSG1.5-40PK 40 60,0 PSG1.5-42DL PSG1.5-42PK 42 63,0 PSG1.5-45DL PSG1.5-45PK 45 67,5 PSG1.5-48DL PSG1.5-48PK 48 72,0 ØD ØA ØM Backlash External Bore Boss (mm) 30,0 6 22 0,128 - 0,052 31,5 6 22 0,128 - 0,052 33,0 6 22 0,128 - 0,052 34,5 8 25 0,129 - 0,051 36,0 8 25 0,129 - 0,051 37,5 8 25 0,129 - 0,051 39,0 8 25 0,129 - 0,051 40,5 8 25 0,129 - 0,051 42,0 8 25 0,129 - 0,051 43,5 8 25 0,129 - 0,051 45,0 8 25 0,129 - 0,051 46,5 10 35 0,129 - 0,051 48,0 10 35 0,129 - 0,051 51,0 10 35 0,129 - 0,051 55,5 10 35 0,171 - 0,069 60,0 12 45 0,171 - 0,069 63,0 12 45 0,171 - 0,069 66,0 12 45 0,171 - 0,069 70,5 12 45 0,171 - 0,069 75,0 12 45 0,171 - 0,069 432 4 Volume  4 2013 HPC Dimensions in mm DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 1,90 2,15 0,019 29,33 F 2,14 2,43 0,020 30,43 F 2,40 2,71 0,022 31,97 F 2,67 3,02 0,025 32,24 F 2,96 3,35 0,026 32,60 F 3,27 3,70 0,028 33,21 F 3,59 4,06 0,030 33,52 F 3,93 4,45 0,031 35,26 F 4,30 4,86 0,033 36,95 F 4,67 5,29 0,035 38,12 F 5,07 5,74 0,037 39,16 F 5,49 6,21 0,048 37,31 F 5,93 6,70 0,050 40,96 F 6,86 7,76 0,055 42,39 F 7,98 9,51 0,062 43,74 F 8,86 11,47 0,082 47,92 F 9,45 12,89 0,088 49,83 F 10,03 13,67 0,094 50,05 F 10,90 14,86 0,104 51,16 F 11,79 16,08 0,114 54,66 F On request - T  orque figures are for 100 rpm and are given as a guide only www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.5 ØD ØP ØA ØM 15 15 DISCOUNTS Dimensions in mm ØD ØA ØM Backlash External Bore Boss (mm) 78,0 14 55 0,171 - 0,069 81,0 14 55 0,171 - 0,069 85,5 14 55 0,173 - 0,067 90,0 14 55 0,173 - 0,067 93,0 14 55 0,173 - 0,067 96,0 14 55 0,173 - 0,067 100,5 14 55 0,173 - 0,067 105,0 16 65 0,173 - 0,067 108,0 16 65 0,173 - 0,067 111,0 16 65 0,173 - 0,067 115,5 16 65 0,173 - 0,067 120,0 16 65 0,173 - 0,067 123,0 16 65 0,173 - 0,067 126,0 16 65 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Part number Z ØP Delrin Peek Teeth Pitch PSG1.5-50DL PSG1.5-50PK 50 75,0 PSG1.5-52DL PSG1.5-52PK 52 78,0 PSG1.5-55DL PSG1.5-55PK 55 82,5 PSG1.5-58DL PSG1.5-58PK 58 87,0 PSG1.5-60DL PSG1.5-60PK 60 90,0 PSG1.5-62DL PSG1.5-62PK 62 93,0 PSG1.5-65DL PSG1.5-65PK 65 97,5 PSG1.5-68DL PSG1.5-68PK 68 102,0 PSG1.5-70DL PSG1.5-70PK 70 105,0 PSG1.5-72DL PSG1.5-72PK 72 108,0 PSG1.5-75DL PSG1.5-75PK 75 112,5 PSG1.5-78DL PSG1.5-78PK 78 117,0 PSG1.5-80DL PSG1.5-80PK 80 120,0 PSG1.5-82DL PSG1.5-82PK 82 123,0 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 12,40 16,91 0,136 61,06 F 12,99 17,71 0,144 64,18 F 13,88 18,92 0,156 65,80 F 14,78 20,15 0,169 67,29 F 15,39 20,98 0,177 67,94 F 15,97 21,77 0,186 69,28 F 16,84 22,97 0,201 71,89 F 17,72 24,17 0,233 76,25 F 18,31 24,97 0,244 79,02 F 18,91 25,78 0,254 83,50 F 19,80 27,00 0,271 89,02 F 20,71 28,23 0,288 93,82 F 21,31 29,06 0,300 97,31 F 21,93 29,91 0,312 101,75 F Volume 4 2013 4 433 prEcision Range (Quality Grade 8e25) Spur gear MODULE 2.0 Delrin or Peek - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% - - - - 25 rade 8e g Quality .Options. Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - T  orque figures are for 100 rpm and are given as a guide only DISCOUNTS Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 36 40 10 30 0,129 - 0,051 38 42 10 30 0,129 - 0,051 40 44 10 30 0,129 - 0,051 42 46 12 35 0,129 - 0,051 44 48 12 35 0,129 - 0,051 46 50 12 35 0,129 - 0,051 48 52 12 35 0,129 - 0,051 50 54 12 35 0,129 - 0,051 52 56 12 35 0,171 - 0,069 54 58 12 35 0,171 - 0,069 56 60 12 35 0,171 - 0,069 434 4 Volume  4 2013 HPC On request Part number Z Delrin Peek Teeth PSG2.0-18DL PSG2.0-18PK 18 PSG2.0-19DL PSG2.0-19PK 19 PSG2.0-20DL PSG2.0-20PK 20 PSG2.0-21DL PSG2.0-21PK 21 PSG2.0-22DL PSG2.0-22PK 22 PSG2.0-23DL PSG2.0-23PK 23 PSG2.0-24DL PSG2.0-24PK 24 PSG2.0-25DL PSG2.0-25PK 25 PSG2.0-26DL PSG2.0-26PK 26 PSG2.0-27DL PSG2.0-27PK 27 PSG2.0-28DL PSG2.0-28PK 28 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Peek Delrin Peek (kg) Delrin 3,20 3,62 0,044 44,11 F 3,60 4,07 0,047 45,07 F 4,03 4,56 0,051 46,01 F 4,48 5,07 0,059 47,23 F 4,97 5,62 0,063 47,99 F 5,48 6,21 0,067 48,99 F 6,03 6,82 0,071 50,05 F 6,60 7,47 0,075 52,86 F 7,21 8,16 0,080 54,54 F 7,85 8,88 0,085 56,48 F 8,51 9,63 0,089 57,71 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 2.0 ØD ØP ØA ØM 20 20 DISCOUNTS Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 58 62 14 45 0,171 - 0,069 60 64 14 45 0,171 - 0,069 64 68 14 45 0,171 - 0,069 70 74 14 45 0,171 - 0,069 76 80 14 45 0,171 - 0,069 80 84 16 55 0,171 - 0,069 84 88 16 55 0,173 - 0,067 90 94 16 55 0,173 - 0,067 96 100 16 55 0,173 - 0,067 100 104 20 65 0,173 - 0,067 104 108 20 65 0,173 - 0,067 110 114 20 65 0,173 - 0,067 116 120 20 65 0,173 - 0,067 120 124 20 65 0,173 - 0,067 124 128 20 65 0,175 - 0,065 +33(0)4 37 490 055 - cial2@hpceurope.com HPC On request Part number Z Delrin Peek Teeth PSG2.0-29DL PSG2.0-29PK 29 PSG2.0-30DL PSG2.0-30PK 30 PSG2.0-32DL PSG2.0-32PK 32 PSG2.0-35DL PSG2.0-35PK 35 PSG2.0-38DL PSG2.0-38PK 38 PSG2.0-40DL PSG2.0-40PK 40 PSG2.0-42DL PSG2.0-42PK 42 PSG2.0-45DL PSG2.0-45PK 45 PSG2.0-48DL PSG2.0-48PK 48 PSG2.0-50DL PSG2.0-50PK 50 PSG2.0-52DL PSG2.0-52PK 52 PSG2.0-55DL PSG2.0-55PK 55 PSG2.0-58DL PSG2.0-58PK 58 PSG2.0-60DL PSG2.0-60PK 60 PSG2.0-62DL PSG2.0-62PK 62 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Torque (Nm) Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 9,21 10,42 0,110 59,14 F 9,95 11,25 0,115 60,45 F 11,51 13,02 0,126 65,66 F 14,10 15,96 0,144 72,49 F 17,01 19,25 0,163 79,58 F 19,13 21,64 0,196 82,92 F 21,14 24,20 0,211 85,45 F 22,99 28,36 0,234 89,18 F 24,87 32,90 0,258 96,04 F 26,15 35,66 0,296 102,81 F 27,39 37,35 0,314 106,63 F 29,27 39,91 0,342 120,43 F 31,17 42,50 0,372 127,69 F 32,45 44,26 0,393 130,92 F 33,68 45,92 0,414 134,14 F Volume 4 2013 4 435 prEcision Range (Quality Grade 8e25) Spur gear MODULE 2.5 Delrin or Peek Quality - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. ØD ØP ØA ØM Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin DISCOUNTS .Info.. 25 - T  orque figures are for 100 rpm and are given as a guide only Part number Z Delrin Peek Teeth PSG2.5-18DL PSG2.5-18PK 18 PSG2.5-19DL PSG2.5-19PK 19 PSG2.5-20DL PSG2.5-20PK 20 PSG2.5-21DL PSG2.5-21PK 21 PSG2.5-22DL PSG2.5-22PK 22 PSG2.5-23DL PSG2.5-23PK 23 PSG2.5-24DL PSG2.5-24PK 24 PSG2.5-25DL PSG2.5-25PK 25 PSG2.5-26DL PSG2.5-26PK 26 PSG2.5-27DL PSG2.5-27PK 27 PSG2.5-28DL PSG2.5-28PK 28 PSG2.5-29DL PSG2.5-29PK 29 PSG2.5-30DL PSG2.5-30PK 30 PSG2.5-32DL PSG2.5-32PK 32 PSG2.5-35DL PSG2.5-35PK 35 PSG2.5-38DL PSG2.5-38PK 38 PSG2.5-40DL PSG2.5-40PK 40 PSG2.5-42DL PSG2.5-42PK 42 PSG2.5-45DL PSG2.5-45PK 45 PSG2.5-48DL PSG2.5-48PK 48 PSG2.5-50DL PSG2.5-50PK 50 Dimensions in mm ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 45,0 47,5 50,0 52,5 55,0 57,5 60,0 62,5 65,0 67,5 70,0 72,5 75,0 80,0 87,5 95,0 100,0 105,0 112,5 120,0 125,0 436 4 Volume  4 2013 50,0 52,5 55,0 57,5 60,0 62,5 65,0 67,5 70,0 72,5 75,0 77,5 80,0 85,0 92,5 100,0 105,0 110,0 117,5 125,0 130,0 14 14 14 14 14 16 16 16 16 16 16 18 18 18 18 20 20 20 20 20 20 HPC 35 35 35 35 35 45 45 45 45 45 45 55 55 55 55 70 70 70 70 70 70 25 0,129 - 0,051 0,129 - 0,051 0,129 - 0,051 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,171 - 0,069 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,173 - 0,067 0,175 - 0,065 Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Torque (Nm) Weight Delrin Price each 1 to 5 Delrin Peek (kg) Delrin Peek 4,78 5,38 6,02 6,70 7,43 8,20 9,01 9,87 10,77 11,72 12,72 13,77 14,86 17,20 21,08 25,42 28,58 31,96 37,45 43,46 47,75 5,40 6,08 6,81 7,58 8,40 9,27 10,19 11,17 12,19 13,27 14,39 15,58 16,81 19,46 23,85 28,76 32,34 36,17 42,38 49,17 54,02 0,078 0,085 0,091 0,098 0,106 0,132 0,140 0,149 0,157 0,167 0,176 0,210 0,220 0,241 0,276 0,361 0,388 0,416 0,461 0,509 0,543 59,31 F 60,91 F 63,13 F 64,66 F 67,00 F 68,71 F 70,67 F 74,54 F 78,30 F 79,96 F 82,04 F 84,73 F 87,63 F 92,91 F 98,45 F 108,20 F 112,46 F 116,93 F 121,09 F 129,71 F 130,04 F On request - - - - e25 grade 8 www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 8e25) Spur gear MODULE 3.0 Delrin or Peek - Quality grade 8e25 DIN 3961 (AGMA Q9) - Material : Delrin POM (White) PEEK GF30® (Light brown) - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin 25 rade 8e g Quality .Info.. - T  orque figures are for 100 rpm and are given as a guide only ØD ØP ØA ØM DISCOUNTS Part number Z Delrin Peek Teeth PSG3.0-18DL PSG3.0-18PK 18 PSG3.0-19DL PSG3.0-19PK 19 PSG3.0-20DL PSG3.0-20PK 20 PSG3.0-21DL PSG3.0-21PK 21 PSG3.0-22DL PSG3.0-22PK 22 PSG3.0-23DL PSG3.0-23PK 23 PSG3.0-24DL PSG3.0-24PK 24 PSG3.0-25DL PSG3.0-25PK 25 PSG3.0-26DL PSG3.0-26PK 26 PSG3.0-27DL PSG3.0-27PK 27 PSG3.0-28DL PSG3.0-28PK 28 PSG3.0-29DL PSG3.0-29PK 29 PSG3.0-30DL PSG3.0-30PK 30 PSG3.0-32DL PSG3.0-32PK 32 PSG3.0-35DL PSG3.0-35PK 35 PSG3.0-38DL PSG3.0-38PK 38 PSG3.0-40DL PSG3.0-40PK 40 Dimensions in mm 30 ØP ØD ØA ØM Backlash Pitch External Bore Boss (mm) 54 60 14 45 0,171 - 0,069 57 63 14 45 0,171 - 0,069 60 66 14 45 0,171 - 0,069 63 69 16 55 0,171 - 0,069 66 72 16 55 0,171 - 0,069 69 75 16 55 0,171 - 0,069 72 78 16 55 0,171 - 0,069 75 81 16 55 0,171 - 0,069 78 84 16 55 0,171 - 0,069 81 87 16 55 0,173 - 0,067 84 90 16 55 0,173 - 0,067 87 93 18 70 0,173 - 0,067 90 96 18 70 0,173 - 0,067 96 102 18 70 0,173 - 0,067 105 111 18 70 0,173 - 0,067 114 120 18 70 0,173 - 0,067 120 126 18 70 0,173 - 0,067 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Weight Price each 1 to 5 Torque (Nm) Delrin Peek Delrin Peek (kg) Delrin 6,63 7,50 0,150 52,64 F 7,46 8,45 0,161 54,61 F 8,35 9,45 0,172 56,41 F 9,30 10,53 0,214 58,26 F 10,31 11,67 0,226 60,25 F 11,38 12,88 0,240 62,19 F 12,51 14,15 0,254 63,97 F 13,70 15,50 0,268 67,85 F 14,96 16,92 0,283 71,72 F 16,28 18,42 0,299 73,45 F 17,66 19,99 0,315 75,50 F 19,12 21,63 0,390 78,58 F 20,63 23,35 0,407 81,42 F 23,88 27,01 0,444 87,34 F 29,26 33,11 0,504 101,16 F 35,30 39,93 0,569 108,58 F 39,69 44,90 0,615 111,63 F On request 30 Volume 4 2013 4 437 nd rs u o Gr r gea .457 spu 440-p p. Ground spur gear p.440 prEcision Range (Quality Grade 6e) MODULE Skive hobbed spur gears 0.5 - - - - - Case hardened steel Quality grade 6e DIN 58405 (AGMA Q11) Material : 20NCD2 case hardened steel 58HRC Teeth conform to DIN 867 Tooth thickness conforms to DIN 58405 Efficiency approx 98% .Principle. rade 6e - A  fter the gears have been cut, they are hardened and then re-cut(skived) to remove any inaccuracies caused by the heat treatment. g Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Part number PSG0.5-20HC PSG0.5-21HC PSG0.5-22HC PSG0.5-23HC PSG0.5-24HC PSG0.5-25HC PSG0.5-26HC PSG0.5-27HC PSG0.5-28HC PSG0.5-29HCK PSG0.5-30HCK PSG0.5-32HCK PSG0.5-35HCK PSG0.5-38HCK PSG0.5-40HCK PSG0.5-42HCK PSG0.5-45HCK PSG0.5-48HCK PSG0.5-50HCK PSG0.5-52HCK Z Teeth Dimensions in mm 20 21 22 23 24 25 26 27 28 29 30 32 35 38 40 42 45 48 50 52 ØP Pitch 10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 16,0 17,5 19,0 20,0 21,0 22,5 24,0 25,0 26,0 ØD ØA External Bore 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 15,5 16,0 17,0 18,5 20,0 21,0 22,0 23,5 25,0 26,0 27,0 440 4 Volume  4 2013 4 4 4 4 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 HPC ØM Boss Keyway 8 8 8 8 10 10 10 10 10 13 13 13 13 17 17 17 17 17 17 17 - - - - - - - - - 2 2 2 2 2 2 2 2 2 2 2 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash (mm) 0,029 - 0,061 0,028 - 0,062 0,028 - 0,062 0,028 - 0,062 0,028 - 0,062 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,035 - 0,078 Torque Weight (Nm) (kg) 1,11 1,16 1,22 1,27 1,33 1,38 1,44 1,50 1,55 1,61 1,65 1,76 1,93 2,09 2,45 2,57 2,75 2,94 3,32 3,45 0,006 0,006 0,006 0,006 0,008 0,009 0,009 0,009 0,010 0,013 0,014 0,015 0,016 0,026 0,027 0,028 0,030 0,032 0,034 0,035 Price each 1 to 5 83,18 F 84,03 F 85,12 F 86,13 F 87,13 F 88,05 F 89,36 F 90,24 F 91,21 F 91,73 F 92,10 F 94,31 F 97,50 F 100,48 F 102,69 F 104,48 F 107,74 F 111,97 F 113,13 F 114,79 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA ØM 8 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number PSG0.5-55HCK PSG0.5-58HCK PSG0.5-60HCK PSG0.5-62HCK PSG0.5-65HCK PSG0.5-68HCK PSG0.5-70HCK PSG0.5-72HCK PSG0.5-75HCK PSG0.5-78HCK PSG0.5-80HCK PSG0.5-82HCK PSG0.5-85HCK PSG0.5-90HCK PSG0.5-100HCK PSG0.5-120HCK PSG0.5-130HCK PSG0.5-140HCK PSG0.5-150HCK PSG0.5-200HCK PSG0.5-250HCK Dimensions in mm Z Teeth 55 58 60 62 65 68 70 72 75 78 80 82 85 90 100 120 130 140 150 200 250 ØP ØD ØA Pitch External Bore 27,5 28,5 6 29,0 30,0 6 30,0 31,0 6 31,0 32,0 8 32,5 33,5 8 34,0 35,0 8 35,0 36,0 8 36,0 37,0 8 37,5 38,5 8 39,0 40,0 8 40,0 41,0 8 41,0 42,0 8 42,5 43,5 8 45,0 46,0 8 50,0 51,0 10 60,0 61,0 10 65,0 66,0 10 70,0 71,0 10 75,0 76,0 10 100,0 101,0 14 125,0 126,0 16 ØM Boss Keyway 17 2 17 2 17 2 20 2 20 2 20 2 20 2 20 2 20 2 20 2 25 2 25 2 25 2 25 2 30 3 35 3 35 3 35 3 40 3 50 5 60 5 +33(0)4 37 490 055 - cial2@hpceurope.com Backlash (mm) 0,035 - 0,078 0,035 - 0,078 0,035 - 0,078 0,033 - 0,079 0,033 - 0,079 0,033 -0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,036 - 0,094 0,039 - 0,104 HPC Torque Weight Price each (Nm) (kg) 1 to 5 3,65 0,038 117,17 F 3,85 0,040 119,59 F 4,15 0,042 120,83 F 4,29 0,048 122,36 F 4,50 0,051 125,03 F 4,70 0,054 125,82 F 4,84 0,056 127,20 F 4,98 0,058 128,35 F 5,19 0,062 129,42 F 5,40 0,065 131,29 F 5,80 0,082 131,62 F 5,95 0,084 133,70 F 6,16 0,088 135,05 F 6,53 0,095 137,30 F 7,42 0,123 139,29 F 8,90 0,177 168,77 F 9,65 0,196 193,64 F 10,39 0,217 201,69 F 11,37 0,262 219,60 F 15,32 0,444 270,68 F 19,15 0,679 324,66 F Volume 4 2013 4 441 prEcision Range (Quality Grade 6e) MODULE Skive hobbed spur gears 0.8 - - - - - Case hardened steel Quality grade 6e DIN 58405 (AGMA Q11) Material : 20NCD2 case hardened steel 58HRC Teeth conform to DIN 867 Tooth thickness conforms to DIN 58405 Efficiency approx 98% .Principle. - A  fter the gears have been cut, they are hardened and then re-cut(skived) to remove any inaccuracies caused by the heat treatment. rade 6e g Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Z ØP Teeth Pitch Part number PSG0.8-18HC 18 14,4 PSG0.8-19HC 19 15,2 PSG0.8-20HC 20 16,0 PSG0.8-21HC 21 16,8 PSG0.8-22HC 22 17,6 PSG0.8-23HC 23 18,4 PSG0.8-24HCK 24 19,2 PSG0.8-25HCK 25 20,0 PSG0.8-26HCK 26 20,8 PSG0.8-27HCK 27 21,6 PSG0.8-28HCK 28 22,4 PSG0.8-29HCK 29 23,2 PSG0.8-30HCK 30 24,0 PSG0.8-32HCK 32 25,6 PSG0.8-35HCK 35 28,0 PSG0.8-38HCK 38 30,4 PSG0.8-40HCK 40 32,0 PSG0.8-42HCK 42 33,6 PSG0.8-45HCK 45 36,0 PSG0.8-48HCK 48 38,4 Dimensions in mm ØD External 16,0 16,8 17,6 18,4 19,2 20,0 20,8 21,6 22,4 23,2 24,0 24,8 25,6 27,2 29,6 32,0 33,6 35,2 37,6 40,0 442 4 Volume  4 2013 ØA Bore 5 5 5 5 5 5 6 6 6 6 8 8 8 8 10 10 10 10 10 10 HPC ØM Boss Keyway 11 - 11 - 11 - 12 - 12 - 12 - 14 2 14 2 14 2 14 2 18 2 18 2 18 2 18 2 20 3 20 3 20 3 20 3 20 3 30 3 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash (mm) 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,030 - 0,066 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,035 - 0,078 0,035 - 0,078 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 Torque Weight (Nm) (kg) 3,46 0,015 3,65 0,016 4,53 0,017 4,76 0,020 4,98 0,021 5,21 0,023 5,44 0,026 5,66 0,028 5,90 0,029 6,13 0,031 6,35 0,037 6,58 0,039 6,76 0,041 7,21 0,045 7,89 0,052 8,57 0,059 10,03 0,064 10,53 0,069 11,28 0,077 12,04 0,117 Price each 1 to 5 81,37 F 82,58 F 83,79 F 86,45 F 87,68 F 88,11 F 88,57 F 92,29 F 95,56 F 97,56 F 99,71 F 102,32 F 104,04 F 106,73 F 110,35 F 114,85 F 119,06 F 119,93 F 121,66 F 122,69 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.8 ØD ØP ØA ØM 5 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number PSG0.8-50HCK PSG0.8-52HCK PSG0.8-55HCK PSG0.8-58HCK PSG0.8-60HCK PSG0.8-62HCK PSG0.8-65HCK PSG0.8-68HCK PSG0.8-70HCK PSG0.8-72HCK PSG0.8-75HCK PSG0.8-78HCK PSG0.8-80HCK PSG0.8-82HCK PSG0.8-85HCK PSG0.8-90HCK PSG0.8-95HCK PSG0.8-100HCK PSG0.8-110HCK PSG0.8-120HCK Dimensions in mm Z Teeth 50 52 55 58 60 62 65 68 70 72 75 78 80 82 85 90 95 100 110 120 ØP Pitch 40,0 41,6 44,0 46,4 48,0 49,6 52,0 54,4 56,0 57,6 60,0 62,4 64,0 65,6 68,0 72,0 76,0 80,0 88,0 96,0 ØD ØA External Bore 41,6 43,2 45,6 48,0 49,6 51,2 53,6 56,0 57,6 59,2 61,6 64,0 65,6 67,2 69,6 73,6 77,6 81,6 89,6 97,6 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 ØM Boss Keyway 30 30 30 30 40 40 40 40 40 40 50 50 50 50 50 65 65 65 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 Backlash (mm) 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,036 - 0,094 0,036 - 0,094 HPC Torque Weight Price each (Nm) (kg) 1 to 5 13,61 0,123 135,45 F 14,15 0,129 139,46 F 14,97 0,139 145,25 F 15,78 0,150 149,66 F 17,00 0,200 153,12 F 17,57 0,208 158,14 F 18,42 0,220 169,47 F 19,27 0,233 178,19 F 19,83 0,241 181,89 F 20,40 0,250 185,83 F 21,25 0,320 198,24 F 22,10 0,334 201,23 F 23,77 0,344 205,30 F 24,36 0,354 208,24 F 25,25 0,370 212,71 F 26,74 0,504 219,58 F 28,22 0,533 243,07 F 30,39 0,553 246,29 F 31,91 0,661 308,31 F 33,43 0,733 348,65 F Volume 4 2013 4 443 prEcision Range (Quality Grade 6e25) MODULE Skive hobbed spur gears 1.0 - - - - - Case hardened steel Quality grade 6e25 DIN 3961 (AGMA Q11) Material : 20NCD2 case hardened steel 58HRC Teeth conform to DIN 867 Tooth thickness conforms to DIN 3967 Efficiency approx 98% .Principle. gr Quality .Options. - - - - 5 ade 6e2 - A  fter the gears have been cut, they are hardened and then re-cut(skived) to remove any inaccuracies caused by the heat treatment. Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment. Part number PSG1.0-18HC PSG1.0-19HC PSG1.0-20HC PSG1.0-21HC PSG1.0-22HC PSG1.0-23HC PSG1.0-24HCK PSG1.0-25HCK PSG1.0-26HCK PSG1.0-27HCK PSG1.0-28HCK PSG1.0-29HCK PSG1.0-30HCK PSG1.0-32HCK PSG1.0-35HCK PSG1.0-38HCK PSG1.0-40HCK PSG1.0-42HCK PSG1.0-45HCK PSG1.0-48HCK Dimensions in mm Z Teeth 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35 38 40 42 45 48 ØP Pitch 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35 38 40 42 45 48 444 4 Volume  4 2013 ØD External 20 21 22 23 24 25 26 27 28 29 30 31 32 34 37 40 42 44 47 50 ØA Bore 5 5 5 5 5 5 6 6 6 6 6 8 8 8 8 10 10 10 10 10 HPC ØM Boss Keyway 15 - 15 - 15 - 15 - 15 - 15 - 20 2 20 2 20 2 20 2 20 2 25 2 25 2 25 2 25 3 34 3 34 3 34 3 34 3 34 3 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash (mm) 0,030 - 0,066 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,029 - 0,067 0,035 - 0,078 0,035 - 0,078 0,035 - 0,078 0,035 - 0,078 0,035 - 0,078 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 0,033 - 0,079 Torque Weight (Nm) (kg) 6,47 0,033 6,83 0,035 8,85 0,038 9,29 0,040 9,73 0,043 10,18 0,045 10,62 0,060 11,06 0,063 11,52 0,066 11,96 0,069 12,41 0,073 12,85 0,089 13,21 0,092 14,09 0,100 15,41 0,112 16,73 0,160 19,59 0,170 20,57 0,180 22,04 0,196 23,51 0,213 Price each 1 to 5 86,29 F 87,58 F 90,44 F 91,01 F 92,33 F 92,68 F 93,26 F 97,15 F 100,60 F 102,69 F 104,98 F 107,74 F 109,53 F 112,33 F 116,18 F 120,92 F 125,37 F 126,31 F 128,07 F 129,13 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA ØM 10 12 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number PSG1.0-50HCK PSG1.0-52HCK PSG1.0-55HCK PSG1.0-58HCK PSG1.0-60HCK PSG1.0-62HCK PSG1.0-65HCK PSG1.0-68HCK PSG1.0-70HCK PSG1.0-72HCK PSG1.0-75HCK PSG1.0-78HCK PSG1.0-80HCK PSG1.0-82HCK PSG1.0-85HCK PSG1.0-90HCK PSG1.0-95HCK PSG1.0-100HCK PSG1.0-110HCK PSG1.0-120HCK Z Teeth Dimensions in mm 50 52 55 58 60 62 65 68 70 72 75 78 80 82 85 90 95 100 110 120 ØP Pitch 50 52 55 58 60 62 65 68 70 72 75 78 80 82 85 90 95 100 110 120 ØD ØA External Bore 52 54 57 60 62 64 67 70 72 74 77 80 82 84 87 92 97 102 112 122 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 ØM Boss Keyway 34 40 40 40 40 40 50 50 50 50 50 60 60 60 60 60 60 70 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 Backlash (mm) 0,033 - 0,079 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,038 - 0,092 0,036 - 0,094 0,036 - 0,094 0,036 - 0,094 0,036 - 0,094 0,036 - 0,094 0,040 - 0,102 0,040 - 0,102 HPC Torque Weight Price each (Nm) (kg) 1 to 5 26,57 0,225 142,54 F 27,64 0,270 146,77 F 29,23 0,290 152,89 F 30,82 0,311 157,52 F 33,20 0,325 161,22 F 34,31 0,340 166,48 F 35,97 0,430 178,36 F 37,63 0,455 187,59 F 38,73 0,472 191,47 F 39,84 0,489 195,63 F 41,50 0,516 208,68 F 43,16 0,626 211,87 F 46,42 0,645 216,10 F 47,58 0,665 219,20 F 49,32 0,696 223,91 F 52,22 0,750 231,11 F 55,12 0,807 255,83 F 59,36 0,950 259,23 F 65,30 1,079 324,51 F 71,24 1,220 366,95 F Volume 4 2013 4 445 prEcision Range (Quality Grade 6e25) MODULE Skive hobbed spur gears 1.25 - - - - - Case hardened steel Quality grade 6e25 DIN 3961 (AGMA Q11) Material : 20NCD2 case hardened steel 58HRC Teeth conform to DIN 867 Tooth thickness conforms to DIN 3967 Efficiency approx 98% .Principle. - A  fter the gears have been cut, they are hardened and then re-cut(skived) to remove any inaccuracies caused by the heat treatment. .Options. - - - - 25 rade 6e g Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment. Z ØP ØD Teeth Pitch External Part number PSG1.25-18HCK 18 22,50 25,00 PSG1.25-19HCK 19 23,75 26,25 PSG1.25-20HCK 20 25,00 27,50 PSG1.25-21HCK 21 26,25 28,75 PSG1.25-22HCK 22 27,50 30,00 PSG1.25-23HCK 23 28,75 31,25 PSG1.25-24HCK 24 30,00 32,50 PSG1.25-25HCK 25 31,25 33,75 PSG1.25-26HCK 26 32,50 35,00 PSG1.25-27HCK 27 33,75 36,25 PSG1.25-28HCK 28 35,00 37,50 PSG1.25-29HCK 29 36,25 38,75 PSG1.25-30HCK 30 37,50 40,00 PSG1.25-32HCK 32 40,00 42,50 PSG1.25-35HCK 35 43,75 46,25 PSG1.25-38HCK 38 47,50 50,00 PSG1.25-40HCK 40 50,00 52,50 PSG1.25-42HCK 42 52,50 55,00 PSG1.25-45HCK 45 56,25 58,75 PSG1.25-48HCK 48 60,00 62,50 Dimensions in mm 446 4 Volume  4 2013 ØA Bore 6 6 6 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 HPC ØM Boss Keyway 15 2 15 2 15 2 20 2 20 2 20 2 22 2 22 2 22 2 22 2 25 2 25 2 25 2 25 2 30 3 30 3 30 3 30 3 30 3 40 3 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash (mm) 0,097 - 0,046 0,097 - 0,046 0,108 - 0,052 0,108 - 0,052 0,108 - 0,052 0,108 - 0,052 0,108 - 0,052 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,109 - 0,050 0,120 - 0,057 0,122 - 0,055 0,122 - 0,055 0,122 - 0,055 Torque Weight (Nm) (kg) 12,08 0,050 12,75 0,055 16,97 0,059 17,82 0,073 18,67 0,079 19,52 0,084 20,36 0,096 21,21 0,102 22,50 0,108 23,37 0,114 24,23 0,132 25,10 0,138 25,80 0,145 27,52 0,160 30,10 0,200 32,68 0,226 38,26 0,245 40,17 0,264 43,04 0,296 45,91 0,383 Price each 1 to 5 107,34 F 109,56 F 111,16 F 114,66 F 116,32 F 116,85 F 117,49 F 122,38 F 126,76 F 129,36 F 132,28 F 135,72 F 138,01 F 141,56 F 146,37 F 152,32 F 157,94 F 159,07 F 161,39 F 162,77 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.25 ØD ØP ØA ØM 12,5 12,5 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Z Part number Teeth PSG1.25-50HCK 50 PSG1.25-52HCK 52 PSG1.25-55HCK 55 PSG1.25-58HCK 58 PSG1.25-60HCK 60 PSG1.25-62HCK 62 PSG1.25-65HCK 65 PSG1.25-68HCK 68 PSG1.25-70HCK 70 PSG1.25-72HCK 72 PSG1.25-75HCK 75 PSG1.25-78HCK 78 PSG1.25-80HCK 80 PSG1.25-82HCK 82 PSG1.25-85HCK 85 PSG1.25-90HCK 90 PSG1.25-95HCK 95 PSG1.25-100HCK 100 PSG1.25-110HCK 110 PSG1.25-120HCK 120 Dimensions in mm ØP Pitch 62,50 65,00 68,75 72,50 75,00 77,50 81,25 85,00 87,50 90,00 93,75 97,50 100,00 102,50 106,25 112,50 118,75 125,00 137,50 150,00 ØD ØA External Bore 65,00 67,50 71,25 75,00 77,50 80,00 83,75 87,50 90,00 92,50 96,25 100,00 102,50 105,00 108,75 115,00 121,25 127,50 140,00 152,50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 14 14 14 ØM Boss Keyway 40 40 40 40 50 50 50 50 50 50 60 60 60 60 60 65 65 65 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 Backlash (mm) 0,122 - 0,055 0,122 - 0,055 0,122 - 0,055 0,122 - 0,055 0,122 - 0,055 0,122 - 0,055 0,123 - 0,053 0,123 - 0,053 0,123 - 0,053 0,123 - 0,053 0,123 - 0,053 0,123 - 0,053 0,138 - 0,064 0,138 - 0,064 0,138 - 0,064 0,138 - 0,064 0,138 - 0,064 0,140 - 0,062 0,140 - 0,062 0,140 - 0,062 HPC Torque Weight (Nm) (kg) 51,90 53,98 57,09 60,20 64,85 67,01 70,25 73,49 75,65 77,82 81,06 84,30 90,66 92,92 96,32 101,99 107,66 115,95 121,74 127,54 Price each 1 to 5 0,407 179,64 F 0,431 184,96 F 0,469 192,69 F 0,510 198,52 F 0,608 203,09 F 0,637 209,77 F 0,683 224,79 F 0,731 236,37 F 0,764 241,27 F 0,798 246,48 F 0,935 262,94 F 0,991 266,91 F 1,029 272,30 F 1,067 276,18 F 1,128 282,15 F 1,281 291,21 F 1,392 322,39 F 1,494 326,66 F 1,798 408,90 F 2,075 462,41 F Volume 4 2013 4 447 Ground spur gear Heat treated steel Module 1,0 - G  round spur gear, precision JIS B1702 grade 3 - Pressure angle 20° - Material: steel S45C - Tooth surfaces induction hardened - Surface hardness 48-53HRC - Datum reference surface for teeth grinding: bore G G 8 18 ØA ØB ØC ØD 10 discounts 11+ Qty. 1+ 6+ Disc. List -10% On request Part number GG1-15 GG1-16 GG1-17 GG1-18 GG1-19 GG1-20 GG1-21 GG1-22 GG1-23 GG1-24 Z Teeth 15 16 17 18 19 20 21 22 23 24 Dimensions in mm ØP PCD 15 16 17 18 19 20 21 22 23 24 448 4 Volume  4 2013 ØD Outside 17 18 19 20 21 22 23 24 25 26 HPC ØM Boss 12 13 14 15 16 17 18 18 20 20 ØA Bore 6 6 6 6 6 6 8 8 8 8 Backlash (mm) 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 Weight (kg) 0,02 0,02 0,02 0,03 0,03 0,03 0,04 0,04 0,04 0,05 Price each 1 to 5 84,59 F 87,30 F 90,04 F 92,11 F 95,52 F 96,52 F 99,25 F 101,00 F 104,72 F 107,82 F www.hpceurope.com - +33(0)4 37 496 496 Z Part number Teeth GG1-25 25 GG1-26 26 GG1-27 27 GG1-28 28 GG1-29 29 GG1-30 30 GG1-32 32 GG1-34 34 GG1-35 35 GG1-36 36 GG1-38 38 GG1-40 40 GG1-42 42 GG1-44 44 GG1-45 45 GG1-48 48 GG1-50 50 GG1-55 55 GG1-56 56 GG1-60 60 GG1-64 64 GG1-70 70 GG1-75 75 GG1-80 80 GG1-90 90 GG1-100 100 GG1-120 120 Dimensions in mm ØP PCD 25 26 27 28 29 30 32 34 35 36 38 40 42 44 45 48 50 55 56 60 64 70 75 80 90 100 120 ØD Outside 27 28 29 30 31 32 34 36 37 38 40 42 44 46 47 50 52 57 58 62 66 72 77 82 92 102 122 ØM Boss 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 35 35 35 40 40 40 40 50 50 50 50 +33(0)4 37 490 055 - cial2@hpceurope.com ØA Bore 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 15 15 15 15 HPC Backlash Weight Price each (mm) (kg) 1 to 5 0,08-0,16 0,05 110,17 F 0,08-0,16 0,05 112,88 F 0,08-0,16 0,05 115,30 F 0,08-0,16 0,06 117,69 F 0,08-0,16 0,07 122,83 F 0,08-0,16 0,07 124,51 F 0,08-0,16 0,08 126,53 F 0,08-0,16 0,08 131,67 F 0,08-0,16 0,09 134,37 F 0,08-0,16 0,09 137,12 F 0,08-0,16 0,12 141,92 F 0,08-0,16 0,12 144,98 F 0,08-0,16 0,13 147,37 F 0,08-0,16 0,14 152,50 F 0,08-0,16 0,15 156,29 F 0,08-0,16 0,16 167,83 F 0,08-0,16 0,18 173,68 F 0,10-0,18 0,21 189,38 F 0,10-0,18 0,22 191,73 F 0,10-0,18 0,26 205,02 F 0,10-0,18 0,29 220,08 F 0,10-0,18 0,32 237,50 F 0,10-0,18 0,36 253,86 F 0,10-0,18 0,45 271,94 F 0,10-0,18 0,53 305,07 F 0,10-0,18 0,63 358,95 F 0,12-0,20 0,84 438,16 F Volume 4 2013 4 449 Ground spur gear Heat treated steel Module 1,5 - G  round spur gear, precision JIS B1702 grade 3 - Pressure angle 20° - Material: steel S45C - Tooth surfaces induction hardened - Surface hardness 48-53HRC - Datum reference surface for teeth grinding: bore G G 15 29 ØA ØB ØC ØD 14 discounts 11+ Qty. 1+ 6+ Disc. List -10% On request Z Part number Teeth GG1.5-14 14 GG1.5-15 15 GG1.5-16 16 GG1.5-17 17 GG1.5-18 18 GG1.5-19 19 GG1.5-20 20 GG1.5-21 21 GG1.5-22 22 GG1.5-23 23 Dimensions in mm ØP PCD 21,0 22,5 24,0 25,5 27,0 28,5 30,0 31,5 33,0 34,5 450 4 Volume  4 2013 ØD Outside 24,0 25,5 27,0 28,5 30,0 31,5 33,0 34,5 36,0 37,5 ØM Boss 17 18 20 21 22 23 24 25 26 27 ØA Bore 10 10 10 10 10 10 10 10 12 12 Backlash (mm) 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 Weight (kg) 0,06 0,07 0,08 0,08 0,10 0,10 0,13 0,13 0,15 0,15 HPC www.hpceurope.com - +33(0)4 37 496 496 Price each 1 to 5 89,35 F 90,73 F 95,52 F 97,56 F 99,94 F 106,38 F 111,53 F 114,63 F 116,63 F 120,41 F Z Part number Teeth GG1.5-24 24 GG1.5-25 25 GG1.5-26 26 GG1.5-27 27 GG1.5-28 28 GG1.5-29 29 GG1.5-30 30 GG1.5-32 32 GG1.5-34 34 GG1.5-35 35 GG1.5-36 36 GG1.5-38 38 GG1.5-40 40 GG1.5-42 42 GG1.5-44 44 GG1.5-45 45 GG1.5-48 48 GG1.5-50 50 GG1.5-55 55 GG1.5-56 56 GG1.5-60 60 GG1.5-64 64 GG1.5-70 70 GG1.5-75 75 GG1.5-80 80 GG1.5-90 90 GG1.5-100 100 Dimensions in mm ØP PCD 36,0 37,5 39,0 40,5 42,0 43,5 45,0 48,0 51,0 52,5 54,0 57,0 60,0 63,0 66,0 67,5 72,0 75,0 82,5 84,0 90,0 96,0 105,0 112,5 120,0 135,0 150,0 ØD Outside 39,0 40,5 42,0 43,5 45,0 46,5 48,0 51,0 54,0 55,5 57,0 60,0 63,0 66,0 69,0 70,5 75,0 78,0 85,5 87,0 93,0 99,0 108,0 115,5 123,0 138,0 153,0 ØM Boss 28 30 32 34 36 37 38 40 42 42 45 45 50 50 50 50 50 60 60 60 60 60 60 60 70 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com ØA Bore 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 20 20 20 20 20 20 20 HPC Backlash (mm) 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,16 0,08-0,18 0,08-0,18 0,08-0,18 0,08-0,18 0,08-0,18 0,08-0,18 0,08-0,18 0,10-0,18 0,10-0,18 0,10-0,18 0,10-0,18 0,10-0,18 0,10-0,18 0,10-0,18 0,12-0,20 0,12-0,20 0,12-0,20 0,12-0,20 0,12-0,20 Weight (kg) 0,18 0,20 0,20 0,21 0,25 0,25 0,29 0,33 0,35 0,39 0,43 0,44 0,53 0,54 0,58 0,61 0,67 0,80 0,92 0,92 1,00 1,10 1,30 1,40 1,70 2,00 2,40 Price each 1 to 5 124,51 F 131,67 F 133,11 F 135,80 F 136,77 F 137,81 F 139,54 F 148,74 F 155,94 F 157,28 F 158,99 F 163,11 F 169,57 F 178,77 F 186,63 F 190,74 F 203,37 F 209,15 F 229,95 F 233,73 F 253,86 F 278,08 F 297,51 F 324,50 F 349,43 F 404,36 F 481,18 F Volume 4 2013 4 451 Ground spur gear Heat treated steel Module 2,0 - G  round spur gear, precision JIS B1702 grade 3 - Pressure angle 20° - Material: steel S45C - Tooth surfaces induction hardened - Surface hardness 48-53HRC - Datum reference surface for teeth grinding: bore G G 20 36 ØA ØB ØC ØD 16 discounts 11+ Qty. 1+ 6+ Disc. List -10% On request Z Part number Teeth GG2-14 14 GG2-15 15 GG2-16 16 GG2-17 17 GG2-18 18 GG2-19 19 GG2-20 20 GG2-21 21 GG2-22 22 GG2-23 23 Dimensions in mm ØP PCD 28 30 32 34 36 38 40 42 44 46 452 4 Volume  4 2013 ØD Outside 32 34 36 38 40 42 44 46 48 50 ØM Boss 22 24 26 28 30 31 32 34 36 37 ØA Bore 12 12 12 12 12 12 15 15 15 15 Backlash (mm) 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 Weight (kg) 0,10 0,18 0,18 0,19 0,25 0,24 0,31 0,28 0,38 0,35 HPC www.hpceurope.com - +33(0)4 37 496 496 Price each 1 to 5 107,43 F 111,53 F 115,30 F 120,41 F 124,51 F 127,59 F 128,28 F 128,95 F 132,36 F 138,51 F Z Part number Teeth GG2-24 24 GG2-25 25 GG2-26 26 GG2-27 27 GG2-28 28 GG2-29 29 GG2-30 30 GG2-32 32 GG2-34 34 GG2-35 35 GG2-36 36 GG2-38 38 GG2-40 40 GG2-42 42 GG2-44 44 GG2-45 45 GG2-48 48 GG2-50 50 GG2-55 55 GG2-56 56 GG2-60 60 GG2-64 64 GG2-70 70 GG2-75 75 GG2-80 80 GG2-90 90 GG2-100 100 Dimensions in mm ØP PCD 48 50 52 54 56 58 60 64 68 70 72 76 80 84 88 90 96 100 110 112 120 128 140 150 160 180 200 ØD Outside 52 54 56 58 60 62 64 68 72 74 76 80 84 88 92 94 100 104 114 116 124 132 144 154 164 184 204 ØM Boss 38 40 42 44 45 48 50 50 50 50 50 50 60 60 60 60 60 60 60 60 65 65 70 70 80 80 80 +33(0)4 37 490 055 - cial2@hpceurope.com ØA Bore 15 15 15 15 15 15 18 18 18 18 18 18 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 HPC Backlash Weight Price each (mm) (kg) 1 to 5 0,10-0,20 0,45 141,57 F 0,10-0,20 0,49 142,62 F 0,12-0,22 0,46 151,48 F 0,12-0,22 0,50 152,84 F 0,12-0,22 0,61 157,93 F 0,12-0,22 0,59 159,35 F 0,12-0,22 0,67 163,11 F 0,12-0,22 0,74 169,26 F 0,12-0,22 0,75 180,83 F 0,12-0,22 0,84 187,95 F 0,12-0,22 0,88 190,05 F 0,12-0,22 0,89 203,03 F 0,12-0,22 1,10 222,81 F 0,12-0,22 1,10 229,65 F 0,12-0,22 1,20 242,96 F 0,12-0,22 1,30 250,10 F 0,12-0,22 1,50 272,67 F 0,12-0,22 1,60 281,87 F 0,14-0,24 1,70 310,83 F 0,14-0,24 1,80 316,33 F 0,14-0,24 2,20 345,63 F 0,14-0,24 2,30 378,79 F 0,14-0,24 2,90 417,32 F 0,14-0,24 3,10 464,40 F 0,14-0,24 3,80 492,75 F 0,14-0,24 4,50 583,56 F 0,14-0,24 5,40 684,57 F Volume 4 2013 4 453 Ground spur gear Heat treated steel Module 2,5 - G  round spur gear, precision JIS B1702 grade 3 - Pressure angle 20° - Material: steel S45C - Tooth surfaces induction hardened - Surface hardness 48-53HRC - Datum reference surface for teeth grinding: bore G G 25 43 ØA ØB ØC ØD 18 discounts 11+ Qty. 1+ 6+ Disc. List -10% On request Z Part number Teeth GG2.5-14 14 GG2.5-15 15 GG2.5-16 16 GG2.5-17 17 GG2.5-18 18 GG2.5-19 19 GG2.5-20 20 GG2.5-21 21 GG2.5-22 22 GG2.5-23 23 Dimensions in mm ØP PCD 35,0 37,5 40,0 42,5 45,0 47,5 50,0 52,5 55,0 57,5 454 4 Volume  4 2013 ØD Outside 40,0 42,5 45,0 47,5 50,0 52,5 55,0 57,5 60,0 62,5 ØM Boss 28 30 32 35 38 39 40 42 44 46 ØA Bore 15 15 15 15 15 15 18 18 18 18 Backlash (mm) 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,10-0,20 0,12-0,22 0,12-0,22 0,12-0,22 Weight (kg) 0,28 0,33 0,38 0,36 0,50 0,46 0,55 0,54 0,60 0,66 HPC www.hpceurope.com - +33(0)4 37 496 496 Price each 1 to 5 116,03 F 121,13 F 129,95 F 134,05 F 141,57 F 147,69 F 158,29 F 162,06 F 170,91 F 175,68 F Z Part number Teeth GG2.5-24 24 GG2.5-25 25 GG2.5-26 26 GG2.5-27 27 GG2.5-28 28 GG2.5-29 29 GG2.5-30 30 GG2.5-32 32 GG2.5-34 34 GG2.5-35 35 GG2.5-36 36 GG2.5-38 38 GG2.5-40 40 GG2.5-42 42 GG2.5-44 44 GG2.5-45 45 GG2.5-48 48 GG2.5-50 50 GG2.5-55 55 GG2.5-56 56 GG2.5-60 60 GG2.5-70 70 GG2.5-75 75 GG2.5-80 80 ØM Boss 48 50 54 56 60 60 65 70 70 70 70 70 70 75 75 75 75 80 80 80 80 80 90 90 ØA Bore 18 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Dimensions in mm ØP PCD 60,0 62,5 65,0 67,5 70,0 72,5 75,0 80,0 85,0 87,5 90,0 95,0 100,0 105,0 110,0 112,5 120,0 125,0 137,5 140,0 150,0 175,0 187,5 200,0 ØD Outside 65,0 67,5 70,0 72,5 75,0 77,5 80,0 85,0 90,0 92,5 95,0 100,0 105,0 110,0 115,0 117,5 125,0 130,0 142,5 145,0 155,0 180,0 192,5 205,0 Backlash (mm) 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 Weight (kg) 0,81 0,93 0,87 0,94 1,20 1,10 1,30 1,50 1,60 1,70 1,80 1,80 2,10 2,20 2,30 2,60 2,80 3,10 3,50 3,60 4,20 5,30 6,20 6,90 Price each 1 to 5 184,56 F 190,74 F 201,35 F 205,76 F 214,98 F 221,11 F 231,68 F 245,38 F 262,06 F 266,17 F 281,49 F 300,61 F 313,24 F 334,42 F 344,96 F 350,79 F 377,75 F 400,64 F 439,88 F 450,76 F 496,50 F 620,42 F 682,56 F 762,70 F Volume 4 2013 4 455 Ground spur gear Heat treated steel Module 3,0 - G  round spur gear, precision JIS B1702 grade 3 - Pressure angle 20° - Material: steel S45C - Tooth surfaces induction hardened - Surface hardness 48-53HRC - Datum reference surface for teeth grinding: bore G G 30 50 ØA ØB ØC ØD 20 discounts 11+ Qty. 1+ 6+ Disc. List -10% On request Z Part number Teeth GG3-14 14 GG3-15 15 GG3-16 16 GG3-17 17 GG3-18 18 GG3-19 19 GG3-20 20 GG3-21 21 GG3-22 22 GG3-23 23 Dimensions in mm ØP PCD 42 45 48 51 54 57 60 63 66 69 456 4 Volume  4 2013 ØD Outside 48 51 54 57 60 63 66 69 72 75 ØM Boss 34 36 38 37 40 45 50 52 54 56 ØA Bore 16 16 16 16 16 16 20 20 20 20 Backlash (mm) 0,10-0,20 0,10-0,20 0,10-0,20 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 Weight (kg) 0,51 0,58 0,66 0,57 0,80 0,77 0,98 0,94 1,20 1,10 HPC www.hpceurope.com - +33(0)4 37 496 496 Price each 1 to 5 148,42 F 150,78 F 156,96 F 162,40 F 171,25 F 182,19 F 190,41 F 202,70 F 208,46 F 220,75 F Z Part number Teeth GG3-24 24 GG3-25 25 GG3-26 26 GG3-27 27 GG3-28 28 GG3-29 29 GG3-30 30 GG3-32 32 GG3-34 34 GG3-35 35 GG3-36 36 GG3-38 38 GG3-40 40 GG3-42 42 GG3-44 44 GG3-45 45 GG3-48 48 GG3-50 50 GG3-55 55 GG3-56 56 GG3-60 60 GG3-70 70 GG3-75 75 GG3-80 80 Dimensions in mm ØP PCD 72 75 78 81 84 87 90 96 102 105 108 114 120 126 132 135 144 150 165 168 180 210 225 240 ØD Outside 78 81 84 87 90 93 96 102 108 111 114 120 126 132 138 141 150 156 171 174 186 216 231 246 ØM Boss 58 60 62 65 70 70 75 75 75 80 80 80 80 80 80 80 85 85 90 90 100 100 100 100 +33(0)4 37 490 055 - cial2@hpceurope.com ØA Bore 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 HPC Backlash (mm) 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,12-0,22 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 0,14-0,24 Weight (kg) 1,40 1,50 1,50 1,60 2,00 1,90 2,20 2,40 2,40 2,90 3,00 3,00 3,50 3,50 3,80 4,20 5,30 5,60 5,90 6,00 7,40 9,10 10,30 11,60 Price each 1 to 5 225,53 F 235,76 F 252,54 F 257,24 F 268,88 F 276,42 F 291,08 F 315,31 F 343,98 F 349,77 F 357,61 F 384,60 F 405,06 F 434,02 F 448,39 F 468,16 F 514,63 F 531,32 F 642,22 F 648,07 F 696,85 F 869,57 F 976,68 F 1 072,95 F Volume 4 2013 4 457 n s o i s i ear c e Pr cal g .481 p li he .460- p Parallel helical gear p.460 Crossed helical gear p.472 prEcision Range (Quality Grade 7e) MODULE Parallel helical gear 0.5 Pre-treated or case hardened steel - Quality grade 7e DIN 58405 (AGMA Q10) - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e grade 7 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. Part number Z ØP ØD ØA Standard Hardened Teeth Pitch External Bore PHG0.5-20R PHG0.5-20RH 20 10,35 11,35 4 PHG0.5-21R PHG0.5-21RH 21 10,87 11,87 4 PHG0.5-22R PHG0.5-22RH 22 11,39 12,39 4 PHG0.5-23R PHG0.5-23RH 23 11,91 12,91 4 PHG0.5-24R PHG0.5-24RH 24 12,42 13,42 5 PHG0.5-25R PHG0.5-25RH 25 12,94 13,94 5 PHG0.5-26R PHG0.5-26RH 26 13,46 14,46 5 PHG0.5-27R PHG0.5-27RH 27 13,98 14,98 5 PHG0.5-28R PHG0.5-28RH 28 14,49 15,49 5 PHG0.5-29R PHG0.5-29RH 29 15,01 16,01 6 PHG0.5-30R PHG0.5-30RH 30 15,53 16,53 6 PHG0.5-32R PHG0.5-32RH 32 16,56 17,56 6 PHG0.5-35R PHG0.5-35RH 35 18,12 19,12 6 PHG0.5-38R PHG0.5-38RH 38 19,67 20,67 6 PHG0.5-40R PHG0.5-40RH 40 20,71 21,71 6 PHG0.5-42R PHG0.5-42RH 42 21,74 22,74 6 PHG0.5-45R PHG0.5-45RH 45 23,29 24,29 6 PHG0.5-48R PHG0.5-48RH 48 24,85 25,85 6 PHG0.5-50R PHG0.5-50RH 50 25,88 26,88 6 Dimensions in mm 460 4 Volume  4 2013 HPC ØM Backlash Boss (mm) 8 0,079 - 0,037 8 0,079 - 0,037 8 0,079 - 0,037 8 0,079 - 0,037 10 0,091 - 0,044 10 0,091 - 0,044 10 0,091 - 0,044 10 0,091 - 0,044 10 0,091 - 0,044 13 0,091 - 0,044 13 0,091 - 0,044 13 0,091 - 0,044 13 0,092 - 0,043 18 0,092 - 0,043 18 0,092 - 0,043 18 0,092 - 0,043 18 0,092 - 0,043 18 0,092 - 0,043 18 0,100 - 0,047 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 0,34 1,25 0,006 29,03 F 47,96 F 0,36 1,31 0,007 29,33 F 48,45 F 0,37 1,37 0,007 29,86 F 49,26 F 0,39 1,43 0,007 30,14 F 49,72 F 0,41 1,50 0,009 30,52 F 50,33 F 0,43 1,56 0,009 30,81 F 50,86 F 0,56 1,79 0,009 31,30 F 51,67 F 0,58 1,86 0,010 31,57 F 52,14 F 0,60 1,92 0,010 31,99 F 52,86 F 0,62 1,99 0,015 32,14 F 53,02 F 0,73 2,05 0,015 32,21 F 53,20 F 0,78 2,19 0,016 32,93 F 54,36 F 0,85 2,39 0,018 34,06 F 56,24 F 0,93 2,60 0,028 35,24 F 58,20 F 1,25 3,04 0,030 35,91 F 59,26 F 1,31 3,19 0,031 36,57 F 60,37 F 1,40 3,42 0,033 37,70 F 62,23 F 1,50 3,65 0,036 38,84 F 64,11 F 1,95 4,12 0,037 39,56 F 65,24 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA 5 ØM 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PHG0.5-52R PHG0.5-52RH 52 26,92 PHG0.5-55R PHG0.5-55RH 55 28,47 PHG0.5-58R PHG0.5-58RH 58 30,02 PHG0.5-60R PHG0.5-60RH 60 31,06 PHG0.5-62R PHG0.5-62RH 62 32,09 PHG0.5-65R PHG0.5-65RH 65 33,65 PHG0.5-68R PHG0.5-68RH 68 35,20 PHG0.5-70R PHG0.5-70RH 70 36,23 PHG0.5-72R PHG0.5-72RH 72 37,27 PHG0.5-75R PHG0.5-75RH 75 38,82 PHG0.5-78R PHG0.5-78RH 78 40,38 PHG0.5-80R PHG0.5-80RH 80 41,41 PHG0.5-82R PHG0.5-82RH 82 42,45 PHG0.5-85R PHG0.5-85RH 85 44,00 PHG0.5-90R PHG0.5-90RH 90 46,59 PHG0.5-100R PHG0.5-100RH 100 51,76 PHG0.5-120R PHG0.5-120RH 120 62,12 PHG0.5-130R PHG0.5-130RH 130 67,29 PHG0.5-140R PHG0.5-140RH 140 72,47 PHG0.5-150R PHG0.5-150RH 150 77,65 PHG0.5-200R PHG0.5-200RH 200 103,53 PHG0.5-230R PHG0.5-230RH 230 119,06 ØD ØA ØM External Bore Boss 27,92 6 25 29,47 6 25 31,02 6 25 32,06 6 25 33,09 6 25 34,65 6 25 36,20 6 25 37,23 6 25 38,27 6 25 39,82 6 25 41,38 8 35 42,41 8 35 43,45 8 35 45,00 8 35 47,59 8 35 52,76 8 35 63,12 8 35 68,29 12 45 73,47 12 45 78,65 12 45 104,53 14 55 120,06 16 65 Backlash (mm) 0,100 - 0,047 0,100 - 0,047 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,102 - 0,046 0,115 - 0,097 0,115 - 0,097 0,115 - 0,097 0,115 - 0,097 0,115 - 0,097 0,139 - 0,066 0,139 - 0,066 Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 2,03 4,29 0,057 40,14 F 66,21 F 2,15 4,53 0,060 40,96 F 67,66 F 2,27 4,78 0,063 41,77 F 68,99 F 2,67 5,15 0,065 42,39 F 69,95 F 2,76 5,32 0,067 42,86 F 70,71 F 2,89 5,58 0,070 43,71 F 72,15 F 3,03 5,84 0,073 44,21 F 73,01 F 3,11 6,01 0,075 44,44 F 73,33 F 3,20 6,18 0,078 44,96 F 74,14 F 3,34 6,44 0,081 45,29 F 74,72 F 3,47 6,69 0,119 46,06 F 76,04 F 4,60 7,20 0,122 46,28 F 76,38 F 4,71 7,38 0,125 46,70 F 77,08 F 4,89 7,65 0,129 47,17 F 77,86 F 5,17 8,10 0,136 48,06 F 79,31 F 5,89 9,21 0,151 48,81 F 80,51 F 7,07 11,05 0,188 59,03 F 97,45 F 7,66 11,97 0,251 67,21 F 110,91 F 8,25 12,89 0,273 70,60 F 116,54 F 9,03 14,11 0,297 77,98 F 128,70 F 12,17 19,01 0,498 94,93 F 156,64 F 13,99 21,86 0,673 106,21 F 175,29 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 461 Dimensions in mm prEcision Range (Quality Grade 7e25) MODULE Parallel helical gear 1.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e25 grade 7 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PHG1.0-18R PHG1.0-18RH 18 PHG1.0-19R PHG1.0-19RH 19 PHG1.0-20R PHG1.0-20RH 20 PHG1.0-21R PHG1.0-21RH 21 PHG1.0-22R PHG1.0-22RH 22 PHG1.0-23R PHG1.0-23RH 23 PHG1.0-24R PHG1.0-24RH 24 PHG1.0-25R PHG1.0-25RH 25 PHG1.0-26R PHG1.0-26RH 26 PHG1.0-27R PHG1.0-27RH 27 PHG1.0-28R PHG1.0-28RH 28 PHG1.0-29R PHG1.0-29RH 29 PHG1.0-30R PHG1.0-30RH 30 PHG1.0-32R PHG1.0-32RH 32 PHG1.0-35R PHG1.0-35RH 35 Dimensions in mm ØP Pitch 18,63 19,67 20,71 21,74 22,78 23,81 24,85 25,88 26,92 27,95 28,99 30,02 31,06 33,13 36,23 462 4 Volume  4 2013 ØD ØA ØM External Bore Boss 20,63 5 13 21,67 5 13 22,71 5 13 23,74 5 13 24,78 5 13 25,81 5 13 26,85 6 20 27,88 6 20 28,92 6 20 29,95 6 20 30,99 6 20 32,02 6 20 33,06 6 20 35,13 6 20 38,23 6 20 HPC Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,132 - 0,054 1,68 6,14 0,030 51,49 F 48,45 F 0,132 - 0,054 1,77 6,48 0,033 29,94 F 49,44 F 0,132 - 0,054 2,37 8,69 0,035 30,81 F 50,86 F 0,132 - 0,054 2,49 9,12 0,038 31,04 F 51,25 F 0,132 - 0,054 2,61 9,56 0,041 31,43 F 51,86 F 0,132 - 0,054 2,72 9,99 0,044 31,57 F 52,14 F 0,132 - 0,054 2,84 10,43 0,062 31,75 F 52,43 F 0,132 - 0,054 2,96 10,86 0,066 33,04 F 54,52 F 0,132 - 0,054 3,88 14,21 0,069 34,43 F 56,82 F 0,132 - 0,054 4,02 14,76 0,072 34,97 F 57,76 F 0,132 - 0,054 4,17 15,30 0,076 35,79 F 59,03 F 0,134 - 0,053 4,32 15,85 0,080 36,67 F 60,51 F 0,134 - 0,053 5,10 16,39 0,084 37,36 F 61,67 F 0,134 - 0,053 5,44 17,48 0,092 38,25 F 63,13 F 0,134 - 0,053 5,95 19,12 0,105 39,56 F 65,24 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA 10 Part number Z ØP Standard Hardened Teeth Pitch PHG1.0-38R PHG1.0-38RH 38 39,34 PHG1.0-40R PHG1.0-40RH 40 41,41 PHG1.0-42R PHG1.0-42RH 42 43,48 PHG1.0-45R PHG1.0-45RH 45 46,59 PHG1.0-48R PHG1.0-48RH 48 49,69 PHG1.0-50R PHG1.0-50RH 50 51,76 PHG1.0-52R PHG1.0-52RH 52 53,83 PHG1.0-55R PHG1.0-55RH 55 56,94 PHG1.0-58R PHG1.0-58RH 58 60,05 PHG1.0-60R PHG1.0-60RH 60 62,12 PHG1.0-62R PHG1.0-62RH 62 64,19 PHG1.0-65R PHG1.0-65RH 65 67,29 PHG1.0-68R PHG1.0-68RH 68 70,40 PHG1.0-70R PHG1.0-70RH 70 72,47 PHG1.0-72R PHG1.0-72RH 72 74,54 PHG1.0-75R PHG1.0-75RH 75 77,65 PHG1.0-78R PHG1.0-78RH 78 80,75 PHG1.0-80R PHG1.0-80RH 80 82,82 PHG1.0-82R PHG1.0-82RH 82 84,89 PHG1.0-85R PHG1.0-85RH 85 88,00 PHG1.0-90R PHG1.0-90RH 90 93,17 PHG1.0-95R PHG1.0-95RH 95 98,35 PHG1.0-100R PHG1.0-100RH 100 103,53 PHG1.0-110R PHG1.0-110RH 110 113,88 PHG1.0-120R PHG1.0-120RH 120 124,23 PHG1.0-125R PHG1.0-125RH 125 129,41 Dimensions in mm ØM DISCOUNTS 12 ØD ØA ØM External Bore Boss 41,34 8 35 43,41 8 35 45,48 8 35 48,59 8 35 51,69 8 35 53,76 10 40 55,83 10 40 58,94 10 40 62,05 10 40 64,12 10 40 66,19 10 40 69,29 10 50 72,40 10 50 74,47 10 50 76,54 10 50 79,65 10 50 82,75 10 50 84,82 10 50 86,89 12 60 90,00 12 60 95,17 12 60 100,35 12 60 105,53 12 60 115,88 14 70 126,23 14 70 131,41 14 70 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,134 - 0,053 6,46 20,76 0,176 41,27 F 68,12 F 0,134 - 0,053 8,70 24,31 0,187 42,77 F 70,56 F 0,134 - 0,053 9,13 25,52 0,197 42,77 F 70,99 F 0,134 - 0,053 9,78 27,35 0,215 43,57 F 71,95 F 0,134 - 0,053 10,44 29,17 0,233 44,11 F 72,76 F 0,177 - 0,072 13,60 32,97 0,269 48,57 F 80,10 F 0,177 - 0,072 14,15 34,29 0,282 50,03 F 82,56 F 0,177 - 0,072 14,96 36,27 0,303 52,11 F 86,01 F 0,177 - 0,072 15,78 38,25 0,326 53,72 F 88,60 F 0,177 - 0,072 18,59 41,20 0,341 55,10 F 90,96 F 0,177 - 0,072 19,21 42,57 0,357 56,71 F 93,62 F 0,177 - 0,072 20,14 44,63 0,449 60,89 F 100,50 F 0,177 - 0,072 21,07 46,69 0,475 63,84 F 105,35 F 0,177 - 0,072 21,69 48,07 0,493 65,12 F 107,47 F 0,177 - 0,072 22,31 49,44 0,512 66,52 F 109,79 F 0,177 - 0,072 23,24 51,50 0,541 69,90 F 115,35 F 0,179 - 0,070 24,17 53,56 0,571 72,33 F 119,34 F 0,179 - 0,070 32,03 57,60 0,592 73,67 F 121,59 F 0,179 - 0,070 32,83 59,04 0,689 76,06 F 125,53 F 0,179 - 0,070 34,03 61,20 0,722 78,27 F 129,15 F 0,179 - 0,070 36,03 64,80 0,780 80,46 F 132,81 F 0,179 - 0,070 38,03 68,40 0,840 87,19 F 143,93 F 0,179 - 0,070 47,15 73,67 0,905 88,33 F 145,72 F 0,179 - 0,070 51,86 81,03 1,132 101,60 F 167,66 F 0,181 - 0,068 56,57 88,40 1,284 125,13 F 206,49 F 0,235 - 0,101 58,93 92,08 1,365 134,46 F 221,91 F HPC Volume 4 2013 4 463 prEcision Range (Quality Grade 7e25) MODULE Parallel helical gear 1.5 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% de 7e25 gra Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PHG1.5-15R PHG1.5-15RH 15 PHG1.5-16R PHG1.5-16RH 16 PHG1.5-17R PHG1.5-17RH 17 PHG1.5-18R PHG1.5-18RH 18 PHG1.5-19R PHG1.5-19RH 19 PHG1.5-20R PHG1.5-20RH 20 PHG1.5-21R PHG1.5-21RH 21 PHG1.5-22R PHG1.5-22RH 22 PHG1.5-23R PHG1.5-23RH 23 PHG1.5-24R PHG1.5-24RH 24 PHG1.5-25R PHG1.5-25RH 25 PHG1.5-26R PHG1.5-26RH 26 PHG1.5-27R PHG1.5-27RH 27 PHG1.5-28R PHG1.5-28RH 28 Dimensions in mm ØP Pitch 23,29 24,85 26,40 27,95 29,51 31,06 32,61 34,16 35,72 37,27 38,82 40,38 41,93 43,48 464 4 Volume  4 2013 ØD ØA ØM External Bore Boss 26,29 6 19 27,85 6 19 29,40 6 19 30,95 6 19 32,51 6 19 34,06 6 19 35,61 6 19 37,16 8 28 38,72 8 28 40,27 8 28 41,82 8 28 43,38 8 28 44,93 8 28 46,48 8 28 HPC Backlash (mm) 0,132 - 0,054 0,132 - 0,054 0,132 - 0,054 0,132 - 0,054 0,132 - 0,054 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 0,134 - 0,053 Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 4,35 15,93 0,076 35,46 F 58,47 F 4,63 16,99 0,083 36,29 F 59,87 F 4,92 18,06 0,090 37,36 F 61,67 F 5,21 19,12 0,098 38,50 F 63,52 F 5,50 20,18 0,106 39,97 F 65,99 F 7,37 27,04 0,115 41,91 F 69,16 F 7,74 28,39 0,124 42,49 F 70,17 F 8,11 29,74 0,167 42,86 F 70,71 F 8,48 31,09 0,177 43,52 F 71,84 F 8,85 32,44 0,188 44,11 F 72,76 F 9,22 33,80 0,198 46,28 F 76,38 F 12,06 44,23 0,210 48,50 F 80,04 F 12,53 45,93 0,221 50,22 F 82,86 F 12,99 47,63 0,234 51,61 F 85,18 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.5 ØD ØP ØA 15 ØM 15 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PHG1.5-29R PHG1.5-29RH 29 45,03 PHG1.5-30R PHG1.5-30RH 30 46,59 PHG1.5-32R PHG1.5-32RH 32 49,69 PHG1.5-35R PHG1.5-35RH 35 54,35 PHG1.5-38R PHG1.5-38RH 38 59,01 PHG1.5-40R PHG1.5-40RH 40 62,12 PHG1.5-42R PHG1.5-42RH 42 65,22 PHG1.5-45R PHG1.5-45RH 45 69,88 PHG1.5-48R PHG1.5-48RH 48 74,54 PHG1.5-50R PHG1.5-50RH 50 77,65 PHG1.5-52R PHG1.5-52RH 52 80,75 PHG1.5-55R PHG1.5-55RH 55 85,41 PHG1.5-58R PHG1.5-58RH 58 90,07 PHG1.5-60R PHG1.5-60RH 60 93,17 PHG1.5-62R PHG1.5-62RH 62 96,28 PHG1.5-65R PHG1.5-65RH 65 100,94 PHG1.5-68R PHG1.5-68RH 68 105,60 PHG1.5-70R PHG1.5-70RH 70 108,70 PHG1.5-72R PHG1.5-72RH 72 111,81 PHG1.5-75R PHG1.5-75RH 75 116,47 PHG1.5-78R PHG1.5-78RH 78 121,13 Dimensions in mm ØD ØA External Bore 48,03 10 49,59 10 52,69 10 57,35 10 62,01 12 65,12 12 68,22 12 72,88 12 77,54 12 80,65 14 83,75 14 88,41 14 93,07 14 96,17 14 99,28 14 103,94 16 108,60 16 111,70 16 114,81 16 119,47 16 124,13 16 ØM Backlash Boss (mm) 40 0,134 - 0,053 40 0,134 - 0,053 40 0,134 - 0,053 40 0,177 - 0,072 50 0,177 - 0,072 50 0,177 - 0,072 50 0,177 - 0,072 50 0,177 - 0,072 50 0,177 - 0,072 65 0,177 - 0,072 65 0,179 - 0,070 65 0,179 - 0,070 65 0,179 - 0,070 65 0,179 - 0,070 65 0,179 - 0,070 85 0,179 - 0,070 85 0,179 - 0,070 85 0,179 - 0,070 85 0,179 - 0,070 85 0,179 - 0,070 85 0,186 - 0,070 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 13,45 49,33 0,315 52,31 F 86,34 F 15,86 55,32 0,328 53,88 F 88,94 F 16,92 59,01 0,355 55,76 F 92,05 F 18,51 64,54 0,400 57,46 F 94,78 F 20,09 70,07 0,524 62,95 F 103,87 F 27,06 82,04 0,558 65,73 F 108,50 F 28,42 86,15 0,595 65,80 F 108,58 F 30,45 92,30 0,652 67,23 F 110,96 F 32,48 98,45 0,714 71,75 F 118,43 F 42,34 111,29 0,908 80,46 F 132,79 F 44,03 115,74 0,953 84,24 F 139,01 F 46,57 122,42 1,024 86,56 F 142,78 F 49,11 129,09 1,100 88,33 F 145,72 F 57,86 139,05 1,152 89,23 F 147,22 F 59,78 143,68 1,206 90,94 F 150,04 F 62,68 150,64 1,557 94,31 F 155,68 F 65,57 157,59 1,646 100,14 F 165,26 F 67,50 162,22 1,707 103,65 F 171,05 F 69,43 166,86 1,770 109,56 F 180,80 F 72,32 173,81 1,868 116,73 F 192,64 F 75,21 180,76 1,970 123,05 F 203,07 F Volume 4 2013 4 465 prEcision Range (Quality Grade 7e25) MODULE Parallel helical gear 2.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% .Options. - - - - 5 ade 7e2 gr Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PHG2.0-15R PHG2.0-15RH 15 PHG2.0-16R PHG2.0-16RH 16 PHG2.0-17R PHG2.0-17RH 17 PHG2.0-18R PHG2.0-18RH 18 PHG2.0-19R PHG2.0-19RH 19 PHG2.0-20R PHG2.0-20RH 20 PHG2.0-21R PHG2.0-21RH 21 PHG2.0-22R PHG2.0-22RH 22 PHG2.0-23R PHG2.0-23RH 23 PHG2.0-24R PHG2.0-24RH 24 PHG2.0-25R PHG2.0-25RH 25 PHG2.0-26R PHG2.0-26RH 26 PHG2.0-27R PHG2.0-27RH 27 Dimensions in mm ØP Pitch 31,06 33,13 35,20 37,27 39,34 41,41 43,48 45,55 47,62 49,69 51,76 53,83 55,90 466 4 Volume  4 2013 ØD ØA External Bore 35,06 10 37,13 10 39,20 10 41,27 10 43,34 10 45,41 10 47,48 12 49,55 12 51,62 12 53,69 12 55,76 12 57,83 12 59,90 12 HPC ØM Boss 25 25 25 25 25 25 35 35 35 35 35 35 35 Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,134 - 0,053 9,72 35,65 0,170 52,49 F 86,63 F 0,134 - 0,053 10,37 38,03 0,186 55,10 F 90,96 F 0,134 - 0,053 11,02 40,41 0,203 56,26 F 92,84 F 0,134 - 0,053 11,67 42,79 0,222 57,69 F 95,20 F 0,134 - 0,053 12,32 45,16 0,241 59,14 F 97,61 F 0,134 - 0,053 16,50 60,51 0,261 60,37 F 99,64 F 0,134 - 0,053 17,33 63,53 0,346 62,00 F 102,32 F 0,134 - 0,053 18,15 66,56 0,368 63,13 F 104,13 F 0,134 - 0,053 18,98 69,58 0,392 64,36 F 106,26 F 0,134 - 0,053 19,80 72,61 0,416 65,77 F 108,52 F 0,177 - 0,072 20,63 75,63 0,442 69,56 F 114,83 F 0,177 - 0,072 26,99 98,97 0,469 71,60 F 118,20 F 0,177 - 0,072 28,03 102,78 0,497 74,09 F 122,25 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 2.0 ØD ØP ØA 20 ØM 20 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PHG2.0-28R PHG2.0-28RH 28 57,98 PHG2.0-29R PHG2.0-29RH 29 60,05 PHG2.0-30R PHG2.0-30RH 30 62,12 PHG2.0-32R PHG2.0-32RH 32 66,26 PHG2.0-35R PHG2.0-35RH 35 72,47 PHG2.0-38R PHG2.0-38RH 38 78,68 PHG2.0-40R PHG2.0-40RH 40 82,82 PHG2.0-42R PHG2.0-42RH 42 86,96 PHG2.0-45R PHG2.0-45RH 45 93,17 PHG2.0-48R PHG2.0-48RH 48 99,39 PHG2.0-50R PHG2.0-50RH 50 103,53 PHG2.0-52R PHG2.0-52RH 52 107,67 PHG2.0-55R PHG2.0-55RH 55 113,88 PHG2.0-58R PHG2.0-58RH 58 120,09 PHG2.0-60R PHG2.0-60RH 60 124,23 PHG2.0-62R PHG2.0-62RH 62 128,37 Dimensions in mm ØD ØA External Bore 61,98 14 64,05 14 66,12 14 70,26 14 76,47 14 82,68 16 86,82 16 90,96 16 97,17 16 103,39 16 107,53 16 111,67 16 117,88 16 124,09 20 128,23 20 132,37 20 ØM Boss 45 45 45 45 45 50 50 50 50 60 60 60 60 70 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com Backlash (mm) 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,181 - 0,068 0,181 - 0,068 0,235 - 0,101 HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 29,07 106,58 0,611 75,75 F 125,03 F 30,11 110,39 0,641 77,61 F 128,02 F 35,50 130,15 0,672 79,26 F 130,84 F 37,86 138,83 0,737 86,16 F 142,17 F 41,41 151,84 0,843 95,20 F 157,08 F 44,96 164,86 1,001 104,46 F 172,35 F 60,57 194,48 1,083 108,80 F 179,53 F 63,59 204,20 1,169 112,12 F 184,99 F 68,14 218,79 1,307 117,05 F 193,14 F 72,68 233,37 1,589 126,08 F 208,04 F 94,75 263,79 1,692 134,94 F 222,68 F 98,54 274,34 1,799 140,01 F 231,06 F 104,22 290,17 1,968 158,08 F 260,81 F 109,91 306,00 2,272 167,70 F 276,67 F 129,47 329,60 2,396 171,94 F 283,70 F 133,79 340,59 2,524 176,07 F 290,52 F Volume 4 2013 4 467 prEcision Range (Quality Grade 7e25) MODULE Parallel helical gear 2.5 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% 5 ade 7e2 gr Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PHG2.5-15R PHG2.5-15RH 15 PHG2.5-16R PHG2.5-16RH 16 PHG2.5-17R PHG2.5-17RH 17 PHG2.5-18R PHG2.5-18RH 18 PHG2.5-19R PHG2.5-19RH 19 PHG2.5-20R PHG2.5-20RH 20 Dimensions in mm ØP ØD ØA ØM Pitch External Bore Boss 38,82 43,82 12 30 41,41 46,41 12 30 44,00 49,00 12 30 46,59 51,59 12 30 49,18 54,18 12 30 51,76 56,76 12 30 468 4 Volume  4 2013 HPC Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,134 - 0,053 18,16 66,60 0,324 69,60 F 114,85 F 0,134 - 0,053 19,37 71,04 0,356 69,60 F 121,66 F 0,134 - 0,053 20,59 75,48 0,389 75,22 F 124,10 F 0,134 - 0,053 21,80 79,92 0,425 77,91 F 128,54 F 0,134 - 0,053 23,01 84,36 0,463 80,02 F 132,02 F 0,177 - 0,072 30,82 113,02 0,502 82,86 F 136,74 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 2.5 ØD ØP ØA 25 ØM 25 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PHG2.5-21R PHG2.5-21RH 21 54,35 PHG2.5-22R PHG2.5-22RH 22 56,94 PHG2.5-23R PHG2.5-23RH 23 59,53 PHG2.5-24R PHG2.5-24RH 24 62,12 PHG2.5-25R PHG2.5-25RH 25 64,70 PHG2.5-26R PHG2.5-26RH 26 67,29 PHG2.5-27R PHG2.5-27RH 27 69,88 PHG2.5-28R PHG2.5-28RH 28 72,47 PHG2.5-29R PHG2.5-29RH 29 75,06 PHG2.5-30R PHG2.5-30RH 30 77,65 PHG2.5-32R PHG2.5-32RH 32 82,82 PHG2.5-35R PHG2.5-35RH 35 90,59 PHG2.5-38R PHG2.5-38RH 38 98,35 PHG2.5-40R PHG2.5-40RH 40 103,53 PHG2.5-42R PHG2.5-42RH 42 108,70 PHG2.5-45R PHG2.5-45RH 45 116,47 PHG2.5-48R PHG2.5-48RH 48 124,23 PHG2.5-50R PHG2.5-50RH 50 129,41 Dimensions in mm ØD ØA External Bore 59,35 14 61,94 14 64,53 14 67,12 14 69,70 14 72,29 14 74,88 14 77,47 16 80,06 16 82,65 16 87,82 16 95,59 16 103,35 16 108,53 16 113,70 16 121,47 20 129,23 20 134,41 20 ØM Boss 45 45 45 45 45 45 45 55 55 55 55 55 65 65 65 75 75 75 +33(0)4 37 490 055 - cial2@hpceurope.com Backlash (mm) 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,181 - 0,068 0,235 - 0,101 HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 32,36 118,67 0,702 84,90 F 140,10 F 33,90 124,32 0,745 87,94 F 145,14 F 35,45 129,97 0,791 90,15 F 148,77 F 36,99 135,62 0,839 92,78 F 153,09 F 38,53 141,27 0,889 98,09 F 161,41 F 50,42 184,86 0,942 102,74 F 169,53 F 52,36 191,97 0,996 104,85 F 173,04 F 54,30 199,08 1,188 107,76 F 177,81 F 56,23 206,19 1,246 111,22 F 183,51 F 66,30 243,11 1,307 115,01 F 189,79 F 70,72 259,32 1,434 121,89 F 201,12 F 77,35 283,63 1,640 127,03 F 209,62 F 83,98 307,94 2,050 139,49 F 230,22 F 113,13 379,84 2,210 145,00 F 239,31 F 118,79 398,83 2,380 149,52 F 246,69 F 127,27 427,31 2,817 154,76 F 255,38 F 135,75 455,80 3,104 165,82 F 273,56 F 176,98 515,22 3,305 173,37 F 286,08 F Volume 4 2013 4 469 prEcision Range (Quality Grade 7e25) MODULE Parallel helical gear 3.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 - 15° Right angled helical (R in Part number) - 15° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 3967 - Efficiency approx 98% 25 rade 7e g Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A 15° right angled helical gear must be used with a corresponding 15° left angled gear. Incompatible with SH range. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PHG3.0-15R PHG3.0-15RH 15 46,59 PHG3.0-16R PHG3.0-16RH 16 49,69 PHG3.0-17R PHG3.0-17RH 17 52,80 PHG3.0-18R PHG3.0-18RH 18 55,90 PHG3.0-19R PHG3.0-19RH 19 59,01 PHG3.0-20R PHG3.0-20RH 20 62,12 PHG3.0-21R PHG3.0-21RH 21 65,22 ØD ØA External Bore 52,59 14 55,69 14 58,80 14 61,90 14 65,01 14 68,12 14 71,22 14 470 4 Volume  4 2013 HPC Dimensions in mm ØM Boss 38 38 38 38 38 38 38 Backlash (mm) 0,134 - 0,053 0,134 - 0,053 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 30,26 110,96 0,592 96,83 F 159,79 F 32,28 118,36 0,646 100,48 F 165,76 F 34,30 125,76 0,704 103,63 F 170,99 F 36,31 133,15 0,766 107,15 F 176,81 F 38,33 140,55 0,831 110,89 F 182,96 F 51,35 188,30 0,900 114,29 F 188,59 F 53,92 197,71 0,972 117,61 F 194,10 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 3.0 ØD ØP ØA 30 ØM 30 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z Standard Hardened Teeth PHG3.0-22R PHG3.0-22RH 22 PHG3.0-23R PHG3.0-23RH 23 PHG3.0-24R PHG3.0-24RH 24 PHG3.0-25R PHG3.0-25RH 25 PHG3.0-26R PHG3.0-26RH 26 PHG3.0-27R PHG3.0-27RH 27 PHG3.0-28R PHG3.0-28RH 28 PHG3.0-29R PHG3.0-29RH 29 PHG3.0-30R PHG3.0-30RH 30 PHG3.0-32R PHG3.0-32RH 32 PHG3.0-35R PHG3.0-35RH 35 PHG3.0-38R PHG3.0-38RH 38 PHG3.0-40R PHG3.0-40RH 40 Dimensions in mm ØP Pitch 68,33 71,43 74,54 77,65 80,75 83,86 86,96 90,07 93,17 99,39 108,70 118,02 124,23 ØD ØA External Bore 74,33 16 77,43 16 80,54 16 83,65 16 86,75 16 89,86 16 92,96 16 96,07 20 99,17 20 105,39 20 114,70 20 124,02 20 130,23 20 ØM Boss 55 55 55 55 55 55 55 70 70 70 70 70 70 +33(0)4 37 490 055 - cial2@hpceurope.com Backlash (mm) 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,177 - 0,072 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,179 - 0,070 0,181 - 0,069 HPC Torque (Nm) Weight Price each 1 to 5 Standard Hardened (kg) Standard Hardened 56,49 207,13 1,318 124,64 F 205,68 F 59,06 216,54 1,397 131,51 F 217,05 F 61,62 225,96 1,480 134,84 F 222,48 F 64,19 235,37 1,567 138,83 F 229,06 F 84,00 308,00 1,657 143,01 F 235,95 F 87,23 319,85 1,751 148,14 F 244,48 F 90,46 331,70 1,848 159,00 F 262,33 F 93,69 343,54 2,240 184,16 F 303,87 F 110,47 405,05 2,350 197,74 F 326,26 F 117,83 432,05 2,570 203,17 F 335,25 F 128,88 472,56 2,920 209,29 F 345,35 F 139,93 513,06 3,310 297,61 F 491,07 F 188,49 656,36 3,590 305,78 F 504,57 F Volume 4 2013 4 471 prEcision Range (Quality Grade 7e) MODULE Crossed helical gear 0.5 Pre-treated or case hardened steel - Quality grade 7e DIN 58405 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin e grade 7 .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear . Part number Z ØP Standard Hardened Teeth Pitch PXHG0.5-40R PXHG0.5-40RH 40 28,28 PXHG0.5-42R PXHG0.5-42RH 42 29,70 PXHG0.5-45R PXHG0.5-45RH 45 31,82 PXHG0.5-48R PXHG0.5-48RH 48 33,94 PXHG0.5-50R PXHG0.5-50RH 50 35,36 PXHG0.5-52R PXHG0.5-52RH 52 36,77 PXHG0.5-55R PXHG0.5-55RH 55 38,89 PXHG0.5-58R PXHG0.5-58RH 58 41,01 PXHG0.5-60R PXHG0.5-60RH 60 42,43 PXHG0.5-62R PXHG0.5-62RH 62 43,84 PXHG0.5-65R PXHG0.5-65RH 65 45,96 PXHG0.5-68R PXHG0.5-68RH 68 48,08 PXHG0.5-70R PXHG0.5-70RH 70 49,50 PXHG0.5-72R PXHG0.5-72RH 72 50,91 PXHG0.5-75R PXHG0.5-75RH 75 53,03 Dimensions in mm 472 4 Volume  4 2013 ØD ØA ØM External Bore Boss 29,28 8 22 30,70 8 22 32,82 8 22 34,94 8 30 36,36 8 30 37,77 8 30 39,89 8 30 42,01 8 35 43,43 8 35 44,84 8 35 46,96 8 35 49,08 8 35 50,50 8 35 51,91 8 35 54,03 8 35 HPC DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,143 - 0,058 0,19 0,68 0,048 39,45 F 65,12 F 0,143 - 0,058 0,20 0,72 0,051 40,45 F 66,74 F 0,146 - 0,055 0,21 0,77 0,055 41,36 F 68,23 F 0,146 - 0,055 0,22 0,82 0,084 41,95 F 69,21 F 0,146 - 0,055 0,23 0,85 0,087 42,79 F 70,62 F 0,146 - 0,055 0,24 0,89 0,090 43,10 F 71,11 F 0,146 - 0,055 0,26 0,94 0,095 43,96 F 72,56 F 0,146 - 0,055 0,27 0,99 0,120 44,39 F 73,22 F 0,146 - 0,055 0,28 1,02 0,124 44,96 F 74,14 F 0,146 - 0,055 0,29 1,06 0,128 45,29 F 74,72 F 0,146 - 0,055 0,30 1,11 0,134 46,26 F 76,33 F 0,146 - 0,055 0,32 1,16 0,140 46,39 F 76,60 F 0,146 - 0,055 0,33 1,19 0,144 46,43 F 76,64 F 0,165 - 0,061 0,33 1,23 0,148 56,07 F 92,54 F 0,165 - 0,061 0,35 1,28 0,155 56,14 F 92,60 F www.hpceurope.com - +33(0)4 37 496 496 MODULE 0.5 ØD ØP ØA 5 ØM 10 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PXHG0.5-78R PXHG0.5-78RH 78 55,15 PXHG0.5-80R PXHG0.5-80RH 80 56,57 PXHG0.5-82R PXHG0.5-82RH 82 57,98 PXHG0.5-85R PXHG0.5-85RH 85 60,10 PXHG0.5-90R PXHG0.5-90RH 90 63,64 PXHG0.5-95R PXHG0.5-95RH 95 67,18 PXHG0.5-100R PXHG0.5-100RH 100 70,71 PXHG0.5-105R PXHG0.5-105RH 105 74,25 PXHG0.5-110R PXHG0.5-110RH 110 77,78 PXHG0.5-115R PXHG0.5-115RH 115 81,32 PXHG0.5-120R PXHG0.5-120RH 120 84,85 PXHG0.5-130R PXHG0.5-130RH 130 91,92 PXHG0.5-140R PXHG0.5-140RH 140 98,99 PXHG0.5-150R PXHG0.5-150RH 150 106,07 PXHG0.5-160R PXHG0.5-160RH 160 113,14 PXHG0.5-170R PXHG0.5-170RH 170 120,21 PXHG0.5-180R PXHG0.5-180RH 180 127,28 Dimensions in mm ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 56,15 10 45 0,165 - 0,061 0,36 1,33 0,208 56,48 F 93,21 F 57,57 10 45 0,165 - 0,061 0,37 1,36 0,212 56,21 F 92,78 F 58,98 10 45 0,165 - 0,061 0,38 1,40 0,217 57,87 F 95,50 F 61,10 10 45 0,165 - 0,061 0,40 1,45 0,225 62,14 F 102,58 F 64,64 10 45 0,165 - 0,061 0,42 1,53 0,238 67,16 F 110,80 F 68,18 10 45 0,165 - 0,061 0,44 1,62 0,253 70,12 F 115,71 F 71,71 12 50 0,165 - 0,061 0,40 1,47 0,293 74,28 F 122,55 F 75,25 12 50 0,165 - 0,061 0,42 1,55 0,308 78,27 F 129,15 F 78,78 12 50 0,165 - 0,061 0,44 1,62 0,325 79,98 F 131,97 F 82,32 12 50 0,169 - 0,056 0,46 1,70 0,342 82,20 F 135,67 F 85,85 12 50 0,169 - 0,056 0,48 1,77 0,360 82,69 F 136,44 F 92,92 12 60 0,169 - 0,056 0,52 1,92 0,465 86,75 F 143,14 F 99,99 12 60 0,169 - 0,056 0,56 2,06 0,507 90,24 F 148,90 F 107,07 12 60 0,199 - 0,081 0,58 2,14 0,551 98,43 F 162,40 F 114,14 14 65 0,199 - 0,081 0,62 2,29 0,632 103,53 F 170,80 F 121,21 14 65 0,204 - 0,076 0,66 2,43 0,683 108,29 F 178,73 F 128,28 14 65 0,204 - 0,076 0,70 2,57 0,736 110,40 F 182,16 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 473 prEcision Range (Quality Grade 7e25) MODULE Crossed helical gear 1.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% .Options. - - - - 25 rade 7e g Quality Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PXHG1.0-20R PXHG1.0-20RH 20 28,28 PXHG1.0-21R PXHG1.0-21RH 21 29,70 PXHG1.0-22R PXHG1.0-22RH 22 31,11 PXHG1.0-23R PXHG1.0-23RH 23 32,53 PXHG1.0-24R PXHG1.0-24RH 24 33,94 PXHG1.0-25R PXHG1.0-25RH 25 35,36 PXHG1.0-26R PXHG1.0-26RH 26 36,77 PXHG1.0-27R PXHG1.0-27RH 27 38,18 PXHG1.0-28R PXHG1.0-28RH 28 39,60 PXHG1.0-29R PXHG1.0-29RH 29 41,01 PXHG1.0-30R PXHG1.0-30RH 30 42,43 PXHG1.0-32R PXHG1.0-32RH 32 45,25 PXHG1.0-35R PXHG1.0-35RH 35 49,50 ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 30,28 5 18 0,187 - 0,068 0,37 1,36 0,069 34,95 F 57,69 F 31,70 5 18 0,187 - 0,068 0,39 1,43 0,074 35,53 F 58,68 F 33,11 5 18 0,190 - 0,065 0,41 1,50 0,080 36,45 F 60,14 F 34,53 5 18 0,190 - 0,065 0,43 1,57 0,085 36,87 F 60,81 F 35,94 6 30 0,190 - 0,065 0,45 1,64 0,132 37,31 F 61,58 F 37,36 6 30 0,190 - 0,065 0,47 1,71 0,138 38,12 F 62,89 F 38,77 6 30 0,190 - 0,065 0,48 1,77 0,144 38,52 F 63,61 F 40,18 6 30 0,190 - 0,065 0,50 1,84 0,151 39,97 F 65,99 F 41,60 6 30 0,190 - 0,065 0,52 1,91 0,157 40,66 F 67,16 F 43,01 6 30 0,190 - 0,065 0,54 1,98 0,164 40,96 F 67,66 F 44,43 6 30 0,190 - 0,065 0,56 2,05 0,172 41,18 F 67,99 F 47,25 6 30 0,190 - 0,065 0,60 2,18 0,187 41,69 F 68,77 F 51,50 6 30 0,190 - 0,065 0,65 2,39 0,212 46,26 F 76,33 F 474 4 Volume  4 2013 HPC Dimensions in mm www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.0 ØD ØP ØA 10 ØM 12 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PXHG1.0-38R PXHG1.0-38RH 38 53,74 PXHG1.0-40R PXHG1.0-40RH 40 56,57 PXHG1.0-42R PXHG1.0-42RH 42 59,40 PXHG1.0-45R PXHG1.0-45RH 45 63,64 PXHG1.0-48R PXHG1.0-48RH 48 67,88 PXHG1.0-50R PXHG1.0-50RH 50 70,71 PXHG1.0-52R PXHG1.0-52RH 52 73,54 PXHG1.0-55R PXHG1.0-55RH 55 77,78 PXHG1.0-58R PXHG1.0-58RH 58 82,02 PXHG1.0-60R PXHG1.0-60RH 60 84,85 PXHG1.0-62R PXHG1.0-62RH 62 87,68 PXHG1.0-65R PXHG1.0-65RH 65 91,92 PXHG1.0-68R PXHG1.0-68RH 68 96,17 PXHG1.0-70R PXHG1.0-70RH 70 98,99 PXHG1.0-72R PXHG1.0-72RH 72 101,82 PXHG1.0-75R PXHG1.0-75RH 75 106,07 PXHG1.0-78R PXHG1.0-78RH 78 110,31 PXHG1.0-80R PXHG1.0-80RH 80 113,14 PXHG1.0-82R PXHG1.0-82RH 82 115,97 PXHG1.0-85R PXHG1.0-85RH 85 120,21 Dimensions in mm ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 55,74 10 45 0,250 - 0,089 0,71 2,59 0,313 48,81 F 80,51 F 58,57 10 45 0,250 - 0,089 0,74 2,73 0,332 50,50 F 83,37 F 61,40 10 45 0,250 - 0,089 0,78 2,87 0,352 52,31 F 86,34 F 65,64 10 45 0,250 - 0,089 0,84 3,07 0,384 56,57 F 93,33 F 69,88 10 45 0,250 - 0,089 0,89 3,27 0,419 60,89 F 100,50 F 72,71 10 45 0,250 - 0,089 0,80 2,95 0,443 63,47 F 104,79 F 75,54 10 50 0,250 - 0,089 0,84 3,07 0,503 66,85 F 110,30 F 79,78 10 50 0,250 - 0,089 0,88 3,24 0,542 68,77 F 113,50 F 84,02 10 50 0,254 - 0,085 0,93 3,42 0,584 71,11 F 117,40 F 86,85 10 50 0,254 - 0,085 0,97 3,54 0,613 72,64 F 119,87 F 89,68 10 50 0,254 - 0,085 1,00 3,66 0,643 72,66 F 119,93 F 93,92 10 55 0,254 - 0,085 1,05 3,83 0,729 82,98 F 136,94 F 98,17 10 55 0,254 - 0,085 1,09 4,01 0,778 84,11 F 138,83 F 100,99 10 55 0,254 - 0,085 1,13 4,13 0,812 84,13 F 138,88 F 103,82 10 55 0,254 - 0,085 1,16 4,25 0,847 105,18 F 173,58 F 108,07 10 55 0,254 - 0,085 1,17 4,29 0,901 108,45 F 178,95 F 112,31 12 65 0,254 - 0,085 1,22 4,46 1,040 112,33 F 185,38 F 115,14 12 65 0,254 - 0,085 1,25 4,57 1,079 119,09 F 196,52 F 117,97 12 65 0,254 - 0,085 1,28 4,69 1,119 124,32 F 205,17 F 122,21 12 65 0,259 - 0,081 1,32 4,86 1,181 131,34 F 216,69 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 475 prEcision Range (Quality Grade 7e25) MODULE Crossed helical gear 1.5 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% de 7e25 gra Quality .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PXHG1.5-15R PXHG1.5-15RH 15 31,82 PXHG1.5-16R PXHG1.5-16RH 16 33,94 PXHG1.5-17R PXHG1.5-17RH 17 36,06 PXHG1.5-18R PXHG1.5-18RH 18 38,18 PXHG1.5-19R PXHG1.5-19RH 19 40,31 PXHG1.5-20R PXHG1.5-20RH 20 42,43 PXHG1.5-21R PXHG1.5-21RH 21 44,55 PXHG1.5-22R PXHG1.5-22RH 22 46,67 PXHG1.5-23R PXHG1.5-23RH 23 48,79 PXHG1.5-24R PXHG1.5-24RH 24 50,91 PXHG1.5-25R PXHG1.5-25RH 25 53,03 PXHG1.5-26R PXHG1.5-26RH 26 55,15 PXHG1.5-27R PXHG1.5-27RH 27 57,28 PXHG1.5-28R PXHG1.5-28RH 28 59,40 ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 34,82 6 25 0,190 - 0,065 0,63 2,30 0,144 40,78 F 67,29 F 36,94 6 25 0,190 - 0,065 0,67 2,46 0,156 41,50 F 68,52 F 39,06 6 25 0,190 - 0,065 0,71 2,61 0,170 44,11 F 72,76 F 41,18 6 25 0,190 - 0,065 0,75 2,76 0,184 46,18 F 76,21 F 43,31 6 25 0,190 - 0,065 0,80 2,92 0,200 47,66 F 78,60 F 45,43 6 25 0,190 - 0,065 0,84 3,07 0,216 49,75 F 82,13 F 47,55 8 40 0,190 - 0,065 0,88 3,22 0,318 51,25 F 84,56 F 49,67 8 40 0,190 - 0,065 0,92 3,38 0,335 52,99 F 87,47 F 51,79 8 40 0,190 - 0,065 0,88 3,24 0,354 53,55 F 88,39 F 53,91 8 40 0,250 - 0,089 0,92 3,39 0,373 54,02 F 89,18 F 56,03 8 40 0,250 - 0,089 0,96 3,53 0,394 57,46 F 94,78 F 58,15 8 40 0,250 - 0,089 1,00 3,67 0,415 58,76 F 96,98 F 60,28 8 40 0,250 - 0,089 1,04 3,81 0,437 61,24 F 101,05 F 62,40 8 40 0,250 - 0,089 1,08 3,95 0,459 62,56 F 103,26 F 476 4 Volume  4 2013 HPC Dimensions in mm www.hpceurope.com - +33(0)4 37 496 496 MODULE 1.5 ØD ØP ØA 15 ØM 15 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Part number Z ØP Standard Hardened Teeth Pitch PXHG1.5-29R PXHG1.5-29RH 29 61,52 PXHG1.5-30R PXHG1.5-30RH 30 63,64 PXHG1.5-32R PXHG1.5-32RH 32 67,88 PXHG1.5-35R PXHG1.5-35RH 35 74,25 PXHG1.5-38R PXHG1.5-38RH 38 80,61 PXHG1.5-40R PXHG1.5-40RH 40 84,85 PXHG1.5-42R PXHG1.5-42RH 42 89,10 PXHG1.5-45R PXHG1.5-45RH 45 95,46 PXHG1.5-48R PXHG1.5-48RH 48 101,82 PXHG1.5-50R PXHG1.5-50RH 50 106,07 PXHG1.5-52R PXHG1.5-52RH 52 110,31 PXHG1.5-55R PXHG1.5-55RH 55 116,67 PXHG1.5-58R PXHG1.5-58RH 58 123,04 PXHG1.5-60R PXHG1.5-60RH 60 127,28 Dimensions in mm ØD ØA ØM External Bore Boss 64,52 10 50 66,64 10 50 70,88 10 50 77,25 10 50 83,61 12 55 87,85 12 55 92,10 12 55 98,46 12 55 104,82 12 55 109,07 14 65 113,31 14 65 119,67 14 65 126,04 14 65 130,28 14 65 +33(0)4 37 490 055 - cial2@hpceurope.com Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,250 - 0,089 1,12 4,09 0,559 62,58 F 103,32 F 0,250 - 0,089 1,15 4,23 0,584 62,61 F 103,37 F 0,250 - 0,089 1,23 4,51 0,635 66,50 F 109,79 F 0,250 - 0,089 1,27 4,65 0,718 76,36 F 126,02 F 0,254 - 0,085 1,38 5,04 0,850 81,85 F 135,10 F 0,254 - 0,085 1,45 5,31 0,914 83,75 F 138,22 F 0,254 - 0,085 1,52 5,58 0,982 84,92 F 140,17 F 0,254 - 0,085 1,63 5,97 1,090 87,68 F 144,71 F 0,254 - 0,085 1,74 6,37 1,206 95,32 F 157,33 F 0,254 - 0,085 1,75 6,43 1,389 101,43 F 167,37 F 0,254 - 0,085 1,82 6,69 1,473 110,61 F 182,46 F 0,254 - 0,085 1,93 7,07 1,606 117,28 F 193,55 F 0,259 - 0,081 2,03 7,46 1,747 130,65 F 215,55 F 0,332 - 0,126 2,10 7,72 1,845 130,73 F 215,66 F HPC Volume 4 2013 4 477 prEcision Range (Quality Grade 7e25) Module Crossed helical gear 2.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% Quality e25 grade 7 .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. Part number Z ØP Standard Hardened Teeth Pitch PXHG2.0-15R PXHG2.0-15RH 15 42,43 PXHG2.0-16R PXHG2.0-16RH 16 45,25 PXHG2.0-17R PXHG2.0-17RH 17 48,08 PXHG2.0-18R PXHG2.0-18RH 18 50,91 PXHG2.0-19R PXHG2.0-19RH 19 53,74 PXHG2.0-20R PXHG2.0-20RH 20 56,57 PXHG2.0-21R PXHG2.0-21RH 21 59,40 PXHG2.0-22R PXHG2.0-22RH 22 62,23 PXHG2.0-23R PXHG2.0-23RH 23 65,05 PXHG2.0-24R PXHG2.0-24RH 24 67,88 PXHG2.0-25R PXHG2.0-25RH 25 70,71 PXHG2.0-26R PXHG2.0-26RH 26 73,54 PXHG2.0-27R PXHG2.0-27RH 27 76,37 Dimensions in mm 478 4 Volume  4 2013 ØD ØA ØM External Bore Boss 46,43 10 35 49,25 10 35 52,08 10 35 54,91 10 35 57,74 10 35 60,57 10 35 63,40 12 45 66,23 12 45 69,05 12 45 71,88 12 45 74,71 12 45 77,54 12 45 80,37 12 45 HPC DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,190 - 0,065 1,12 4,09 0,346 58,92 F 97,25 F 0,190 - 0,065 1,19 4,37 0,376 60,14 F 99,27 F 0,190 - 0,065 1,16 4,26 0,408 64,91 F 107,13 F 0,250 - 0,089 1,23 4,51 0,442 67,00 F 110,52 F 0,250 - 0,089 1,30 4,76 0,478 69,39 F 114,46 F 0,250 - 0,089 1,37 5,01 0,517 70,86 F 116,95 F 0,250 - 0,089 1,44 5,27 0,703 74,22 F 122,53 F 0,250 - 0,089 1,50 5,52 0,745 80,65 F 133,08 F 0,250 - 0,089 1,57 5,77 0,789 82,24 F 135,72 F 0,250 - 0,089 1,64 6,02 0,835 86,16 F 142,17 F 0,250 - 0,089 1,61 5,90 0,883 94,04 F 155,14 F 0,250 - 0,089 1,67 6,14 0,933 95,22 F 157,20 F 0,250 - 0,089 1,74 6,37 0,985 100,00 F 165,04 F www.hpceurope.com - +33(0)4 37 496 496 Module 2.0 ØD ØP ØA 20 ØM 20 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Z ØP Part number Standard Hardened Teeth Pitch PXHG2.0-28R PXHG2.0-28RH 28 79,20 PXHG2.0-29R PXHG2.0-29RH 29 82,02 PXHG2.0-30R PXHG2.0-30RH 30 84,85 PXHG2.0-32R PXHG2.0-32RH 32 90,51 PXHG2.0-35R PXHG2.0-35RH 35 98,99 PXHG2.0-38R PXHG2.0-38RH 38 107,48 PXHG2.0-40R PXHG2.0-40RH 40 113,14 PXHG2.0-42R PXHG2.0-42RH 42 118,79 PXHG2.0-45R PXHG2.0-45RH 45 127,28 Dimensions in mm ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 83,20 14 55 0,250 - 0,089 1,80 6,61 1,322 101,82 F 168,04 F 86,02 14 55 0,250 - 0,085 1,87 6,84 1,378 104,98 F 173,21 F 88,85 14 55 0,250 - 0,085 1,93 7,08 1,436 106,24 F 175,29 F 94,51 14 55 0,250 - 0,085 2,06 7,55 1,557 112,12 F 185,01 F 102,99 14 55 0,254 - 0,085 2,25 8,26 1,755 126,31 F 208,38 F 111,48 20 65 0,254 - 0,085 2,37 8,69 1,836 134,74 F 222,31 F 117,14 20 65 0,254 - 0,085 2,49 9,14 1,989 154,13 F 254,23 F 122,79 20 65 0,254 - 0,085 2,62 9,60 2,150 160,85 F 265,38 F 131,28 20 65 0,332 - 0,126 2,81 10,29 2,407 176,81 F 291,75 F +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 479 prEcision Range (Quality Grade 7e25) Module Crossed helical gear 2.5 Pre-treated or case hardened steel 5 ade 7e2 gr Quality - Quality grade 7e25 DIN 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% ØD ØP ØA ØM .Options. - - - - Alternative bores (H7) Keyway conforming to DIN 6885 (JS9) Tapped hole Hole for dowel pin .Info.. - Torque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. Part number Z ØP Standard Hardened Teeth Pitch PXHG2.5-15R PXHG2.5-15RH 15 53,03 PXHG2.5-16R PXHG2.5-16RH 16 56,57 PXHG2.5-17R PXHG2.5-17RH 17 60,10 PXHG2.5-18R PXHG2.5-18RH 18 63,64 PXHG2.5-19R PXHG2.5-19RH 19 67,18 PXHG2.5-20R PXHG2.5-20RH 20 70,71 PXHG2.5-21R PXHG2.5-21RH 21 74,25 PXHG2.5-22R PXHG2.5-22RH 22 77,78 PXHG2.5-23R PXHG2.5-23RH 23 81,32 PXHG2.5-24R PXHG2.5-24RH 24 84,85 PXHG2.5-25R PXHG2.5-25RH 25 88,39 PXHG2.5-26R PXHG2.5-26RH 26 91,92 PXHG2.5-27R PXHG2.5-27RH 27 95,46 PXHG2.5-28R PXHG2.5-28RH 28 98,99 PXHG2.5-29R PXHG2.5-29RH 29 102,53 PXHG2.5-30R PXHG2.5-30RH 30 106,07 PXHG2.5-32R PXHG2.5-32RH 32 113,14 PXHG2.5-35R PXHG2.5-35RH 35 123,74 Dimensions in mm 480 4 Volume  4 2013 25 25 DISCOUNTS Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request ØD ØA ØM Backlash Torque (Nm) Weight Price each 1 to 5 External Bore Boss (mm) Standard Hardened (kg) Standard Hardened 58,03 14 45 0,250 - 0,089 1,60 5,88 0,680 81,53 F 134,56 F 61,57 14 45 0,250 - 0,089 1,71 6,27 0,739 83,59 F 137,99 F 65,10 14 45 0,250 - 0,089 1,82 6,66 0,802 90,73 F 149,71 F 68,64 14 45 0,250 - 0,089 1,92 7,05 0,869 95,32 F 157,30 F 72,18 14 45 0,250 - 0,089 2,03 7,44 0,939 97,31 F 160,60 F 75,71 20 55 0,250 - 0,089 2,01 7,37 1,105 103,13 F 170,19 F 79,25 20 55 0,250 - 0,089 2,11 7,74 1,183 106,65 F 176,02 F 82,78 20 55 0,250 - 0,089 2,21 8,11 1,265 114,46 F 195,49 F 86,32 20 55 0,254 - 0,085 2,31 8,48 1,351 114,46 F 188,82 F 89,85 20 55 0,254 - 0,085 2,41 8,85 1,441 117,17 F 193,31 F 93,39 20 55 0,254 - 0,085 2,51 9,22 1,535 126,41 F 208,51 F 96,92 20 55 0,254 - 0,085 2,61 9,59 1,633 128,07 F 211,32 F 100,46 20 55 0,254 - 0,085 2,72 9,96 1,734 133,60 F 220,43 F 103,99 20 55 0,254 - 0,085 2,82 10,32 1,839 136,90 F 225,89 F 107,53 25 65 0,254 - 0,085 2,92 10,69 2,064 145,53 F 240,14 F 111,07 25 65 0,254 - 0,085 2,92 10,72 2,177 147,42 F 243,21 F 118,14 25 65 0,254 - 0,085 3,12 11,43 2,415 157,91 F 260,53 F 128,74 25 65 0,259 - 0,081 3,41 12,50 2,800 170,32 F 281,06 F HPC www.hpceurope.com - +33(0)4 37 496 496 prEcision Range (Quality Grade 7e25) Crossed helical gear Module 3.0 Pre-treated or case hardened steel - Quality grade 7e25 DIN 3961 (AGMA Q10) - Power transferred through 90° - 45° Right angled helical (R in Part number) - 45° Left angled helical (L in Part number) - Pressure angle: 20° - Material: 35NCD6 Pre-treated steel 28HRC 20NCD2 case hardened steel 58HRC - Teeth conform to DIN 867 - Tooth thickness conforms to DIN 58405 - Efficiency approx 98% Quality e25 grade 7 .Options. - Alternative bores (H7) - Keyway conforming to DIN 6885 (JS9) - Tapped hole - Hole for dowel pin .Info.. ØD ØP - T  orque figures are for 100 rpm and are given as a guide only. - Grade and tolerances measured before heat treatment Important: A helical gear with a 45° right hand angle meshes with a second identically angled gear. Part number Z ØP Standard Hardened Teeth Pitch PXHG3.0-15R PXHG3.0-15RH 15 63,64 PXHG3.0-16R PXHG3.0-16RH 16 67,88 PXHG3.0-17R PXHG3.0-17RH 17 72,12 PXHG3.0-18R PXHG3.0-18RH 18 76,37 PXHG3.0-19R PXHG3.0-19RH 19 80,61 PXHG3.0-20R PXHG3.0-20RH 20 84,85 PXHG3.0-21R PXHG3.0-21RH 21 89,10 PXHG3.0-22R PXHG3.0-22RH 22 93,34 PXHG3.0-23R PXHG3.0-23RH 23 97,58 PXHG3.0-24R PXHG3.0-24RH 24 101,82 PXHG3.0-25R PXHG3.0-25RH 25 106,07 PXHG3.0-26R PXHG3.0-26RH 26 110,31 PXHG3.0-27R PXHG3.0-27RH 27 114,55 PXHG3.0-28R PXHG3.0-28RH 28 118,79 PXHG3.0-29R PXHG3.0-29RH 29 123,04 PXHG3.0-30R PXHG3.0-30RH 30 127,28 Dimensions in mm ØA ØM 30 DISCOUNTS 30 ØD ØA ØM External Bore Boss 69,64 16 45 73,88 16 45 78,12 16 45 82,37 16 45 86,61 16 45 90,85 16 45 95,10 20 55 99,34 20 55 103,58 20 55 107,82 20 55 112,07 20 55 116,31 20 55 120,55 20 55 124,79 20 55 129,04 25 65 133,28 25 65 +33(0)4 37 490 055 - cial2@hpceurope.com Qty. 1+ 6+ 19+ 50+ Disc. List. -5% -10% On request Backlash Torque (Nm) Weight Price each 1 to 5 (mm) Standard Hardened (kg) Standard Hardened 0,250 - 0,089 2,31 8,46 1,020 103,55 F 170,88 F 0,250 - 0,089 2,46 9,03 1,122 106,81 F 176,31 F 0,250 - 0,089 2,46 9,03 1,231 116,54 F 192,31 F 0,250 - 0,089 2,61 9,56 1,346 123,14 F 203,17 F 0,254 - 0,085 2,75 10,09 1,468 126,21 F 208,27 F 0,254 - 0,085 2,90 10,62 1,597 135,00 F 222,70 F 0,254 - 0,085 3,04 11,15 1,864 139,84 F 230,71 F 0,254 - 0,085 3,19 11,68 2,006 150,02 F 247,53 F 0,254 - 0,085 3,33 12,21 2,154 158,08 F 260,81 F 0,254 - 0,085 3,48 12,74 2,309 161,24 F 266,08 F 0,254 - 0,085 3,51 12,86 2,471 180,50 F 297,86 F 0,254 - 0,085 3,65 13,37 2,640 183,90 F 303,50 F 0,254 - 0,085 3,79 13,89 2,815 188,98 F 311,82 F 0,254 - 0,085 3,93 14,40 2,997 191,78 F 316,43 F 0,259 - 0,081 4,07 14,92 3,325 197,46 F 325,79 F 0,332 - 0,126 4,21 15,43 3,520 213,29 F 351,93 F HPC Volume 4 2013 4 481 Precision gears Controlled backlash Improved surface quality Reduced vibration Reduced noise Smoother operation 482 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Advantages Contact our Technical department on +33 437 496 496 or cial2@hpceurope.com Limited runout Teeth conform to DIN 3961 Quality grades 6 to 8 Longer life expectancy +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 483 Precision gears - Technical information Spur and helical gears Equation for Equation for Description Symbol Unit spur gears helical gears Normal module m n = m n = m n / cos b Transverse module m t - = m n / sin b Axial module m x 20° 20° Normal Pressure Angle a n degrees = tan -1 (tan a n / cos b) Transverse Pressure Angle a t degrees = a n Helix angle b degrees 15° ou 45° Lead angle l degrees - 90-b Number of teeth Z Profile shift coefficient x 0 as standard 0 as standard 1.m n 1.m n Addendum h a mm Dedendum h f mm 1.25m n 1.25m n Tooth depth h mm 2.25m n 2.25m n Gear ratio R = Z 2 / Z 1 = Z 2 / Z 1 Centre distance a mm = (d 1 +d 2 ) / 2 = (d 1 +d 2 ) / 2 = Z.m n =(Z.m n ) / cos b Pitch circle diameter d mm = Z.m n = d + (2m n .x) + (2m n ) = d + (2m n .x) + (2m n ) Tip diameter d a mm = d a - (2.h) = d a - (2.h) Root diameter d r mm = p.m n = p.m n Normal pitch p n mm Transverse pitch p t - = p.m t =(p.m n ) / cos b - = p.m x =(p.m n ) / sin b Axial pitch p x Normal tooth thickness in pitch circle s n mm = (p n /2) + 2m n .x.tan a t = (p n /2) + 2m n .x.tan a n Transversal tooth thickness in pitch circle s t mm - = (p t /2) + 2m n .x.tan a t When working with a pair of gears the subscripts 1 & 2 denote the input (drive) and the output (driven) gear. Tip diameter is the theoretical diameter of the gear without tooth thickness tolerance applied. For s n & s t when à x=0, this is the theoretical tooth thickness. Actual tooth thickness will be less. The subscript e is for upper allowance values and i for lower allowance values. A 15° right handed helical gear must be used with a 15° left handed helical gear. A 45° right handed helical gear must be used with a 45° left handed helical gear. Precision parallel helical gears have a helix angle of 15° and are not compatible with the standard range SH which has a helix angle of 17°45’. p x d a1 d 1 d a1 d r1 s n b a l p n 484 4 Volume  4 2013 d 1 b s t a p t HPC www.hpceurope.com - +33(0)4 37 496 496 Precision gears - Technical information Worms and wheels Description Symbol Unit Formula Axial module m x = m x . sin l Normal module m n degrees = tan -1 (tan a n / cos l) Normal Pressure Angle a n degrees 20° Transverse Pressure Angle a t Lead angle l degrees = tan -1 ((m x . Z 1 ) / d 2 ) Helix angle b degrees 90 - l Number of starts on worm Z 1 Number of starts on wheel Z 2 Profile shift coefficient x 0 as standard 1.m x Addendum h a mm Dedendum h f mm 1.25m x Tooth depth h mm 2.25m x Gear ratio R = Z 2 / Z 1 Centre distance a mm = (d 1 +d 2 ) / 2 (m x .Z 1 ) / tan l Reference diameter of worm d 1 mm mm = Z 2 .m x Reference diameter of wheel d 2 Tip diameter of worm d a1 mm = d 1 + (2m x ) mm = d a1 - (2.h) Root diameter of worm d r1 mm = d 2 + (2m x ) Tip diameter of worm d a2 mm = d a2 - (2.h) Root diameter of wheel d r2 mm = d a2 + m x Outside diameter of wheel d r2 Normal pitch p n mm = p.m n Axial pitch p x mm = p.m x Normal tooth thickness in pitch circle s n mm = s x .cos l mm = (p x /2) + 2m x .x.tan a t Transversal tooth thickness in pitch circle s t Tip diameter is the theoretical diameter of the gear without tooth thickness tolerance applied. For s n & s t , when x = zero, this is the theoretical tooth thickness. Actual tooth thickness will be less. d 2 d r2 d a2 d e2 a XN d 1 h f p n s n h a N X l d r1 d 1 d a1 p x +33(0)4 37 490 055 - cial2@hpceurope.com s x HPC Volume 4 2013 4 485 Worms and wheels –Technical information Efficiency .Efficiency. The following formulae allows an approximate value for the efficiency of a worm/wheel pair to calculated. The efficiency is dependent on the type of lubrication used (these figures are based on use of mineral oil) and do not take into account bearing, seal and other losses. h = tan l / tan (l + pz) T 1 = Input torque (Nm) pz = arctan (m) T 2 = Output torque (Nm) v g = (d 1 . n 1 ) / (19098 . tan l) R = Ratio T 1 = (T 2 / u)* h h = Efficiency l = Lead angle (degrees) m = Coefficient of friction pz = Angle of friction v g = Sliding speed (m/s) n 1 = Rotational speed of worm (rpm) d 1 = Pitch diameter of worm (mm) .Coefficient of friction (Mineral oil). Speed (m/s) 0.0-0.9 1.0-1.9 2.0-2.9 3.0-3.9 4.0-4.9 5.0-5.9 6.0-6.9 7.0-7.9 8.0-8.9 9.0-9.9 10.0-10.9 11.0-11.9 12.0-12.9 13.0-13.9 14.0-14.9 15.0-15.9 16.0-16.9 17.0-17.9 18.0-18.9 19.0-19.9 20.0-20.9 21.0-21.9 22.0-22.9 23.0-23.9 24.0-24.9 25.0-25.9 26.0-26.9 27.0-27.9 28.0-28.9 29.0-29.9 30.0 0 0.1500 0.0438 0.0329 0.0276 0.0242 0.0219 0.0202 0.0187 0.0176 0.0169 0.0161 0.0155 0.0149 0.0146 0.0143 0.0141 0.0139 0.0137 0.0135 0.0134 0.0132 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0123 0.0123 0.1 0.0803 0.0423 0.0322 0.0272 0.0239 0.0217 0.0200 0.0186 0.0175 0.0168 0.0160 0.0154 0.0149 0.0146 0.0143 0.0141 0.0138 0.0136 0.0134 0.0133 0.0131 0.0130 0.0129 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0123 - 0.2 0.0694 0.0410 0.0316 0.0268 0.0236 0.0215 0.0199 0.0185 0.0174 0.0166 0.0159 0.0154 0.0149 0.0146 0.0143 0.0141 0.0138 0.0136 0.0134 0.0133 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0124 0.0123 - 486 4 Volume  4 2013 0.3 0.0623 0.0396 0.0309 0.0265 0.0234 0.0214 0.0197 0.0184 0.0173 0.0166 0.0159 0.0153 0.0148 0.0145 0.0142 0.0140 0.0138 0.0136 0.0134 0.0133 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0124 0.0123 - HPC m for speeds 0-30m/s 0.5 0.4 0.0543 0.0583 0.0369 0.0382 0.0297 0.0304 0.0257 0.0261 0.0229 0.0232 0.0210 0.0212 0.0194 0.0196 0.0182 0.0183 0.0172 0.0173 0.0164 0.0164 0.0158 0.0159 0.0152 0.0153 0.0147 0.0148 0.0144 0.0145 0.0142 0.0142 0.0139 0.0140 0.0138 0.0138 0.0136 0.0136 0.0134 0.0134 0.0133 0.0133 0.0131 0.0131 0.0130 0.0130 0.0129 0.0129 0.0128 0.0128 0.0127 0.0127 0.0126 0.0126 0.0125 0.0125 0.0124 0.0124 0.0124 0.0124 0.0123 0.0123 - - 0.6 0.0521 0.0359 0.0293 0.0254 0.0226 0.0209 0.0193 0.0181 0.0172 0.0164 0.0157 0.0151 0.0147 0.0144 0.0142 0.0139 0.0137 0.0135 0.0134 0.0132 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0124 0.0123 - 0.7 0.0500 0.0352 0.0289 0.0251 0.0224 0.0207 0.0192 0.0179 0.0170 0.0163 0.0156 0.0151 0.0147 0.0144 0.0142 0.0139 0.0137 0.0135 0.0134 0.0132 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0124 0.0123 - 0.8 0.0480 0.0344 0.0286 0.0248 0.0223 0.0205 0.0190 0.0178 0.0169 0.0162 0.0156 0.0150 0.0146 0.0144 0.0141 0.0139 0.0137 0.0135 0.0134 0.0132 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0123 0.0123 - 0.9 0.0459 0.0336 0.0280 0.0245 0.0221 0.0203 0.0189 0.0177 0.0169 0.0162 0.0156 0.0150 0.0146 0.0144 0.0141 0.0139 0.0137 0.0135 0.0134 0.0132 0.0131 0.0130 0.0129 0.0128 0.0127 0.0126 0.0125 0.0124 0.0123 0.0123 - www.hpceurope.com - +33(0)4 37 496 496 Precision gears - Technical information Bevel gears Description Symbol Unit Formula Normal module m n Pressure angle a degrees 20° Shaft angle  degrees = tan -1 ((m x . Z 1 ) / d 2 ) Gear ratio R = Z 2 / Z 1 Pitch diameter d mm = Z.m n Pitch cone angle d 1 degrees = tan -1 (sin / (R+cosÂ)) degrees = Â- d1 Pitch cone angle d 2 mm = d 2 / 2sind 2 Cone Distance R e Addendum h a mm 1.m n Dedendum h f mm 1.25.m n (mod 0.6 to 1) 1.22.m n (mod 1.5 to 2) 1.20.m n (mod 4) mm = d + 2h a .cosd Outside diameter d a Pitch apex to crown X mm = R e .cosd-h a .sind h a X h f F R e d a d d 1 d 2 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 487 Precision gears - Technical information Backlash The backlash figures given for spur, helical and crossed axis helical gears is the theoretical backlash for two identical gears at standard centre distance to the ISO 286 centre distance tolerance. It is given as circumferential backlash in mm measured on pitch circle diameter. An upper and lower value is quoted. Theoretical backlash is the difference between tooth thickness without and with tolerance applied. Backlash is calculated according to DIN 3967 .Tooth thickness tolerance. Gear type Spur Spur (Skive hobbed) Pinion Parallel helical Crossed axis helical Worm + wheel Module 0.5 to 0.8 7e/8e DIN 58405 6e DIN 58405 7e DIN 58405 7e DIN 58405 7e DIN 58405 7e/8e DIN 58405 Gear type Bevel Module 0.6 to 4.0 7f24 DIN 3965/3967 Module 1.0 to 3.0 e25 DIN 3967 e25 DIN 3967 e25 DIN 3967 e25 DIN 3967 e25 DIN 3967 e25 DIN 3967 Centre distance tolerance Js7 Js7 - Js7 Js8 Js8­ A sn : Tooth  thickness allowance which is the difference between measured gear tooth thickness and theoretical value measured in the normal section. When working with a pair of gears the subscripts 1 & 2 denote the input (drive) and the output (driven) gear. For worm and wheel, 1 relates to the worm and 2 to the wheel. The subscript e is for upper allowance and i for lower allowance. T sn : Tooth thickness tolerance measured in the normal section. (mm) A sne = S n - S ne A sni = A sne - T sn = S n - S ni .Circumferential backlash Jt. This is the length of arc on the pitch circle diameter through which each can be rotated whilst the other is held stationary. It is measured in the transverse section. Units are mm and degrees .Normal Backlash Jn. This is the shortest distance between the flanks of the gears when the opposite flanks are in contact. It is measured in the transverse section. Units are mm and degrees For spur, helical, crossed axis helical gears: 488 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Precision gears - Technical information Backlash .Change in circumferential backlash due to Centre Distance Tolerance DJ a . Units =mm and degrees Spur Gear Parallel Helical Gear Crossed Axis Helical Gear Deviation from Change Deviation from Change Deviation from Change centre distance in backlash centre distance in backlash centre distance in backlash DJ a A s DJ a A s DJ a A s 0,001 0,001 0,001 0,001 0,001 0,001 0,010 0,007 0,010 0,008 0,010 0,010 0,015 0,011 0,015 0,011 0,015 0,015 0,020 0,015 0,020 0,015 0,020 0,021 0,025 0,018 0,025 0,019 0,025 0,026 0,030 0,022 0,030 0,023 0,030 0,031 0,035 0,025 0,035 0,026 0,035 0,036 0,040 0,029 0,040 0,030 0,040 0,041 0,045 0,033 0,045 0,034 0,045 0,046 0,050 0,036 0,050 0,038 0,050 0,051 .Angular Backlash. Units =mm and degrees d 2 = Reference diameter (mm) A s = Centre distance tolerance (i.e. a = 30mm Js7, As = ±0.0105mm) a n = Normal pressure angle (a n = 20°) b = H  elix angle (b = zero for spur gears) Replace helix angle b with lead angle l for worm and wheel. = 60 arc minutes +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 489 Precision gears - Technical information .e25 DIN 3967. Reference diameter From - 10 50 125 To 10 50 125 280 Upper tooth thickness allowance A sne -0.022mm -0.030mm -0.040mm -0.056mm Tooth thickness allowance T sn 0.020mm 0.030mm 0.040mm 0.050mm .e25 DIN 58405. Reference diameter d (mm) From 3 to 6 > 6 to 12 > 12 to 25 > 25 to 50 > 50 to 100 > 100 to 200 > 200 to 400 Normal Upper tooth thickness module allowance m n A sne Since 0.16 to 0.25 0.028 Since 0.25 to 0.6 0.030 Since 0.6 to 1.6 0.035 Since 0.16 to 0.25 0.030 Since 0.25 to 0.6 0.035 Since 0.6 to 1.6 0.040 Since 0.16 to 0.25 0.035 Since 0.25 to 0.6 0.040 Since 0.6 to 1.6 0.045 Since 1.6 to 3 0.050 Since 0.16 to 0.25 0.040 Since 0.25 to 0.6 0.045 Since 0.6 to 1.6 0.050 Since 1.6 to 3 0.055 Since 0.16 to 0.25 0.045 Since 0.25 to 0.6 0.050 Since 0.6 to 1.6 0.055 Since 1.6 to 3 0.063 Since 0.6 to 1.6 0.063 Since 1.6 to 3 0.070 Since 0.6 to 1.6 0.070 Since 1.6 to 3 0.080 490 4 Volume  4 2013 HPC Tooth thickness allowance T sn 0.011 0.012 0.014 0.012 0.014 0.016 0.014 0.016 0.018 0.020 0.016 0.018 0.020 0.022 0.012 0.018 0.020 0.022 0.024 0.029 0.029 0.032 www.hpceurope.com - +33(0)4 37 496 496 Precision gears - Technical information Backlash .Example of calculating the backlash for two non-identical gears. Input (Driving) gear: PSG0.5-20 7e Ouput (Driven) gear: PSG0.5-40 7e 1• Calculate the reference diameter d for each gear PSG0.5-20 d 1 = z * m n = 10.00mm PSG0.5-40 d 2 = 20.00mm 2• Find A sne and T sn from the tables on previous page PSG0.5-20 A sne = -0.035mm T sn = -0.014mm PSG0.5-40 A sne = -0.040mm T sn = -0.016mm 3• Calculate A sni for each gear PSG0.5-20 A sni = A sne - T sn = -0.035-0.014 = -0.021mm PSG0.5-40 A sni = A sne - T sn = -0.040-0.016 = -0.024mm 4• Calculate the centre distance of the two gears and the centre distance tolerance centre distance = (10 + 20) / 2 = 15mm Js7 = 0,009mm 5• Calculate the change in backlash due to centre distance j a = 2 A s tan α n tan 20 + 2 0 . 009 = 0 . 007 mm cos β cos 0 6• Calculate the maximum backlash (Remove the minus sign on A sn ) j t = A sni 1 + A sni 2 0 . 035 + 0 . 040 + j a = + 0 . 007 = 0 . 0 82mm cos β cos 0 7• Calculate the minimum backlash (Remove the minus sign on A sn ) j t = A sne 1 + A sne 2 0 . 021 + 0 . 024 + j a = 0 . 007 = 0 . 0 38mm cos β cos 0 8• Convert to angular backlash = 60 arc minutes 28.208 to 13,072 arc minutes +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 491 General terms and conditions of sale Note. This translation of the original Engrenages HPC (Henceforth shortened to HPC) French terms and conditions is offered as a guide only. In the case of any dispute, the French document will apply. 1- Application and acceptance of these general terms and conditions of sale These terms and conditions of sale are made available to all HPC customers and are sent to every customer placing an order. Consequently the act of placing an order with HPC implies complete and unreserved agreement by the buyer to these general terms and conditions of sale, to the exclusion of any other documents such as catalogues produced by the seller, which are provided for information only and are merely intended as an indication, and despite any other information marked on the customer’s order documents, the customer’s terms and conditions of purchase or in any other document transmitted by the customer to HPC. Any conditions other than those relating to products being manufactured to a customer’s specifications, applied by the buyer will therefore by default be not accepted by the seller, regardless of when they may be brought to their attention unless they have been confirmed in writing by the seller. Only specifications relating to custom-made parts can modify these general terms and conditions. The fact that the seller does not immediately apply any of the clauses in these terms and conditions should not be interpreted as meaning that they may not do so at a later date. 2- Orders. Orders must be placed in writing to HPC by the customer. Any order by telephone must be confirmed in writing by the customer within 24 hours or the order will be cancelled. An order will only become definitive and the sales contract confirmed when it is accepted by HPC, this acceptance taking the form of an order confirmation sent to the customer or the delivery of the products ordered. In case of any modification HPC may deem necessary to apply to the customer’s order and confirmed in the order acknowledgment sent to the customer, the latter is assumed to have accepted the modification unless HPC is advised in writing within 24 hours of receipt. No order with a value lower than 20 Euros (before tax) will be accepted, this includes orders passed at the trade counter at HPC’s offices. No order with a value lower than 150 Euros (before tax) will be accepted from customers outside of France (EU countries included) 3- Modifications to orders Any modification to, or cancellation of an order requested by the buyer cannot be taken into consideration unless it is received in writing before the goods (for standard products) are despatched or manufacture is started (for custom-made products) and acceptance of the modification has been expressly confirmed by HPC in a fax addressed to the customer within 24 hours of the request. If either of these conditions is not fulfilled, the products ordered initially will be sent and full payment will become due. However, in the case of a standard parts order placed by a non-professional buyer, they may exercise their right to retraction and cancel the order within 7 days after reception of merchandise. Return carriage costs are to be paid by the buyer. 4- Prices All prices mentioned in the catalogue are quoted without tax. VAT at the current rate, delivery and packing charges as marked in the catalogue and any insurance to which the customer wishes to 492 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 General terms and conditions of sale subscribe will be added to these prices. Different packaging options are detailed in the catalogue and the most suitable will be chosen by HPC at time of shipment unless the customer has made a prior request. Unless stated to the contrary, products are sold at the price applicable the day the order is placed. Prices quoted in the catalogue are those applicable on the date of publication marked on the cover of said catalogue. HPC reserves the right to modify these prices at any time. In the case of non-professionals purchasing by mail-order, prices are guaranteed for 2 months from the date of publication of the catalogue 5- Delivery methods and despatch dates. A- DESPATCH DATES Items in stock on the date an order is accepted can be made available for collection or despatched within a maximum of 72 hours. For catalogue items not in stock at the time the order is accepted or for special items, an estimated despatch time will be sent to the customer when the order is acknowledged. Despatch dates are given as an estimate only and can by no means be used as the basis for any claim for damages, charges for late delivery or interest; neither can they be used as justification for delaying or cancelling of the order, whatever the cause, length or consequences of the delay may be. HPC is released from its obligation to deliver the goods in the case of factors outside of their control such as but not limited to; war, riots, fire, industrial disputes, natural disasters or failure of their suppliers. B- DELIVERY Unless stated otherwise, delivery is carried out by the collection of the goods by customer from HPC’s premises in Dardilly 69570 (France) or by delivery a means of transport chosen by HPC or the customer. Products are sold from Dardilly 69570 France (HPC premises) and are transported at the risk of the customer, the goods remaining the property of HPC until full payment is received as explained in Clause 10. Unless otherwise agreed, goods are sold “ex-works” and transport is carried out at the customer’s cost by a transport method chosen by HPC unless one has been specified by the customer. In case of loss or damage during transit, it is the customer’s responsibility to contact the transporter in writing by recommended letter or other legally accepted means within 3 days of reception of the products (article L133-3 of the French Commercial Code) HPC reserves the right to make partial deliveries from an order where necessary. C- RECEPTION Excepting claims for damaged goods made direct to the transport company concerned, any complaints regarding differences between the products delivered and those products ordered or identified on the delivery document, should be sent in writing to HPC within 30 days of receipt of the goods. It is the buyer’s responsibility to provide full proof of the existence of problems or faults with the goods supplied. He must give the seller access and means to evaluate these problems and to remedy them. He will not however attempt to repair any faults either directly or by the use of a third party. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 493 General terms and conditions of sale HPC’s guarantee is limited to the free replacement or repair of products or components that they have agreed are faulty. Any product for which the buyer wishes to invoke the guarantee must be returned to the seller’s customer service department whose agreement is essential for any replacement. Postage costs will be charged to the buyer if the claim for replacement under guarantee clause is found not to be applicable. 6- Methods of payment Our invoices which will be sent at the same time as goods are despatched, are payable as follows: On receipt, if goods are sold and collected from HPC’s premises 30 days from the end of the month of the invoice date for other sales in Euros, by cheque, credit card, bank transfer, or promissory note, the choice of method of payment cannot change the payment due date. No discounts are made for advance payments. 7- Late or non payment If payment is not made within the period quoted above and after 8 days of receipt of a formal notice of non payment, the customer will be liable for charges equivalent to an interest rate of one and a half times the legal interest rate on the sum owed as well as any costs associated with the final collection of the unpaid sum. Any claims by the customer do not exempt him from paying an invoice on or before the due date. Non or partial payments will lead to the immediate requirement for the customer to pay all sums outstanding to HPC, even if they are not yet due and whatever the intended method of payment might be. 8- Guarantee HPC guarantees the customer against defects that appear in the products sold under the conditions stipulated in article 1641 of the French Civil Code. For products made to a customer’s specifications, HPC’s responsibility is limited to manufacturing items that conform to the specifications supplied but does not guarantee their functionality or suitability for any application the customer may use them for. The customer is solely responsible for the information transmitted to HPC. For standard products, HPC guarantees their conformity to the specifications quoted in the catalogue. HPC’s responsibility and/or the implementation of the guarantee owed by HPC cannot take place more than 30 days after receipt of the goods by the customer. Any claim under the guarantee will be limited to an amount equal to the price paid for the product. In no case can damage caused by a product marketed by HPC be a reason to any claim for damages. In the event that a product manufactured to a customer’s specification infringes the rights of a third party, the customer accepts responsibility for refunding all the costs (procedure, claims, damages, lawyers’ expenses, other advisors...) suffered by HPC and will actively cooperate at his own expense in the defence of the latter. The guarantee will be considered void if products have been modified or interfered with in any way by the customer without prior written agreement from HPC or if the products have been used in any abnormal way or under unsuitable conditions taking into account their characteristics and normal applicable uses and standards (in particular in the event of use or installation in any aerial or rocket engine for which the products are completely unsuited) 494 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 General terms and conditions of sale 9- Return of material Every returned product must be the subject of a formal written agreement between the HPC and the customer by fax or by mail. Any product returned without this prior agreement will be stored on behalf of the customer but will not oblige HPC to provide a refund or replacement. This agreement is not however necessary when a non-professional buyer exercises his right to retraction as provided for by French law. In any event, no product returned more than 30 days after receipt of the product by the customer will be accepted. The cost of returning a product is always the responsibility of the purchaser and the risk in the product remains with him. Any returned product must be addressed to HPC’s registered office. The choice of transporter will be made by HPC. Products that are returned will be subject to formal inspection for both quality and quantity. Once accepted by HPC, a Credit Note for the value of the products valid for duration of six months will be issued. However, the right of a non-professional buyer to return goods for a refund remains unchanged, so long as the products are safely returned to HPC. In the case of an obvious defect or the delivery of the wrong product, once accepted by the seller, the buyer will either receive at the discretion of HPC, replacement products or a refund, no other charges or penalties will be accepted. 10- Retention of ownership The transfer of property in any standard or custom-made part is subject to the full payment of the invoice, payment is understood to take place the day funds reach HPC’s bank account. The prevision above do not prevent the risk in the product passing to the customer (in particular risk of loss, deterioration, and damage caused by the parts) once the parts have been dispatched or delivered by HPC. If a customer supplies a product for modification, repair or to be used as a model, the customer remains the owner of the original product and is responsible for the cost of their transport to and from HPC. The customer also accepts all risks related to their transport, any possible modification by HPC, and any damage that might be caused. 11- Applicable law - Court of jurisdiction Sales concluded with HPC are controlled by French law. Any dispute which may arise between the two parties relating to the interpretation and/or execution and/or termination of the contract will be brought before tribunals of the jurisdiction where the registered office of HPC is located, even in the event of an introduction of third parties or multiple defendants. +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 495 Part number 203R 712 Volume 1 2 3 4 5 PERIFLEX ® handle A Page Part number 2 66 1 78 80 1 87,95 4 42, 202 AAG, ABG toothed bar 4 167 AB anti-backlash wormwheel 5 194 197 antistatic brush ABL ABM anti-backlash wormwheel 4 158 159 anti-backlash wormwheel 4 166 ABS 1 112 113 hook AC 2 112 splined shaft ACA 5 301 343 angle bracket ACL New 1 145 147 bonnet fastener ACM 4 43, 203 ADG, ASG toothed bar 1 298 299 eye bolt ADL 2 76 Rigid coupling AF AFM, ASM Iglidur cylindrical polymer bush 3 28 33 2 50 53 AK, AKD, AKN coupling Gerwah 2 144 146 power supply DC ALI 5 127 129 APB, APB BOU Adjusting rod 4 193 Plastic flexible rack ARL 4 66 77 Timing pulley AT 4 64 65 Toothed bar AT 4 78 79 Timing belt AT 4 80 Timing belt per metre AT-M 4 81 Connecting plate AT-P 1 220 221 Elasto mount AT-ZY 4 80 Imperial pulley A-W 3 199 Aluminium shaft AWMP 1 224 227 A-ZY(ss) cylindrical mount B, B/Eco B332 B3PAN BAB BAG BAP BAN New BBP BC BCA BCH BCM BDP New BEF, BEK New B 4 116 117, 122 123 Bevel gear 2 271 Reducer 2 35 Panamech Multi-Beam 1 28 39 clamping pin locking assembly 2 106 107, 111 clamping collar 2 104 105 5 92 93 5 55 Angular clamp 3 76 plastic thrust bearing 2 32 33 Panamech Multi-Beam 2 113 splined bush 1 93 mushroom knob 5 178 183 cylindrical brushes 5 25 27 Holding arm miniature leadscrew 3 280 281 496 4 Volume  4 2013 HPC Volume 1 2 3 4 5 Page 1 344 BETA New spring pin 1 326 shaft locking washer BFA New 3 273, 276 5 35 flanged nut BFM 2 38 39 coupling OLDHAM BG(C) single housed bearing assembly 3 64 67 BH socket head button screw 1 408 BHC 5 60 ball transfer unit BISF 2 218 241 BL, BLH, BLHT right angle helical 2 222 238 BLHB, BLHO, BLHI right angle helical 2 223 242 right angle helical BLHM 1 56 spring loaded plunger BLM 5 252 doorstop BLOC 1 348 349 BOX-DH, BOX-DHX dowel pin 1 390 391 self tapping insert BOX-INS 1 346 347 BOX-KK, BOX-KU key 1 350 351 BOX-P, BOX-SAP spring pin 1 57 59 spring plunger BPM 5 61 ball transfer unit BPOM 3 48 50 BPF, BPFL, BPP flanged bearing 5 152 153 end cap BPTR 5 254 panel holder BRI 2 30 31 Panamech Multi-Beam BS 3 284 ballscrew bearing unit BSB 1 54 55 spring plunger BSM compact precision slide 3 130 135 BSP BSPM New miniature leadscrew 3 278 279 5 126 single rod clip BSPT 5 154 156, 244 end cap BTC BTE, BTE(ss) universal tension arm 4 110 111 5 62 ball transfer unit BTEU 5 58 59 BTEU, BTHD ball transfer unit shaft and bush splined 2 114 117 BUC 2 139 gearboxes BUH 5 253 panel stop BUT compact precision shaf 3 136 141 BWU 1 228 231 B-ZY(ss) cylindrical mount CAB CAP CC, CT CCL(ss) CD CDR CF(S), CFES C cable plate chain locking assembly wire thimble compression spring cable for clamping pin came follower 1 266 267 5 72 79 2 108 109 1 268 269 1 160 171 1 38 3 255 256 www.hpceurope.com - +33(0)4 37 496 496 Volume 1 2 3 4 5 Page 1 53 spring loaded CFC 3 257 CFCL New came follower 3 107, 109 CFF(ss) rod end 3 252 254 came follower CFU 5 206 217, 260 262 hinge CHA 5 154 161 CHAEU New decorative hinge 5 225 CHAFR New adjustable friction hinge 5 218 224 hinge CHA-R 1 400 405 socket head screw CHC 2 282 295 CHM, CHMR reducer CHM-BR, CHM-X arm and shaft 2 296 297 5 112 CHM-MOT motor-reducers AC 2 160 163 5 110 111 straight long link chain 1 288 289 CHN(ss) asynchronous AC motor 2 155 159 CHT 2 272 275 right angle helical CHTRB 2 276 281 right angle helical CHTRP 1 98 101 CLA, CLB indexing handle moulded spur gear 4 238, 256, 270, 280, 288 CLG 3 116 117 clevis components CLM(ss) 3 114 clevis components CLS, CLP 3 115 CLL, CLLP clevis components 3 118 CLS(ss), CLP(ss) clevis components 1 296 297 chape CMA 3 106, 108 CMM(ss) rod end 4 188 imperial section rack CR imperial section rack 4 196 197 CRM 1 316 319 locking assembly CS, CSH 3 98 99 spherical bearing CSS(ss) telescopic universal joint 2 88 89 CT, CTH 1 222 223 diabolo mount CT-ZY 1 324 325 circlip CX, CY Part number D Part number DOMi DP DR DSF DST, DT D-ZY Volume 1 2 3 4 5 adjustable slide dowel pin flexible rack clutche pinion shaft elasto buffer E Page 3 326 343 1 340 341 4 192 2 100 101 4 168 171 1 232 238 reducer E rivet nut EAS u bolt EBM well nut ECF ECPR New high helix leadscrew support bracket EDS Igubal ® flange unit EFSM fixing support EFTC coaxial reducer EHD stainless steel u bolt EiM coupling GERWAH ® EKN EMS, EML, EMR thumb screw spring pin EP quick fitting cable ERC ESCB, ESSB bipod tripod ESST extension spring ET E-X, E-DX output shaft cylindrical buffer E-ZY 2 210 216 1 372 375 1 314 FB, FB/Eco FBL FDS(Q) FF FGWA FHC FiB FiRST FR New FRT FS FTSN FU 4 120, 126 5 184 190 2 68 71 1 172 spring in metre D 4 118, 124 DB, DB/Eco bevel gear 2 34 Panamech Multi-Beam DBC 5 100 103 idler DBL 5 17 19 DCA, DCG, DFG suction cup 4 162 165 double spur gear DG 3 102 105 rod end DGS 1 337 339 dowel pin DH 1 342 343 dowel pin DHX 1 42 45 DiL, DiA, DiV locking bolt 1 238 239 G, GD D-KON, D-PAR(ss) elasto buffer ® 2 48 49 G coupling GERWAH DKN 2 140 143 GA, GSi motor-reducer DC DOG GAL +33(0)4 37 490 055 - cial2@hpceurope.com HPC F bevel gear brush strip flexible shaft reducer end support countersunk screw motor-reducer AC servo amplifier thread inserts rotary damper spring washer supported shaft nut for bearing G 1 219 3 261 5 133 3 61 5 251 2 250 255 1 315 2 46 47 1 89 92 1 330 333 1 274 275 5 157 159 5 83 1 174 183 2 217 1 236 237 2 244 249 3 205 1 406 407 2 152 153 2 148 149 1 378 381 1 208 210 3 89 3 198 3 86 87 2 82 83 universal joint 4 204 291 spur gear gas spring 1 201 205 5 226 229 conveyor wheel 5 46 47, 49, 51, 94 97 Volume 4 2013 4 497 Part number GB GBS GCA, GCT New GCB GDR GE GE GG GGB GGP GLB GLP GLT GMC, GMK GP GPB GR GTC, GTC(ss) Volume 1 2 3 4 5 Page Part number 4 216, 230, 239 brass spur gear 3 283 nut for ballscrew 1 328 329 spring pin 5 106 107 curved track 5 104 105 straight track 1 108 110 toggle latch 3 94 97 spherical bushing 4 448 457 ground spur gear 1 82 wing knob 1 83 wing knob 1 84 small 6 lobe female handle 1 85 small 6 lobe male handle 5 234 241 telescopic slide 5 118 125 guide 1 111 toggle latch 1 86 threaded spherical knob centerless ground shaft 3 25 5 48, 99 4 102 103 belt tension rollers H Volume 1 2 3 4 5 Page KB-OP KGLM KGS KH KIT New KK(ss) KM KR KS KSM KSTM 3 215 linear bearing 3 101 Igubal ® spherical bearing 3 282 ballscrew 3 206 linear bearing 2 24 V dc motorisation kit 134 135 1 keysteel 322 323 3 80 bearing locknut 3 249 plastic cam follower 1 321 keysteel 3 270 cylindrical nut 3 62 63 Igubal ® block bearing LA LAC LAT LB(E) LC LF New LFM LINK LPR New LOQ LR LRH LRM LRR LRX LSAG LSM LVT LWL, LWH 3 323 325 linear table 1 102 103 came lever 3 292 297 linear actuator 3 208 miniature linear bearing 2 98 99 clutche 3 84 85 bearing accessories 3 262 263, 274 5 34 leadscrew 2 154 motor-reducer AC 3 260 high helix leadscrew 5 257 manual lock 3 82 83 precision locknut 3 266 leadscrew 3 272, 275 trapezoidal nut 1 134 135 spring loaded latch 3 164 171 linear roller slide precision linear rotary 3 122 129 3 264 265 leadscrew miniature motorised actuator 3 298 305 3 142 163 linear ball slide L needle roller universal joint 2 84 85 H, HD 4 316 326 helical gear H 3 240 half rail guide HBM 1 414 415 HC set screw HCV, HRV v-rail guidance system 3 246 247 3 75 one way needle bearing HFL 3 214, 217 HFMC, HFMCN linear bearing New 4 296 300 spur gear HG, HPG manual locking clam 3 174 177 HK 1 76 77 handwheel HLU(T) 1 352 353, 358 HS, HSE, HSB spacer 1 394 395 shoulder screw HSS 4 18 19 toothed bar HTD M 4 20 28 timing pulley HTD 2 90 cover for universal joint M 3 238 239 HTS, HTT, HW half rail guide 4 139 157 worm and wheel set M, PM 1 280 281 I MAC(ss) New carabiner 1 94 3 112 MAN lever 180 ° ball and socket joint IBJ 2 136 137 4 172 180 MAX internal gear motor-reducer DC IN 1 384 389 MB 3 81 insert stop washer INS shock absorber 1 215 MC J 1 392 sleeves 2 256 262 MCL coaxial reducer J, XJ 5 54 55 brush panels 2 86 87 MCS universal joint JCD, JCS 4 131 JFM, JSM Iglidur ® cylindrical polymer bush 3 26 27 MDB, MTB bevel gear 2 150 potentiometre MDPOT K 1 276 277 MDR(ss) dee shackle 3 209 2011 KB, KBS, KBWW linear bearing 5 132 MDS New hub clamp 498 4 Volume  4 2013 HPC www.hpceurope.com - +33(0)4 37 496 496 Volume 1 2 3 4 5 Page 4 130 bevel gear MEB 1 62 cylindrical handle MEP ® Metafram cylindrical bush 3 34 41 MET(C) 1 217 shock absorber flange MF 2 42 45 bellows coupling MFB(S) 4 132 MFB, MHB bevel gear MGS New support brush 5 52 53,176 177 1 64 66 MH, MHQ arm with handle 2 36 37 MHS, MHW coupling 1 sleeves 360 361 MHX 1 278 279 bow shackle MLY(ss) 1 spacer 354 357, 359 MPB, MPE, MPS 4 186 187 MR(S), MMR rack 1 290 291 MRA(ss)-Eco quick link 1 292 293 MRA(ss) quick link mini-profile mounted adjusting unit 5 355 357 MURP Part number N 2 147 servo amplifier NANO 3 250 cam follower NAST 5 246 250 connector NCT 5 22 123 NDS New adjustable clamp 1 419 self locking nut NIN 5 148 adjustable clamp NJM Drylin N ® miniature guiding system 3 178 181 NK, NW 5 144 146 NPCR, NPR, NSA adjustable clamp 5 139 143 NPTF, NPTR adjustable clamp NSB, NSO linear bearing housing 3 218, 220 ® NSKB New Drylin N miniature guidance 3 182 5 147 adjustable clamp NSR 2 263 269 coaxial reducer NT, NH 1 409 413 set screw NTM OP O indicators P 1 150 157 5 30 33 2 184 206 reducer P 1 327 self locking counter nut PAL 1 253 PAM, PAMF articulated foot 1 250, 252 articulated foot PAMF articulated foot 1 263 5 164 165 PAT 1 254 vibration dampening foot PAV 3 68 69 plastic ball bearing PB 4 356 357 precision bevel gear PBG conical flexible mount 1 261 262 PCF 1 96 97 handle PCLA Volume 1 2 3 4 5 Page 5 138 cell carrier assembly PCP 4 90 95 chaine sprocket PCS(ss) 1 382 383 PCW New filet rapporté motorised linear slide 3 346 359 PDU 2 reducer 185 205 PF 1 242 fixed rubber foot PFC 2 54 coupling P-Flex PFL 1 258 articulated foot PFM 4 204 291 spur gear PG folding cylindrical revolving 1 63 PGR 4 386 387 PGRR, PGRS precision rack 5 258 sliding profil PGT 4 460 471 precision helical gear PHG 1 362 366 PLB, PLN, PLS cylindrical spacer 1 138 magnetic stud PLC, PLT PLM, PLA magnetic stud New 1 140 144 flexible machine mount 1 259 260 PMC 2 64 66 coupling PERIFLEX ® PNA 1 104 carrying handle PO, PX 5 255 handle PO 2 207 209 reducer PP 1 46 clamping pin PPD 1 47 clamping pin PPF 1 311 precision pinion shaft PPS precision pinion shaft 4 390 395 PPS articulated foot 1 244 247 5 160 395 PR 5 86 91 idler sprocket PR 5 37 41 manual bench press PRES 5 266 354 profile PRF 5 108 109 PRL, PRZ wear strip 1 254 256 articulated foot PRS 3 344 345 rotary table PRT 3 88 precision stainless shims PS 4 396 422 PSG, PSG-H precision spur gear 4 424 437 PSG-DL, PSG-PK precision spur gear 4 398   423 PSG-S, PSG-SL precision spur gear 4 440 447 PSG-HC, PSG-HCK precision spur gear 5 259 panel accessories PSP 5 80 85 drive sprocket PT 4 47 55 timing pulley PT 1 250, 252 articulated foot PTAF 1 248 249, 251 levelling foot PTA(ss) 1 287 threaded eye hook PTB(ss) 4 15, 17 detachable V belts PTP PTR, PTR(ss) Idler chain sprocket 4 108 109 Part number +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 499 Part number Volume 1 2 3 4 5 Page Part number 5 28 29 SC2 New suction finger worm-precision range 4 360 382 SCA, SCE wheel-precision range 4 361 383 SCH 2 222 SCR output shaft precision helical gear 4 472 481 SDA, SDB Q6 QFM, QM QTC New 3 70 71 radial bearing Oilite ® cylindrical bush 3 42 46 clip on quarter turn latch 5 200 201 Q R 4 184 rack R 1 186 193 die spring R 5 116 117 roller guide RAG 5 44 45 RAG-FLOW roller track 3 113 90 ° ball and socket joint RAS(ss) 1 194 197 dynamic washer RBS 1 416 RCC, RCX self aligning washer 1 286 RDC(ss) New rigging screw 2 40 41 coupling ROTEX ® GS RGS 1 367 371 rivet RIV 5 230 233 sealing strip RJA 3 224 RJZM, RJUM Drylin ® bearing Rollring ® chain tensioner 4 106 107 RLR 5 50 free running conveyor roller RLX 1 216 shock absorber RMSA 3 251 cam follower RNAST 5 63 64 ROB, ROS caster 5 65 66 ROCPL, ROCTR caster 5 67 69 ROE, RES, RES(ss) caster New 3 285 ballscrew bearing unit RPB 4 29 37 timing belt RPP 4 38 connecting plate RPP-P centerless ground shaft 3 24 5 98 RSH 2 124 129 RT(T), RTL locking assembly 2 62 63 coupling ROTEX ® RTE ® 2 58 61 RTK, RTN coupling BoWex S S, SF S2B, S2O SA(KH) SAS SBR, SUA SBS S 4 86 89 chain sprocket stainless steel ball bearing 3 72 74 linear bearing housing 3 219, 221 3 207 linear bearing housing 4 96 97 clutche 4 96 97 chain per metre chain per metre stainless steel 4 98 99 500 4 Volume  4 2013 HPC Volume 1 2 3 4 5 Page 2 77 rigid coupling 1 270 273 cable clamp 1 127 toggle clamp 5 21 suction cup threaded insert 1 locating bolt support bracket 40 41 5 134 135 support bracket SDG(ss) 1 125 126 SEH, SEV toggle clamp 5 256 magnetic doorstop SER 3 110 111 SFE, SME rod end Unibal ® 3 204 end support SFWR 1 114 121 SGV, SRG adjustable latch 4 304 314 helical geer SH 1 68 70 handwheel SHA 1 418 nut SHN 1 396 399 SHS, SHSS shoulder screw 3 318 321 SHTC, SHTP Drylin ® linear table 1 417 washer SHW 1 81 star knob SK 3 271 hexagonal nut SKM 1 48 49, 52 SLB(ss), SLBS clamping pin 1 50 51 SLBW(ss) index bolt 1 122 124 SLH, SLV toggle latch 1 130 131 SLHH, SLHV toggle clamp 3 350 353 5 358 363 SLM guide SLS trapezoidal rolled leadscrew 3 277 1 132 133 SLVV, SLVH toggle clamp 3 225 linear table SMLS 5 166 levelling support SPIT 4 185 rack SR 1 334 336 slotted spring pin SRP 4 191 plastic flexible rack SRS stainless steel bevel gear 4 128 SSB 4 129 SSDB, SSTB, SSFB stainless steel bevel gear 3 100 Unibal ® spherical bearing SSE stainless steel spur gear 4 217 273 SSG 1 218 elasto buffer STC 5 119, 348 guidance brush STL 4 14, 16 detachable V belt STL 5 191 193 sealing brush strip STRIP 3 47 stroke rotary bush STU 2 118 locking assembly SUP 1 112 115 adjustable latch SVG 3 306 317 SVT, SVR screwjack New 4 138 156 worm SW(H) PV PW, PSW PWG P-X, P-DX PXHG www.hpceurope.com - +33(0)4 37 496 496 Part number Volume T 1 2 3 4 5 Page Part number 4 44 46 toothed bar T 4 57 61 timing belt T 4 47 55 timing pulley T 1 173 spring in metre T 4 62 timing belt per metre T-M 4 63 connecting plate T-P 1 184 185 torsion spring T0 1 282 283 rigging screw TAC(ss) 1 243 plastic foot TAD 3 77 79 axial thrust bearing TB(ss) 4 119, 125 TB, TB/Eco bevel gear 1 284 285 rigging screw TCC(ss) 2 164 speed drive controller TEL 4 105 tensioner plate TFR New 1 393 threaded bar TIF 3 212 linear bearing TK 3 216 linear bearing TK-OP 5 20 suction cup threaded insert TM 4 104 TMR New tensioner plate 5 130 131 TOC, TOL swivel head 4 112 universal tension arm TPX 4 189 191 TR(M), TRM(ss) rack ® 3 172 173 Drylin linear slide TS, TW 2 119 123 locking assembly TTQ 5 245 square tube TUBE U 2 78 80 universal joint U flange bearing 3 52, 56, 59 5 169, 172 UCF flange bearing 3 53, 57, 60 5 170, 173 UCFL block bearing 3 51, 55, 58 5 168, 171 UCP 3 54 take up bearing UCT 3 357 UGAC, UGET actuator guide kit 3 356 actuator guide kit UGCG 3 358 362 H type guide unit UGH 3 354 255 UGPC, UGPL actuator guide kit UtiliTrack ® linear guide 3 226 235 UTK V3RA VAP VKM VLBG New VLBS, VRBS VML VMS V handwheel magnetic stud square nut hoist ring hoist ring set screw set screw VPRAM VRBG New VRC VRM VRS(ss) VT(A) Volume 1 2 3 4 5 handwheel hoist ring retaining clamp hoist ring hoist ring clutche W Page 1 67 5 36 1 309 1 136 137 1 305 1 302 304 2 94 95 4 138 156 worm and wheel W(H) 1 310 hoist ring WBG 3 269 flanged nut WFRM WJRM New Drylin ® W modular guidance 3 196 197 3 268 cylindrical nut WSRM 3 184-195 WS,WW,WJUM Drylin W ® rail New WSS(SS) symmetrical S shaped hook 1 294 295 X XG XJ/J spur gear coaxial reducer YG spur gear Y Z shaft for linear guide ZA, ZB bevel gear ZB ZDB, ZTB, ZFB bevel gear spur gear ZG, ZPG spur gear ZGDR helical gear ZH ZHG, ZHPG spur gear internal gear ZIN ZM, ZPM worm and wheel rack ZR helical gear ZSH ZSW, ZW worm and wheel 4 226 293 2 256 262 4 226 293 3 200 201 4 133 134 4 135 4 228 295 4 194 195 4 317 325 4 297 301 4 172 180 4 139 157 4 198 4 305 313 4 138 156 1 71 73 1 139 3 267 1 308 1 306 307 1 91 1 88 +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 501 A Index by name Anchor Anti-backlash Arm Assembly ball knobs ball transfer unit bar bearing belt belt V bevel bipod block B bolt bonnet fastener boxed set bracket brake brush brush panels 502 4 Volume  4 2013 Volume ➊➋➌➍➎  Page for aluminium profil spur gear wormwheel holding rotating handle universal tension assembly element cell carrier female keysteel accessories for bearing block bearing DryLin ® W hybrid bearings flanged bearing for ball housed linear bearing housing trapezoidal rolled leadscrew thrust bearing spheric metre T-type timing belt timing pulley detachable bevel gear precision bevel gear support base ballscrew bearing unit linear bearing housing screw block manual key pin insert for aluminium profile for motor-gearboxes antistatic cylindric for ensuring an internal seal sealing brush strip guidance Mink Guard for material handling HPC 312 313 166 167 158 159 25 27 64 66 110 111 104 129 138 87 56 62 321 323 80 90 51 63, 168 173 196 197 48 50 68 75 ➌  64 67 218 224 277 76 79 94 101 37, 62, 80 57 61, 78 79 29 36 14 17 116 135 356 357 157 159 ➌  280 281, 284 286 ➌  218 221 347 314 315 145 147 346 347 348 351 390 391 304 307 ➋  150 194 197 178 183 184 190 191 193 118 119 176 177 55 ➜  64 www.hpceurope.com - +33(0)4 37 496 496 B Index by name bush button Cable Cable clamp Cable clip Cam Carabiner Carriage Caster Catch-plate Chain Circlip Clamp Clamp lever C Clamping pin Clevis Clutch Connection Control knob Conveyor Corner reinforcement Coupling Volume ➊➋➌➍➎ Page 26 46 206 217 47 93 46 52 86 87, 95 78 81 254 for linear movement linear and rotary mushroom clamping pin knobs knurled knob panel holder guiding profile clamp single rod clip galvanised for came follower steel adjustable UtiliTrack ® 3 wheel linear motorised system for use with aluminium profile industrial for latch cable-carrier staight long link per metre wide plate hose self-centering with threaded insert stainless steel square tube manual components for aluminium profile BoWex® curved tooth gear flexible bellows flexible coupling for servo-motors torque friction clutch GERWAH ® miniature OLDHAM® +33(0)4 37 490 055 - cial2@hpceurope.com HPC 123 125, 308 126 266 267 270 273 340 341 257 280 281 139 148 230 231, 234 235 351 353 318 319 64 71 134 135 289 288 289 96 98 72 79 324 325 316 319 118 129 96 101 94 28 39 114 115, 117 94 101 246 250 150 157 152 173 309 58 61 42 53 36 37 30 54 94 101 46 53 46 49 38 39 Volume 4 2013 4 503 C Index by name cover dampener door seal doorstop End cap Eye bolt Eye screw Fixing Floor anchor Follower Foot Free running gas spring gear D E F G gearbox 504 4 Volume  4 2013 Volume ➊➋➌➍➎ Page PANAMECH - MULTIBEAM PERIFLEX ® rigid ROTEX ® ROTEX ® GS single universal joint transmission for open channel profile rotary for aluminium profile for square tube for aluminium profile anchoring bracket belt tension rollers conveyor wheel follower came for aluminium profile anchor foot for aluminium profile bipod or tripod support vibration dampening for gravity roller conveyors anti-backlash bevel gear crossed helical delrin precision spur gear grade 8 double spur ground spur gear internal parallel helical axes precision bevel gear precison crossed axes grade 7 precison helical parallel axes grade 7 precision spur gear grade 6 precision spur gear grade 7 shaft spur inline spur gear reducer internal epicyclic miniature HPC 30 35 64 66 76 77 62 63 40 41 78 91 58 73 288 378 383 354 252 152 156, 244 298 311 296 297 114 118 314 375 290 295, 308 310 102 103 46 47, 49, 51 249 257 345 311 157 159 242 262, 160 166 263 50 201 205, 226 229 166 167 116 135 316 326 424 437 162 165 448 457 172 180 304 314 356 357 472 481 460 471 440 447 396 423 168 171 202 301 256 269 250 255 271 www.hpceurope.com - +33(0)4 37 496 496 Index by name Gearbox Volume ➊➋➌➍➎ Page right angle reducer spur gear reducer worm and wheel gear 210 242, 271 281 244 249 184 209, 282 297 248 298 363 492 364 General terms and conditions of sale actuator guide kit 354 362 Guiding Drylin W 184 197 half-rail 236 243 Guiding linear 122 257 modular linear 358 363 rotary motion 24 90 UtiliTrack ® linear guide 226 235 v-rail guidance system 244 247 117 122 Guide curved 106 107 straight 104 105 in H 358 362 Guide units 255 handle carrying 104 clamp lever 96 101 cylindrical revolving 62 63 door handle for aluminium profile 329 331 for indexing 96 101 mushroom 95 spherical 86 star 80 81 44 69 handling made to measure 67 77 handwheel small 6 lobe handle 84 85 rod end 102 111 head swivel head 130 131 technical informations 329 330 heat tratment angle plate for aluminium profile 301, 320 hinge ball and socket joints 112 113 bearing 98 101 clevis components, short version 114 118 for aluminium profile 321 hinge pin mechanical 150 157 Indicator for suction cup 20 21 Insert self-tapping 384 391 set screw fixing 76 77, 118 129 jaw for aluminium profile 297 joining bar ball and socket 112 113 joint for aluminium profile 350 353 quick 274 275 rubber cover for univeral joints 80, 90 G H I J +33(0)4 37 490 055 - cial2@hpceurope.com HPC Volume 4 2013 4 505 Index by name Junction Kit latch leadscrew lever linear table linear slides link lock K Volume ➊➋➌➍➎ Page chain link connecting plate motorisation L locking assembly locking bolt lockut machine - accessories machine tool parts made to measure magnetic stud manual bench press mini-actuator mini-adjusting unit modular structures moto-gearboxes motorised linear slide quick lock system machine accessories M P one way needle bearing open channel panel peek ® pin pinion motorised mounted on profile AC DC motorised linear actuator nut N informations O 506 4 Volume  4 2013 bearing locknut for aluminium profile knurled thumb nut rivet nut thumb trapezoidal wing knob for aluminium profile brush connecting plate for aluminium profile precision spur gear precision worm and wheel coiled spring anti-backlash gear bevel gear chain chain tensioner HPC 97, 99 38, 63, 81 134 135 134 135, 257 262 266, 274 102 103 225, 318 325 346 349 290 293, 97, 99 256, 332 108 147 200 241 118 129 42 45 80 87 200 241 16 41 327 353, 482 491 138 144 37 41 300 305 355 357 266 315 151 165 132 143 292 362 80 87 294 89 90 372 375 92 267 276 82 75 287, 341 54 55 38, 63, 81 298 300, 314 315 424 437 372 383 330 336 166 167 116 135 86 95 106 111 www.hpceurope.com - +33(0)4 37 496 496 P Index by name Pinion Profile Positioning-Indexing Potentiometre Power supplies rack rail retaining clamp rigging screw right angle rivet rod rotary table rubber screw R S Volume ➊➋➌➍➎ Page double spur gear drive sprocket helical gear internal precision helical gear precision spur gear precision shaft shaft toothed bar to order aluminium dual purpose strip for aluminium profile guide sliding profile stainless steel wear strip for motor-gearboxes precision standard guide roller guide quarter turn latch chain sprocket with hook/eye reducers for clamp drive rubber wheel anti-backlash lead screw ballscrew BHC CHC compression spring driving screws FHC for aluminium profile HC high helix leadscrew knurled thumb screw +33(0)4 37 490 055 - cial2@hpceurope.com HPC 162 165 80 84 304 326 172 180 460 481 390 457 390 395 202 213 202 277 288 346 120 122 258 259 276 108 109 28 59 150 144 146 386 387 184 199 122 247 116 117, 44 45 200 229 136 137 286 104 111 282 285 210 242, 271 281 367 371 127 129 344 345 80 84 63 323 325 282 283, 278 279 408 400 405 53 59 258 289 406 407 295 414 415 260 261 88, 91, 409 413 Volume 4 2013 4 507 Index by name Volume ➊➋➌➍➎  Page screw precision shoulder stainless steel steel wing knob worms and wheels sealing strip servo amplifier shackle bow straight centerless ground flexible for linear guide splined self-centering locking washer splined precision shaft shaft collar shims shock absorber S rotary shocks shoulder screw sleeves slide spacer spring cylindrical hexagonal spring loaded position switch spring plunger square square tube structures suction cup suction finger support bracket support 508 4 Volume  4 2013 linear telescopic cylindrical hexagonal compression gas narrow spur rack torsion traction with moving nut electric contact connector magnetic stud with bellows rotation fixing support HPC 358 383 ➊  394 399 ➊  396 ➜  399, 404 407 394 395, 400 403 82 136 159 230 233 ➋  147 149, 164 278 279 276 ➜  277 24 ➜  25 ➋  68 73 198 203 ➋  113, 115 117 ➋  118 129 326 ➋  113, 115 117 ➌  88 219 239 208 211 212 218 396 392 360 361 294 295 130 173 234 241 362 366 352 361 160 172 201 205 226 229 186 193 184 185 172 183 306 317 53 54 58 246 250 244 262 138 144 16 21 28 29 133 251 www.hpceurope.com - +33(0)4 37 496 496 Index by name Support Teeth’s size T Threaded adjustable Thrust Timing pulley Toggle Toggle clamp Tripod Tube universal joint washer wire thimble wheel worm and wheel U W Volume ➊➋➌➍➎ Page for detector for guide for guiding shaft shaft support for aluminium profile gears racks bearing shaped elasto mount panel stop modular structures heavy duty support base square rubber cover dynamic self aligning spring washer standard for cable belt tensioner rollers conveyor wheel idler sprocket roller wheel for aluminium profile rubber tyred wheel precision range standard +33(0)4 37 490 055 - cial2@hpceurope.com HPC 336 337 134 135 204 205 344 199 181 243 76 79 219 239 253 324 328 47 55, 66 77 20 28 108 121 122 133 159 245 80, 90 194 197 416 89 417 268 269 102 103 46 47,49,51,94 97 86 91 345 63 360 383 138 159 Volume 4 2013 4 509 24/48h delivery* for articles in stock +33(0)4 37 496 496 - www.hpceurope.com *Contact us for full details HPC in Europe Italia Ct Meca S.r.l. Corso G. Marconi 10 10125 Torino - Italia www.ctmeca.com E-mail: info2@ctmeca.com Tel: +(39) 011 760 95 05 Fax: +(39) 011 760 91 51 France United Kingdom Engrenages HPC Ondrives Ltd. 58, chemin de la Bruyère 69570 Dardilly (Lyon) - France Tél. : +33(0)4 37 496 496 Fax : +33(0)4 37 490 055 Foxwood Industrial Park Chesterfield, Derbyshire, S41 9RN, UK Tel.: +44 1246 455 500 Fax: +44 1246 455 522 E-mail: cial2@hpceurope.com E-mail: sales@ondrives.com www.hpceurope.com www.ondrives.com FREE Catalogues ate Immedi ad downlo RTL4 50_F rett eDeS erra ge 1/02 /12 Fret Cou te de 16:0 3 - Se Page place - Couple - Autocen entre 1 - Pression transm 1 l'arbre - Montag trant issible Page - Pas uniform et très l'alésag - Elimine de e et 16:03 élevé ément 2 contrai jeu démont e répartie clavett les 1/02/1 - Augme ntes concen age facile dues tration rage l’arbre e C - Résiste nte aux la eDeSer s de - Possibil section rainure L aux _Frett série B s de - Matière ité de mouvem résistan RTL450 .Optio : acier monter ents alterné te de 3 élémen - Autres ns. s (jusqu’à diamèt ts en .Info. un res C alésage disponi - * L . - * P N : bles d=300m B P W Pression ØA : Pression ØD et l'alésage m) de l'arbre très élevé le entre de surface surface place transmissib sur répartie - Se ØD ent facile nt Référen sur le moyeu ØA - Couple l’arbre RTL450-2 ces uniformém - Autocentra démontage de de RTL450-3 ions - Pression et ØA RTL450-3 5-55 rainures - Montage de jeu concentrat RTL450-3 0-55 les dues aux ØD 25 de - Pas s RTL450-4 5-60 30 - Elimine résistante 55 B RTL450-4 8-75 contrainte 35 section 55 RTL450-4 0-75 REMI 38 clavette la 32 ts alternés en L 60 RTL450-4 2-75 Qté 40 32 SES - Augmente mouvemen 3 éléments 75 40 RTL450-5 5-75 C Rem. 1+ 42 l’arbre aux monter 44 Vis Couple 75 40 Prix 6+ RTL450-5 8-80 de 45 44 Résiste 46 - de M -10% 20+ Serrage 100+ 75 54 RTL450-6 0-80 48 44 6xM6x35 TA 46 Couple -15% 40+ 60+ - Possibilité transmissibl 75 54 RTL450-6 5-85 Sur demande 40+ (Nm) effort 50 44 6xM6x35 -20% 60+ : acier série 60 20+ -25% 80 54 RTL450-7 0-90 6+ REMISES 55 -20% -25% T (Nm) axial e ou 44 7xM6x45 62 17 - Matière 1+ 100+ 80 -15% 54 *P . RTL450-7 5-95 Qté Sur 60 Uni. 44 disponibles 7xM8x50 62 17 demande Prix (N/mm W Prix -10% 85 54 d=300mm) RTL450-8 0-110 65 840 56 7xM8x50 Rem. 2 ) *P N 2 62 à 5 *P .Options 17 diamètres 90 54 ) 1 1 000 RTL450-8 5-115 alésage 70 Couple ou *P W (N/mm N 56 7xM8x50 62 295 41 F moyeu - Autres un 2 ) (N/mm 95 de 64 2 ) Prix 1 360 RTL450-9 0-120 23,73 F 75 56 7xM8x50 Couple transmissible sur le 62 246 41 (jusqu’à 110 Uni. effort axial (N/mm 64 l’arbre 2 740 RTL450-9 5-125 134 134 80 1 à 56 24,40 F 8xM8x50 72 174 Serrage T (Nm) 41 115 de surface sur 5 64 2 880 RTL450-1 0-130 134 295 134 85 70 8xM8x50 Vis surface 29,69 F 72 296 23,73 41 120 5-135 TA (Nm) .Info.. 840 64 Pression de 3 030 101 246 90 101 70 N : 9xM8x50 M 72 281 24,40 F 37,05 F 41 125 00-145 78 - * P W : Pression 3 240 150 17 1 000 95 174 70 C 150 72 10xM8x5 268 29,69 F 41 130 37,05 F 78 - * P 3 950 100 150 17 1 360 6xM6x35 70 L 296 88 10xM8x5 0 41 250 37,05 F 150 - 40,07 135 Se place 78 46 6xM6x35 4 150 150 F 17 70 2 740 B 88 10xM10x6 0 41 207 37,05 F 281 145 150 - Couple entre 40,07 F 78 40 5 150 150 46 7xM6x45 41 70 2 880 ØD 88 10xM10x6 0 41 200 40,07 F l'arbre 268 150 78 32 6 200 124 40 60 7xM8x50 - 46,19 F transmissibl 90 41 ØA 88 11xM10x6 0 83 et 205 40,07 F 3 030 250 124 Autocentran 78 46,19 F 55 6 750 32 54 62 7xM8x50 98 e très l'alésage 88 12xM10x6 0 83 202 46,19 F 41 - 98 Pression 3 240 100 207 11 500 25 52,30 F t 55 104 élevé 44 54 62 7xM8x50 88 12xM10x6 187 46,19 F Références 83 41 3 950 12 300 200 - 104 30 106 Montage 56,27 uniforméme 60 112 12xM10x6 0 83 44 54 62 7xM8x50 223 52,30 F F 41 4 150 14 500 205 - 106 RTL450-25-55 100 35 75 nt répartie 11xM12x8 0 83 44 54 Pas de 61,75 et F démontage 223 56,27 F 62 8xM8x50 41 0 15 400 5 150 202 114 RTL450-30-55 100 38 84,23 F 75 jeu 44 215 61,75 F 54 62 8xM8x50 0 83 17 800 41 6 200 facile 114 187 - Elimine RTL450-35-60 114 40 145 91,27 F 75 215 84,23 F 44 54 72 9xM8x50 18 700 41 6 750 115 223 contraintes concentrati RTL450-38-75 114 les 42 208 97,16 75 91,27 F 44 64 72 10xM8x50 41 26 300 F 115 11 500 223 RTL450-40-75 115 104,16 45 208 97,16 F clavette 80 ons de 56 dues 64 72 10xM8x50 83 115 104,16 F 12 300 - 215 RTL450-42-75 115 107,37 F aux rainures 200 48 80 56 64 Augmente 72 10xM10x60 83 115 107,37 F 14 500 215 RTL450-45-75 115 121,42 F 50 85 56 64 107 de 88 10xM10x60 83 F 121,42 F 15 400 l’arbre section 208 RTL450-48-80 115 la 163,08 55 90 56 78 88 11xM10x60 83 163,08 F résistante - Résiste 17 800 208 RTL450-50-80 107 60 95 70 78 88 12xM10x60 83 F de 18 - 700 200 aux mouvement RTL450-55-85 65 Possibilité 70 110 78 88 12xM10x60 83 26 300 RTL450-60-90 70 de monter s alternés 70 115 78 série 88 12xM10x60 145 RTL450-65-95 0 75 70 120 78 88 11xM12x80 - Matière 3 éléments RTL450-70-11 5 80 70 125 78 : acier 112 en RTL450-75-11 0 85 70 130 100 5 RTL450-80-12 90 90 135 RTL450-85-12 0 95 145 - Autres RTL450-90-13 5 100 (jusqu’à diamètres RTL450-95-13 45 disponibles un alésage RTL450-100-1 ple très serr age élev é aut ante centr 50 RTL4 o-ce ntr ge auto- RTL ant de serra e e élevé 450 Frett très le Coup RTL450_ FretteD eSerrag e 1/02/12 Frette Coupl .Options 16:03 Page 1 de serra e très élevé ge auto- C L B centrante RTL450 ØA ØD . .Info.. d=300mm) - * P N - * P W : Pression de : Pression surface de surface sur le moyeu sur l’arbre REMISES Références Qté 1+ ØA RTL450-25-55 Rem. Prix 6+ 20+ 40+ ØD RTL450-30-55 -10% -15% B 60+ 25 Couple de -20% -25% 100+ L 55 RTL450-35-60 Vis Couple 30 C Serrage transmissible Sur demande 32 55 RTL450-38-75 M 40 35 ou 32 46 6xM6x35 TA (Nm) T effort axial *P W 60 RTL450-40-75 40 38 (Nm) *P N 44 (N/mm 2 ) 46 6xM6x35 17 75 RTL450-42-75 54 40 (N/mm 2 ) Prix Uni. 44 60 7xM6x45 17 840 75 RTL450-45-75 54 42 1 à 5 295 44 1 000 62 7xM8x50 17 75 RTL450-48-80 134 54 45 246 44 23,73 F 1 360 62 7xM8x50 41 75 RTL450-50-80 134 54 48 174 44 24,40 F 2 740 62 7xM8x50 41 80 RTL450-55-85 101 54 50 296 44 29,69 F 2 880 62 7xM8x50 41 80 RTL450-60-90 150 54 55 281 56 37,05 F 3 030 62 8xM8x50 41 85 RTL450-65-95 150 64 60 268 56 37,05 F 3 240 72 8xM8x50 41 90 RTL450-70-110 150 64 65 250 56 40,07 F 3 950 72 9xM8x50 41 95 RTL450-75-115 150 64 70 207 56 40,07 F 4 150 110 72 10xM8x50 41 RTL450-80-120 124 64 75 200 70 46,19 F 5 150 115 72 10xM8x50 41 RTL450-85-125 98 78 80 205 70 46,19 F 6 200 120 88 10xM10x60 41 RTL450-90-130 104 78 85 202 70 52,30 F 6 750 125 88 10xM10x60 83 RTL450-95-135 106 78 90 187 70 56,27 F 11 500 130 88 11xM10x60 83 RTL450-100-14 100 78 95 223 70 61,75 F 12 300 135 88 12xM10x60 83 5 100 114 78 223 70 84,23 F 14 500 145 88 12xM10x60 83 114 78 215 90 91,27 F 15 400 88 12xM10x60 83 115 100 215 97,16 F 17 800 112 11xM12x80 83 115 208 104,16 18 700 115 F 145 208 107,37 26 300 115 F 200 121,42 107 F 163,08 F www.hpceurope.com “Catalogue“ section By post Fill in the request form on-line or complete this form and fax it to: Fax. +33(0)4 37 490 055 Company: .................................................................................................................................... Sector: .......................................................................................................................................... Business adress: .......................................................................................................................... Postcode: .................... Town: ............................................................Country:........................... q Mrs q Mr: ........................................................................................................................... Job title: ....................................................................................................................................... Tel.: .................................................................. Fax: ...................................................................... Size of company: q 0 to 50 q 51 to 150 q 151 to 400 q 401 + www.hpceurope.com allows you to : ORDER all of our products from our site DOWNLOAD files for all products from our CAD portal DOWNLOAD all our catalogues in PDF format Ask for our free catalogues Engrenages HPC 58, Chemin de la Bruyère 69570 Dardilly - Lyon - France Mail: cial2@hpceurope.com - Web: www.hpceurope.com Tel. +33(0)4 37 496 496 Fax. +33(0)4 37 490 055